/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.7.9-200.fc32.x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD5000AAKX-07U6AA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 17.01H17 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Jul 22 19:33:21 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Disabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 7860) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 80) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 1 3 Spin_Up_Time POS--K 142 138 021 - 3900 4 Start_Stop_Count -O--CK 095 095 000 - 5605 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 079 079 000 - 15693 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 095 095 000 - 5518 192 Power-Off_Retract_Count -O--CK 199 199 000 - 857 193 Load_Cycle_Count -O--CK 199 199 000 - 4747 194 Temperature_Celsius -O---K 106 094 000 - 37 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 21 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 21 [20] occurred at disk power-on lifetime: 13023 hours (542 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 01 00 00 00 00 00 00 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 05:11:08.675 SMART WRITE LOG b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 05:11:08.675 SMART WRITE LOG b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 05:11:08.674 SMART WRITE LOG b0 00 d0 00 00 00 00 00 c2 4f 00 a0 00 05:00:10.800 SMART READ DATA b0 00 da 00 00 00 00 00 c2 4f 00 a0 00 05:00:10.723 SMART RETURN STATUS Error 20 [19] occurred at disk power-on lifetime: 13023 hours (542 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 01 00 00 00 00 00 00 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 05:11:08.675 SMART WRITE LOG b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 05:11:08.674 SMART WRITE LOG b0 00 d0 00 00 00 00 00 c2 4f 00 a0 00 05:00:10.800 SMART READ DATA b0 00 da 00 00 00 00 00 c2 4f 00 a0 00 05:00:10.723 SMART RETURN STATUS b0 00 d0 00 01 00 00 00 c2 4f 00 a0 00 04:30:59.413 SMART READ DATA Error 19 [18] occurred at disk power-on lifetime: 13023 hours (542 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 01 00 00 00 00 00 00 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 05:11:08.674 SMART WRITE LOG b0 00 d0 00 00 00 00 00 c2 4f 00 a0 00 05:00:10.800 SMART READ DATA b0 00 da 00 00 00 00 00 c2 4f 00 a0 00 05:00:10.723 SMART RETURN STATUS b0 00 d0 00 01 00 00 00 c2 4f 00 a0 00 04:30:59.413 SMART READ DATA b0 00 da 00 01 00 00 00 c2 4f 00 a0 00 04:30:59.338 SMART RETURN STATUS Error 18 [17] occurred at disk power-on lifetime: 12964 hours (540 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 01 00 00 00 00 00 00 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:53:37.121 SMART WRITE LOG b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:53:37.121 SMART WRITE LOG b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:53:37.120 SMART WRITE LOG ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:53:19.437 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:52:35.741 IDENTIFY DEVICE Error 17 [16] occurred at disk power-on lifetime: 12964 hours (540 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 01 00 00 00 00 00 00 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:53:37.121 SMART WRITE LOG b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:53:37.120 SMART WRITE LOG ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:53:19.437 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:52:35.741 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:52:35.716 IDENTIFY DEVICE Error 16 [15] occurred at disk power-on lifetime: 12964 hours (540 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 01 00 00 00 00 00 00 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:53:37.120 SMART WRITE LOG ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:53:19.437 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:52:35.741 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:52:35.716 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:52:35.331 IDENTIFY DEVICE Error 15 [14] occurred at disk power-on lifetime: 12926 hours (538 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 01 00 00 00 00 00 00 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:51:55.779 SMART WRITE LOG b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:51:55.778 SMART WRITE LOG b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:51:55.778 SMART WRITE LOG b0 00 d0 00 01 00 00 00 c2 4f 01 a0 00 00:50:48.265 SMART READ DATA b0 00 d0 00 01 00 00 00 c2 4f 01 a0 00 00:50:38.179 SMART READ DATA Error 14 [13] occurred at disk power-on lifetime: 12926 hours (538 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 01 00 00 00 00 00 00 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:51:55.778 SMART WRITE LOG b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:51:55.778 SMART WRITE LOG b0 00 d0 00 01 00 00 00 c2 4f 01 a0 00 00:50:48.265 SMART READ DATA b0 00 d0 00 01 00 00 00 c2 4f 01 a0 00 00:50:38.179 SMART READ DATA b0 00 d0 00 01 00 00 00 c2 4f 01 a0 00 00:50:28.092 SMART READ DATA SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15690 - # 2 Short offline Completed without error 00% 15606 - # 3 Short offline Completed without error 00% 15454 - # 4 Short offline Completed without error 00% 15440 - # 5 Extended offline Interrupted (host reset) 90% 15423 - # 6 Short offline Completed without error 00% 15392 - # 7 Short offline Completed without error 00% 15375 - # 8 Short offline Completed without error 00% 13918 - # 9 Short offline Completed without error 00% 11206 - #10 Short offline Completed without error 00% 11147 - #11 Short offline Completed without error 00% 11129 - #12 Short offline Completed without error 00% 8283 - #13 Short offline Completed without error 00% 8280 - #14 Short offline Completed without error 00% 8214 - #15 Short offline Completed without error 00% 5706 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 26/37 Celsius Lifetime Min/Max Temperature: 0/49 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (324) Index Estimated Time Temperature Celsius 325 2020-07-22 11:36 36 ***************** ... ..( 2 skipped). .. ***************** 328 2020-07-22 11:39 36 ***************** 329 2020-07-22 11:40 ? - 330 2020-07-22 11:41 26 ******* 331 2020-07-22 11:42 26 ******* 332 2020-07-22 11:43 27 ******** 333 2020-07-22 11:44 28 ********* 334 2020-07-22 11:45 29 ********** 335 2020-07-22 11:46 29 ********** 336 2020-07-22 11:47 30 *********** 337 2020-07-22 11:48 30 *********** 338 2020-07-22 11:49 31 ************ 339 2020-07-22 11:50 31 ************ 340 2020-07-22 11:51 32 ************* 341 2020-07-22 11:52 32 ************* 342 2020-07-22 11:53 33 ************** ... ..( 2 skipped). .. ************** 345 2020-07-22 11:56 33 ************** 346 2020-07-22 11:57 34 *************** 347 2020-07-22 11:58 34 *************** 348 2020-07-22 11:59 34 *************** 349 2020-07-22 12:00 35 **************** 350 2020-07-22 12:01 34 *************** 351 2020-07-22 12:02 35 **************** ... ..( 10 skipped). .. **************** 362 2020-07-22 12:13 35 **************** 363 2020-07-22 12:14 36 ***************** ... ..( 6 skipped). .. ***************** 370 2020-07-22 12:21 36 ***************** 371 2020-07-22 12:22 37 ****************** ... ..(116 skipped). .. ****************** 10 2020-07-22 14:19 37 ****************** 11 2020-07-22 14:20 36 ***************** 12 2020-07-22 14:21 37 ****************** 13 2020-07-22 14:22 36 ***************** 14 2020-07-22 14:23 37 ****************** 15 2020-07-22 14:24 36 ***************** 16 2020-07-22 14:25 36 ***************** 17 2020-07-22 14:26 36 ***************** 18 2020-07-22 14:27 37 ****************** ... ..( 48 skipped). .. ****************** 67 2020-07-22 15:16 37 ****************** 68 2020-07-22 15:17 36 ***************** 69 2020-07-22 15:18 34 *************** ... ..( 11 skipped). .. *************** 81 2020-07-22 15:30 34 *************** 82 2020-07-22 15:31 35 **************** ... ..( 66 skipped). .. **************** 149 2020-07-22 16:38 35 **************** 150 2020-07-22 16:39 36 ***************** ... ..(173 skipped). .. ***************** 324 2020-07-22 19:33 36 ***************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 9 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 13206 Vendor specific /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.7.9-200.fc32.x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 1100 SSDs Device Model: CT960BX500SSD1 Serial Number: -- LU WWN Device Id: 0 000000 ... Firmware Version: M6CR022 User Capacity: 960,197,124,096 bytes [960 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Jul 22 19:33:21 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Disabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 000 100 000 - 0 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 100 100 000 - 1787 12 Power_Cycle_Count -O--CK 100 100 000 - 408 171 Program_Fail_Count -O--CK 100 100 000 - 0 172 Erase_Fail_Count -O--CK 000 000 000 - 0 173 Ave_Block-Erase_Count -O--CK 000 000 000 - 15 174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 169 180 Unused_Reserve_NAND_Blk PO--CK 100 100 000 - 225 183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 184 Error_Correction_Count -O--CK 100 100 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 194 Temperature_Celsius -O---K 065 038 000 - 35 (Min/Max 10/62) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 202 Percent_Lifetime_Remain ----CK 100 100 001 - 0 206 Write_Error_Rate -OSR-- 000 000 000 - 0 210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 246 Total_LBAs_Written -O--CK 100 100 000 - 10517908267 247 Host_Program_Page_Count -O--CK 100 100 000 - 328684633 248 FTL_Program_Page_Count -O--CK 100 100 000 - 88584192 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 88 Current Device Internal Status Data log 0x25 GPL R/O 32 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1784 - # 2 Short offline Completed without error 00% 1706 - # 3 Short offline Completed without error 00% 1565 - # 4 Short offline Completed without error 00% 1552 - # 5 Extended offline Interrupted (host reset) 90% 1536 - # 6 Short offline Completed without error 00% 1509 - # 7 Short offline Completed without error 00% 1492 - # 8 Short offline Completed without error 00% 727 - # 9 Short offline Completed without error 00% 275 - Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 408 --- Lifetime Power-On Resets 0x01 0x010 4 1787 --- Power-on Hours 0x01 0x018 6 1927973675 --- Logical Sectors Written 0x01 0x020 6 84862650 --- Number of Write Commands 0x01 0x028 6 4207469343 --- Logical Sectors Read 0x01 0x030 6 51075925 --- Number of Read Commands 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x000a 4 10 Device-to-host register FISes sent due to a COMRESET /dev/sdc smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.7.9-200.fc32.x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Phison Driven SSDs Device Model: KINGSTON SA400S37480G Serial Number: -- LU WWN Device Id: 5 0026b7 ... Firmware Version: SBFKB1D1 User Capacity: 480,103,981,056 bytes [480 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Jul 22 19:33:21 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Disabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (65535) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 000 100 000 - 0 9 Power_On_Hours -O--CK 100 100 000 - 4832 12 Power_Cycle_Count -O--CK 100 100 000 - 983 148 Unknown_Attribute ------ 100 100 000 - 0 149 Unknown_Attribute ------ 100 100 000 - 0 167 Write_Protect_Mode ------ 100 100 000 - 0 168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 169 Bad_Block_Rate ------ 100 100 000 - 20 170 Bad_Blk_Ct_Erl/Lat ------ 100 100 010 - 0/14 172 Erase_Fail_Count -O--CK 100 100 000 - 0 173 MaxAvgErase_Ct ------ 100 100 000 - 78 (Average 72) 181 Program_Fail_Count -O--CK 100 100 000 - 0 182 Erase_Fail_Count ------ 100 100 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 500 194 Temperature_Celsius -O---K 068 051 000 - 32 (Min/Max 18/49) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 218 CRC_Error_Count -O--CK 100 100 000 - 0 231 SSD_Life_Left ------ 008 008 000 - 92 233 Flash_Writes_GiB -O--CK 100 100 000 - 20335 241 Lifetime_Writes_GiB -O--CK 100 100 000 - 14002 242 Lifetime_Reads_GiB -O--CK 100 100 000 - 11535 244 Average_Erase_Count ------ 100 100 000 - 72 245 Max_Erase_Count ------ 100 100 000 - 78 246 Total_Erase_Count ------ 100 100 000 - 1111424 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 4829 - # 2 Short offline Completed without error 00% 4745 - # 3 Short offline Completed without error 00% 4593 - # 4 Short offline Completed without error 00% 4578 - # 5 Extended offline Interrupted (host reset) 00% 4561 - # 6 Short offline Completed without error 00% 4531 - # 7 Short offline Completed without error 00% 4513 - # 8 Short offline Completed without error 00% 3311 - # 9 Short offline Completed without error 00% 601 - #10 Short offline Completed without error 00% 543 - #11 Short offline Completed without error 00% 525 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 983 --- Lifetime Power-On Resets 0x01 0x010 4 4832 --- Power-on Hours 0x01 0x018 6 29366075132 --- Logical Sectors Written 0x01 0x028 6 24192484967 --- Logical Sectors Read 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 32 --- Current Temperature 0x05 0x020 1 49 --- Highest Temperature 0x05 0x028 1 18 --- Lowest Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 7 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 10 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 11 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdd smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.7.9-200.fc32.x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: ADATA SP610 Serial Number: -- Firmware Version: N0307A User Capacity: 128,035,676,160 bytes [128 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Jul 22 19:33:22 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Disabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 9 Power_On_Hours ------ 100 100 000 - 967 12 Power_Cycle_Count ------ 100 100 000 - 2131 192 Power-Off_Retract_Count ------ 100 100 000 - 207 194 Temperature_Celsius ------ 100 100 000 - 33 195 Hardware_ECC_Recovered ------ 100 100 000 - 11044 196 Reallocated_Event_Count ------ 100 100 016 - 0 199 UDMA_CRC_Error_Count ------ 100 100 050 - 3 160 Unknown_Attribute ------ 100 100 000 - 0 161 Unknown_Attribute ------ 100 100 000 - 45 163 Unknown_Attribute ------ 100 100 000 - 1 164 Unknown_Attribute ------ 100 100 000 - 265217 165 Unknown_Attribute ------ 100 100 000 - 307 166 Unknown_Attribute ------ 100 100 000 - 211 167 Unknown_Attribute ------ 100 100 000 - 261 241 Total_LBAs_Written ------ 100 100 000 - 166710 242 Total_LBAs_Read ------ 100 100 000 - 172067 168 Unknown_Attribute ------ 100 100 000 - 3000 169 Unknown_Attribute ------ 100 100 000 - 93 232 Available_Reservd_Space ------ 100 100 000 - 100 175 Program_Fail_Count_Chip ------ 100 100 000 - 0 176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 177 Wear_Leveling_Count ------ 100 100 050 - 141 178 Used_Rsvd_Blk_Cnt_Chip ------ 100 100 000 - 0 181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 182 Erase_Fail_Count_Total ------ 100 100 000 - 0 187 Reported_Uncorrect ------ 100 100 000 - 0 225 Unknown_SSD_Attribute ------ 100 100 000 - 166710 198 Offline_Uncorrectable ------ 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 1 Comprehensive SMART error log 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 967 - # 2 Short offline Completed without error 00% 967 - # 3 Short offline Completed without error 00% 967 - # 4 Reserved (0x0e) Completed without error 00% 967 - # 5 Vendor (0xc2) Unknown status (0xe) 70% 967 - # 6 Short offline Unknown status (0xb) 10% 967 - # 7 Short offline Completed without error 00% 967 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 2131 --- Lifetime Power-On Resets 0x01 0x010 4 967 --- Power-on Hours 0x01 0x018 6 2335618260 --- Logical Sectors Written 0x01 0x020 6 151147126 --- Number of Write Commands 0x01 0x028 6 2686712649 --- Logical Sectors Read 0x01 0x030 6 181802702 --- Number of Read Commands 0x02 ===== = = === == Free-Fall Statistics (empty) == 0x03 ===== = = === == Rotating Media Statistics (empty) == 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 208 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (empty) == 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 4248 --- Number of Hardware Resets 0x06 0x018 4 3 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 8 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) not supported