/dev/sda === START OF INFORMATION SECTION === Model Family: Intel 520 Series SSDs Device Model: INTEL SSDSC2CW180A3 Serial Number: -- LU WWN Device Id: 5 001517 ... Firmware Version: 400i User Capacity: 180 045 766 656 bytes [180 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Apr 26 07:22:03 2017 +04 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Disabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 2097) seconds. Offline data collection capabilities: (0x7f) SMART execute Offline immediate. Auto Offline data collection on/off support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 48) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0021) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 9 Power_On_Hours_and_Msec -O--CK 000 000 000 - 900576h+00m+34.410s 12 Power_Cycle_Count -O--CK 097 097 000 - 3214 170 Available_Reservd_Space PO--CK 100 100 010 - 0 171 Program_Fail_Count -O--CK 100 100 000 - 0 172 Erase_Fail_Count -O--CK 100 100 000 - 0 174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 3214 184 End-to-End_Error PO--CK 100 100 090 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 3214 225 Host_Writes_32MiB -O--CK 100 100 000 - 408685 226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 52 228 Workload_Minutes -O--CK 100 100 000 - 65535 232 Available_Reservd_Space PO--CK 100 100 010 - 0 233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 241 Host_Writes_32MiB -O--CK 100 100 000 - 408685 242 Host_Reads_32MiB -O--CK 100 100 000 - 449528 249 NAND_Writes_1GiB PO--C- 100 100 000 - 11627 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x04 GPL,SL R/O 1 Device Statistics log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xb7 GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log not supported SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Self-test routine in progress 80% 4092 - # 2 Extended offline Self-test routine in progress 80% 4091 - # 3 Extended offline Self-test routine in progress 60% 4091 - # 4 Extended offline Self-test routine in progress 60% 4091 - # 5 Extended offline Self-test routine in progress 20% 4089 - # 6 Extended offline Self-test routine in progress 90% 3978 - # 7 Extended offline Self-test routine in progress 90% 3978 - # 8 Extended offline Self-test routine in progress 90% 3978 - # 9 Extended offline Self-test routine in progress 90% 3978 - #10 Extended offline Self-test routine in progress 90% 3977 - #11 Extended offline Self-test routine in progress 90% 3977 - #12 Extended offline Self-test routine in progress 90% 3977 - #13 Extended offline Self-test routine in progress 90% 3977 - #14 Extended offline Self-test routine in progress 90% 3977 - #15 Extended offline Self-test routine in progress 90% 3977 - #16 Extended offline Self-test routine in progress 90% 3977 - #17 Extended offline Self-test routine in progress 90% 3977 - #18 Extended offline Self-test routine in progress 90% 3977 - #19 Extended offline Self-test routine in progress 90% 4092 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) SCT Support Level: 1 Device State: Active (0) Current Temperature: ? Celsius Power Cycle Min/Max Temperature: 127/-127 Celsius Lifetime Min/Max Temperature: 0/ 0 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 10 (Unknown, should be 2) Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/100 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 49763 (321) Invalid Temperature History Size or Index SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 3220 --- Lifetime Power-On Resets 0x01 0x010 4 5782 --- Power-on Hours 0x01 0x018 6 26987921935 --- Logical Sectors Written 0x01 0x028 6 29645063902 --- Logical Sectors Read 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 16709 --- Resets Between Cmd Acceptance and Completion 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 16709 --- Number of Hardware Resets 0x06 0x010 4 7169 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 255 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdb === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K1000.B Device Model: Hitachi HDT721010SLA360 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: ST6OA3AA User Capacity: 1 000 203 804 160 bytes [1,00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed Apr 26 07:22:03 2017 +04 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 128 APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (14090) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 235) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 114 114 054 - 185 3 Spin_Up_Time POS--- 123 123 024 - 473 (Average 457) 4 Start_Stop_Count -O--C- 099 099 000 - 6264 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 1 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 123 123 020 - 34 9 Power_On_Hours -O--C- 099 099 000 - 10338 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 4487 192 Power-Off_Retract_Count -O--CK 095 095 000 - 6279 193 Load_Cycle_Count -O--C- 095 095 000 - 6279 194 Temperature_Celsius -O---- 187 187 000 - 32 (Min/Max 8/51) 196 Reallocated_Event_Count -O--CK 100 100 000 - 2 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 8471 - # 2 Extended offline Completed without error 00% 8300 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 24/32 Celsius Lifetime Min/Max Temperature: 8/51 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (118) Index Estimated Time Temperature Celsius 119 2017-04-26 05:15 35 **************** ... ..( 9 skipped). .. **************** 1 2017-04-26 05:25 35 **************** 2 2017-04-26 05:26 36 ***************** ... ..( 5 skipped). .. ***************** 8 2017-04-26 05:32 36 ***************** 9 2017-04-26 05:33 37 ****************** 10 2017-04-26 05:34 37 ****************** 11 2017-04-26 05:35 36 ***************** ... ..( 11 skipped). .. ***************** 23 2017-04-26 05:47 36 ***************** 24 2017-04-26 05:48 35 **************** ... ..( 8 skipped). .. **************** 33 2017-04-26 05:57 35 **************** 34 2017-04-26 05:58 ? - 35 2017-04-26 05:59 30 *********** 36 2017-04-26 06:00 30 *********** 37 2017-04-26 06:01 31 ************ 38 2017-04-26 06:02 31 ************ 39 2017-04-26 06:03 32 ************* ... ..( 3 skipped). .. ************* 43 2017-04-26 06:07 32 ************* 44 2017-04-26 06:08 33 ************** 45 2017-04-26 06:09 33 ************** 46 2017-04-26 06:10 34 *************** ... ..( 10 skipped). .. *************** 57 2017-04-26 06:21 34 *************** 58 2017-04-26 06:22 ? - 59 2017-04-26 06:23 29 ********** 60 2017-04-26 06:24 29 ********** 61 2017-04-26 06:25 30 *********** 62 2017-04-26 06:26 30 *********** 63 2017-04-26 06:27 30 *********** 64 2017-04-26 06:28 31 ************ ... ..( 3 skipped). .. ************ 68 2017-04-26 06:32 31 ************ 69 2017-04-26 06:33 32 ************* ... ..( 4 skipped). .. ************* 74 2017-04-26 06:38 32 ************* 75 2017-04-26 06:39 33 ************** 76 2017-04-26 06:40 33 ************** 77 2017-04-26 06:41 ? - 78 2017-04-26 06:42 24 ***** 79 2017-04-26 06:43 25 ****** 80 2017-04-26 06:44 25 ****** 81 2017-04-26 06:45 25 ****** 82 2017-04-26 06:46 26 ******* 83 2017-04-26 06:47 26 ******* 84 2017-04-26 06:48 27 ******** 85 2017-04-26 06:49 27 ******** 86 2017-04-26 06:50 27 ******** 87 2017-04-26 06:51 28 ********* ... ..( 2 skipped). .. ********* 90 2017-04-26 06:54 28 ********* 91 2017-04-26 06:55 29 ********** 92 2017-04-26 06:56 29 ********** 93 2017-04-26 06:57 29 ********** 94 2017-04-26 06:58 30 *********** 95 2017-04-26 06:59 30 *********** 96 2017-04-26 07:00 31 ************ ... ..( 14 skipped). .. ************ 111 2017-04-26 07:15 31 ************ 112 2017-04-26 07:16 32 ************* 113 2017-04-26 07:17 31 ************ 114 2017-04-26 07:18 31 ************ 115 2017-04-26 07:19 32 ************* ... ..( 2 skipped). .. ************* 118 2017-04-26 07:22 32 ************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS