/dev/nvme0n1 === START OF INFORMATION SECTION === Model Number: CHN-NGFFNV2280-256 Serial Number: -- Firmware Version: S0107A3 PCI Vendor/Subsystem ID: 0x126f IEEE OUI Identifier: 0x000000 Controller ID: 1 Number of Namespaces: 1 Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 010000 ... Local Time is: Tue Feb 13 14:54:45 2024 CET Firmware Updates (0x12): 1 Slot, no Reset required Optional Admin Commands (0x0006): Format Frmw_DL Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Maximum Data Transfer Size: 64 Pages Warning Comp. Temp. Threshold: 70 Celsius Critical Comp. Temp. Threshold: 80 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 9.00W - - 0 0 0 0 0 0 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 43 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 1% Data Units Read: 14,967,791 [7.66 TB] Data Units Written: 10,219,902 [5.23 TB] Host Read Commands: 357,636,500 Host Write Commands: 225,453,630 Controller Busy Time: 15,519 Power Cycles: 3,765 Power On Hours: 5,490 Unsafe Shutdowns: 397 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 482 Critical Comp. Temperature Time: 0 Error Information (NVMe Log 0x01, max 64 entries) No Errors Logged /dev/sda === START OF INFORMATION SECTION === Model Family: WD Blue and Green SSDs Device Model: WDC WDS240G2G0B-00EPW0 Serial Number: -- LU WWN Device Id: 5 001b44 ... Firmware Version: UJ450000 User Capacity: 240,065,183,744 bytes [240 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: M.2 Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Feb 13 14:54:45 2024 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 32) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x15) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 42) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 9 Power_On_Hours -O--CK 100 100 000 - 2183 12 Power_Cycle_Count -O--CK 100 100 000 - 1822 165 Block_Erase_Count -O--CK 100 100 000 - 671 166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 6 167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 0 168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 9 169 Total_Bad_Blocks -O--CK 100 100 --- - 206 170 Grown_Bad_Blocks -O--CK 100 100 --- - 0 171 Program_Fail_Count -O--CK 100 100 000 - 0 172 Erase_Fail_Count -O--CK 100 100 000 - 0 173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 6 174 Unexpected_Power_Loss -O--CK 100 100 000 - 464 184 End-to-End_Error -O--CK 100 100 --- - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 --- - 0 194 Temperature_Celsius -O---K 074 046 000 - 26 (Min/Max 10/46) 199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x015b0114015b 232 Available_Reservd_Space PO--CK 100 100 005 - 100 233 NAND_GB_Written_TLC -O--CK 100 100 --- - 1528 234 NAND_GB_Written_SLC -O--CK 100 100 000 - 5117 241 Host_Writes_GiB ----CK 100 100 000 - 2112 242 Host_Reads_GiB ----CK 100 100 000 - 2082 244 Temp_Throttle_Status -O--CK 000 100 --- - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 16 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 1 Device vendor specific log 0xa2 GPL,SL VS 2 Device vendor specific log 0xa3 GPL,SL VS 1 Device vendor specific log 0xa7 GPL,SL VS 1 Device vendor specific log 0xa9 GPL,SL VS 3 Device vendor specific log Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. SMART Extended Comprehensive Error Log Version: 1 (16 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1792 - # 2 Extended offline Completed without error 00% 1296 - Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1822 --- Lifetime Power-On Resets 0x01 0x010 4 2183 --- Power-on Hours 0x01 0x018 6 4429555316 --- Logical Sectors Written 0x01 0x028 6 4367418111 --- Logical Sectors Read 0x01 0x038 6 2183 --- Date and Time TimeStamp 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 26 --- Current Temperature 0x05 0x010 1 - --- Average Short Term Temperature 0x05 0x018 1 - --- Average Long Term Temperature 0x05 0x020 1 45 --- Highest Temperature 0x05 0x028 1 22 --- Lowest Temperature 0x05 0x030 1 36 --- Highest Average Short Term Temperature 0x05 0x038 1 36 --- Lowest Average Short Term Temperature 0x05 0x040 1 - --- Highest Average Long Term Temperature 0x05 0x048 1 - --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 95 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 1 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0001 2 0 Command failed due to ICRC error /dev/sdb === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F1 DT Device Model: SAMSUNG HD103UJ Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 1AA01113 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b Local Time is: Tue Feb 13 14:54:45 2024 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (11266) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 189) minutes. Conveyance self-test routine recommended polling time: ( 20) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 096 051 - 1 3 Spin_Up_Time POS--- 074 074 011 - 8630 4 Start_Stop_Count -O--CK 088 088 000 - 12275 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 100 100 051 - 0 8 Seek_Time_Performance P-S--K 100 100 015 - 10268 9 Power_On_Hours -O--CK 093 093 000 - 35258 10 Spin_Retry_Count PO--CK 100 100 051 - 2 11 Calibration_Retry_Count -O--C- 100 100 000 - 0 12 Power_Cycle_Count -O--CK 090 090 000 - 10151 13 Read_Soft_Error_Rate -OSR-- 100 096 000 - 1 183 Runtime_Bad_Block -O--CK 100 100 000 - 177 184 End-to-End_Error PO--CK 001 001 000 - 225 187 Reported_Uncorrect -O--CK 100 100 000 - 708 188 Command_Timeout -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 083 050 000 - 17 (Min/Max 17/17) 194 Temperature_Celsius -O---K 082 049 000 - 18 (Min/Max 17/18) 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 6017 196 Reallocated_Event_Count -O--CK 100 100 000 - 19 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 100 099 000 - 17103 200 Multi_Zone_Error_Rate -O-R-- 100 099 000 - 0 201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x04 GPL R/O 2 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 2 Write stream error log 0x22 GPL R/O 2 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 17801 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 17801 [0] occurred at disk power-on lifetime: 31201 hours (1300 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 80 00 01 00 00 00 00 00 01 a0 00 at LBA = 0x00000001 = 1 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 00 00 00 08 40 00 00:06:46.710 READ FPDMA QUEUED 60 00 00 00 08 00 00 00 00 00 00 40 00 00:06:46.680 READ FPDMA QUEUED 60 00 00 00 08 00 00 00 70 6d a8 40 00 00:06:46.680 READ FPDMA QUEUED ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:06:46.680 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:06:46.680 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 17800 [7] occurred at disk power-on lifetime: 31201 hours (1300 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 80 00 01 00 00 00 00 00 01 a0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 00 00 00 01 00 00 00 00 00 01 a0 ff 00:05:19.530 NOP [Abort queued commands] 60 00 00 00 08 00 00 00 fc 58 00 40 00 00:05:16.940 READ FPDMA QUEUED 60 00 00 00 08 00 00 00 00 00 00 40 00 00:05:11.090 READ FPDMA QUEUED e0 00 00 00 00 00 00 00 00 00 00 a0 08 00:05:10.230 STANDBY IMMEDIATE ea 00 00 00 00 00 00 00 00 00 00 a0 08 00:05:10.230 FLUSH CACHE EXT Error 17799 [6] occurred at disk power-on lifetime: 31201 hours (1300 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 80 00 01 00 00 00 00 00 01 a0 00 at LBA = 0x00000001 = 1 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 00 00 00 00 40 00 00:04:38.370 READ FPDMA QUEUED e0 00 00 00 00 00 00 00 00 00 00 a0 08 00:04:37.500 STANDBY IMMEDIATE ea 00 00 00 00 00 00 00 00 00 00 a0 08 00:04:37.500 FLUSH CACHE EXT ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:04:37.490 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:04:37.490 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 17798 [5] occurred at disk power-on lifetime: 31201 hours (1300 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 80 00 01 00 00 00 00 00 01 a0 00 at LBA = 0x00000001 = 1 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 00 fc 58 00 40 00 00:03:54.540 READ FPDMA QUEUED 60 00 00 00 08 00 00 00 00 00 00 40 00 00:03:48.690 READ FPDMA QUEUED e0 00 00 00 00 00 00 00 00 00 00 a0 08 00:03:47.820 STANDBY IMMEDIATE ea 00 00 00 00 00 00 00 00 00 00 a0 08 00:03:47.820 FLUSH CACHE EXT ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:03:47.820 SET FEATURES [Enable SATA feature] Error 17797 [4] occurred at disk power-on lifetime: 31201 hours (1300 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 80 00 01 00 00 00 00 00 01 a0 00 at LBA = 0x00000001 = 1 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 00 fc 58 00 40 00 00:03:27.820 READ FPDMA QUEUED 60 00 00 00 08 00 00 00 00 00 00 40 00 00:03:27.810 READ FPDMA QUEUED ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:03:27.810 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:03:27.810 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:03:27.810 IDENTIFY DEVICE Error 17796 [3] occurred at disk power-on lifetime: 31201 hours (1300 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 80 00 01 00 00 00 00 00 01 a0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 00 00 00 01 00 00 00 00 00 01 a0 ff 00:03:21.850 NOP [Abort queued commands] 60 00 00 00 08 00 00 00 00 00 00 40 00 00:03:13.420 READ FPDMA QUEUED e0 00 00 00 00 00 00 00 00 00 00 a0 08 00:03:12.550 STANDBY IMMEDIATE ea 00 00 00 00 00 00 00 00 00 00 a0 08 00:03:12.550 FLUSH CACHE EXT ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:03:12.550 SET FEATURES [Enable SATA feature] Error 17795 [2] occurred at disk power-on lifetime: 31201 hours (1300 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 80 00 01 00 00 00 00 00 01 a0 00 at LBA = 0x00000001 = 1 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 00 00 00 00 40 00 00:02:35.250 READ FPDMA QUEUED e0 00 00 00 00 00 00 00 00 00 00 a0 08 00:02:34.380 STANDBY IMMEDIATE ea 00 00 00 00 00 00 00 00 00 00 a0 08 00:02:34.380 FLUSH CACHE EXT ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:02:34.380 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:02:34.380 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 17794 [1] occurred at disk power-on lifetime: 31201 hours (1300 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 80 00 01 00 00 00 00 00 01 a0 00 at LBA = 0x00000001 = 1 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 00 70 6d 00 40 00 00:01:56.940 READ FPDMA QUEUED ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:01:56.940 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:01:56.940 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:01:56.930 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:01:56.930 SET FEATURES [Set transfer mode] SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 34867 - # 2 Extended offline Aborted by host 90% 33761 - # 3 Extended offline Completed: read failure 70% 33725 304637199 # 4 Short offline Completed without error 00% 33627 - # 5 Extended offline Completed: read failure 70% 31852 304637199 # 6 Short offline Completed without error 00% 31810 - # 7 Short offline Completed without error 00% 24760 - # 8 Short offline Completed without error 00% 24749 - # 9 Extended offline Aborted by host 90% 24718 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 18 Celsius Power Cycle Min/Max Temperature: --/18 Celsius Lifetime Min/Max Temperature: --/52 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: -4/72 Celsius Min/Max Temperature Limit: -9/77 Celsius Temperature History Size (Index): 128 (68) Index Estimated Time Temperature Celsius 69 2024-02-13 12:47 31 ************ ... ..( 5 skipped). .. ************ 75 2024-02-13 12:53 31 ************ 76 2024-02-13 12:54 32 ************* ... ..( 11 skipped). .. ************* 88 2024-02-13 13:06 32 ************* 89 2024-02-13 13:07 33 ************** ... ..( 33 skipped). .. ************** 123 2024-02-13 13:41 33 ************** 124 2024-02-13 13:42 34 *************** ... ..( 2 skipped). .. *************** 127 2024-02-13 13:45 34 *************** 0 2024-02-13 13:46 17 - 1 2024-02-13 13:47 17 - 2 2024-02-13 13:48 18 - 3 2024-02-13 13:49 19 - 4 2024-02-13 13:50 19 - 5 2024-02-13 13:51 20 * 6 2024-02-13 13:52 21 ** 7 2024-02-13 13:53 21 ** 8 2024-02-13 13:54 22 *** 9 2024-02-13 13:55 22 *** 10 2024-02-13 13:56 23 **** 11 2024-02-13 13:57 23 **** 12 2024-02-13 13:58 24 ***** 13 2024-02-13 13:59 24 ***** 14 2024-02-13 14:00 25 ****** 15 2024-02-13 14:01 25 ****** 16 2024-02-13 14:02 25 ****** 17 2024-02-13 14:03 26 ******* 18 2024-02-13 14:04 26 ******* 19 2024-02-13 14:05 26 ******* 20 2024-02-13 14:06 27 ******** ... ..( 2 skipped). .. ******** 23 2024-02-13 14:09 27 ******** 24 2024-02-13 14:10 28 ********* ... ..( 2 skipped). .. ********* 27 2024-02-13 14:13 28 ********* 28 2024-02-13 14:14 29 ********** ... ..( 3 skipped). .. ********** 32 2024-02-13 14:18 29 ********** 33 2024-02-13 14:19 30 *********** ... ..( 6 skipped). .. *********** 40 2024-02-13 14:26 30 *********** 41 2024-02-13 14:27 31 ************ ... ..( 9 skipped). .. ************ 51 2024-02-13 14:37 31 ************ 52 2024-02-13 14:38 32 ************* ... ..( 7 skipped). .. ************* 60 2024-02-13 14:46 32 ************* 61 2024-02-13 14:47 17 - 62 2024-02-13 14:48 17 - 63 2024-02-13 14:49 17 - 64 2024-02-13 14:50 18 - ... ..( 3 skipped). .. - 68 2024-02-13 14:54 18 - SCT Error Recovery Control: Read: Disabled Write: Disabled ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: scsi error badly formed scsi parameters Read Device Statistics page 0x00 failed Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC