/dev/sda === START OF INFORMATION SECTION === Model Family: Hitachi Ultrastar A7K2000 Device Model: Hitachi HUA722010CLA330 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JP4OA3EA User Capacity: 1 000 204 886 016 bytes [1,00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sat Jul 25 18:14:03 2015 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 9812) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 164) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 136 136 054 - 95 3 Spin_Up_Time POS--- 123 123 024 - 308 (Average 305) 4 Start_Stop_Count -O--C- 100 100 000 - 2399 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 138 138 020 - 31 9 Power_On_Hours -O--C- 100 100 000 - 6018 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 1783 192 Power-Off_Retract_Count -O--CK 098 098 000 - 2407 193 Load_Cycle_Count -O--C- 098 098 000 - 2407 194 Temperature_Celsius -O---- 153 153 000 - 39 (Min/Max 18/49) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 1 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 0 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 2069 - # 2 Short offline Completed without error 00% 2025 - # 3 Short offline Completed without error 00% 1895 - # 4 Short offline Completed without error 00% 1817 - # 5 Short offline Completed without error 00% 1803 - # 6 Short offline Completed without error 00% 1667 - # 7 Short offline Completed without error 00% 1417 - # 8 Short offline Completed without error 00% 1416 - # 9 Short offline Completed without error 00% 1390 - #10 Short offline Completed without error 00% 1383 - #11 Short offline Completed without error 00% 1288 - #12 Short offline Completed without error 00% 1248 - #13 Short offline Completed without error 00% 1214 - #14 Short offline Completed without error 00% 1210 - #15 Short offline Completed without error 00% 1197 - #16 Short offline Completed without error 00% 1138 - #17 Short offline Completed without error 00% 1124 - #18 Short offline Completed without error 00% 1112 - #19 Short offline Completed without error 00% 1101 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 39 Celsius Power Cycle Min/Max Temperature: 29/42 Celsius Lifetime Min/Max Temperature: 18/49 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (11) Index Estimated Time Temperature Celsius 12 2015-07-25 16:07 38 ******************* ... ..( 60 skipped). .. ******************* 73 2015-07-25 17:08 38 ******************* 74 2015-07-25 17:09 39 ******************** ... ..( 64 skipped). .. ******************** 11 2015-07-25 18:14 39 ******************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Description 1 ===== = = == General Statistics (rev 1) == 1 0x008 4 1783 Lifetime Power-On Resets 1 0x010 4 6018 Power-on Hours 1 0x018 6 61104572415 Logical Sectors Written 1 0x020 6 307770755 Number of Write Commands 1 0x028 6 261928164206 Logical Sectors Read 1 0x030 6 561320596 Number of Read Commands 3 ===== = = == Rotating Media Statistics (rev 1) == 3 0x008 4 5779 Spindle Motor Power-on Hours 3 0x010 4 5779 Head Flying Hours 3 0x018 4 2407 Head Load Events 3 0x020 4 0 Number of Reallocated Logical Sectors 3 0x028 4 207 Read Recovery Attempts 3 0x030 4 4294967295 Number of Mechanical Start Failures 4 ===== = = == General Errors Statistics (rev 1) == 4 0x008 4 0 Number of Reported Uncorrectable Errors 4 0x010 4 6460 Resets Between Cmd Acceptance and Completion 5 ===== = = == Temperature Statistics (rev 1) == 5 0x008 1 39 Current Temperature 5 0x010 1 38~ Average Short Term Temperature 5 0x018 1 35~ Average Long Term Temperature 5 0x020 1 49 Highest Temperature 5 0x028 1 18 Lowest Temperature 5 0x030 1 39~ Highest Average Short Term Temperature 5 0x038 1 0~ Lowest Average Short Term Temperature 5 0x040 1 37~ Highest Average Long Term Temperature 5 0x048 1 0~ Lowest Average Long Term Temperature 5 0x050 4 0 Time in Over-Temperature 5 0x058 1 60 Specified Maximum Operating Temperature 5 0x060 4 0 Time in Under-Temperature 5 0x068 1 0 Specified Minimum Operating Temperature 6 ===== = = == Transport Statistics (rev 1) == 6 0x008 4 39008 Number of Hardware Resets 6 0x010 4 36847 Number of ASR Events 6 0x018 4 1 Number of Interface CRC Errors |_ ~ normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0009 2 18 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 18 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdb === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K1000.B Device Model: Hitachi HDT721010SLA360 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: ST6OA31B User Capacity: 1 000 204 886 016 bytes [1,00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sat Jul 25 18:14:05 2015 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (14090) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 235) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 129 129 054 - 126 3 Spin_Up_Time POS--- 130 130 024 - 430 (Average 452) 4 Start_Stop_Count -O--C- 099 099 000 - 6306 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 20 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 125 125 020 - 33 9 Power_On_Hours -O--C- 094 094 000 - 44910 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 4523 192 Power-Off_Retract_Count -O--CK 095 095 000 - 6461 193 Load_Cycle_Count -O--C- 095 095 000 - 6461 194 Temperature_Celsius -O---- 139 139 000 - 43 (Min/Max 16/56) 196 Reallocated_Event_Count -O--CK 100 100 000 - 21 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 183142 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 781 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 781 [0] occurred at disk power-on lifetime: 44893 hours (1870 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 00 01 00 00 Error: ICRC, ABRT at LBA = 0x00000001 = 1 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 20 00 00 1f 8e b0 e1 4f ff 08:05:33.700 WRITE FPDMA QUEUED 61 00 08 00 38 00 00 00 02 53 e0 40 00 08:05:33.700 WRITE FPDMA QUEUED 61 01 00 00 30 00 00 1f 8e b3 00 40 00 08:05:33.700 WRITE FPDMA QUEUED 61 01 00 00 28 00 00 1f 8e b2 00 40 00 08:05:33.700 WRITE FPDMA QUEUED 61 01 00 00 20 00 00 1f 8e b1 00 40 00 08:05:33.700 WRITE FPDMA QUEUED Error 780 [3] occurred at disk power-on lifetime: 44893 hours (1870 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 00 01 00 00 Error: ICRC, ABRT at LBA = 0x00000001 = 1 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 01 00 00 50 00 00 14 bb 89 c9 44 ff 08:05:03.600 WRITE FPDMA QUEUED 61 01 00 00 f8 00 00 14 bb 8a 18 40 00 08:05:03.600 WRITE FPDMA QUEUED 61 01 00 00 f0 00 00 14 bb 89 18 40 00 08:05:03.600 WRITE FPDMA QUEUED 61 01 00 00 e8 00 00 14 bb 88 18 40 00 08:05:03.600 WRITE FPDMA QUEUED 61 01 00 00 e0 00 00 14 bb 87 18 40 00 08:05:03.600 WRITE FPDMA QUEUED Error 779 [2] occurred at disk power-on lifetime: 44893 hours (1870 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 00 01 00 00 Error: ICRC, ABRT at LBA = 0x00000001 = 1 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 01 00 00 90 00 00 2e 55 71 69 4e ff 08:04:54.100 WRITE FPDMA QUEUED 61 01 00 00 30 00 00 2e 55 70 f8 40 00 08:04:54.100 WRITE FPDMA QUEUED 61 01 00 00 28 00 00 2e 55 6f f8 40 00 08:04:54.100 WRITE FPDMA QUEUED 61 01 00 00 20 00 00 2e 55 6e f8 40 00 08:04:54.100 WRITE FPDMA QUEUED 61 01 00 00 18 00 00 2e 55 6d f8 40 00 08:04:54.100 WRITE FPDMA QUEUED Error 778 [1] occurred at disk power-on lifetime: 44893 hours (1870 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 f0 00 00 2e bd 50 11 4e 00 Error: ICRC, ABRT at LBA = 0x2ebd5011 = 784158737 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 01 00 00 88 00 00 2e bd 51 00 40 00 08:04:51.400 WRITE FPDMA QUEUED 61 01 00 00 80 00 00 2e bd 50 00 40 00 08:04:51.400 WRITE FPDMA QUEUED 61 01 00 00 78 00 00 2e bd 4f 00 40 00 08:04:51.400 WRITE FPDMA QUEUED 61 01 00 00 70 00 00 2e bd 4e 00 40 00 08:04:51.400 WRITE FPDMA QUEUED 61 01 00 00 68 00 00 2e bd 4d 00 40 00 08:04:51.400 WRITE FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 41010 - # 2 Short offline Completed without error 00% 40968 - # 3 Short offline Completed without error 00% 40838 - # 4 Short offline Completed without error 00% 40658 - # 5 Short offline Completed without error 00% 40410 - # 6 Short offline Completed without error 00% 40409 - # 7 Short offline Completed without error 00% 40383 - # 8 Short offline Completed without error 00% 40376 - # 9 Short offline Completed without error 00% 40281 - #10 Short offline Completed without error 00% 40242 - #11 Short offline Completed without error 00% 40208 - #12 Short offline Completed without error 00% 40204 - #13 Short offline Completed without error 00% 40191 - #14 Short offline Completed without error 00% 40132 - #15 Short offline Completed without error 00% 40118 - #16 Short offline Completed without error 00% 40106 - #17 Short offline Completed without error 00% 40095 - #18 Short offline Completed without error 00% 40085 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 43 Celsius Power Cycle Min/Max Temperature: 31/44 Celsius Lifetime Min/Max Temperature: 16/56 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (66) Index Estimated Time Temperature Celsius 67 2015-07-25 16:07 43 ************************ 68 2015-07-25 16:08 43 ************************ 69 2015-07-25 16:09 42 *********************** 70 2015-07-25 16:10 42 *********************** 71 2015-07-25 16:11 43 ************************ 72 2015-07-25 16:12 42 *********************** ... ..( 2 skipped). .. *********************** 75 2015-07-25 16:15 42 *********************** 76 2015-07-25 16:16 43 ************************ ... ..( 6 skipped). .. ************************ 83 2015-07-25 16:23 43 ************************ 84 2015-07-25 16:24 42 *********************** 85 2015-07-25 16:25 43 ************************ 86 2015-07-25 16:26 43 ************************ 87 2015-07-25 16:27 42 *********************** ... ..( 7 skipped). .. *********************** 95 2015-07-25 16:35 42 *********************** 96 2015-07-25 16:36 43 ************************ ... ..( 4 skipped). .. ************************ 101 2015-07-25 16:41 43 ************************ 102 2015-07-25 16:42 42 *********************** 103 2015-07-25 16:43 42 *********************** 104 2015-07-25 16:44 43 ************************ 105 2015-07-25 16:45 42 *********************** ... ..( 9 skipped). .. *********************** 115 2015-07-25 16:55 42 *********************** 116 2015-07-25 16:56 43 ************************ ... ..( 40 skipped). .. ************************ 29 2015-07-25 17:37 43 ************************ 30 2015-07-25 17:38 44 ************************* ... ..( 3 skipped). .. ************************* 34 2015-07-25 17:42 44 ************************* 35 2015-07-25 17:43 43 ************************ 36 2015-07-25 17:44 44 ************************* 37 2015-07-25 17:45 44 ************************* 38 2015-07-25 17:46 43 ************************ ... ..( 7 skipped). .. ************************ 46 2015-07-25 17:54 43 ************************ 47 2015-07-25 17:55 44 ************************* ... ..( 7 skipped). .. ************************* 55 2015-07-25 18:03 44 ************************* 56 2015-07-25 18:04 43 ************************ ... ..( 9 skipped). .. ************************ 66 2015-07-25 18:14 43 ************************ SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0009 2 17 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 17 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS