/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.15.0-desktop-122.124.1rosa-x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD10EZEX-08WN4A0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 02.01A02 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Dec 13 18:19:35 2020 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (11400) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 118) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 170 169 021 - 2500 4 Start_Stop_Count -O--CK 100 100 000 - 468 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 099 099 000 - 978 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 361 192 Power-Off_Retract_Count -O--CK 200 200 000 - 60 193 Load_Cycle_Count -O--CK 200 200 000 - 1143 194 Temperature_Celsius -O---K 107 093 000 - 36 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 48 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xdf GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 903 - # 2 Short offline Completed without error 00% 850 - # 3 Short offline Completed without error 00% 843 - # 4 Short offline Completed without error 00% 836 - # 5 Short offline Completed without error 00% 823 - # 6 Short offline Completed without error 00% 615 - # 7 Short offline Completed without error 00% 580 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 19/36 Celsius Lifetime Min/Max Temperature: 18/50 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (296) Index Estimated Time Temperature Celsius 297 2020-12-13 10:22 32 ************* 298 2020-12-13 10:23 32 ************* 299 2020-12-13 10:24 32 ************* 300 2020-12-13 10:25 33 ************** ... ..( 14 skipped). .. ************** 315 2020-12-13 10:40 33 ************** 316 2020-12-13 10:41 34 *************** ... ..( 27 skipped). .. *************** 344 2020-12-13 11:09 34 *************** 345 2020-12-13 11:10 33 ************** ... ..( 6 skipped). .. ************** 352 2020-12-13 11:17 33 ************** 353 2020-12-13 11:18 34 *************** 354 2020-12-13 11:19 34 *************** 355 2020-12-13 11:20 34 *************** 356 2020-12-13 11:21 33 ************** ... ..( 6 skipped). .. ************** 363 2020-12-13 11:28 33 ************** 364 2020-12-13 11:29 34 *************** ... ..( 34 skipped). .. *************** 399 2020-12-13 12:04 34 *************** 400 2020-12-13 12:05 35 **************** ... ..( 15 skipped). .. **************** 416 2020-12-13 12:21 35 **************** 417 2020-12-13 12:22 36 ***************** ... ..( 2 skipped). .. ***************** 420 2020-12-13 12:25 36 ***************** 421 2020-12-13 12:26 35 **************** ... ..( 23 skipped). .. **************** 445 2020-12-13 12:50 35 **************** 446 2020-12-13 12:51 34 *************** ... ..( 38 skipped). .. *************** 7 2020-12-13 13:30 34 *************** 8 2020-12-13 13:31 33 ************** ... ..( 21 skipped). .. ************** 30 2020-12-13 13:53 33 ************** 31 2020-12-13 13:54 34 *************** ... ..(122 skipped). .. *************** 154 2020-12-13 15:57 34 *************** 155 2020-12-13 15:58 35 **************** ... ..( 88 skipped). .. **************** 244 2020-12-13 17:27 35 **************** 245 2020-12-13 17:28 36 ***************** ... ..( 50 skipped). .. ***************** 296 2020-12-13 18:19 36 ***************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 30 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 36 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 33254 Vendor specific /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.15.0-desktop-122.124.1rosa-x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: SAMSUNG MZ7LN256HAJQ-000L2 Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: MVT04L0Q User Capacity: 256,060,514,304 bytes [256 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Dec 13 18:19:35 2020 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 099 099 000 - 983 12 Power_Cycle_Count -O--CK 099 099 000 - 373 170 Unused_Rsvd_Blk_Ct_Chip -O--CK 100 100 010 - 0 171 Program_Fail_Count_Chip -O--CK 100 100 010 - 0 172 Erase_Fail_Count_Chip -O--CK 100 100 010 - 0 173 Wear_Leveling_Count PO--CK 099 099 005 - 5 174 Unexpect_Power_Loss_Ct -O--CK 099 099 000 - 45 178 Used_Rsvd_Blk_Cnt_Chip PO--C- 100 100 010 - 0 180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 639 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 194 Temperature_Celsius -O--CK 066 047 000 - 34 (Min/Max 16/53) 199 CRC_Error_Count -OSRCK 099 099 000 - 2 233 Media_Wearout_Indicator PO--C- 099 099 001 - 16707309 234 Unknown_Samsung_Attr -O--CK 100 100 000 - 2 241 Total_LBAs_Written -O--CK 099 099 000 - 1470 242 Total_LBAs_Read -O--CK 099 099 000 - 4568 249 Unknown_Samsung_Attr -O--CK 099 099 000 - 2701 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xdf GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 907 - # 2 Short offline Completed without error 00% 854 - # 3 Short offline Completed without error 00% 847 - # 4 Short offline Completed without error 00% 840 - # 5 Short offline Completed without error 00% 826 - # 6 Short offline Completed without error 00% 619 - # 7 Short offline Completed without error 00% 583 - # 8 Short offline Completed without error 00% 258 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 26/34 Celsius Lifetime Min/Max Temperature: 22/52 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (100) Index Estimated Time Temperature Celsius 101 2020-12-12 21:00 27 ******** 102 2020-12-12 21:10 29 ********** 103 2020-12-12 21:20 30 *********** 104 2020-12-12 21:30 30 *********** 105 2020-12-12 21:40 31 ************ 106 2020-12-12 21:50 31 ************ 107 2020-12-12 22:00 31 ************ 108 2020-12-12 22:10 ? - 109 2020-12-12 22:20 29 ********** 110 2020-12-12 22:30 30 *********** 111 2020-12-12 22:40 31 ************ 112 2020-12-12 22:50 31 ************ 113 2020-12-12 23:00 32 ************* 114 2020-12-12 23:10 32 ************* 115 2020-12-12 23:20 33 ************** 116 2020-12-12 23:30 32 ************* 117 2020-12-12 23:40 31 ************ 118 2020-12-12 23:50 32 ************* 119 2020-12-13 00:00 33 ************** 120 2020-12-13 00:10 32 ************* 121 2020-12-13 00:20 35 **************** 122 2020-12-13 00:30 36 ***************** 123 2020-12-13 00:40 33 ************** 124 2020-12-13 00:50 35 **************** 125 2020-12-13 01:00 37 ****************** 126 2020-12-13 01:10 38 ******************* 127 2020-12-13 01:20 35 **************** 0 2020-12-13 01:30 33 ************** 1 2020-12-13 01:40 33 ************** 2 2020-12-13 01:50 33 ************** 3 2020-12-13 02:00 34 *************** 4 2020-12-13 02:10 33 ************** 5 2020-12-13 02:20 34 *************** 6 2020-12-13 02:30 36 ***************** 7 2020-12-13 02:40 32 ************* 8 2020-12-13 02:50 33 ************** 9 2020-12-13 03:00 34 *************** 10 2020-12-13 03:10 33 ************** 11 2020-12-13 03:20 38 ******************* 12 2020-12-13 03:30 39 ******************** 13 2020-12-13 03:40 37 ****************** 14 2020-12-13 03:50 36 ***************** 15 2020-12-13 04:00 37 ****************** 16 2020-12-13 04:10 37 ****************** 17 2020-12-13 04:20 35 **************** 18 2020-12-13 04:30 34 *************** 19 2020-12-13 04:40 33 ************** ... ..( 4 skipped). .. ************** 24 2020-12-13 05:30 33 ************** 25 2020-12-13 05:40 34 *************** 26 2020-12-13 05:50 35 **************** 27 2020-12-13 06:00 37 ****************** 28 2020-12-13 06:10 33 ************** 29 2020-12-13 06:20 33 ************** 30 2020-12-13 06:30 33 ************** 31 2020-12-13 06:40 34 *************** 32 2020-12-13 06:50 35 **************** 33 2020-12-13 07:00 34 *************** ... ..( 6 skipped). .. *************** 40 2020-12-13 08:10 34 *************** 41 2020-12-13 08:20 33 ************** 42 2020-12-13 08:30 34 *************** 43 2020-12-13 08:40 34 *************** 44 2020-12-13 08:50 34 *************** 45 2020-12-13 09:00 ? - 46 2020-12-13 09:10 26 ******* 47 2020-12-13 09:20 30 *********** 48 2020-12-13 09:30 30 *********** 49 2020-12-13 09:40 31 ************ 50 2020-12-13 09:50 31 ************ 51 2020-12-13 10:00 30 *********** 52 2020-12-13 10:10 30 *********** 53 2020-12-13 10:20 30 *********** 54 2020-12-13 10:30 31 ************ 55 2020-12-13 10:40 31 ************ 56 2020-12-13 10:50 30 *********** 57 2020-12-13 11:00 33 ************** 58 2020-12-13 11:10 31 ************ 59 2020-12-13 11:20 31 ************ 60 2020-12-13 11:30 31 ************ 61 2020-12-13 11:40 34 *************** 62 2020-12-13 11:50 33 ************** ... ..( 2 skipped). .. ************** 65 2020-12-13 12:20 33 ************** 66 2020-12-13 12:30 32 ************* 67 2020-12-13 12:40 31 ************ 68 2020-12-13 12:50 30 *********** 69 2020-12-13 13:00 31 ************ 70 2020-12-13 13:10 31 ************ 71 2020-12-13 13:20 29 ********** 72 2020-12-13 13:30 30 *********** 73 2020-12-13 13:40 31 ************ ... ..( 7 skipped). .. ************ 81 2020-12-13 15:00 31 ************ 82 2020-12-13 15:10 32 ************* 83 2020-12-13 15:20 32 ************* 84 2020-12-13 15:30 32 ************* 85 2020-12-13 15:40 31 ************ 86 2020-12-13 15:50 32 ************* ... ..( 4 skipped). .. ************* 91 2020-12-13 16:40 32 ************* 92 2020-12-13 16:50 33 ************** ... ..( 4 skipped). .. ************** 97 2020-12-13 17:40 33 ************** 98 2020-12-13 17:50 34 *************** 99 2020-12-13 18:00 34 *************** 100 2020-12-13 18:10 34 *************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 373 --- Lifetime Power-On Resets 0x01 0x010 4 983 --- Power-on Hours 0x01 0x018 6 3083519849 --- Logical Sectors Written 0x01 0x020 6 0 --- Number of Write Commands 0x01 0x028 6 9581482246 --- Logical Sectors Read 0x01 0x030 6 0 --- Number of Read Commands 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 4 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 34 --- Current Temperature 0x05 0x020 1 52 --- Highest Temperature 0x05 0x028 1 22 --- Lowest Temperature 0x05 0x058 1 55 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 4306 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 2 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 31 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 29 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC