/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-52-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 860 EVO 500GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: RVT04B6Q User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Oct 25 22:17:08 2022 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 096 096 000 - 15213 12 Power_Cycle_Count -O--CK 098 098 000 - 1163 177 Wear_Leveling_Count PO--C- 093 093 000 - 93 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 071 047 000 - 29 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 099 099 000 - 1 235 POR_Recovery_Count -O--C- 099 099 000 - 38 241 Total_LBAs_Written -O--CK 099 099 000 - 59882782185 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 29 Celsius Power Cycle Min/Max Temperature: 25/40 Celsius Lifetime Min/Max Temperature: 17/53 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (104) Index Estimated Time Temperature Celsius 105 2022-10-25 01:00 27 ******** ... ..( 2 skipped). .. ******** 108 2022-10-25 01:30 27 ******** 109 2022-10-25 01:40 28 ********* 110 2022-10-25 01:50 28 ********* 111 2022-10-25 02:00 27 ******** ... ..( 18 skipped). .. ******** 2 2022-10-25 05:10 27 ******** 3 2022-10-25 05:20 26 ******* 4 2022-10-25 05:30 28 ********* 5 2022-10-25 05:40 27 ******** 6 2022-10-25 05:50 26 ******* 7 2022-10-25 06:00 29 ********** 8 2022-10-25 06:10 26 ******* 9 2022-10-25 06:20 25 ****** 10 2022-10-25 06:30 25 ****** 11 2022-10-25 06:40 24 ***** ... ..( 6 skipped). .. ***** 18 2022-10-25 07:50 24 ***** 19 2022-10-25 08:00 27 ******** 20 2022-10-25 08:10 24 ***** ... ..( 2 skipped). .. ***** 23 2022-10-25 08:40 24 ***** 24 2022-10-25 08:50 23 **** 25 2022-10-25 09:00 23 **** 26 2022-10-25 09:10 24 ***** 27 2022-10-25 09:20 24 ***** 28 2022-10-25 09:30 23 **** ... ..( 2 skipped). .. **** 31 2022-10-25 10:00 23 **** 32 2022-10-25 10:10 24 ***** 33 2022-10-25 10:20 23 **** 34 2022-10-25 10:30 23 **** 35 2022-10-25 10:40 23 **** 36 2022-10-25 10:50 24 ***** 37 2022-10-25 11:00 23 **** ... ..( 33 skipped). .. **** 71 2022-10-25 16:40 23 **** 72 2022-10-25 16:50 ? - 73 2022-10-25 17:00 30 *********** 74 2022-10-25 17:10 26 ******* 75 2022-10-25 17:20 ? - 76 2022-10-25 17:30 24 ***** 77 2022-10-25 17:40 ? - 78 2022-10-25 17:50 ? - 79 2022-10-25 18:00 24 ***** 80 2022-10-25 18:10 25 ****** 81 2022-10-25 18:20 26 ******* 82 2022-10-25 18:30 27 ******** 83 2022-10-25 18:40 ? - ... ..( 2 skipped). .. - 86 2022-10-25 19:10 ? - 87 2022-10-25 19:20 27 ******** 88 2022-10-25 19:30 26 ******* 89 2022-10-25 19:40 ? - ... ..( 5 skipped). .. - 95 2022-10-25 20:40 ? - 96 2022-10-25 20:50 30 *********** 97 2022-10-25 21:00 29 ********** 98 2022-10-25 21:10 30 *********** 99 2022-10-25 21:20 ? - 100 2022-10-25 21:30 28 ********* 101 2022-10-25 21:40 ? - 102 2022-10-25 21:50 25 ****** 103 2022-10-25 22:00 ? - 104 2022-10-25 22:10 25 ****** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1163 --- Lifetime Power-On Resets 0x01 0x010 4 15213 --- Power-on Hours 0x01 0x018 6 59882782185 --- Logical Sectors Written 0x01 0x020 6 585889719 --- Number of Write Commands 0x01 0x028 6 95745114417 --- Logical Sectors Read 0x01 0x030 6 1497557776 --- Number of Read Commands 0x01 0x038 6 1117000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 407 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 29 --- Current Temperature 0x05 0x020 1 53 --- Highest Temperature 0x05 0x028 1 17 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 7990 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 1 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 6 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 415 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC