/dev/nvme0n1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.3.3-x64v1-xanmod1-1] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Samsung SSD 980 PRO 500GB Serial Number: -- Firmware Version: 1B2QGXA7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 500,107,862,016 [500 GB] Unallocated NVM Capacity: 0 Controller ID: 6 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 500,107,862,016 [500 GB] Namespace 1 Utilization: 476,123,348,992 [476 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 ... Local Time is: Wed May 31 12:30:46 2023 MDT Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x0057): Comp Wr_Unc DS_Mngmt Sav/Sel_Feat Timestmp Log Page Attributes (0x0f): S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 82 Celsius Critical Comp. Temp. Threshold: 85 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 8.49W - - 0 0 0 0 0 0 1 + 4.48W - - 1 1 1 1 0 200 2 + 3.18W - - 2 2 2 2 0 1000 3 - 0.0400W - - 3 3 3 3 2000 1200 4 - 0.0050W - - 4 4 4 4 500 9500 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 52 Celsius Available Spare: 81% Available Spare Threshold: 10% Percentage Used: 5% Data Units Read: 15,050,924 [7.70 TB] Data Units Written: 22,765,747 [11.6 TB] Host Read Commands: 88,502,256 Host Write Commands: 194,923,390 Controller Busy Time: 3,392 Power Cycles: 373 Power On Hours: 15,793 Unsafe Shutdowns: 292 Media and Data Integrity Errors: 51 Error Information Log Entries: 51 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 52 Celsius Temperature Sensor 2: 56 Celsius Thermal Temp. 1 Transition Count: 2 Thermal Temp. 2 Transition Count: 1 Thermal Temp. 1 Total Time: 25 Thermal Temp. 2 Total Time: 608 Error Information (NVMe Log 0x01, 16 of 64 entries) No Errors Logged /dev/nvme1n1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.3.3-x64v1-xanmod1-1] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Samsung SSD 980 PRO 500GB Serial Number: -- Firmware Version: 1B2QGXA7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 500,107,862,016 [500 GB] Unallocated NVM Capacity: 0 Controller ID: 6 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 500,107,862,016 [500 GB] Namespace 1 Utilization: 284,510,322,688 [284 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 ... Local Time is: Wed May 31 12:30:46 2023 MDT Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x0057): Comp Wr_Unc DS_Mngmt Sav/Sel_Feat Timestmp Log Page Attributes (0x0f): S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 82 Celsius Critical Comp. Temp. Threshold: 85 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 8.49W - - 0 0 0 0 0 0 1 + 4.48W - - 1 1 1 1 0 200 2 + 3.18W - - 2 2 2 2 0 1000 3 - 0.0400W - - 3 3 3 3 2000 1200 4 - 0.0050W - - 4 4 4 4 500 9500 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 56 Celsius Available Spare: 64% Available Spare Threshold: 10% Percentage Used: 4% Data Units Read: 10,194,768 [5.21 TB] Data Units Written: 25,237,317 [12.9 TB] Host Read Commands: 68,445,091 Host Write Commands: 351,677,813 Controller Busy Time: 1,235 Power Cycles: 385 Power On Hours: 16,512 Unsafe Shutdowns: 297 Media and Data Integrity Errors: 1,021 Error Information Log Entries: 1,021 Warning Comp. Temperature Time: 7 Critical Comp. Temperature Time: 3 Temperature Sensor 1: 56 Celsius Temperature Sensor 2: 60 Celsius Thermal Temp. 1 Transition Count: 5 Thermal Temp. 2 Transition Count: 2 Thermal Temp. 1 Total Time: 149 Thermal Temp. 2 Total Time: 776 Error Information (NVMe Log 0x01, 16 of 64 entries) No Errors Logged /dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.3.3-x64v1-xanmod1-1] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 870 EVO 1TB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: SVT01B6Q User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5319 ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed May 31 12:30:46 2023 MDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 084 084 010 - 176 9 Power_On_Hours -O--CK 096 096 000 - 18501 12 Power_Cycle_Count -O--CK 099 099 000 - 364 177 Wear_Leveling_Count PO--C- 099 099 000 - 10 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 084 084 010 - 176 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 084 084 010 - 176 187 Uncorrectable_Error_Cnt -O--CK 099 099 000 - 3061 190 Airflow_Temperature_Cel -O--CK 063 032 000 - 37 195 ECC_Error_Rate -O-RC- 199 199 000 - 3061 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 282 241 Total_LBAs_Written -O--CK 099 099 000 - 13528364817 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 3187 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 3187 [2] occurred at disk power-on lifetime: 16002 hours (666 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 80 00 00 00 87 d7 40 40 00 Error: UNC at LBA = 0x0087d740 = 8902464 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 80 00 00 00 87 d7 40 40 10 14d+16:37:03.309 READ FPDMA QUEUED 47 00 00 00 01 00 00 00 00 00 00 40 0f 14d+16:37:03.309 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 06 30 40 0f 14d+16:37:03.309 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 00 30 40 0f 14d+16:37:03.309 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 00 00 40 0f 14d+16:37:03.309 READ LOG DMA EXT Error 3186 [1] occurred at disk power-on lifetime: 16002 hours (666 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 78 00 00 00 87 d7 40 40 00 Error: UNC at LBA = 0x0087d740 = 8902464 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 78 00 00 00 87 d7 40 40 0f 14d+16:37:03.120 READ FPDMA QUEUED 47 00 00 00 01 00 00 00 00 00 00 40 10 14d+16:37:03.120 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 06 30 40 10 14d+16:37:03.120 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 00 30 40 10 14d+16:37:03.120 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 00 00 40 10 14d+16:37:03.120 READ LOG DMA EXT Error 3185 [0] occurred at disk power-on lifetime: 16002 hours (666 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 80 00 00 00 87 d7 40 40 00 Error: UNC at LBA = 0x0087d740 = 8902464 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 80 00 00 00 87 d7 40 40 10 14d+16:37:02.937 READ FPDMA QUEUED 47 00 00 00 01 00 00 00 00 00 00 40 15 14d+16:37:02.937 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 06 30 40 15 14d+16:37:02.937 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 00 30 40 15 14d+16:37:02.937 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 00 00 40 15 14d+16:37:02.937 READ LOG DMA EXT Error 3184 [3] occurred at disk power-on lifetime: 16002 hours (666 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 a8 00 00 00 87 d7 40 40 00 Error: UNC at LBA = 0x0087d740 = 8902464 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 a8 00 00 00 87 d7 40 40 15 14d+16:37:02.741 READ FPDMA QUEUED 47 00 00 00 01 00 00 00 00 00 00 40 12 14d+16:37:02.741 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 06 30 40 12 14d+16:37:02.741 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 00 30 40 12 14d+16:37:02.741 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 00 00 40 12 14d+16:37:02.741 READ LOG DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 256 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 36/45 Celsius Lifetime Min/Max Temperature: 20/68 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (20) Index Estimated Time Temperature Celsius 21 2023-05-30 15:20 ? - ... ..( 4 skipped). .. - 26 2023-05-30 16:10 ? - 27 2023-05-30 16:20 45 ************************** 28 2023-05-30 16:30 ? - ... ..( 13 skipped). .. - 42 2023-05-30 18:50 ? - 43 2023-05-30 19:00 44 ************************* 44 2023-05-30 19:10 40 ********************* 45 2023-05-30 19:20 39 ******************** 46 2023-05-30 19:30 38 ******************* 47 2023-05-30 19:40 37 ****************** 48 2023-05-30 19:50 37 ****************** 49 2023-05-30 20:00 ? - ... ..( 2 skipped). .. - 52 2023-05-30 20:30 ? - 53 2023-05-30 20:40 40 ********************* 54 2023-05-30 20:50 ? - ... ..( 12 skipped). .. - 67 2023-05-30 23:00 ? - 68 2023-05-30 23:10 44 ************************* 69 2023-05-30 23:20 ? - ... ..( 9 skipped). .. - 79 2023-05-31 01:00 ? - 80 2023-05-31 01:10 39 ******************** 81 2023-05-31 01:20 ? - ... ..( 12 skipped). .. - 94 2023-05-31 03:30 ? - 95 2023-05-31 03:40 38 ******************* 96 2023-05-31 03:50 ? - 97 2023-05-31 04:00 ? - 98 2023-05-31 04:10 37 ****************** 99 2023-05-31 04:20 38 ******************* 100 2023-05-31 04:30 37 ****************** 101 2023-05-31 04:40 37 ****************** 102 2023-05-31 04:50 36 ***************** ... ..( 4 skipped). .. ***************** 107 2023-05-31 05:40 36 ***************** 108 2023-05-31 05:50 37 ****************** 109 2023-05-31 06:00 36 ***************** 110 2023-05-31 06:10 37 ****************** 111 2023-05-31 06:20 36 ***************** ... ..( 9 skipped). .. ***************** 121 2023-05-31 08:00 36 ***************** 122 2023-05-31 08:10 37 ****************** ... ..( 13 skipped). .. ****************** 8 2023-05-31 10:30 37 ****************** 9 2023-05-31 10:40 38 ******************* ... ..( 5 skipped). .. ******************* 15 2023-05-31 11:40 38 ******************* 16 2023-05-31 11:50 39 ******************** ... ..( 2 skipped). .. ******************** 19 2023-05-31 12:20 39 ******************** 20 2023-05-31 12:30 38 ******************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 364 --- Lifetime Power-On Resets 0x01 0x010 4 18501 --- Power-on Hours 0x01 0x018 6 13528364817 --- Logical Sectors Written 0x01 0x020 6 62752780 --- Number of Write Commands 0x01 0x028 6 8249254034 --- Logical Sectors Read 0x01 0x030 6 147286503 --- Number of Read Commands 0x01 0x038 6 3039000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 3061 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 37 --- Current Temperature 0x05 0x020 1 68 --- Highest Temperature 0x05 0x028 1 20 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 5436 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 1155 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 78 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC