Probe #3128c1e8f5 of ASUSTek P7P55D-E Desktop Computer

Log: smartctl

/dev/sda === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F3 Device Model: SAMSUNG HD502HJ Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 1AJ10001 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sat Mar 27 07:13:28 2021 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4740) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 79) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 4319 2 Throughput_Performance -OS--K 055 055 000 - 4374 3 Spin_Up_Time PO---K 083 079 025 - 5269 4 Start_Stop_Count -O--CK 086 086 000 - 14334 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 37164 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 252 252 000 - 0 12 Power_Cycle_Count -O--CK 086 086 000 - 14697 191 G-Sense_Error_Rate -O---K 100 100 000 - 79 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 064 057 000 - 28 (Min/Max 10/43) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 100 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 071 001 000 - 15859 200 Multi_Zone_Error_Rate -O-R-K 001 001 000 - 82903 223 Load_Retry_Count -O--CK 252 252 000 - 0 225 Load_Cycle_Count -O--CK 099 099 000 - 14893 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 19664 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 19664 [7] occurred at disk power-on lifetime: 36892 hours (1537 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 00 74 67 55 e0 00 Error: UNC 1 sectors at LBA = 0x00746755 = 7628629 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 00 74 67 55 e0 00 00:00:09.761 READ DMA EXT 25 00 00 00 10 00 00 00 3a 20 80 e0 00 00:00:09.761 READ DMA EXT 25 00 00 00 38 00 00 00 11 af 70 e0 00 00:00:09.761 READ DMA EXT 25 00 00 00 40 00 00 01 64 18 90 e0 00 00:00:09.761 READ DMA EXT 25 00 00 01 00 00 00 01 64 17 90 e0 00 00:00:09.761 READ DMA EXT Error 19663 [6] occurred at disk power-on lifetime: 36892 hours (1537 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 0b 00 00 00 74 67 55 e0 00 Error: UNC 11 sectors at LBA = 0x00746755 = 7628629 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 00 00 74 67 40 e0 00 00:00:09.759 READ DMA EXT 35 00 00 00 08 00 00 00 74 67 20 e0 00 00:00:09.759 WRITE DMA EXT 25 00 00 00 38 00 00 00 11 af 70 e0 00 00:00:09.759 READ DMA EXT 35 00 00 00 20 00 00 05 7e 0a c0 e0 00 00:00:09.759 WRITE DMA EXT 25 00 00 00 38 00 00 00 11 af 70 e0 00 00:00:09.759 READ DMA EXT Error 19662 [5] occurred at disk power-on lifetime: 36890 hours (1537 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 ab 00 00 00 74 67 55 e0 00 Error: UNC 171 sectors at LBA = 0x00746755 = 7628629 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 00 74 67 00 e0 00 00:00:04.962 READ DMA EXT 25 00 00 00 38 00 00 00 22 79 28 e0 00 00:00:04.962 READ DMA EXT 25 00 00 00 38 00 00 00 11 af 70 e0 00 00:00:04.962 READ DMA EXT 25 00 00 00 38 00 00 00 22 79 28 e0 00 00:00:04.962 READ DMA EXT 25 00 00 00 38 00 00 00 11 af 70 e0 00 00:00:04.962 READ DMA EXT Error 19661 [4] occurred at disk power-on lifetime: 36890 hours (1537 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 ab 00 00 00 74 67 55 e0 00 Error: UNC 171 sectors at LBA = 0x00746755 = 7628629 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 00 74 67 00 e0 00 00:00:04.961 READ DMA EXT 25 00 00 00 38 00 00 00 11 af 70 e0 00 00:00:04.961 READ DMA EXT 25 00 00 00 38 00 00 00 22 79 28 e0 00 00:00:04.961 READ DMA EXT 25 00 00 00 38 00 00 00 11 af 70 e0 00 00:00:04.961 READ DMA EXT 25 00 00 00 38 00 00 00 22 79 28 e0 00 00:00:04.961 READ DMA EXT Error 19660 [3] occurred at disk power-on lifetime: 36890 hours (1537 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 ab 00 00 00 74 67 55 e0 00 Error: UNC 171 sectors at LBA = 0x00746755 = 7628629 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 00 74 67 00 e0 00 00:00:04.960 READ DMA EXT 25 00 00 00 38 00 00 00 11 af 70 e0 00 00:00:04.960 READ DMA EXT 35 00 00 00 08 00 00 00 31 b2 50 e0 00 00:00:04.960 WRITE DMA EXT 25 00 00 00 