/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.83-generic-2rosa-x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA (AF) Device Model: WDC WD7500BPVT-75HXZT3 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 03.01A03 User Capacity: 750,156,374,016 bytes [750 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Apr 8 19:50:52 2021 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (16800) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 165) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 174 173 021 - 2258 4 Start_Stop_Count -O--CK 092 092 000 - 8277 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 070 070 000 - 22320 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 093 093 000 - 7893 191 G-Sense_Error_Rate -O--CK 001 001 000 - 141917 192 Power-Off_Retract_Count -O--CK 199 199 000 - 846 193 Load_Cycle_Count -O--CK 175 175 000 - 76072 194 Temperature_Celsius -O---K 105 075 000 - 42 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 240 Head_Flying_Hours -O--CK 071 071 000 - 21838 241 Total_LBAs_Written -O--CK 200 200 000 - 119107515293 242 Total_LBAs_Read -O--CK 200 200 000 - 183349257563 254 Free_Fall_Sensor -O--CK 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 22313 - # 2 Short offline Interrupted (host reset) 80% 22305 - # 3 Extended offline Completed without error 00% 22295 - # 4 Short offline Completed without error 00% 22216 - # 5 Short offline Aborted by host 10% 22208 - # 6 Extended offline Completed without error 00% 22165 - # 7 Short offline Aborted by host 90% 21980 - # 8 Short offline Completed without error 00% 21980 - # 9 Short offline Completed without error 00% 21677 - #10 Short offline Completed without error 00% 20937 - #11 Short offline Completed without error 00% 20557 - #12 Short offline Completed without error 00% 19433 - #13 Short offline Completed without error 00% 19207 - #14 Short offline Completed without error 00% 19207 - #15 Short offline Completed without error 00% 19106 - #16 Short offline Completed without error 00% 19079 - #17 Short offline Completed without error 00% 19061 - #18 Short offline Completed without error 00% 17752 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 42 Celsius Power Cycle Min/Max Temperature: 41/44 Celsius Lifetime Min/Max Temperature: 0/73 Celsius Specified Max Operating Temperature: 33 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (102) Index Estimated Time Temperature Celsius 103 2021-04-08 17:43 41 ********************** ... ..( 6 skipped). .. ********************** 110 2021-04-08 17:50 41 ********************** 111 2021-04-08 17:51 ? - 112 2021-04-08 17:52 43 ************************ 113 2021-04-08 17:53 44 ************************* ... ..( 4 skipped). .. ************************* 118 2021-04-08 17:58 44 ************************* 119 2021-04-08 17:59 43 ************************ 120 2021-04-08 18:00 43 ************************ 121 2021-04-08 18:01 43 ************************ 122 2021-04-08 18:02 42 *********************** ... ..( 7 skipped). .. *********************** 2 2021-04-08 18:10 42 *********************** 3 2021-04-08 18:11 41 ********************** ... ..( 31 skipped). .. ********************** 35 2021-04-08 18:43 41 ********************** 36 2021-04-08 18:44 42 *********************** 37 2021-04-08 18:45 41 ********************** ... ..( 14 skipped). .. ********************** 52 2021-04-08 19:00 41 ********************** 53 2021-04-08 19:01 42 *********************** ... ..( 29 skipped). .. *********************** 83 2021-04-08 19:31 42 *********************** 84 2021-04-08 19:32 41 ********************** ... ..( 14 skipped). .. ********************** 99 2021-04-08 19:47 41 ********************** 100 2021-04-08 19:48 42 *********************** 101 2021-04-08 19:49 42 *********************** 102 2021-04-08 19:50 42 *********************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 50136 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 7160 Vendor specific