/dev/nvme0n1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.15.75-generic-1rosa2021.1-x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Samsung SSD 980 500GB Serial Number: -- Firmware Version: 1B4QFXO7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 500,107,862,016 [500 GB] Unallocated NVM Capacity: 0 Controller ID: 5 NVMe Version: 1.4 Number of Namespaces: 1 Namespace 1 Size/Capacity: 500,107,862,016 [500 GB] Namespace 1 Utilization: 92,591,910,912 [92.5 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 ... Local Time is: Sun Nov 6 18:47:41 2022 MSK Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x0055): Comp DS_Mngmt Sav/Sel_Feat Timestmp Log Page Attributes (0x0f): S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 82 Celsius Critical Comp. Temp. Threshold: 85 Celsius Namespace 1 Features (0x10): NP_Fields Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 5.24W - - 0 0 0 0 0 0 1 + 4.49W - - 1 1 1 1 0 0 2 + 2.19W - - 2 2 2 2 0 500 3 - 0.0500W - - 3 3 3 3 210 1200 4 - 0.0050W - - 4 4 4 4 1000 9000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 34 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 1% Data Units Read: 11,639,522 [5.95 TB] Data Units Written: 9,978,305 [5.10 TB] Host Read Commands: 70,872,151 Host Write Commands: 67,240,579 Controller Busy Time: 209 Power Cycles: 586 Power On Hours: 327 Unsafe Shutdowns: 53 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 70 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 34 Celsius Temperature Sensor 2: 43 Celsius Thermal Temp. 2 Transition Count: 4361 Thermal Temp. 2 Total Time: 3431 Error Information (NVMe Log 0x01, 16 of 64 entries) No Errors Logged /dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.15.75-generic-1rosa2021.1-x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Momentus 7200.5 Device Model: ST9750420AS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: 0002SDM1 User Capacity: 750,156,374,016 bytes [750 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sun Nov 6 18:47:41 2022 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 140) minutes. Conveyance self-test routine recommended polling time: ( 3) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 114 099 006 - 71341808 3 Spin_Up_Time PO---- 097 097 085 - 0 4 Start_Stop_Count -O--CK 085 085 020 - 15823 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 080 060 030 - 102898211 9 Power_On_Hours -O--CK 073 073 000 - 24307 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 094 094 020 - 6533 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 099 000 - 8590065666 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 073 047 045 - 27 (Min/Max 20/30) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 6 192 Power-Off_Retract_Count -O--CK 100 100 000 - 1454 193 Load_Cycle_Count -O--CK 001 001 000 - 420193 194 Temperature_Celsius -O---K 027 053 000 - 27 (0 6 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 114 099 000 - 71341808 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 15517 (141 95 0) 241 Total_LBAs_Written ------ 100 253 000 - 417271337 242 Total_LBAs_Read ------ 100 253 000 - 2333534865 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 65 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xae GPL VS 1 Device vendor specific log 0xb0 GPL VS 2864 Device vendor specific log 0xbd GPL VS 252 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 27 Celsius Power Cycle Min/Max Temperature: 20/30 Celsius Lifetime Min/Max Temperature: 6/53 Celsius Specified Max Operating Temperature: 35 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 30 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (3) Index Estimated Time Temperature Celsius 4 2022-11-04 03:00 28 ********* 5 2022-11-04 03:30 ? - 6 2022-11-04 04:00 20 * 7 2022-11-04 04:30 29 ********** 8 2022-11-04 05:00 ? - 9 2022-11-04 05:30 20 * 10 2022-11-04 06:00 25 ****** 11 2022-11-04 06:30 24 ***** 12 2022-11-04 07:00 24 ***** 13 2022-11-04 07:30 26 ******* 14 2022-11-04 08:00 26 ******* 15 2022-11-04 08:30 27 ******** 16 2022-11-04 09:00 27 ******** 17 2022-11-04 09:30 29 ********** 18 2022-11-04 10:00 27 ******** 19 2022-11-04 10:30 26 ******* 20 2022-11-04 11:00 28 ********* 21 2022-11-04 11:30 30 *********** ... ..( 2 skipped). .. *********** 24 2022-11-04 13:00 30 *********** 25 2022-11-04 13:30 29 ********** 26 2022-11-04 14:00 30 *********** 27 2022-11-04 14:30 29 ********** 28 2022-11-04 15:00 29 ********** 29 2022-11-04 15:30 ? - 30 2022-11-04 16:00 20 * 31 2022-11-04 16:30 26 ******* 32 2022-11-04 17:00 28 ********* 33 2022-11-04 17:30 27 ******** 34 2022-11-04 18:00 25 ****** 35 2022-11-04 18:30 25 ****** 36 2022-11-04 19:00 26 ******* 37 2022-11-04 19:30 25 ****** 38 2022-11-04 20:00 25 ****** 39 2022-11-04 20:30 ? - 40 2022-11-04 21:00 21 ** 41 2022-11-04 21:30 ? - 42 2022-11-04 22:00 20 * 43 2022-11-04 22:30 26 ******* 44 2022-11-04 23:00 24 ***** 45 2022-11-04 23:30 23 **** 46 2022-11-05 00:00 25 ****** 47 2022-11-05 00:30 26 ******* 48 2022-11-05 01:00 25 ****** 49 2022-11-05 01:30 26 ******* 50 2022-11-05 02:00 22 *** 51 2022-11-05 02:30 22 *** 52 2022-11-05 03:00 22 *** 53 2022-11-05 03:30 28 ********* 54 2022-11-05 04:00 22 *** 55 2022-11-05 04:30 21 ** 56 2022-11-05 05:00 26 ******* 57 2022-11-05 05:30 ? - 58 2022-11-05 06:00 21 ** 59 2022-11-05 06:30 25 ****** 60 2022-11-05 07:00 26 ******* 61 2022-11-05 07:30 28 ********* 62 2022-11-05 08:00 27 ******** 63 2022-11-05 08:30 27 ******** 64 2022-11-05 09:00 26 ******* 65 2022-11-05 09:30 ? - 66 2022-11-05 10:00 20 * 67 2022-11-05 10:30 ? - 68 2022-11-05 11:00 21 ** 69 2022-11-05 11:30 ? - 70 2022-11-05 12:00 25 ****** 71 2022-11-05 12:30 26 ******* 72 2022-11-05 13:00 25 ****** 73 2022-11-05 13:30 26 ******* 74 2022-11-05 14:00 30 *********** 75 2022-11-05 14:30 26 ******* 76 2022-11-05 15:00 28 ********* 77 2022-11-05 15:30 ? - 78 2022-11-05 16:00 19 - 79 2022-11-05 16:30 ? - 80 2022-11-05 17:00 21 ** 81 2022-11-05 17:30 ? - 82 2022-11-05 18:00 25 ****** 83 2022-11-05 18:30 ? - 84 2022-11-05 19:00 21 ** 85 2022-11-05 19:30 31 ************ 86 2022-11-05 20:00 29 ********** 87 2022-11-05 20:30 25 ****** 88 2022-11-05 21:00 ? - 89 2022-11-05 21:30 20 * 90 2022-11-05 22:00 ? - 91 2022-11-05 22:30 19 - 92 2022-11-05 23:00 ? - 93 2022-11-05 23:30 21 ** 94 2022-11-06 00:00 25 ****** 95 2022-11-06 00:30 25 ****** 96 2022-11-06 01:00 ? - 97 2022-11-06 01:30 26 ******* 98 2022-11-06 02:00 ? - 99 2022-11-06 02:30 26 ******* 100 2022-11-06 03:00 26 ******* 101 2022-11-06 03:30 26 ******* 102 2022-11-06 04:00 25 ****** 103 2022-11-06 04:30 ? - 104 2022-11-06 05:00 26 ******* 105 2022-11-06 05:30 ? - 106 2022-11-06 06:00 26 ******* 107 2022-11-06 06:30 ? - 108 2022-11-06 07:00 26 ******* ... ..( 2 skipped). .. ******* 111 2022-11-06 08:30 26 ******* 112 2022-11-06 09:00 29 ********** 113 2022-11-06 09:30 26 ******* 114 2022-11-06 10:00 28 ********* 115 2022-11-06 10:30 27 ******** 116 2022-11-06 11:00 ? - 117 2022-11-06 11:30 19 - 118 2022-11-06 12:00 24 ***** 119 2022-11-06 12:30 23 **** 120 2022-11-06 13:00 28 ********* 121 2022-11-06 13:30 ? - 122 2022-11-06 14:00 22 *** 123 2022-11-06 14:30 30 *********** 124 2022-11-06 15:00 26 ******* 125 2022-11-06 15:30 ? - 126 2022-11-06 16:00 20 * 127 2022-11-06 16:30 26 ******* 0 2022-11-06 17:00 25 ****** 1 2022-11-06 17:30 25 ****** 2 2022-11-06 18:00 30 *********** 3 2022-11-06 18:30 30 *********** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 11 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.15.75-generic-1rosa2021.1-x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba 3.5" DT01ACA... Desktop HDD Device Model: TOSHIBA DT01ACA300 Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: MX6OABB0 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Nov 6 18:47:42 2022 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (22508) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 376) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 139 139 054 - 72 3 Spin_Up_Time POS--- 150 150 024 - 430 (Average 335) 4 Start_Stop_Count -O--C- 099 099 000 - 4649 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 124 124 020 - 33 9 Power_On_Hours -O--C- 098 098 000 - 14827 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 3118 192 Power-Off_Retract_Count -O--CK 096 096 000 - 4848 193 Load_Cycle_Count -O--C- 096 096 000 - 4848 194 Temperature_Celsius -O---- 181 181 000 - 33 (Min/Max 13/49) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 148 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 148 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 148 [3] occurred at disk power-on lifetime: 13506 hours (562 days + 18 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:16:09.112 IDENTIFY DEVICE b0 00 d8 00 01 00 00 00 c2 4f 01 a0 00 00:16:08.933 SMART ENABLE OPERATIONS ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:15:40.806 IDENTIFY DEVICE ef 00 90 00 03 00 00 00 00 00 00 a0 00 00:15:35.325 SET FEATURES [Disable SATA feature] ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:15:35.325 SET FEATURES [Enable write cache] Error 147 [2] occurred at disk power-on lifetime: 13506 hours (562 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 01 5d 50 a3 af 0d 00 Error: ICRC, ABRT at LBA = 0x15d50a3af = 5860533167 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 a8 00 01 5d 50 a3 af 40 00 00:15:23.721 READ FPDMA QUEUED ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:15:23.239 SET FEATURES [Enable write cache] ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:15:23.238 SET FEATURES [Enable write cache] 2f 00 00 00 01 00 00 00 00 00 01 a0 ff 00:15:23.211 READ LOG EXT 2f 00 00 00 01 00 00 00 00 00 10 e0 ff 00:15:23.209 READ LOG EXT Error 146 [1] occurred at disk power-on lifetime: 13506 hours (562 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 11 00 00 00 00 00 11 00 00 Error: ICRC, ABRT at LBA = 0x00000011 = 17 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 20 00 a0 00 00 00 00 00 02 40 00 00:15:23.207 READ FPDMA QUEUED ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:15:22.227 SET FEATURES [Enable write cache] ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:15:22.227 SET FEATURES [Enable write cache] 2f 00 00 00 01 00 00 00 00 00 01 a0 ff 00:15:22.206 READ LOG EXT 2f 00 00 00 01 00 00 00 00 00 10 e0 ff 00:15:22.205 READ LOG EXT Error 145 [0] occurred at disk power-on lifetime: 13506 hours (562 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 11 00 00 00 00 00 11 00 00 Error: ICRC, ABRT at LBA = 0x00000011 = 17 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 20 00 98 00 00 00 00 00 02 40 00 00:15:22.196 READ FPDMA QUEUED ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:15:21.216 SET FEATURES [Enable write cache] ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:15:21.216 SET FEATURES [Enable write cache] 2f 00 00 00 01 00 00 00 00 00 01 a0 ff 00:15:21.194 READ LOG EXT 2f 00 00 00 01 00 00 00 00 00 10 e0 ff 00:15:21.192 READ LOG EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 22/37 Celsius Lifetime Min/Max Temperature: 13/49 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (91) Index Estimated Time Temperature Celsius 92 2022-11-06 16:40 31 ************ ... ..( 7 skipped). .. ************ 100 2022-11-06 16:48 31 ************ 101 2022-11-06 16:49 32 ************* ... ..( 5 skipped). .. ************* 107 2022-11-06 16:55 32 ************* 108 2022-11-06 16:56 33 ************** 109 2022-11-06 16:57 33 ************** 110 2022-11-06 16:58 32 ************* ... ..( 12 skipped). .. ************* 123 2022-11-06 17:11 32 ************* 124 2022-11-06 17:12 33 ************** ... ..( 17 skipped). .. ************** 14 2022-11-06 17:30 33 ************** 15 2022-11-06 17:31 34 *************** ... ..( 3 skipped). .. *************** 19 2022-11-06 17:35 34 *************** 20 2022-11-06 17:36 35 **************** ... ..( 5 skipped). .. **************** 26 2022-11-06 17:42 35 **************** 27 2022-11-06 17:43 34 *************** 28 2022-11-06 17:44 34 *************** 29 2022-11-06 17:45 34 *************** 30 2022-11-06 17:46 33 ************** ... ..( 8 skipped). .. ************** 39 2022-11-06 17:55 33 ************** 40 2022-11-06 17:56 34 *************** 41 2022-11-06 17:57 34 *************** 42 2022-11-06 17:58 34 *************** 43 2022-11-06 17:59 35 **************** ... ..( 4 skipped). .. **************** 48 2022-11-06 18:04 35 **************** 49 2022-11-06 18:05 36 ***************** ... ..( 8 skipped). .. ***************** 58 2022-11-06 18:14 36 ***************** 59 2022-11-06 18:15 37 ****************** 60 2022-11-06 18:16 36 ***************** 61 2022-11-06 18:17 36 ***************** 62 2022-11-06 18:18 36 ***************** 63 2022-11-06 18:19 35 **************** 64 2022-11-06 18:20 35 **************** 65 2022-11-06 18:21 34 *************** ... ..( 2 skipped). .. *************** 68 2022-11-06 18:24 34 *************** 69 2022-11-06 18:25 33 ************** 70 2022-11-06 18:26 33 ************** 71 2022-11-06 18:27 34 *************** ... ..( 10 skipped). .. *************** 82 2022-11-06 18:38 34 *************** 83 2022-11-06 18:39 33 ************** ... ..( 7 skipped). .. ************** 91 2022-11-06 18:47 33 ************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 3118 --- Lifetime Power-On Resets 0x01 0x010 4 14827 --- Power-on Hours 0x01 0x018 6 52664736588 --- Logical Sectors Written 0x01 0x020 6 107167371 --- Number of Write Commands 0x01 0x028 6 139118203611 --- Logical Sectors Read 0x01 0x030 6 541643068 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 13590 --- Spindle Motor Power-on Hours 0x03 0x010 4 13590 --- Head Flying Hours 0x03 0x018 4 4848 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 10 --- Read Recovery Attempts 0x03 0x030 4 7 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 1740 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 33 --- Current Temperature 0x05 0x010 1 31 N-- Average Short Term Temperature 0x05 0x018 1 30 N-- Average Long Term Temperature 0x05 0x020 1 49 --- Highest Temperature 0x05 0x028 1 13 --- Lowest Temperature 0x05 0x030 1 42 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 39 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 18778 --- Number of Hardware Resets 0x06 0x010 4 11248 --- Number of ASR Events 0x06 0x018 4 148 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 10 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS