/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.7.8-200.fc32.x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba 2.5" HDD MQ01ABD... Device Model: TOSHIBA MQ01ABD100 Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: AX0R2J User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Jul 24 13:02:16 2020 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 244) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 098 050 - 0 2 Throughput_Performance P-S--- 100 100 050 - 0 3 Spin_Up_Time POS--K 100 100 001 - 1711 4 Start_Stop_Count -O--CK 100 100 000 - 6613 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 16 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 8 Seek_Time_Performance P-S--- 100 100 050 - 0 9 Power_On_Hours -O--CK 044 044 000 - 22515 10 Spin_Retry_Count PO--CK 231 100 030 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 5256 191 G-Sense_Error_Rate -O--CK 100 100 000 - 448 192 Power-Off_Retract_Count -O--CK 100 100 000 - 219 193 Load_Cycle_Count -O--CK 096 096 000 - 43581 194 Temperature_Celsius -O---K 100 100 000 - 25 (Min/Max 7/48) 196 Reallocated_Event_Count -O--CK 100 100 000 - 2 197 Current_Pending_Sector -O--CK 100 100 000 - 4304 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 220 Disk_Shift -O---- 100 100 000 - 0 222 Loaded_Hours -O--CK 058 058 000 - 17076 223 Load_Retry_Count -O--CK 100 100 000 - 0 224 Load_Friction -O---K 100 100 000 - 0 226 Load-in_Time -OS--K 100 100 000 - 272 240 Head_Flying_Hours P----- 100 100 001 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) Device Error Count: 40131 (device log contains only the most recent 256 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 40131 [194] occurred at disk power-on lifetime: 22495 hours (937 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 60 00 00 50 3e c0 78 40 00 Error: UNC at LBA = 0x503ec078 = 1346289784 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 30 00 78 00 00 50 3e c1 28 40 00 3d+04:47:37.095 READ FPDMA QUEUED 60 00 90 00 70 00 00 50 3e c0 98 40 00 3d+04:47:37.095 READ FPDMA QUEUED 60 00 08 00 68 00 00 50 3e c0 90 40 00 3d+04:47:37.095 READ FPDMA QUEUED 60 00 30 00 60 00 00 50 3e c0 60 40 00 3d+04:47:37.095 READ FPDMA QUEUED 60 00 08 00 58 00 00 50 3e c0 58 40 00 3d+04:47:37.095 READ FPDMA QUEUED Error 40130 [193] occurred at disk power-on lifetime: 22359 hours (931 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 48 00 00 00 05 ea 96 40 00 Error: UNC at LBA = 0x0005ea96 = 387734 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 48 00 00 00 05 ea 96 40 00 00:00:18.460 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:00:18.459 READ LOG EXT 60 00 01 00 40 00 00 00 05 ea 96 40 00 00:00:18.358 READ FPDMA QUEUED 60 00 02 00 38 00 00 00 05 ea 1a 40 00 00:00:18.358 READ FPDMA QUEUED 60 00 02 00 30 00 00 00 05 ea 18 40 00 00:00:18.357 READ FPDMA QUEUED Error 40129 [192] occurred at disk power-on lifetime: 22359 hours (931 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 40 00 00 00 05 ea 96 40 00 Error: UNC at LBA = 0x0005ea96 = 387734 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 40 00 00 00 05 ea 96 40 00 00:00:18.358 READ FPDMA QUEUED 60 00 02 00 38 00 00 00 05 ea 1a 40 00 00:00:18.358 READ FPDMA QUEUED 60 00 02 00 30 00 00 00 05 ea 18 40 00 00:00:18.357 READ FPDMA QUEUED 61 00 08 00 28 00 00 00 0c 3d c0 40 00 00:00:18.357 WRITE FPDMA QUEUED 60 00 3d 00 20 00 00 00 05 ea 59 40 00 00:00:18.348 READ FPDMA QUEUED Error 40128 [191] occurred at disk power-on lifetime: 22243 hours (926 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 48 00 00 00 05 ea 96 40 00 Error: UNC at LBA = 0x0005ea96 = 387734 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 48 00 00 00 05 ea 96 40 00 00:18:26.986 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:18:26.985 READ LOG EXT 60 00 01 00 40 00 00 00 05 ea 96 40 00 00:18:26.884 READ FPDMA QUEUED 60 00 02 00 38 00 00 00 05 ea 1a 40 00 00:18:26.884 READ FPDMA QUEUED 60 00 02 00 30 00 00 00 05 ea 18 40 00 00:18:26.884 READ FPDMA QUEUED Error 40127 [190] occurred at disk power-on lifetime: 22243 hours (926 