Probe #2167b15aa8 of Gigabyte B550M K Desktop Computer

Log: smartctl

/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.5.0-9-generic] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Neo Forza NFS121SA312-6007000 Serial Number: -- LU WWN Device Id: 0 000000 ... Firmware Version: HCS1A25P User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: Not in smartctl database 7.3/5319 ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Oct 19 15:00:29 2023 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5d) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 4) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 9 Power_On_Hours -O--CK 100 100 050 - 5322 12 Power_Cycle_Count -O--CK 100 100 050 - 1124 160 Unknown_Attribute -O--CK 100 100 050 - 11 161 Unknown_Attribute -O--CK 100 100 050 - 100 163 Unknown_Attribute -O--CK 100 100 050 - 0 164 Unknown_Attribute -O--CK 100 100 050 - 24 165 Unknown_Attribute -O--CK 100 100 050 - 66 166 Unknown_Attribute -O--CK 100 100 050 - 5 167 Unknown_Attribute -O--CK 100 100 050 - 39 168 Unknown_Attribute -O--CK 100 100 050 - 0 169 Unknown_Attribute -O--CK 100 100 050 - 100 175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 37191 177 Wear_Leveling_Count -O--CK 100 100 050 - 17598176 178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 1 181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 192 Power-Off_Retract_Count -O--CK 100 100 050 - 6 194 Temperature_Celsius -O--CK 100 100 050 - 40 195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 196 Reallocated_Event_Count -O--CK 100 100 050 - 0 197 Current_Pending_Sector -O--CK 100 100 050 - 0 198 Offline_Uncorrectable -O--CK 100 100 050 - 0 199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 232 Available_Reservd_Space -O--CK 100 100 050 - 100 241 Total_LBAs_Written -O--CK 100 100 050 - 39549 242 Total_LBAs_Read -O--CK 100 100 050 - 64927 245 Unknown_Attribute -O--CK 100 100 050 - 80766 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 1 Comprehensive SMART error log 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 1 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 [0] occurred at disk power-on lifetime: 5308 hours (221 days + 4 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 40 00 40 00 0d 47 00 f9 e8 00 00 at LBA = 0xd4700f9e8 = 57025821160 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 10 00 40 00 0d 47 00 f9 e8 40 08 00:03:24.700 READ FPDMA QUEUED 60 00 08 00 38 00 0d 47 00 f9 d8 40 08 00:03:24.700 READ FPDMA QUEUED 60 01 d0 00 30 00 0d 46 00 f9 00 40 08 00:03:24.700 READ FPDMA QUEUED 60 01 f8 00 28 00 00 02 00 00 08 40 08 00:03:24.700 READ FPDMA QUEUED 60 00 f8 00 20 00 00 01 00 00 08 40 08 00:03:24.700 READ FPDMA QUEUED SMART Extended Self-test Log Version: 0 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1124 --- Lifetime Power-On Resets 0x01 0x010 4 5322 --- Power-on Hours 0x01 0x018 6 2591883264 --- Logical Sectors Written 0x01 0x020 6 26027785 --- Number of Write Commands 0x01 0x028 6 4255055872 --- Logical Sectors Read 0x01 0x030 6 55344999 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1124 --- Lifetime Power-On Resets 0x01 0x010 4 5322 --- Power-on Hours 0x01 0x018 6 2591883264 --- Logical Sectors Written 0x01 0x020 6 26027785 --- Number of Write Commands 0x01 0x028 6 4255055872 --- Logical Sectors Read 0x01 0x030 6 55344999 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1124 --- Lifetime Power-On Resets 0x01 0x010 4 5322 --- Power-on Hours 0x01 0x018 6 2591883264 --- Logical Sectors Written 0x01 0x020 6 26027785 --- Number of Write Commands 0x01 0x028 6 4255055872 --- Logical Sectors Read 0x01 0x030 6 55344999 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1124 --- Lifetime Power-On Resets 0x01 0x010 4 5322 --- Power-on Hours 0x01 0x018 6 2591883264 --- Logical Sectors Written 0x01 0x020 6 26027785 --- Number of Write Commands 0x01 0x028 6 4255055872 --- Logical Sectors Read 0x01 0x030 6 55344999 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1124 --- Lifetime Power-On Resets 0x01 0x010 4 5322 --- Power-on Hours 0x01 0x018 6 2591883264 --- Logical Sectors Written 0x01 0x020 6 26027785 --- Number of Write Commands 0x01 0x028 6 4255055872 --- Logical Sectors Read 0x01 0x030 6 55344999 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1124 --- Lifetime Power-On Resets 0x01 0x010 4 5322 --- Power-on Hours 0x01 0x018 6 2591883264 --- Logical Sectors Written 0x01 0x020 6 26027785 --- Number of Write Commands 0x01 0x028 6 4255055872 --- Logical Sectors Read 0x01 0x030 6 55344999 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1124 --- Lifetime Power-On Resets 0x01 0x010 4 5322 --- Power-on Hours 0x01 0x018 6 2591883264 --- Logical Sectors Written 0x01 0x020 6 26027785 --- Number of Write Commands 0x01 0x028 6 4255055872 --- Logical Sectors Read 0x01 0x030 6 55344999 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1124 --- Lifetime Power-On Resets 0x01 0x010 4 5322 --- Power-on Hours 0x01 0x018 6 2591883264 --- Logical Sectors Written 0x01 0x020 6 26027785 --- Number of Write Commands 0x01 0x028 6 4255055872 --- Logical Sectors Read 0x01 0x030 6 55344999 --- Number of Read Commands |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0009 4 4406 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 9643 Device-to-host register FISes sent due to a COMRESET 0x000b 4 1 CRC errors within host-to-device FIS 0x000d 4 1 Non-CRC errors within host-to-device FIS /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.5.0-9-generic] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD10EZEX-22MFCA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Oct 19 15:00:29 2023 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (10560) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 110) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 197 051 - 0 3 Spin_Up_Time POS--K 174 168 021 - 2266 4 Start_Stop_Count -O--CK 096 096 000 - 4703 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 071 071 000 - 21712 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 096 096 000 - 4144 192 Power-Off_Retract_Count -O--CK 200 200 000 - 122 193 Load_Cycle_Count -O--CK 198 198 000 - 7928 194 Temperature_Celsius -O---K 107 098 000 - 36 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 48 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 196 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 196 [3] occurred at disk power-on lifetime: 8882 hours (370 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 07 8d 25 ef 40 00 Error: UNC at LBA = 0x078d25ef = 126690799 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 08 00 00 07 8d 25 ef 40 00 15:10:40.187 READ FPDMA QUEUED ef 00 82 00 00 00 00 00 00 00 00 00 00 15:10:40.187 SET FEATURES [Disable write cache] 60 00 01 00 08 00 00 07 8d 25 ef 40 00 15:10:39.987 READ FPDMA QUEUED ef 00 82 00 00 00 00 00 00 00 00 00 00 15:10:39.987 SET FEATURES [Disable write cache] 60 00 01 00 08 00 00 07 8d 25 ef 40 00 15:10:39.787 READ FPDMA QUEUED Error 195 [2] occurred at disk power-on lifetime: 8882 hours (370 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 07 8d 25 ef 40 00 Error: UNC at LBA = 0x078d25ef = 126690799 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 08 00 00 07 8d 25 ef 40 00 15:10:39.987 READ FPDMA QUEUED ef 00 82 00 00 00 00 00 00 00 00 00 00 15:10:39.987 SET FEATURES [Disable write cache] 60 00 01 00 08 00 00 07 8d 25 ef 40 00 15:10:39.787 READ FPDMA QUEUED ef 00 82 00 00 00 00 00 00 00 00 00 00 15:10:39.787 SET FEATURES [Disable write cache] 60 00 01 00 08 00 00 07 8d 25 ef 40 00 15:10:39.587 READ FPDMA QUEUED Error 194 [1] occurred at disk power-on lifetime: 8882 hours (370 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 07 8d 25 ef 40 00 Error: UNC at LBA = 0x078d25ef = 126690799 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 08 00 00 07 8d 25 ef 40 00 15:10:39.787 READ FPDMA QUEUED ef 00 82 00 00 00 00 00 00 00 00 00 00 15:10:39.787 SET FEATURES [Disable write cache] 60 00 01 00 08 00 00 07 8d 25 ef 40 00 15:10:39.587 READ FPDMA QUEUED ef 00 82 00 00 00 00 00 00 00 00 00 00 15:10:39.587 SET FEATURES [Disable write cache] 60 00 01 00 08 00 00 07 8d 25 ef 40 00 15:10:39.388 READ FPDMA QUEUED Error 193 [0] occurred at disk power-on lifetime: 8882 hours (370 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 07 8d 25 ef 40 00 Error: UNC at LBA = 0x078d25ef = 126690799 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 08 00 00 07 8d 25 ef 40 00 15:10:39.587 READ FPDMA QUEUED ef 00 82 00 00 00 00 00 00 00 00 00 00 15:10:39.587 SET FEATURES [Disable write cache] 60 00 01 00 08 00 00 07 8d 25 ef 40 00 15:10:39.388 READ FPDMA QUEUED ef 00 82 00 00 00 00 00 00 00 00 00 00 15:10:39.388 SET FEATURES [Disable write cache] 60 00 01 00 08 00 00 07 8d 25 ef 40 00 15:10:39.188 READ FPDMA QUEUED Error 192 [23] occurred at disk power-on lifetime: 8882 hours (370 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 07 8d 25 ef 40 00 Error: UNC at LBA = 0x078d25ef = 126690799 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 08 00 00 07 8d 25 ef 40 00 15:10:39.388 READ FPDMA QUEUED ef 00 82 00 00 00 00 00 00 00 00 00 00 15:10:39.388 SET FEATURES [Disable write cache] 60 00 01 00 08 00 00 07 8d 25 ef 40 00 15:10:39.188 READ FPDMA QUEUED ef 00 82 00 00 00 00 00 00 00 00 00 00 15:10:39.188 SET FEATURES [Disable write cache] 60 00 01 00 08 00 00 07 8d 25 ef 40 00 15:10:38.988 READ FPDMA QUEUED Error 191 [22] occurred at disk power-on lifetime: 8882 hours (370 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 07 8d 25 ef 40 00 Error: UNC at LBA = 0x078d25ef = 126690799 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 08 00 00 07 8d 25 ef 40 00 15:10:39.188 READ FPDMA QUEUED ef 00 82 00 00 00 00 00 00 00 00 00 00 15:10:39.188 SET FEATURES [Disable write cache] 60 00 01 00 08 00 00 07 8d 25 ef 40 00 15:10:38.988 READ FPDMA QUEUED ef 00 82 00 00 00 00 00 00 00 00 00 00 15:10:38.988 SET FEATURES [Disable write cache] 60 00 01 00 10 00 00 07 8d 25 ef 40 00 15:10:38.788 READ FPDMA QUEUED Error 190 [21] occurred at disk power-on lifetime: 8882 hours (370 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 07 8d 25 ef 40 00 Error: UNC at LBA = 0x078d25ef = 126690799 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 08 00 00 07 8d 25 ef 40 00 15:10:38.988 READ FPDMA QUEUED ef 00 82 00 00 00 00 00 00 00 00 00 00 15:10:38.988 SET FEATURES [Disable write cache] 60 00 01 00 10 00 00 07 8d 25 ef 40 00 15:10:38.788 READ FPDMA QUEUED ef 00 82 00 00 00 00 00 00 00 00 00 00 15:10:38.788 SET FEATURES [Disable write cache] 60 00 01 00 08 00 00 07 8d 25 ef 40 00 15:10:38.589 READ FPDMA QUEUED Error 189 [20] occurred at disk power-on lifetime: 8882 hours (370 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 07 8d 25 ef 40 00 Error: UNC at LBA = 0x078d25ef = 126690799 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 10 00 00 07 8d 25 ef 40 00 15:10:38.788 READ FPDMA QUEUED ef 00 82 00 00 00 00 00 00 00 00 00 00 15:10:38.788 SET FEATURES [Disable write cache] 60 00 01 00 08 00 00 07 8d 25 ef 40 00 15:10:38.589 READ FPDMA QUEUED ef 00 02 00 00 00 00 00 00 00 00 00 00 15:10:38.588 SET FEATURES [Enable write cache] ef 00 82 00 00 00 00 00 00 00 00 a0 00 15:10:38.588 SET FEATURES [Disable write cache] SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 12617 - # 2 Extended offline Aborted by host 90% 11518 - # 3 Short offline Completed without error 00% 11518 - # 4 Short offline Completed without error 00% 10221 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 24/36 Celsius Lifetime Min/Max Temperature: 17/45 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (64) Index Estimated Time Temperature Celsius 65 2023-10-19 07:03 33 ************** ... ..(143 skipped). .. ************** 209 2023-10-19 09:27 33 ************** 210 2023-10-19 09:28 34 *************** 211 2023-10-19 09:29 34 *************** 212 2023-10-19 09:30 33 ************** ... ..( 20 skipped). .. ************** 233 2023-10-19 09:51 33 ************** 234 2023-10-19 09:52 34 *************** 235 2023-10-19 09:53 34 *************** 236 2023-10-19 09:54 34 *************** 237 2023-10-19 09:55 33 ************** ... ..( 4 skipped). .. ************** 242 2023-10-19 10:00 33 ************** 243 2023-10-19 10:01 34 *************** 244 2023-10-19 10:02 33 ************** ... ..( 9 skipped). .. ************** 254 2023-10-19 10:12 33 ************** 255 2023-10-19 10:13 34 *************** 256 2023-10-19 10:14 34 *************** 257 2023-10-19 10:15 34 *************** 258 2023-10-19 10:16 33 ************** ... ..( 13 skipped). .. ************** 272 2023-10-19 10:30 33 ************** 273 2023-10-19 10:31 34 *************** ... ..( 3 skipped). .. *************** 277 2023-10-19 10:35 34 *************** 278 2023-10-19 10:36 33 ************** ... ..( 32 skipped). .. ************** 311 2023-10-19 11:09 33 ************** 312 2023-10-19 11:10 ? - 313 2023-10-19 11:11 25 ****** 314 2023-10-19 11:12 24 ***** 315 2023-10-19 11:13 25 ****** 316 2023-10-19 11:14 26 ******* 317 2023-10-19 11:15 26 ******* 318 2023-10-19 11:16 27 ******** 319 2023-10-19 11:17 27 ******** 320 2023-10-19 11:18 28 ********* 321 2023-10-19 11:19 29 ********** 322 2023-10-19 11:20 29 ********** 323 2023-10-19 11:21 29 ********** 324 2023-10-19 11:22 30 *********** 325 2023-10-19 11:23 30 *********** 326 2023-10-19 11:24 30 *********** 327 2023-10-19 11:25 31 ************ 328 2023-10-19 11:26 31 ************ 329 2023-10-19 11:27 31 ************ 330 2023-10-19 11:28 32 ************* ... ..( 5 skipped). .. ************* 336 2023-10-19 11:34 32 ************* 337 2023-10-19 11:35 33 ************** ... ..( 7 skipped). .. ************** 345 2023-10-19 11:43 33 ************** 346 2023-10-19 11:44 34 *************** ... ..( 46 skipped). .. *************** 393 2023-10-19 12:31 34 *************** 394 2023-10-19 12:32 35 **************** ... ..( 11 skipped). .. **************** 406 2023-10-19 12:44 35 **************** 407 2023-10-19 12:45 34 *************** ... ..( 22 skipped). .. *************** 430 2023-10-19 13:08 34 *************** 431 2023-10-19 13:09 35 **************** ... ..( 21 skipped). .. **************** 453 2023-10-19 13:31 35 **************** 454 2023-10-19 13:32 36 ***************** ... ..( 81 skipped). .. ***************** 58 2023-10-19 14:54 36 ***************** 59 2023-10-19 14:55 33 ************** ... ..( 4 skipped). .. ************** 64 2023-10-19 15:00 33 ************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 7 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 13516 Vendor specific /dev/sdc smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.5.0-9-generic] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Silicon Motion based SSDs Device Model: ADATA SU650NS38 Serial Number: -- LU WWN Device Id: 5 000000 ... Firmware Version: P220823a User Capacity: 240,057,409,536 bytes [240 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: M.2 TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5319 ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Oct 19 15:00:29 2023 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 33) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0031) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 0 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 9 Power_On_Hours -O--C- 100 100 000 - 14 12 Power_Cycle_Count -O--C- 100 100 000 - 10 167 Average_Erase_Count -O---K 100 100 000 - 0 168 Max_Erase_Count_of_Spec -O--C- 100 100 000 - 0 169 Remaining_Lifetime_Perc PO--C- 099 099 010 - 458766 173 Unknown_Attribute -O--C- 200 200 000 - 8590327812 175 Program_Fail_Count_Chip -O---K 100 100 010 - 0 180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 --- - 181 192 Power-Off_Retract_Count -O--C- 100 100 --- - 7 194 Temperature_Celsius -O---K 066 066 030 - 34 (Min/Max 29/41) 231 SSD_Life_Left PO---K 100 100 005 - 0 233 Media_Wearout_Indicator -O--CK 100 100 000 - 74 234 Unknown_Attribute -O--CK 100 100 000 - 4226 241 Host_Writes_32MiB -O--CK 100 100 000 - 45 242 Host_Reads_32MiB -O--CK 100 100 000 - 70 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: ?/36 Celsius Lifetime Min/Max Temperature: ?/ ? Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: -127/127 Celsius Min/Max Temperature Limit: -127/127 Celsius Temperature History Size (Index): 478 (151) Index Estimated Time Temperature Celsius 152 2023-10-19 07:03 ? - ... ..(326 skipped). .. - 1 2023-10-19 12:30 ? - 2 2023-10-19 12:31 39 ******************** 3 2023-10-19 12:32 41 ********************** 4 2023-10-19 12:33 41 ********************** 5 2023-10-19 12:34 41 ********************** 6 2023-10-19 12:35 40 ********************* ... ..( 7 skipped). .. ********************* 14 2023-10-19 12:43 40 ********************* 15 2023-10-19 12:44 41 ********************** 16 2023-10-19 12:45 40 ********************* ... ..( 4 skipped). .. ********************* 21 2023-10-19 12:50 40 ********************* 22 2023-10-19 12:51 ? - 23 2023-10-19 12:52 ? - 24 2023-10-19 12:53 33 ************** 25 2023-10-19 12:54 34 *************** 26 2023-10-19 12:55 34 *************** 27 2023-10-19 12:56 34 *************** 28 2023-10-19 12:57 ? - 29 2023-10-19 12:58 34 *************** ... ..( 2 skipped). .. *************** 32 2023-10-19 13:01 34 *************** 33 2023-10-19 13:02 35 **************** 34 2023-10-19 13:03 35 **************** 35 2023-10-19 13:04 34 *************** 36 2023-10-19 13:05 35 **************** 37 2023-10-19 13:06 ? - 38 2023-10-19 13:07 33 ************** 39 2023-10-19 13:08 34 *************** 40 2023-10-19 13:09 34 *************** 41 2023-10-19 13:10 34 *************** 42 2023-10-19 13:11 ? - 43 2023-10-19 13:12 33 ************** 44 2023-10-19 13:13 34 *************** 45 2023-10-19 13:14 34 *************** 46 2023-10-19 13:15 ? - 47 2023-10-19 13:16 33 ************** 48 2023-10-19 13:17 34 *************** 49 2023-10-19 13:18 34 *************** 50 2023-10-19 13:19 34 *************** 51 2023-10-19 13:20 ? - 52 2023-10-19 13:21 34 *************** ... ..( 17 skipped). .. *************** 70 2023-10-19 13:39 34 *************** 71 2023-10-19 13:40 ? - 72 2023-10-19 13:41 ? - 73 2023-10-19 13:42 34 *************** 74 2023-10-19 13:43 ? - 75 2023-10-19 13:44 34 *************** ... ..( 2 skipped). .. *************** 78 2023-10-19 13:47 34 *************** 79 2023-10-19 13:48 36 ***************** ... ..( 2 skipped). .. ***************** 82 2023-10-19 13:51 36 ***************** 83 2023-10-19 13:52 35 **************** 84 2023-10-19 13:53 35 **************** 85 2023-10-19 13:54 36 ***************** 86 2023-10-19 13:55 35 **************** 87 2023-10-19 13:56 36 ***************** 88 2023-10-19 13:57 36 ***************** 89 2023-10-19 13:58 36 ***************** 90 2023-10-19 13:59 37 ****************** 91 2023-10-19 14:00 36 ***************** ... ..( 3 skipped). .. ***************** 95 2023-10-19 14:04 36 ***************** 96 2023-10-19 14:05 35 **************** 97 2023-10-19 14:06 34 *************** 98 2023-10-19 14:07 34 *************** 99 2023-10-19 14:08 33 ************** 100 2023-10-19 14:09 34 *************** 101 2023-10-19 14:10 34 *************** 102 2023-10-19 14:11 35 **************** 103 2023-10-19 14:12 35 **************** 104 2023-10-19 14:13 34 *************** ... ..( 4 skipped). .. *************** 109 2023-10-19 14:18 34 *************** 110 2023-10-19 14:19 35 **************** 111 2023-10-19 14:20 35 **************** 112 2023-10-19 14:21 34 *************** 113 2023-10-19 14:22 34 *************** 114 2023-10-19 14:23 34 *************** 115 2023-10-19 14:24 35 **************** 116 2023-10-19 14:25 34 *************** 117 2023-10-19 14:26 34 *************** 118 2023-10-19 14:27 35 **************** ... ..( 5 skipped). .. **************** 124 2023-10-19 14:33 35 **************** 125 2023-10-19 14:34 34 *************** ... ..( 4 skipped). .. *************** 130 2023-10-19 14:39 34 *************** 131 2023-10-19 14:40 35 **************** 132 2023-10-19 14:41 34 *************** 133 2023-10-19 14:42 35 **************** 134 2023-10-19 14:43 35 **************** 135 2023-10-19 14:44 34 *************** 136 2023-10-19 14:45 35 **************** 137 2023-10-19 14:46 34 *************** 138 2023-10-19 14:47 ? - 139 2023-10-19 14:48 33 ************** 140 2023-10-19 14:49 34 *************** 141 2023-10-19 14:50 35 **************** 142 2023-10-19 14:51 34 *************** 143 2023-10-19 14:52 35 **************** 144 2023-10-19 14:53 35 **************** 145 2023-10-19 14:54 35 **************** 146 2023-10-19 14:55 34 *************** 147 2023-10-19 14:56 35 **************** 148 2023-10-19 14:57 35 **************** 149 2023-10-19 14:58 35 **************** 150 2023-10-19 14:59 36 ***************** 151 2023-10-19 15:00 36 ***************** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 10 --- Lifetime Power-On Resets 0x01 0x010 4 14 --- Power-on Hours 0x01 0x018 6 95681464 --- Logical Sectors Written 0x01 0x020 6 923380 --- Number of Write Commands 0x01 0x028 6 147544620 --- Logical Sectors Read 0x01 0x030 6 1626050 --- Number of Read Commands 0x01 0x038 6 8632340692 --- Date and Time TimeStamp 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 6 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC


Hardware for Linux and BSD

GitHub