38 00 00 00 11 af 70 e0 00 00:00:04.960 READ DMA EXT 25 00 00 00 38 00 00 00 11 af 70 e0 00 00:00:04.960 READ DMA EXT Error 19659 [2] occurred at disk power-on lifetime: 36890 hours (1537 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 ab 00 00 00 74 67 55 e0 00 Error: UNC 171 sectors at LBA = 0x00746755 = 7628629 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 00 74 67 00 e0 00 00:00:04.958 READ DMA EXT 25 00 00 00 38 00 00 00 11 af 70 e0 00 00:00:04.958 READ DMA EXT 35 00 00 00 28 00 00 03 e9 c5 60 e0 00 00:00:04.958 WRITE DMA EXT 25 00 00 00 38 00 00 00 11 af 70 e0 00 00:00:04.958 READ DMA EXT 25 00 00 00 38 00 00 00 11 af 70 e0 00 00:00:04.958 READ DMA EXT Error 19658 [1] occurred at disk power-on lifetime: 36890 hours (1537 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 ab 00 00 00 74 67 55 e0 00 Error: UNC 171 sectors at LBA = 0x00746755 = 7628629 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 00 74 67 00 e0 00 00:00:04.957 READ DMA EXT 25 00 00 00 38 00 00 00 11 af 70 e0 00 00:00:04.957 READ DMA EXT 25 00 00 00 38 00 00 00 11 af 70 e0 00 00:00:04.957 READ DMA EXT 25 00 00 00 38 00 00 00 11 af 70 e0 00 00:00:04.957 READ DMA EXT 25 00 00 00 38 00 00 00 11 af 70 e0 00 00:00:04.957 READ DMA EXT Error 19657 [0] occurred at disk power-on lifetime: 36890 hours (1537 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 ab 00 00 00 74 67 55 e0 00 Error: UNC 171 sectors at LBA = 0x00746755 = 7628629 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 00 74 67 00 e0 00 00:00:04.956 READ DMA EXT 35 00 00 00 08 00 00 00 72 46 70 e0 00 00:00:04.956 WRITE DMA EXT ea 00 00 00 00 6f 1e ff 00 00 00 e0 00 00:00:04.956 FLUSH CACHE EXT 35 00 00 00 08 00 00 00 6f 1e f8 e0 00 00:00:04.956 WRITE DMA EXT 35 00 00 00 08 00 00 00 71 f5 38 e0 00 00:00:04.956 WRITE DMA EXT SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 36996 - # 2 Short offline Interrupted (host reset) 60% 16448 - # 3 Short offline Completed without error 00% 16398 - # 4 Short offline Completed without error 00% 16345 - # 5 Short offline Completed without error 00% 16293 - # 6 Short offline Completed without error 00% 16261 - # 7 Short offline Completed without error 00% 16235 - # 8 Short offline Completed without error 00% 16207 - # 9 Short offline Completed without error 00% 16149 - #10 Short offline Completed without error 00% 16105 - #11 Short offline Completed without error 00% 16041 - #12 Short offline Completed without error 00% 15988 - #13 Short offline Completed without error 00% 15966 - #14 Short offline Completed without error 00% 15892 - #15 Short offline Completed without error 00% 15873 - #16 Short offline Completed without error 00% 15843 - #17 Short offline Completed without error 00% 15803 - #18 Short offline Completed without error 00% 15765 - #19 Short offline Completed without error 00% 15706 - #20 Short offline Completed without error 00% 14551 - #21 Extended offline Aborted by host 30% 2825 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 27 Celsius Power Cycle Min/Max Temperature: 27/28 Celsius Lifetime Min/Max Temperature: 13/62 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (74) Index Estimated Time Temperature Celsius 75 2021-03-26 20:35 31 ************ 76 2021-03-26 20:40 22 *** 77 2021-03-26 20:45 24 ***** 78 2021-03-26 20:50 26 ******* 79 2021-03-26 20:55 27 ******** 80 2021-03-26 21:00 27 ******** 81 2021-03-26 21:05 28 ********* 82 2021-03-26 21:10 28 ********* 83 2021-03-26 21:15 29 ********** ... ..( 18 skipped). .. ********** 102 2021-03-26 22:50 29 ********** 103 2021-03-26 22:55 28 ********* ... ..( 19 skipped). .. ********* 123 2021-03-27 00:35 28 ********* 124 2021-03-27 00:40 29 ********** 125 2021-03-27 00:45 28 ********* ... ..( 3 skipped). .. ********* 1 2021-03-27 01:05 28 ********* 2 2021-03-27 01:10 26 ******* 3 2021-03-27 01:15 26 ******* 4 2021-03-27 01:20 27 ******** ... ..( 2 skipped). .. ******** 7 2021-03-27 01:35 27 ******** 8 2021-03-27 01:40 26 ******* ... ..( 6 skipped). .. ******* 15 2021-03-27 02:15 26 ******* 16 2021-03-27 02:20 27 ******** 17 2021-03-27 02:25 27 ******** 18 2021-03-27 02:30 27 ******** 19 2021-03-27 02:35 26 ******* 20 2021-03-27 02:40 26 ******* 21 2021-03-27 02:45 26 ******* 22 2021-03-27 02:50 27 ******** 23 2021-03-27 02:55 26 ******* ... ..( 3 skipped). .. ******* 27 2021-03-27 03:15 26 ******* 28 2021-03-27 03:20 27 ******** 29 2021-03-27 03:25 26 ******* 30 2021-03-27 03:30 26 ******* 31 2021-03-27 03:35 26 ******* 32 2021-03-27 03:40 27 ******** ... ..( 10 skipped). .. ******** 43 2021-03-27 04:35 27 ******** 44 2021-03-27 04:40 25 ****** 45 2021-03-27 04:45 26 ******* 46 2021-03-27 04:50 26 ******* 47 2021-03-27 04:55 27 ******** ... ..( 13 skipped). .. ******** 61 2021-03-27 06:05 27 ******** 62 2021-03-27 06:10 28 ********* 63 2021-03-27 06:15 28 ********* 64 2021-03-27 06:20 27 ******** 65 2021-03-27 06:25 27 ******** 66 2021-03-27 06:30 28 ********* 67 2021-03-27 06:35 27 ******** 68 2021-03-27 06:40 27 ******** 69 2021-03-27 06:45 28 ********* ... ..( 3 skipped). .. ********* 73 2021-03-27 07:05 28 ********* 74 2021-03-27 07:10 27 ******** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 3 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific /dev/sdc === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint P80 Device Model: SAMSUNG SP0842N Serial Number: -- Firmware Version: BH100-35 User Capacity: 80,026,361,856 bytes [80.0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 T13/1532D revision 4a Local Time is: Sat Mar 27 07:13:28 2021 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 145 (intermediate), recommended: 254 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 1803) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 30) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 253 100 051 - 0 3 Spin_Up_Time POS--- 100 100 025 - 4096 4 Start_Stop_Count -O--CK 085 085 000 - 15400 5 Reallocated_Sector_Ct PO--CK 099 099 010 - 11 7 Seek_Error_Rate POSR-- 253 253 051 - 0 8 Seek_Time_Performance P-S--K 253 253 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 19944 10 Spin_Retry_Count PO--CK 253 253 051 - 0 11 Calibration_Retry_Count -O--C- 253 253 000 - 0 12 Power_Cycle_Count -O--CK 092 092 000 - 8082 187 Reported_Uncorrect -O--CK 001 001 000 - 1704532 190 Airflow_Temperature_Cel -O---K 130 082 045 - 36 194 Temperature_Celsius -O---K 130 082 000 - 36 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 1011 196 Reallocated_Event_Count -O--CK 099 099 000 - 11 197 Current_Pending_Sector -O--C- 253 100 000 - 0 198 Offline_Uncorrectable ----CK 253 253 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 46 200 Multi_Zone_Error_Rate -O-R-- 253 100 000 - 0 201 Soft_Read_Error_Rate -O-R-- 253 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Invalid Error Log index = 0x0000, trying reserved byte (0x05) instead Device Error Count: 645 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 645 [4] occurred at disk power-on lifetime: 19936 hours (830 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 08 00 00 00 00 00 00 f0 00 Error: ICRC, ABRT 8 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 00 00 00 00 f0 00 00:08:01.938 READ DMA 27 00 00 00 00 00 00 00 00 00 00 f0 00 00:08:01.938 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 03 00 00 00 00 00 00 00 00 00 b0 00 00:08:01.938 IDENTIFY DEVICE ef 00 03 00 42 00 00 00 00 00 00 b0 00 00:08:01.938 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 f0 00 00:08:01.938 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 644 [3] occurred at disk power-on lifetime: 19936 hours (830 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 08 00 00 00 00 00 00 f0 00 Error: ICRC, ABRT 8 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 00 00 00 00 f0 00 00:08:01.750 READ DMA 27 00 00 00 00 00 00 00 00 00 00 f0 00 00:08:01.750 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 03 00 00 00 00 00 00 00 00 00 b0 00 00:08:01.750 IDENTIFY DEVICE ef 00 03 00 44 00 00 00 00 00 00 b0 00 00:08:01.750 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 f0 00 00:08:01.750 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 643 [2] occurred at disk power-on lifetime: 19936 hours (830 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 08 00 00 00 00 00 00 f0 00 Error: ICRC, ABRT 8 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 00 00 00 00 f0 00 00:08:01.563 READ DMA 27 00 00 00 00 00 00 00 00 00 00 f0 00 00:08:01.563 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 03 00 00 00 00 00 00 00 00 00 b0 00 00:08:01.563 IDENTIFY DEVICE ef 00 03 00 45 00 00 00 00 00 00 b0 00 00:08:01.563 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 f0 00 00:08:01.563 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 642 [1] occurred at disk power-on lifetime: 19936 hours (830 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 08 00 00 00 00 00 00 f0 00 Error: ICRC, ABRT 8 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 00 00 00 00 f0 00 00:07:59.063 READ DMA e0 00 00 00 00 00 00 00 00 00 00 b0 00 00:07:58.750 STANDBY IMMEDIATE e7 00 00 00 00 00 00 00 50 f8 af b0 00 00:07:58.750 FLUSH CACHE 27 00 00 00 00 00 00 00 00 00 00 f0 00 00:07:58.750 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 03 00 00 00 00 00 00 00 00 00 b0 00 00:07:58.750 IDENTIFY DEVICE Error 641 [0] occurred at disk power-on lifetime: 19936 hours (830 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 08 00 00 00 00 00 08 f0 00 Error: ICRC, ABRT 8 sectors at LBA = 0x00000008 = 8 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 00 00 00 08 f0 00 00:07:47.563 READ DMA c8 00 00 00 08 00 00 00 50 f8 a0 f9 00 00:07:47.563 READ DMA c8 00 00 00 08 00 00 00 50 f8 00 f9 00 00:07:47.500 READ DMA ec 00 00 00 01 00 00 00 00 00 00 10 00 00:07:47.500 IDENTIFY DEVICE e5 00 00 00 00 00 00 00 00 00 00 10 00 00:04:00.313 CHECK POWER MODE Error 640 [7] occurred at disk power-on lifetime: 19936 hours (830 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 20 00 00 00 00 00 3f f0 00 Error: ICRC, ABRT 32 sectors at LBA = 0x0000003f = 63 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 da 00 00 20 00 00 00 00 00 3f f0 00 00:03:27.188 READ DMA b0 d0 da 00 00 00 00 00 c2 4f 00 10 00 00:02:18.750 SMART RETURN STATUS b0 d1 d0 00 01 00 00 00 c2 4f 00 10 00 00:02:18.688 SMART READ DATA b0 00 d1 00 01 00 00 00 c2 4f 00 10 00 00:02:18.688 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] ec 00 00 00 01 00 00 00 00 00 00 10 00 00:02:18.688 IDENTIFY DEVICE Error 639 [6] occurred at disk power-on lifetime: 19935 hours (830 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 03 03 00 01 00 00 00 00 00 00 e0 00 00:03:57.750 READ DMA EXT ef 03 03 00 40 00 00 00 00 00 00 a0 00 00:03:56.750 SET FEATURES [Set transfer mode] Error 638 [5] occurred at disk power-on lifetime: 19935 hours (830 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 03 03 00 01 00 00 00 00 00 00 e0 00 00:03:56.750 READ DMA EXT ef 03 03 00 41 00 00 00 00 00 00 a0 00 00:03:55.750 SET FEATURES [Set transfer mode] SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: --/36 Celsius Lifetime Min/Max Temperature: --/54 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 10/55 Celsius Min/Max Temperature Limit: 5/60 Celsius Temperature History Size (Index): 128 (127) Index Estimated Time Temperature Celsius 0 2021-03-27 05:06 ? - 1 2021-03-27 05:07 36 ***************** ... ..( 11 skipped). .. ***************** 13 2021-03-27 05:19 36 ***************** 14 2021-03-27 05:20 ? - 15 2021-03-27 05:21 36 ***************** ... ..( 52 skipped). .. ***************** 68 2021-03-27 06:14 36 ***************** 69 2021-03-27 06:15 ? - 70 2021-03-27 06:16 36 ***************** ... ..( 19 skipped). .. ***************** 90 2021-03-27 06:36 36 ***************** 91 2021-03-27 06:37 ? - 92 2021-03-27 06:38 36 ***************** ... ..( 34 skipped). .. ***************** 127 2021-03-27 07:13 36 ***************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) not supported


Hardware for Linux and BSD

GitHub