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 40 00 00 00 05 ea 96 40 00 Error: UNC at LBA = 0x0005ea96 = 387734 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 40 00 00 00 05 ea 96 40 00 00:18:26.884 READ FPDMA QUEUED 60 00 02 00 38 00 00 00 05 ea 1a 40 00 00:18:26.884 READ FPDMA QUEUED 60 00 02 00 30 00 00 00 05 ea 18 40 00 00:18:26.884 READ FPDMA QUEUED 61 00 08 00 28 00 00 00 0c 3d c0 40 00 00:18:26.883 WRITE FPDMA QUEUED 60 00 3d 00 20 00 00 00 05 ea 59 40 00 00:18:26.874 READ FPDMA QUEUED Error 40126 [189] occurred at disk power-on lifetime: 22209 hours (925 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 48 00 00 00 05 ea 96 40 00 Error: UNC at LBA = 0x0005ea96 = 387734 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 48 00 00 00 05 ea 96 40 00 10d+04:42:42.864 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 e0 00 10d+04:42:42.863 READ LOG EXT 60 00 01 00 40 00 00 00 05 ea 96 40 00 10d+04:42:42.762 READ FPDMA QUEUED 60 00 02 00 38 00 00 00 05 ea 1a 40 00 10d+04:42:42.761 READ FPDMA QUEUED 60 00 02 00 30 00 00 00 05 ea 18 40 00 10d+04:42:42.761 READ FPDMA QUEUED Error 40125 [188] occurred at disk power-on lifetime: 22209 hours (925 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 40 00 00 00 05 ea 96 40 00 Error: UNC at LBA = 0x0005ea96 = 387734 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 40 00 00 00 05 ea 96 40 00 10d+04:42:42.762 READ FPDMA QUEUED 60 00 02 00 38 00 00 00 05 ea 1a 40 00 10d+04:42:42.761 READ FPDMA QUEUED 60 00 02 00 30 00 00 00 05 ea 18 40 00 10d+04:42:42.761 READ FPDMA QUEUED 61 00 08 00 28 00 00 00 0c 3d c0 40 00 10d+04:42:42.761 WRITE FPDMA QUEUED 60 00 3d 00 20 00 00 00 05 ea 59 40 00 10d+04:42:42.751 READ FPDMA QUEUED Error 40124 [187] occurred at disk power-on lifetime: 21295 hours (887 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 18 00 00 1f a3 53 d8 40 00 Error: UNC at LBA = 0x1fa353d8 = 530797528 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 08 00 18 00 00 1f a3 53 00 40 00 10:54:50.351 READ FPDMA QUEUED 60 00 08 00 10 00 00 1f 64 75 b8 40 00 10:54:50.349 READ FPDMA QUEUED 60 00 08 00 50 00 00 1f 64 74 98 40 00 10:54:50.339 READ FPDMA QUEUED 60 01 08 00 08 00 00 1f e3 54 00 40 00 10:54:50.326 READ FPDMA QUEUED 60 00 08 00 00 00 00 1e e4 76 50 40 00 10:54:50.326 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 25 Celsius Power Cycle Min/Max Temperature: 16/39 Celsius Lifetime Min/Max Temperature: 7/48 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/55 Celsius Min/Max Temperature Limit: 5/55 Celsius Temperature History Size (Index): 478 (391) Index Estimated Time Temperature Celsius 392 2020-07-24 05:05 27 ******** ... ..( 21 skipped). .. ******** 414 2020-07-24 05:27 27 ******** 415 2020-07-24 05:28 26 ******* ... ..(110 skipped). .. ******* 48 2020-07-24 07:19 26 ******* 49 2020-07-24 07:20 25 ****** ... ..(341 skipped). .. ****** 391 2020-07-24 13:02 25 ****** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 5256 --- Lifetime Power-On Resets 0x01 0x010 4 22515 --- Power-on Hours 0x01 0x018 6 81749226911 --- Logical Sectors Written 0x01 0x020 6 1583012076 --- Number of Write Commands 0x01 0x028 6 106540151059 --- Logical Sectors Read 0x01 0x030 6 1638817448 --- Number of Read Commands 0x02 ===== = = === == Free-Fall Statistics (rev 1) == 0x02 0x010 4 448 --- Overlimit Shock Events 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 21574 --- Spindle Motor Power-on Hours 0x03 0x010 4 17076 --- Head Flying Hours 0x03 0x018 4 43581 --- Head Load Events 0x03 0x020 4 368 --- Number of Reallocated Logical Sectors 0x03 0x028 4 206 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 40130 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 13 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 25 --- Current Temperature 0x05 0x010 1 27 N-- Average Short Term Temperature 0x05 0x018 1 23 N-- Average Long Term Temperature 0x05 0x020 1 48 --- Highest Temperature 0x05 0x028 1 7 --- Lowest Temperature 0x05 0x030 1 40 N-- Highest Average Short Term Temperature 0x05 0x038 1 18 N-- Lowest Average Short Term Temperature 0x05 0x040 1 36 N-- Highest Average Long Term Temperature 0x05 0x048 1 22 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 55 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 5 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 27967 --- Number of Hardware Resets 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 37 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 1461289 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 5 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.7.8-200.fc32.x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Phison Driven SSDs Device Model: KINGSTON SA400S37480G Serial Number: -- LU WWN Device Id: 5 0026b7 ... Firmware Version: SBFKB1C3 User Capacity: 480,103,981,056 bytes [480 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Jul 24 13:02:18 2020 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (65535) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 000 100 000 - 0 9 Power_On_Hours -O--CK 100 100 000 - 7346 12 Power_Cycle_Count -O--CK 100 100 000 - 1531 148 Unknown_Attribute ------ 100 100 000 - 0 149 Unknown_Attribute ------ 100 100 000 - 0 167 Write_Protect_Mode ------ 100 100 000 - 0 168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 169 Bad_Block_Rate ------ 100 100 000 - 14 170 Bad_Blk_Ct_Erl/Lat ------ 100 100 010 - 0/10 172 Erase_Fail_Count -O--CK 100 100 000 - 0 173 MaxAvgErase_Ct ------ 100 100 000 - 84 (Average 59) 181 Program_Fail_Count -O--CK 100 100 000 - 0 182 Erase_Fail_Count ------ 100 100 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 389 194 Temperature_Celsius -O---K 075 058 000 - 25 (Min/Max 10/42) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 218 CRC_Error_Count -O--CK 100 100 000 - 0 231 SSD_Life_Left ------ 006 006 000 - 94 233 Flash_Writes_GiB -O--CK 100 100 000 - 17523 241 Lifetime_Writes_GiB -O--CK 100 100 000 - 7463 242 Lifetime_Reads_GiB -O--CK 100 100 000 - 8373 244 Average_Erase_Count ------ 100 100 000 - 59 245 Max_Erase_Count ------ 100 100 000 - 84 246 Total_Erase_Count ------ 100 100 000 - 920224 246 Total_Erase_Count ------ 100 100 000 - 920224 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1531 --- Lifetime Power-On Resets 0x01 0x010 4 7346 --- Power-on Hours 0x01 0x018 6 15651938133 --- Logical Sectors Written 0x01 0x028 6 17560420304 --- Logical Sectors Read 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 25 --- Current Temperature 0x05 0x020 1 42 --- Highest Temperature 0x05 0x028 1 10 --- Lowest Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 5 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 18 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 4 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdc smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.7.8-200.fc32.x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8U (USB) Device Model: ST1000LM025 HN-M101ABB Serial Number: -- LU WWN Device Id: 5 0000f0 ... Firmware Version: 2AR10001 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Jul 24 13:02:18 2020 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (13440) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 224) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 0 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 086 086 025 - 4462 4 Start_Stop_Count -O--CK 098 098 000 - 2204 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 1966 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 229 12 Power_Cycle_Count -O--CK 100 100 000 - 709 181 Program_Fail_Cnt_Total -O---K 100 100 000 - 32431 191 G-Sense_Error_Rate -O---K 100 100 000 - 3 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 064 057 000 - 28 (Min/Max 15/54) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 64 223 Load_Retry_Count -O--CK 100 100 000 - 229 225 Load_Cycle_Count -O--CK 098 098 000 - 23238 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 29 Celsius Power Cycle Min/Max Temperature: 22/36 Celsius Lifetime Min/Max Temperature: 12/54 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (103) Index Estimated Time Temperature Celsius 104 2020-07-24 02:25 29 ********** 105 2020-07-24 02:30 32 ************* ... ..( 7 skipped). .. ************* 113 2020-07-24 03:10 32 ************* 114 2020-07-24 03:15 33 ************** 115 2020-07-24 03:20 32 ************* 116 2020-07-24 03:25 33 ************** 117 2020-07-24 03:30 33 ************** 118 2020-07-24 03:35 34 *************** ... ..( 2 skipped). .. *************** 121 2020-07-24 03:50 34 *************** 122 2020-07-24 03:55 29 ********** 123 2020-07-24 04:00 30 *********** 124 2020-07-24 04:05 27 ******** 125 2020-07-24 04:10 28 ********* 126 2020-07-24 04:15 29 ********** 127 2020-07-24 04:20 31 ************ 0 2020-07-24 04:25 31 ************ 1 2020-07-24 04:30 31 ************ 2 2020-07-24 04:35 30 *********** 3 2020-07-24 04:40 28 ********* 4 2020-07-24 04:45 28 ********* 5 2020-07-24 04:50 31 ************ 6 2020-07-24 04:55 32 ************* 7 2020-07-24 05:00 35 **************** 8 2020-07-24 05:05 36 ***************** 9 2020-07-24 05:10 37 ****************** 10 2020-07-24 05:15 38 ******************* 11 2020-07-24 05:20 39 ******************** 12 2020-07-24 05:25 39 ******************** 13 2020-07-24 05:30 40 ********************* 14 2020-07-24 05:35 40 ********************* 15 2020-07-24 05:40 40 ********************* 16 2020-07-24 05:45 41 ********************** ... ..( 4 skipped). .. ********************** 21 2020-07-24 06:10 41 ********************** 22 2020-07-24 06:15 42 *********************** 23 2020-07-24 06:20 41 ********************** 24 2020-07-24 06:25 42 *********************** ... ..( 11 skipped). .. *********************** 36 2020-07-24 07:25 42 *********************** 37 2020-07-24 07:30 43 ************************ 38 2020-07-24 07:35 43 ************************ 39 2020-07-24 07:40 35 **************** ... ..( 2 skipped). .. **************** 42 2020-07-24 07:55 35 **************** 43 2020-07-24 08:00 26 ******* 44 2020-07-24 08:05 29 ********** 45 2020-07-24 08:10 31 ************ 46 2020-07-24 08:15 33 ************** 47 2020-07-24 08:20 34 *************** 48 2020-07-24 08:25 35 **************** 49 2020-07-24 08:30 36 ***************** 50 2020-07-24 08:35 37 ****************** 51 2020-07-24 08:40 37 ****************** 52 2020-07-24 08:45 38 ******************* ... ..( 2 skipped). .. ******************* 55 2020-07-24 09:00 38 ******************* 56 2020-07-24 09:05 37 ****************** 57 2020-07-24 09:10 35 **************** 58 2020-07-24 09:15 34 *************** 59 2020-07-24 09:20 33 ************** 60 2020-07-24 09:25 34 *************** 61 2020-07-24 09:30 35 **************** ... ..( 2 skipped). .. **************** 64 2020-07-24 09:45 35 **************** 65 2020-07-24 09:50 33 ************** 66 2020-07-24 09:55 32 ************* 67 2020-07-24 10:00 32 ************* 68 2020-07-24 10:05 31 ************ 69 2020-07-24 10:10 31 ************ 70 2020-07-24 10:15 30 *********** ... ..( 5 skipped). .. *********** 76 2020-07-24 10:45 30 *********** 77 2020-07-24 10:50 31 ************ 78 2020-07-24 10:55 28 ********* 79 2020-07-24 11:00 28 ********* 80 2020-07-24 11:05 27 ******** 81 2020-07-24 11:10 27 ******** 82 2020-07-24 11:15 28 ********* 83 2020-07-24 11:20 31 ************ 84 2020-07-24 11:25 33 ************** 85 2020-07-24 11:30 35 **************** 86 2020-07-24 11:35 36 ***************** 87 2020-07-24 11:40 37 ****************** 88 2020-07-24 11:45 37 ****************** 89 2020-07-24 11:50 26 ******* 90 2020-07-24 11:55 29 ********** 91 2020-07-24 12:00 31 ************ 92 2020-07-24 12:05 33 ************** 93 2020-07-24 12:10 35 **************** 94 2020-07-24 12:15 29 ********** 95 2020-07-24 12:20 30 *********** 96 2020-07-24 12:25 30 *********** 97 2020-07-24 12:30 29 ********** 98 2020-07-24 12:35 31 ************ 99 2020-07-24 12:40 33 ************** 100 2020-07-24 12:45 35 **************** 101 2020-07-24 12:50 36 ***************** 102 2020-07-24 12:55 36 ***************** 103 2020-07-24 13:00 28 ********* SMART WRITE LOG does not return COUNT and LBA_LOW register SCT (Get) Error Recovery Control command failed Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 0 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific