/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.3.1-arch1-1] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Phison Driven OEM SSDs Device Model: SATA SSD Serial Number: -- LU WWN Device Id: 0 000000 ... Firmware Version: SBFM11.2 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: In smartctl database 7.3/5319 ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun May 7 07:15:54 2023 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (65535) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 9 Power_On_Hours -O--C- 100 100 000 - 39002 12 Power_Cycle_Count -O--C- 100 100 000 - 623 168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 170 Bad_Blk_Ct_Erl/Lat PO---- 072 072 000 - 0/275 173 MaxAvgErase_Ct -O--C- 100 100 000 - 321 (Average 293) 192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 488 194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) 218 CRC_Error_Count PO-R-- 100 100 050 - 0 231 SSD_Life_Left PO--C- 100 100 000 - 70 241 Lifetime_Writes_GiB -O--C- 100 100 000 - 15643 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 623 --- Lifetime Power-On Resets 0x01 0x010 4 39002 --- Power-on Hours 0x01 0x018 6 32807291445 --- Logical Sectors Written 0x01 0x028 6 32841632158 --- Logical Sectors Read 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 33 --- Current Temperature 0x05 0x020 1 33 --- Highest Temperature 0x05 0x028 1 33 --- Lowest Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 29 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 39 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 38 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.3.1-arch1-1] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba 3.5" MG03ACAxxx(Y) Enterprise HDD Device Model: TOSHIBA MG03ACA400 Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: FL1A User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun May 7 07:15:54 2023 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 627) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 2 Throughput_Performance P-S--- 100 100 050 - 0 3 Spin_Up_Time POS--K 100 100 001 - 10733 4 Start_Stop_Count -O--CK 100 100 000 - 147 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 8 Seek_Time_Performance P-S--- 100 100 050 - 0 9 Power_On_Hours -O--CK 074 074 000 - 10501 10 Spin_Retry_Count PO--CK 102 100 030 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 147 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 95 193 Load_Cycle_Count -O--CK 100 100 000 - 379 194 Temperature_Celsius -O---K 100 100 000 - 38 (Min/Max 16/45) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 45 220 Disk_Shift -O---- 100 100 000 - 0 222 Loaded_Hours -O--CK 095 095 000 - 2338 223 Load_Retry_Count -O--CK 100 100 000 - 0 224 Load_Friction -O---K 100 100 000 - 0 226 Load-in_Time -OS--K 100 100 000 - 587 240 Head_Flying_Hours P----- 100 100 001 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) Device Error Count: 45 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 45 [44] occurred at disk power-on lifetime: 1422 hours (59 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 41 00 10 00 01 c2 ff 73 ff 40 00 Error: ICRC, ABRT at LBA = 0x1c2ff73ff = 7566488575 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 01 80 00 20 00 01 c2 ff 77 80 40 00 29d+09:24:50.857 WRITE FPDMA QUEUED 61 03 80 00 18 00 01 c2 ff 74 00 40 00 29d+09:24:50.857 WRITE FPDMA QUEUED 61 05 00 00 10 00 01 c2 ff 6f 00 40 00 29d+09:24:50.846 WRITE FPDMA QUEUED 61 05 80 00 08 00 01 c2 ff 69 80 40 00 29d+09:24:50.840 WRITE FPDMA QUEUED 61 01 80 00 00 00 01 c2 ff 68 00 40 00 29d+09:24:50.831 WRITE FPDMA QUEUED Error 44 [43] occurred at disk power-on lifetime: 1422 hours (59 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 41 00 08 00 01 c2 4d 16 7f 40 00 Error: ICRC, ABRT at LBA = 0x1c24d167f = 7554799231 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 04 80 00 18 00 01 c2 4d 17 80 40 00 29d+09:23:42.947 WRITE FPDMA QUEUED 61 01 00 00 10 00 01 c2 4d 16 80 40 00 29d+09:23:42.939 WRITE FPDMA QUEUED 61 05 00 00 08 00 01 c2 4d 11 80 40 00 29d+09:23:42.939 WRITE FPDMA QUEUED 61 05 00 00 00 00 01 c2 4d 0c 80 40 00 29d+09:23:42.931 WRITE FPDMA QUEUED 61 04 80 00 f0 00 01 c2 4d 08 00 40 00 29d+09:23:42.924 WRITE FPDMA QUEUED Error 43 [42] occurred at disk power-on lifetime: 1421 hours (59 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 41 00 48 00 01 9e a0 4d ff 40 00 Error: ICRC, ABRT at LBA = 0x19ea04dff = 6956273151 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 02 00 00 58 00 01 9e a0 53 00 40 00 29d+08:25:43.325 WRITE FPDMA QUEUED 61 05 00 00 50 00 01 9e a0 4e 00 40 00 29d+08:25:43.325 WRITE FPDMA QUEUED 61 03 80 00 48 00 01 9e a0 4a 80 40 00 29d+08:25:43.317 WRITE FPDMA QUEUED 61 05 00 00 40 00 01 9e a0 45 80 40 00 29d+08:25:43.311 WRITE FPDMA QUEUED 61 02 00 00 38 00 01 9e a0 43 80 40 00 29d+08:25:43.306 WRITE FPDMA QUEUED Error 42 [41] occurred at disk power-on lifetime: 1421 hours (59 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 41 00 18 00 01 90 0e b9 7f 40 00 Error: ICRC, ABRT at LBA = 0x1900eb97f = 6711851391 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 05 00 00 28 00 01 90 0e ba 80 40 00 29d+08:02:34.700 WRITE FPDMA QUEUED 61 01 00 00 20 00 01 90 0e b9 80 40 00 29d+08:02:34.695 WRITE FPDMA QUEUED 61 05 00 00 18 00 01 90 0e b4 80 40 00 29d+08:02:34.695 WRITE FPDMA QUEUED 61 04 80 00 10 00 01 90 0e b0 00 40 00 29d+08:02:34.688 WRITE FPDMA QUEUED 61 05 00 00 08 00 01 90 0e ab 00 40 00 29d+08:02:34.681 WRITE FPDMA QUEUED Error 41 [40] occurred at disk power-on lifetime: 1420 hours (59 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 41 00 70 00 01 81 68 c3 ff 40 00 Error: ICRC, ABRT at LBA = 0x18168c3ff = 6466094079 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 01 00 00 80 00 01 81 68 c9 00 40 00 29d+07:40:17.836 WRITE FPDMA QUEUED 61 05 00 00 78 00 01 81 68 c4 00 40 00 29d+07:40:17.836 WRITE FPDMA QUEUED 61 05 00 00 70 00 01 81 68 bf 00 40 00 29d+07:40:17.829 WRITE FPDMA QUEUED 61 04 80 00 68 00 01 81 68 ba 80 40 00 29d+07:40:17.823 WRITE FPDMA QUEUED 61 01 00 00 60 00 01 81 68 b9 80 40 00 29d+07:40:17.817 WRITE FPDMA QUEUED Error 40 [39] occurred at disk power-on lifetime: 1420 hours (59 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 41 00 e8 00 01 80 9f df ff 40 00 Error: ICRC, ABRT at LBA = 0x1809fdfff = 6452928511 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 04 00 00 08 00 01 80 9f e2 00 40 00 29d+07:39:07.339 WRITE FPDMA QUEUED 61 01 00 00 00 00 01 80 9f e1 00 40 00 29d+07:39:07.334 WRITE FPDMA QUEUED 61 01 00 00 f0 00 01 80 9f e0 00 40 00 29d+07:39:07.334 WRITE FPDMA QUEUED 61 05 00 00 e8 00 01 80 9f db 00 40 00 29d+07:39:07.334 WRITE FPDMA QUEUED 61 04 80 00 e0 00 01 80 9f d6 80 40 00 29d+07:39:07.328 WRITE FPDMA QUEUED Error 39 [38] occurred at disk power-on lifetime: 1417 hours (59 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 41 00 28 00 00 db 71 a8 7f 40 00 Error: ICRC, ABRT at LBA = 0xdb71a87f = 3681659007 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 05 80 00 28 00 00 db 71 a3 00 40 00 29d+04:08:29.378 WRITE FPDMA QUEUED 61 04 00 00 20 00 00 db 71 9f 00 40 00 29d+04:08:29.373 WRITE FPDMA QUEUED 61 06 00 00 18 00 00 db 71 99 00 40 00 29d+04:08:29.373 WRITE FPDMA QUEUED 61 05 80 00 10 00 00 db 71 93 80 40 00 29d+04:08:29.365 WRITE FPDMA QUEUED 61 04 00 00 08 00 00 db 71 8f 80 40 00 29d+04:08:29.359 WRITE FPDMA QUEUED Error 38 [37] occurred at disk power-on lifetime: 1417 hours (59 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 41 00 40 00 00 db 0b 79 7f 40 00 Error: ICRC, ABRT at LBA = 0xdb0b797f = 3674962303 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 05 00 00 48 00 00 db 0b 79 80 40 00 29d+04:08:01.634 WRITE FPDMA QUEUED 61 05 00 00 40 00 00 db 0b 74 80 40 00 29d+04:08:01.630 WRITE FPDMA QUEUED 61 03 00 00 38 00 00 db 0b 71 80 40 00 29d+04:08:01.627 WRITE FPDMA QUEUED 61 02 80 00 30 00 00 db 0b 6f 00 40 00 29d+04:08:01.627 WRITE FPDMA QUEUED 61 05 00 00 28 00 00 db 0b 6a 00 40 00 29d+04:08:01.622 WRITE FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 878 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 38 Celsius Power Cycle Min/Max Temperature: 34/40 Celsius Lifetime Min/Max Temperature: 16/45 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/55 Celsius Min/Max Temperature Limit: 5/55 Celsius Temperature History Size (Index): 478 (260) Index Estimated Time Temperature Celsius 261 2023-05-06 23:18 39 ******************** ... ..( 46 skipped). .. ******************** 308 2023-05-07 00:05 39 ******************** 309 2023-05-07 00:06 38 ******************* 310 2023-05-07 00:07 39 ******************** ... ..(215 skipped). .. ******************** 48 2023-05-07 03:43 39 ******************** 49 2023-05-07 03:44 38 ******************* ... ..( 3 skipped). .. ******************* 53 2023-05-07 03:48 38 ******************* 54 2023-05-07 03:49 39 ******************** ... ..( 2 skipped). .. ******************** 57 2023-05-07 03:52 39 ******************** 58 2023-05-07 03:53 38 ******************* 59 2023-05-07 03:54 39 ******************** ... ..( 4 skipped). .. ******************** 64 2023-05-07 03:59 39 ******************** 65 2023-05-07 04:00 38 ******************* ... ..( 2 skipped). .. ******************* 68 2023-05-07 04:03 38 ******************* 69 2023-05-07 04:04 39 ******************** ... ..( 3 skipped). .. ******************** 73 2023-05-07 04:08 39 ******************** 74 2023-05-07 04:09 38 ******************* 75 2023-05-07 04:10 39 ******************** ... ..( 4 skipped). .. ******************** 80 2023-05-07 04:15 39 ******************** 81 2023-05-07 04:16 38 ******************* ... ..( 2 skipped). .. ******************* 84 2023-05-07 04:19 38 ******************* 85 2023-05-07 04:20 39 ******************** ... ..( 5 skipped). .. ******************** 91 2023-05-07 04:26 39 ******************** 92 2023-05-07 04:27 38 ******************* 93 2023-05-07 04:28 39 ******************** ... ..( 2 skipped). .. ******************** 96 2023-05-07 04:31 39 ******************** 97 2023-05-07 04:32 38 ******************* ... ..(162 skipped). .. ******************* 260 2023-05-07 07:15 38 ******************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 147 --- Lifetime Power-On Resets 0x01 0x010 4 10501 --- Power-on Hours 0x01 0x018 6 91973481965 --- Logical Sectors Written 0x01 0x020 6 74405505 --- Number of Write Commands 0x01 0x028 6 23802706900 --- Logical Sectors Read 0x01 0x030 6 1052806138 --- Number of Read Commands 0x02 ===== = = === == Free-Fall Statistics (rev 1) == 0x02 0x010 4 0 --- Overlimit Shock Events 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 10501 --- Spindle Motor Power-on Hours 0x03 0x010 4 2338 --- Head Flying Hours 0x03 0x018 4 379 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 48 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 38 --- Current Temperature 0x05 0x010 1 37 N-- Average Short Term Temperature 0x05 0x018 1 37 N-- Average Long Term Temperature 0x05 0x020 1 45 --- Highest Temperature 0x05 0x028 1 16 --- Lowest Temperature 0x05 0x030 1 42 N-- Highest Average Short Term Temperature 0x05 0x038 1 22 N-- Lowest Average Short Term Temperature 0x05 0x040 1 38 N-- Highest Average Long Term Temperature 0x05 0x048 1 23 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 55 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 5 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 32024 --- Number of Hardware Resets 0x06 0x018 4 45 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 17 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0008 4 0 Device-to-host non-data FIS retries 0x000a 4 37 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS /dev/sdc smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.3.1-arch1-1] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: MG04ACA600E Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: FS3J User Capacity: 6,001,175,126,016 bytes [6.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database 7.3/5319 ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun May 7 07:15:55 2023 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 647) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 2 Throughput_Performance P-S--- 100 100 050 - 0 3 Spin_Up_Time POS--K 100 100 001 - 8289 4 Start_Stop_Count -O--CK 100 100 000 - 112 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 8 Seek_Time_Performance P-S--- 100 100 050 - 0 9 Power_On_Hours -O--CK 072 072 000 - 11250 10 Spin_Retry_Count PO--CK 102 100 030 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 112 191 G-Sense_Error_Rate -O--CK 100 100 000 - 1 192 Power-Off_Retract_Count -O--CK 100 100 000 - 55 193 Load_Cycle_Count -O--CK 100 100 000 - 712 194 Temperature_Celsius -O---K 100 100 000 - 42 (Min/Max 14/49) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 0 220 Disk_Shift -O---- 100 100 000 - 0 222 Loaded_Hours -O--CK 095 095 000 - 2377 223 Load_Retry_Count -O--CK 100 100 000 - 0 224 Load_Friction -O---K 100 100 000 - 0 226 Load-in_Time -OS--K 100 100 000 - 625 240 Head_Flying_Hours P----- 100 100 001 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x0c GPL R/O 2048 Pending Defects log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 12288 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa7 GPL VS 8 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 42 Celsius Power Cycle Min/Max Temperature: 38/46 Celsius Lifetime Min/Max Temperature: 14/49 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/55 Celsius Min/Max Temperature Limit: 5/55 Celsius Temperature History Size (Index): 478 (354) Index Estimated Time Temperature Celsius 355 2023-05-06 23:18 44 ************************* ... ..( 70 skipped). .. ************************* 426 2023-05-07 00:29 44 ************************* 427 2023-05-07 00:30 43 ************************ ... ..(172 skipped). .. ************************ 122 2023-05-07 03:23 43 ************************ 123 2023-05-07 03:24 42 *********************** ... ..(230 skipped). .. *********************** 354 2023-05-07 07:15 42 *********************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 112 --- Lifetime Power-On Resets 0x01 0x010 4 11250 --- Power-on Hours 0x01 0x018 6 33674658469 --- Logical Sectors Written 0x01 0x020 6 27466739 --- Number of Write Commands 0x01 0x028 6 105493379960 --- Logical Sectors Read 0x01 0x030 6 337061483 --- Number of Read Commands 0x02 ===== = = === == Free-Fall Statistics (rev 1) == 0x02 0x010 4 1 --- Overlimit Shock Events 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 11249 --- Spindle Motor Power-on Hours 0x03 0x010 4 2377 --- Head Flying Hours 0x03 0x018 4 712 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 112 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 42 --- Current Temperature 0x05 0x010 1 42 N-- Average Short Term Temperature 0x05 0x018 1 42 N-- Average Long Term Temperature 0x05 0x020 1 49 --- Highest Temperature 0x05 0x028 1 14 --- Lowest Temperature 0x05 0x030 1 46 N-- Highest Average Short Term Temperature 0x05 0x038 1 21 N-- Lowest Average Short Term Temperature 0x05 0x040 1 42 N-- Highest Average Long Term Temperature 0x05 0x048 1 22 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 55 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 5 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 10304 --- Number of Hardware Resets 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) No Defects Logged SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 39 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 36 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdd smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.3.1-arch1-1] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: HGST Ultrastar 7K6000 Device Model: HGST HUS726040ALA614 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: A5GNWD05 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun May 7 07:15:57 2023 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 113) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 571) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 137 137 054 - 104 3 Spin_Up_Time POS--- 152 152 024 - 409 (Average 291) 4 Start_Stop_Count -O--C- 100 100 000 - 648 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 140 140 020 - 15 9 Power_On_Hours -O--C- 095 095 000 - 38448 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 647 192 Power-Off_Retract_Count -O--CK 094 094 000 - 7364 193 Load_Cycle_Count -O--C- 094 094 000 - 7364 194 Temperature_Celsius -O---- 146 146 000 - 41 (Min/Max 17/56) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x12 GPL R/O 1 SATA NCQ Non-Data log 0x15 GPL R/W 1 Rebuild Assist log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 256 Current Device Internal Status Data log 0x25 GPL R/O 256 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 27348 - # 2 Short offline Completed without error 00% 27339 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 41 Celsius Power Cycle Min/Max Temperature: 34/44 Celsius Lifetime Min/Max Temperature: 17/56 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (98) Index Estimated Time Temperature Celsius 99 2023-05-07 05:08 41 ********************** 100 2023-05-07 05:09 42 *********************** ... ..( 10 skipped). .. *********************** 111 2023-05-07 05:20 42 *********************** 112 2023-05-07 05:21 41 ********************** ... ..( 5 skipped). .. ********************** 118 2023-05-07 05:27 41 ********************** 119 2023-05-07 05:28 42 *********************** ... ..( 8 skipped). .. *********************** 0 2023-05-07 05:37 42 *********************** 1 2023-05-07 05:38 41 ********************** ... ..( 6 skipped). .. ********************** 8 2023-05-07 05:45 41 ********************** 9 2023-05-07 05:46 42 *********************** ... ..( 6 skipped). .. *********************** 16 2023-05-07 05:53 42 *********************** 17 2023-05-07 05:54 41 ********************** ... ..( 4 skipped). .. ********************** 22 2023-05-07 05:59 41 ********************** 23 2023-05-07 06:00 42 *********************** ... ..( 8 skipped). .. *********************** 32 2023-05-07 06:09 42 *********************** 33 2023-05-07 06:10 41 ********************** ... ..( 3 skipped). .. ********************** 37 2023-05-07 06:14 41 ********************** 38 2023-05-07 06:15 42 *********************** ... ..( 9 skipped). .. *********************** 48 2023-05-07 06:25 42 *********************** 49 2023-05-07 06:26 41 ********************** ... ..( 6 skipped). .. ********************** 56 2023-05-07 06:33 41 ********************** 57 2023-05-07 06:34 42 *********************** ... ..( 5 skipped). .. *********************** 63 2023-05-07 06:40 42 *********************** 64 2023-05-07 06:41 41 ********************** ... ..( 7 skipped). .. ********************** 72 2023-05-07 06:49 41 ********************** 73 2023-05-07 06:50 42 *********************** ... ..( 5 skipped). .. *********************** 79 2023-05-07 06:56 42 *********************** 80 2023-05-07 06:57 41 ********************** ... ..( 17 skipped). .. ********************** 98 2023-05-07 07:15 41 ********************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 647 --- Lifetime Power-On Resets 0x01 0x018 6 92339627263 --- Logical Sectors Written 0x01 0x020 6 426923630 --- Number of Write Commands 0x01 0x028 6 55033095881 --- Logical Sectors Read 0x01 0x030 6 189688601 --- Number of Read Commands 0x01 0x038 6 138416149950 --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 11667 --- Spindle Motor Power-on Hours 0x03 0x010 4 11667 --- Head Flying Hours 0x03 0x018 4 7364 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 61 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 41 --- Current Temperature 0x05 0x010 1 41 N-- Average Short Term Temperature 0x05 0x018 1 38 N-- Average Long Term Temperature 0x05 0x020 1 56 --- Highest Temperature 0x05 0x028 1 17 --- Lowest Temperature 0x05 0x030 1 53 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 46 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 34 --- Number of Hardware Resets 0x06 0x010 4 1930 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 41 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 28 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS