/dev/sda === START OF INFORMATION SECTION === Device Model: Samsung SSD 850 PRO 128GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EXM02B6Q User Capacity: 128 035 676 160 bytes [128 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Apr 15 21:28:12 2016 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Unexpected SCT status 0x0001 (action_code=4, function_code=2) Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 68) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 099 099 000 - 1046 12 Power_Cycle_Count -O--CK 099 099 000 - 284 177 Wear_Leveling_Count PO--C- 099 099 000 - 9 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 072 065 000 - 28 195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 235 Unknown_Attribute -O--C- 099 099 000 - 91 241 Total_LBAs_Written -O--CK 099 099 000 - 1678342231 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 16 Device vendor specific log 0xa5 GPL,SL VS 16 Device vendor specific log 0xce GPL,SL VS 16 Device vendor specific log 0xde SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) SCT Support Level: 1 Device State: Active (0) Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: ?/ ? Celsius Lifetime Min/Max Temperature: ?/ ? Celsius Under/Over Temperature Limit Count: 0/6185 SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: ?/ ? Celsius Min/Max Temperature Limit: ?/ ? Celsius Temperature History Size (Index): 128 (9) Index Estimated Time Temperature Celsius 10 2016-04-15 00:10 ? - ... ..(117 skipped). .. - 0 2016-04-15 19:50 ? - 1 2016-04-15 20:00 27 ******** ... ..( 5 skipped). .. ******** 7 2016-04-15 21:00 27 ******** 8 2016-04-15 21:10 28 ********* 9 2016-04-15 21:20 28 ********* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 22 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 22 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green Device Model: WDC WD10EADS-00P8B0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.00A01 User Capacity: 1 000 203 804 160 bytes [1,00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Fri Apr 15 21:28:13 2016 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x85) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (23760) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 273) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 307 3 Spin_Up_Time POS--K 191 173 021 - 5450 4 Start_Stop_Count -O--CK 096 096 000 - 4458 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 078 078 000 - 16222 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 097 097 000 - 3756 192 Power-Off_Retract_Count -O--CK 199 199 000 - 770 193 Load_Cycle_Count -O--CK 127 127 000 - 221531 194 Temperature_Celsius -O---K 121 100 000 - 29 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 1 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 3 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 307 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 307 [18] occurred at disk power-on lifetime: 16205 hours (675 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 03 2d 45 58 40 00 Error: UNC at LBA = 0x032d4558 = 53298520 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 04 00 48 00 00 03 ac f9 f8 40 00 00:07:28.423 READ FPDMA QUEUED 61 00 08 00 40 00 00 00 60 08 68 40 00 00:07:28.416 WRITE FPDMA QUEUED 61 00 08 00 38 00 00 00 63 60 30 40 00 00:07:28.416 WRITE FPDMA QUEUED 61 00 10 00 e8 00 00 00 63 58 78 40 00 00:07:28.416 WRITE FPDMA QUEUED 61 00 08 00 e0 00 00 00 63 51 c8 40 00 00:07:28.416 WRITE FPDMA QUEUED Error 306 [17] occurred at disk power-on lifetime: 16205 hours (675 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 03 2d 45 58 40 00 Error: UNC at LBA = 0x032d4558 = 53298520 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 40 00 88 00 00 03 d0 ab 40 40 00 00:07:25.612 READ FPDMA QUEUED 60 00 40 00 80 00 00 03 cf dd 6a 40 00 00:07:25.587 READ FPDMA QUEUED 60 00 38 00 78 00 00 03 cf 90 a8 40 00 00:07:25.578 READ FPDMA QUEUED 60 00 38 00 70 00 00 03 cf e0 6a 40 00 00:07:25.577 READ FPDMA QUEUED 60 00 34 00 68 00 00 00 dd ba 30 40 00 00:07:25.570 READ FPDMA QUEUED Error 305 [16] occurred at disk power-on lifetime: 16205 hours (675 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 03 2d 45 58 40 00 Error: UNC at LBA = 0x032d4558 = 53298520 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 70 00 00 03 3a 10 f0 40 00 00:07:22.694 READ FPDMA QUEUED 60 00 08 00 68 00 00 03 2d 45 58 40 00 00:07:22.693 READ FPDMA QUEUED 60 00 08 00 60 00 00 03 ab 35 b8 40 00 00:07:22.693 READ FPDMA QUEUED 60 00 08 00 58 00 00 03 ab 35 a8 40 00 00:07:22.693 READ FPDMA QUEUED 60 00 10 00 50 00 00 03 ab 35 88 40 00 00:07:22.693 READ FPDMA QUEUED Error 304 [15] occurred at disk power-on lifetime: 16205 hours (675 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 03 2d 45 58 40 00 Error: UNC at LBA = 0x032d4558 = 53298520 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 40 00 b8 00 00 03 cd 46 c8 40 00 00:07:19.840 READ FPDMA QUEUED 60 00 08 00 b0 00 00 00 61 15 20 40 00 00:07:19.838 READ FPDMA QUEUED 60 00 20 00 a8 00 00 03 cd 4a a0 40 00 00:07:19.838 READ FPDMA QUEUED 60 00 40 00 a0 00 00 03 89 28 38 40 00 00:07:19.832 READ FPDMA QUEUED 60 00 38 00 88 00 00 03 89 25 68 40 00 00:07:19.832 READ FPDMA QUEUED Error 303 [14] occurred at disk power-on lifetime: 16205 hours (675 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 03 2d 45 58 40 00 Error: WP at LBA = 0x032d4558 = 53298520 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 d8 00 00 00 5b f9 e0 40 00 00:07:16.800 WRITE FPDMA QUEUED 61 00 08 00 d0 00 00 00 5c 44 50 40 00 00:07:16.800 WRITE FPDMA QUEUED 61 00 08 00 c8 00 00 00 5b f9 d0 40 00 00:07:16.799 WRITE FPDMA QUEUED 61 00 08 00 c0 00 00 00 5b f9 e8 40 00 00:07:16.798 WRITE FPDMA QUEUED 61 00 79 00 b8 00 00 00 0e 0f b8 40 00 00:07:16.798 WRITE FPDMA QUEUED Error 302 [13] occurred at disk power-on lifetime: 16205 hours (675 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 03 2d 45 58 40 00 Error: WP at LBA = 0x032d4558 = 53298520 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 10 00 00 00 5b f9 e0 40 00 00:07:13.718 WRITE FPDMA QUEUED 61 00 10 00 00 00 00 01 9e cd d0 40 00 00:07:13.718 WRITE FPDMA QUEUED 61 00 20 00 f8 00 00 03 9a 9a 40 40 00 00:07:13.717 WRITE FPDMA QUEUED 61 00 20 00 e8 00 00 03 9d 6d 60 40 00 00:07:13.716 WRITE FPDMA QUEUED 61 00 c8 00 e0 00 00 03 39 c4 f8 40 00 00:07:13.686 WRITE FPDMA QUEUED Error 301 [12] occurred at disk power-on lifetime: 16205 hours (675 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 03 2d 45 58 40 00 Error: WP at LBA = 0x032d4558 = 53298520 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 88 00 e8 00 00 03 39 c4 78 40 00 00:07:10.857 WRITE FPDMA QUEUED 61 00 20 00 e0 00 00 03 9a 9a 40 40 00 00:07:10.856 WRITE FPDMA QUEUED 61 00 80 00 d8 00 00 03 9d 6b e0 40 00 00:07:10.856 WRITE FPDMA QUEUED 60 00 08 00 d0 00 00 03 3a 10 f0 40 00 00:07:10.848 READ FPDMA QUEUED 60 00 08 00 c8 00 00 03 2d 45 58 40 00 00:07:10.848 READ FPDMA QUEUED Error 300 [11] occurred at disk power-on lifetime: 16205 hours (675 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 03 2d 45 58 40 00 Error: WP at LBA = 0x032d4558 = 53298520 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 7c 00 c0 00 00 03 39 c4 00 40 00 00:07:07.931 WRITE FPDMA QUEUED 61 00 20 00 b8 00 00 03 9a 9a 40 40 00 00:07:07.931 WRITE FPDMA QUEUED 61 00 80 00 b0 00 00 03 9d 69 e0 40 00 00:07:07.930 WRITE FPDMA QUEUED 60 00 80 00 a8 00 00 03 39 c4 00 40 00 00:07:07.917 READ FPDMA QUEUED 60 00 60 00 a0 00 00 03 38 9c 20 40 00 00:07:07.917 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 29 Celsius Power Cycle Min/Max Temperature: 28/29 Celsius Lifetime Min/Max Temperature: 28/50 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (191) Index Estimated Time Temperature Celsius 192 2016-04-15 13:31 30 *********** ... ..( 11 skipped). .. *********** 204 2016-04-15 13:43 30 *********** 205 2016-04-15 13:44 29 ********** 206 2016-04-15 13:45 ? - 207 2016-04-15 13:46 30 *********** 208 2016-04-15 13:47 29 ********** 209 2016-04-15 13:48 30 *********** ... ..( 7 skipped). .. *********** 217 2016-04-15 13:56 30 *********** 218 2016-04-15 13:57 ? - 219 2016-04-15 13:58 30 *********** 220 2016-04-15 13:59 ? - 221 2016-04-15 14:00 30 *********** 222 2016-04-15 14:01 29 ********** 223 2016-04-15 14:02 ? - 224 2016-04-15 14:03 30 *********** 225 2016-04-15 14:04 ? - 226 2016-04-15 14:05 28 ********* ... ..( 4 skipped). .. ********* 231 2016-04-15 14:10 28 ********* 232 2016-04-15 14:11 29 ********** ... ..( 16 skipped). .. ********** 249 2016-04-15 14:28 29 ********** 250 2016-04-15 14:29 30 *********** ... ..( 10 skipped). .. *********** 261 2016-04-15 14:40 30 *********** 262 2016-04-15 14:41 29 ********** ... ..( 3 skipped). .. ********** 266 2016-04-15 14:45 29 ********** 267 2016-04-15 14:46 28 ********* ... ..( 48 skipped). .. ********* 316 2016-04-15 15:35 28 ********* 317 2016-04-15 15:36 ? - 318 2016-04-15 15:37 28 ********* 319 2016-04-15 15:38 29 ********** ... ..( 7 skipped). .. ********** 327 2016-04-15 15:46 29 ********** 328 2016-04-15 15:47 28 ********* ... ..( 12 skipped). .. ********* 341 2016-04-15 16:00 28 ********* 342 2016-04-15 16:01 ? - 343 2016-04-15 16:02 28 ********* 344 2016-04-15 16:03 29 ********** ... ..( 2 skipped). .. ********** 347 2016-04-15 16:06 29 ********** 348 2016-04-15 16:07 ? - 349 2016-04-15 16:08 29 ********** ... ..( 9 skipped). .. ********** 359 2016-04-15 16:18 29 ********** 360 2016-04-15 16:19 28 ********* ... ..( 10 skipped). .. ********* 371 2016-04-15 16:30 28 ********* 372 2016-04-15 16:31 ? - 373 2016-04-15 16:32 28 ********* 374 2016-04-15 16:33 28 ********* 375 2016-04-15 16:34 28 ********* 376 2016-04-15 16:35 29 ********** ... ..( 5 skipped). .. ********** 382 2016-04-15 16:41 29 ********** 383 2016-04-15 16:42 28 ********* 384 2016-04-15 16:43 29 ********** ... ..( 3 skipped). .. ********** 388 2016-04-15 16:47 29 ********** 389 2016-04-15 16:48 28 ********* 390 2016-04-15 16:49 29 ********** 391 2016-04-15 16:50 29 ********** 392 2016-04-15 16:51 28 ********* 393 2016-04-15 16:52 29 ********** ... ..( 3 skipped). .. ********** 397 2016-04-15 16:56 29 ********** 398 2016-04-15 16:57 28 ********* ... ..( 4 skipped). .. ********* 403 2016-04-15 17:02 28 ********* 404 2016-04-15 17:03 29 ********** ... ..( 2 skipped). .. ********** 407 2016-04-15 17:06 29 ********** 408 2016-04-15 17:07 28 ********* ... ..( 36 skipped). .. ********* 445 2016-04-15 17:44 28 ********* 446 2016-04-15 17:45 29 ********** ... ..( 25 skipped). .. ********** 472 2016-04-15 18:11 29 ********** 473 2016-04-15 18:12 ? - 474 2016-04-15 18:13 29 ********** 475 2016-04-15 18:14 ? - 476 2016-04-15 18:15 30 *********** 477 2016-04-15 18:16 30 *********** 0 2016-04-15 18:17 30 *********** 1 2016-04-15 18:18 29 ********** 2 2016-04-15 18:19 30 *********** ... ..( 5 skipped). .. *********** 8 2016-04-15 18:25 30 *********** 9 2016-04-15 18:26 ? - 10 2016-04-15 18:27 30 *********** 11 2016-04-15 18:28 29 ********** 12 2016-04-15 18:29 30 *********** ... ..( 10 skipped). .. *********** 23 2016-04-15 18:40 30 *********** 24 2016-04-15 18:41 29 ********** ... ..( 5 skipped). .. ********** 30 2016-04-15 18:47 29 ********** 31 2016-04-15 18:48 30 *********** 32 2016-04-15 18:49 30 *********** 33 2016-04-15 18:50 29 ********** ... ..( 3 skipped). .. ********** 37 2016-04-15 18:54 29 ********** 38 2016-04-15 18:55 30 *********** ... ..( 20 skipped). .. *********** 59 2016-04-15 19:16 30 *********** 60 2016-04-15 19:17 29 ********** 61 2016-04-15 19:18 30 *********** ... ..( 8 skipped). .. *********** 70 2016-04-15 19:27 30 *********** 71 2016-04-15 19:28 29 ********** ... ..( 6 skipped). .. ********** 78 2016-04-15 19:35 29 ********** 79 2016-04-15 19:36 30 *********** ... ..( 6 skipped). .. *********** 86 2016-04-15 19:43 30 *********** 87 2016-04-15 19:44 29 ********** ... ..( 13 skipped). .. ********** 101 2016-04-15 19:58 29 ********** 102 2016-04-15 19:59 ? - 103 2016-04-15 20:00 29 ********** 104 2016-04-15 20:01 ? - 105 2016-04-15 20:02 24 ***** 106 2016-04-15 20:03 25 ****** 107 2016-04-15 20:04 25 ****** 108 2016-04-15 20:05 26 ******* ... ..( 5 skipped). .. ******* 114 2016-04-15 20:11 26 ******* 115 2016-04-15 20:12 27 ******** ... ..( 9 skipped). .. ******** 125 2016-04-15 20:22 27 ******** 126 2016-04-15 20:23 28 ********* ... ..( 8 skipped). .. ********* 135 2016-04-15 20:32 28 ********* 136 2016-04-15 20:33 29 ********** 137 2016-04-15 20:34 30 *********** 138 2016-04-15 20:35 ? - 139 2016-04-15 20:36 30 *********** ... ..( 28 skipped). .. *********** 168 2016-04-15 21:05 30 *********** 169 2016-04-15 21:06 31 ************ 170 2016-04-15 21:07 31 ************ 171 2016-04-15 21:08 31 ************ 172 2016-04-15 21:09 ? - 173 2016-04-15 21:10 32 ************* ... ..( 3 skipped). .. ************* 177 2016-04-15 21:14 32 ************* 178 2016-04-15 21:15 33 ************** 179 2016-04-15 21:16 32 ************* ... ..( 2 skipped). .. ************* 182 2016-04-15 21:19 32 ************* 183 2016-04-15 21:20 31 ************ ... ..( 5 skipped). .. ************ 189 2016-04-15 21:26 31 ************ 190 2016-04-15 21:27 30 *********** 191 2016-04-15 21:28 30 *********** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 8 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 5796 Vendor specific /dev/sdc === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.11 Device Model: ST3160813AS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: CC2J User Capacity: 160 041 885 696 bytes [160 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Fri Apr 15 21:28:13 2016 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 208 (intermediate), recommended: 208 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 609) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 34) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 117 099 006 - 158927693 3 Spin_Up_Time PO---- 100 097 000 - 0 4 Start_Stop_Count -O--CK 098 098 020 - 2294 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 1 7 Seek_Error_Rate POSR-- 083 060 030 - 221349965 9 Power_On_Hours -O--CK 088 088 000 - 10745 10 Spin_Retry_Count PO--C- 100 100 097 - 1 12 Power_Cycle_Count -O--CK 098 098 020 - 2626 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 097 097 000 - 3 188 Command_Timeout -O--CK 100 097 000 - 12885098778 189 High_Fly_Writes -O-RCK 001 001 000 - 1940 190 Airflow_Temperature_Cel -O---K 068 052 045 - 32 (Min/Max 31/32) 194 Temperature_Celsius -O---K 032 048 000 - 32 (0 10 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 047 038 000 - 158927693 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 10325 (113 82 0) 241 Total_LBAs_Written ------ 100 253 000 - 2295826581 242 Total_LBAs_Read ------ 100 253 000 - 932146913 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 2928 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 3 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 3 [2] occurred at disk power-on lifetime: 3574 hours (148 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 01 75 00 0a 6d 00 00 Error: UNC at LBA = 0x175000a6d = 6257904237 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 01 75 00 0a 68 e0 00 00:10:34.826 READ DMA EXT 25 00 00 00 08 00 01 75 00 0a 60 e0 00 00:10:34.826 READ DMA EXT 25 00 00 00 08 00 01 75 00 0a 58 e0 00 00:10:34.826 READ DMA EXT 25 00 00 00 08 00 01 75 00 0a 50 e0 00 00:10:34.825 READ DMA EXT 25 00 00 00 08 00 01 75 00 0a 48 e0 00 00:10:34.825 READ DMA EXT Error 2 [1] occurred at disk power-on lifetime: 3574 hours (148 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 01 75 00 0a 6d 00 00 Error: UNC at LBA = 0x175000a6d = 6257904237 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 60 00 01 75 00 0a 40 e0 00 00:10:31.931 READ DMA EXT 35 00 00 00 50 00 01 76 00 09 90 e0 00 00:10:31.930 WRITE DMA EXT 35 00 00 00 08 00 00 a3 00 5c e8 e0 00 00:10:29.938 WRITE DMA EXT 35 00 00 00 08 00 01 20 00 2d a0 e0 00 00:10:29.938 WRITE DMA EXT 35 00 00 00 08 00 00 96 00 5c 30 e0 00 00:10:29.937 WRITE DMA EXT Error 1 [0] occurred at disk power-on lifetime: 3411 hours (142 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 01 75 00 0a 6d 00 00 Error: UNC at LBA = 0x175000a6d = 6257904237 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 90 00 01 75 00 0a 50 e0 00 02:02:14.133 READ DMA EXT 35 00 00 00 70 00 01 09 00 8a e8 e0 00 02:02:14.131 WRITE DMA EXT 25 00 00 00 70 00 01 f7 00 07 60 e0 00 02:02:14.127 READ DMA EXT 35 00 00 00 90 00 01 09 00 8a 58 e0 00 02:02:14.126 WRITE DMA EXT 25 00 00 00 90 00 01 69 00 08 e0 e0 00 02:02:14.105 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Conveyance offline Completed without error 00% 10544 - # 2 Extended offline Completed without error 00% 8156 - # 3 Conveyance offline Completed without error 00% 7462 - # 4 Conveyance offline Completed without error 00% 7462 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 31/32 Celsius Lifetime Min/Max Temperature: 10/48 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (125) Index Estimated Time Temperature Celsius 126 2016-04-15 19:21 31 ************ ... ..( 28 skipped). .. ************ 27 2016-04-15 19:50 31 ************ 28 2016-04-15 19:51 ? - 29 2016-04-15 19:52 31 ************ ... ..( 21 skipped). .. ************ 51 2016-04-15 20:14 31 ************ 52 2016-04-15 20:15 32 ************* 53 2016-04-15 20:16 32 ************* 54 2016-04-15 20:17 31 ************ ... ..( 68 skipped). .. ************ 123 2016-04-15 21:26 31 ************ 124 2016-04-15 21:27 32 ************* 125 2016-04-15 21:28 32 ************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 16 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdd === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.10 Device Model: ST3250620AS Serial Number: -- Firmware Version: 3.AAC User Capacity: 250 056 171 008 bytes [250 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Fri Apr 15 21:28:14 2016 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 92) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 112 082 006 - 172317142 3 Spin_Up_Time PO---- 093 089 000 - 0 4 Start_Stop_Count -O--CK 094 094 020 - 6305 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 074 060 030 - 129680704606 9 Power_On_Hours -O--CK 074 074 000 - 22901 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 095 095 020 - 5814 187 Reported_Uncorrect -O--CK 100 100 000 - 0 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 063 042 045 Past 37 (Min/Max 36/37) 194 Temperature_Celsius -O---K 037 058 000 - 37 (0 12 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 067 055 000 - 46169203 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL,SL VS 101 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer 0xff GPL - 23040 Reserved SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 711 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 711 [10] occurred at disk power-on lifetime: 5434 hours (226 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ed 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 00 01 01 00 1d 41 00 1c 2e ed 00 00:04:28.567 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 00 00 1d 41 00 1c 2e e0 00 00:04:28.508 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 00 00 00 1d 41 00 1c 2e ed 00 00:04:28.292 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 01 01 00 1d 41 00 1c 2e e0 00 00:04:28.222 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 01 01 00 1d 41 00 1c 2e ed 00 00:04:26.139 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 710 [9] occurred at disk power-on lifetime: 5434 hours (226 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ed 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 00 01 01 00 1d 41 00 1c 2e ed 00 00:04:22.494 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 00 00 1d 41 00 1c 2e e0 00 00:04:22.494 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 00 00 00 1d 41 00 1c 2e ed 00 00:04:22.494 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 01 00 1d 59 00 1c 6f e0 00 00:04:22.493 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 29 00 00 00 01 00 1d 59 00 1c 6f e0 00 00:04:26.139 READ MULTIPLE EXT Error 709 [8] occurred at disk power-on lifetime: 5433 hours (226 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ed 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 00 01 01 00 1d 41 00 1c 2e ed 00 01:34:46.354 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 00 00 1d 41 00 1c 2e e0 00 01:34:46.354 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 00 00 00 1d 41 00 1c 2e ed 00 01:34:46.311 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 01 01 00 1d 41 00 1c 2e e0 00 01:34:52.379 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 01 01 00 1d 41 00 1c 2e ed 00 01:34:52.319 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 708 [7] occurred at disk power-on lifetime: 5433 hours (226 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ed 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 00 01 01 00 1d 41 00 1c 2e ed 00 01:34:46.354 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 00 00 1d 41 00 1c 2e e0 00 01:34:46.354 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 00 00 00 1d 41 00 1c 2e ed 00 01:34:46.311 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 01 00 1d 59 00 1c 6f e0 00 01:34:46.311 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 29 00 00 00 01 00 1d 59 00 1c 6f e0 00 01:34:46.311 READ MULTIPLE EXT Error 707 [6] occurred at disk power-on lifetime: 5433 hours (226 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ed 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 00 01 01 00 1d 41 00 1c 2e ed 00 01:32:30.651 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 00 00 1d 41 00 1c 2e e0 00 01:32:30.535 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 00 00 00 1d 41 00 1c 2e ed 00 01:32:30.466 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 01 01 00 1d 41 00 1c 2e e0 00 01:32:27.563 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 01 01 00 1d 41 00 1c 2e ed 00 01:32:27.523 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 706 [5] occurred at disk power-on lifetime: 5433 hours (226 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ed 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 00 01 01 00 1d 41 00 1c 2e ed 00 01:32:30.651 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 00 00 1d 41 00 1c 2e e0 00 01:32:30.535 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 00 00 00 1d 41 00 1c 2e ed 00 01:32:30.466 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 01 00 1d 59 00 1c 6f e0 00 01:32:27.563 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 29 00 00 00 01 00 1d 59 00 1c 6f e0 00 01:32:27.523 READ MULTIPLE EXT Error 705 [4] occurred at disk power-on lifetime: 5433 hours (226 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ed 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 00 01 01 00 1d 41 00 1c 2e ed 00 01:32:05.094 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 00 00 1d 41 00 1c 2e e0 00 01:32:04.938 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 00 00 00 1d 41 00 1c 2e ed 00 01:32:04.821 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 01 01 00 1d 41 00 1c 2e e0 00 01:32:04.752 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 01 01 00 1d 41 00 1c 2e ed 00 01:32:01.866 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 704 [3] occurred at disk power-on lifetime: 5433 hours (226 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ed 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 00 01 01 00 1d 41 00 1c 2e ed 00 01:32:05.094 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 00 00 1d 41 00 1c 2e e0 00 01:32:04.938 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 00 00 00 1d 41 00 1c 2e ed 00 01:32:04.821 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 01 00 1d 59 00 1c 6f e0 00 01:32:04.752 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 29 00 00 00 01 00 1d 59 00 1c 6f e0 00 01:32:01.866 READ MULTIPLE EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 20608 - # 2 Short offline Completed without error 00% 17273 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 16 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sde === START OF INFORMATION SECTION === Device Model: Samsung SSD 850 EVO 120GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EMT02B6Q User Capacity: 120 034 123 776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Apr 15 21:28:14 2016 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 64) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 099 099 000 - 800 12 Power_Cycle_Count -O--CK 099 099 000 - 337 177 Wear_Leveling_Count PO--C- 099 099 000 - 6 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 072 055 000 - 28 195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 235 Unknown_Attribute -O--C- 099 099 000 - 80 241 Total_LBAs_Written -O--CK 099 099 000 - 1374225980 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 0 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 1 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: SCT command executing in background (5) Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: 27/28 Celsius Lifetime Min/Max Temperature: 0/70 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (9) Index Estimated Time Temperature Celsius 10 2016-04-15 00:10 ? - ... ..(116 skipped). .. - 127 2016-04-15 19:40 ? - 0 2016-04-15 19:50 27 ******** 1 2016-04-15 20:00 28 ********* ... ..( 7 skipped). .. ********* 9 2016-04-15 21:20 28 ********* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 22 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 21 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC