/dev/sda smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.6.0-0.bpo.2-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital RE4 Device Model: WDC WD1003FBYX-01Y7B1 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01V02 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun May 2 12:25:03 2021 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (16500) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 162) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 83 3 Spin_Up_Time POS--K 192 172 021 - 3383 4 Start_Stop_Count -O--CK 096 096 000 - 4244 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 070 070 000 - 21943 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 096 096 000 - 4237 192 Power-Off_Retract_Count -O--CK 200 200 000 - 554 193 Load_Cycle_Count -O--CK 199 199 000 - 3689 194 Temperature_Celsius -O---K 113 095 000 - 34 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 9 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 96 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 96 [23] occurred at disk power-on lifetime: 2422 hours (100 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 00 ed 78 40 00 Error: UNC at LBA = 0x0000ed78 = 60792 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 d0 00 00 00 00 ed 77 40 08 00:18:15.726 READ FPDMA QUEUED 60 00 08 00 c8 00 00 00 00 ed 7f 40 08 00:18:15.725 READ FPDMA QUEUED 60 00 08 00 c0 00 00 00 00 ed 87 40 08 00:18:15.725 READ FPDMA QUEUED 60 00 08 00 b8 00 00 00 00 ed 8f 40 08 00:18:15.725 READ FPDMA QUEUED 60 00 08 00 b0 00 00 00 00 ed 97 40 08 00:18:15.725 READ FPDMA QUEUED Error 95 [22] occurred at disk power-on lifetime: 2422 hours (100 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 00 ed 78 40 00 Error: UNC at LBA = 0x0000ed78 = 60792 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 20 00 00 00 00 ed 97 40 08 00:18:13.938 READ FPDMA QUEUED 60 00 08 00 18 00 00 00 00 ed 8f 40 08 00:18:13.938 READ FPDMA QUEUED 60 00 08 00 10 00 00 00 00 ed 87 40 08 00:18:13.938 READ FPDMA QUEUED 60 00 08 00 08 00 00 00 00 ed 7f 40 08 00:18:13.937 READ FPDMA QUEUED 60 00 08 00 00 00 00 00 00 ed 77 40 08 00:18:13.937 READ FPDMA QUEUED Error 94 [21] occurred at disk power-on lifetime: 2422 hours (100 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 00 ed 78 40 00 Error: UNC at LBA = 0x0000ed78 = 60792 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 68 00 00 00 00 ed df 40 08 00:18:12.148 READ FPDMA QUEUED 60 00 08 00 60 00 00 00 00 ed e7 40 08 00:18:12.148 READ FPDMA QUEUED 60 00 08 00 58 00 00 00 00 ed ef 40 08 00:18:12.148 READ FPDMA QUEUED 60 00 08 00 50 00 00 00 00 ed f7 40 08 00:18:12.148 READ FPDMA QUEUED 60 00 08 00 48 00 00 00 00 ed ff 40 08 00:18:12.148 READ FPDMA QUEUED Error 93 [20] occurred at disk power-on lifetime: 2422 hours (100 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 00 ed 78 40 00 Error: UNC at LBA = 0x0000ed78 = 60792 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 b0 00 00 00 00 ed d7 40 08 00:18:10.359 READ FPDMA QUEUED 60 00 08 00 a8 00 00 00 00 ed cf 40 08 00:18:10.359 READ FPDMA QUEUED 60 00 08 00 a0 00 00 00 00 ed c7 40 08 00:18:10.359 READ FPDMA QUEUED 60 00 08 00 98 00 00 00 00 ed bf 40 08 00:18:10.359 READ FPDMA QUEUED 60 00 08 00 90 00 00 00 00 ed b7 40 08 00:18:10.359 READ FPDMA QUEUED Error 92 [19] occurred at disk power-on lifetime: 2422 hours (100 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 00 ed 78 40 00 Error: UNC at LBA = 0x0000ed78 = 60792 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 00 00 00 00 00 ed d7 40 08 00:18:08.577 READ FPDMA QUEUED 60 00 08 00 f0 00 00 00 00 ed df 40 08 00:18:08.577 READ FPDMA QUEUED 60 00 08 00 e8 00 00 00 00 ed e7 40 08 00:18:08.577 READ FPDMA QUEUED 60 00 08 00 e0 00 00 00 00 ed ef 40 08 00:18:08.577 READ FPDMA QUEUED 60 00 08 00 d8 00 00 00 00 ed f7 40 08 00:18:08.576 READ FPDMA QUEUED Error 91 [18] occurred at disk power-on lifetime: 2422 hours (100 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 00 ed 78 40 00 Error: UNC at LBA = 0x0000ed78 = 60792 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 48 00 00 00 00 ee 1f 40 08 00:18:06.798 READ FPDMA QUEUED 60 00 08 00 40 00 00 00 00 ee 17 40 08 00:18:06.798 READ FPDMA QUEUED 60 00 08 00 38 00 00 00 00 ee 0f 40 08 00:18:06.798 READ FPDMA QUEUED 60 00 08 00 30 00 00 00 00 ee 07 40 08 00:18:06.798 READ FPDMA QUEUED 60 00 08 00 28 00 00 00 00 ed ff 40 08 00:18:06.797 READ FPDMA QUEUED Error 90 [17] occurred at disk power-on lifetime: 2422 hours (100 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 00 f0 cc 40 00 Error: UNC at LBA = 0x0000f0cc = 61644 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 04 00 40 00 00 00 00 f0 cb 40 08 00:17:21.360 READ FPDMA QUEUED ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:17:21.353 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:17:21.353 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:17:21.351 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:17:21.351 SET FEATURES [Set transfer mode] Error 89 [16] occurred at disk power-on lifetime: 2422 hours (100 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 00 f0 cc 40 00 Error: UNC at LBA = 0x0000f0cc = 61644 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 04 00 38 00 00 00 00 f0 cb 40 08 00:17:19.595 READ FPDMA QUEUED ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:17:19.588 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:17:19.588 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:17:19.586 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:17:19.586 SET FEATURES [Set transfer mode] SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 3028 - # 2 Conveyance offline Completed without error 00% 2470 - # 3 Extended offline Completed: read failure 90% 2420 60792 # 4 Short offline Completed: read failure 90% 2420 60792 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 22/35 Celsius Lifetime Min/Max Temperature: 0/52 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (12) Index Estimated Time Temperature Celsius 13 2021-05-02 04:28 34 *************** ... ..( 14 skipped). .. *************** 28 2021-05-02 04:43 34 *************** 29 2021-05-02 04:44 35 **************** 30 2021-05-02 04:45 34 *************** ... ..( 3 skipped). .. *************** 34 2021-05-02 04:49 34 *************** 35 2021-05-02 04:50 35 **************** 36 2021-05-02 04:51 34 *************** 37 2021-05-02 04:52 35 **************** 38 2021-05-02 04:53 35 **************** 39 2021-05-02 04:54 34 *************** ... ..( 8 skipped). .. *************** 48 2021-05-02 05:03 34 *************** 49 2021-05-02 05:04 35 **************** 50 2021-05-02 05:05 35 **************** 51 2021-05-02 05:06 34 *************** 52 2021-05-02 05:07 35 **************** 53 2021-05-02 05:08 34 *************** ... ..( 2 skipped). .. *************** 56 2021-05-02 05:11 34 *************** 57 2021-05-02 05:12 36 ***************** 58 2021-05-02 05:13 35 **************** 59 2021-05-02 05:14 36 ***************** 60 2021-05-02 05:15 36 ***************** 61 2021-05-02 05:16 36 ***************** 62 2021-05-02 05:17 35 **************** 63 2021-05-02 05:18 36 ***************** 64 2021-05-02 05:19 36 ***************** 65 2021-05-02 05:20 35 **************** 66 2021-05-02 05:21 36 ***************** ... ..( 4 skipped). .. ***************** 71 2021-05-02 05:26 36 ***************** 72 2021-05-02 05:27 35 **************** ... ..( 2 skipped). .. **************** 75 2021-05-02 05:30 35 **************** 76 2021-05-02 05:31 36 ***************** ... ..( 4 skipped). .. ***************** 81 2021-05-02 05:36 36 ***************** 82 2021-05-02 05:37 35 **************** 83 2021-05-02 05:38 36 ***************** 84 2021-05-02 05:39 36 ***************** 85 2021-05-02 05:40 35 **************** 86 2021-05-02 05:41 35 **************** 87 2021-05-02 05:42 35 **************** 88 2021-05-02 05:43 36 ***************** 89 2021-05-02 05:44 35 **************** 90 2021-05-02 05:45 36 ***************** ... ..(113 skipped). .. ***************** 204 2021-05-02 07:39 36 ***************** 205 2021-05-02 07:40 35 **************** 206 2021-05-02 07:41 35 **************** 207 2021-05-02 07:42 35 **************** 208 2021-05-02 07:43 36 ***************** 209 2021-05-02 07:44 35 **************** 210 2021-05-02 07:45 35 **************** 211 2021-05-02 07:46 36 ***************** 212 2021-05-02 07:47 35 **************** 213 2021-05-02 07:48 35 **************** 214 2021-05-02 07:49 36 ***************** 215 2021-05-02 07:50 35 **************** 216 2021-05-02 07:51 36 ***************** 217 2021-05-02 07:52 36 ***************** 218 2021-05-02 07:53 35 **************** ... ..( 9 skipped). .. **************** 228 2021-05-02 08:03 35 **************** 229 2021-05-02 08:04 36 ***************** 230 2021-05-02 08:05 36 ***************** 231 2021-05-02 08:06 36 ***************** 232 2021-05-02 08:07 35 **************** 233 2021-05-02 08:08 35 **************** 234 2021-05-02 08:09 35 **************** 235 2021-05-02 08:10 36 ***************** 236 2021-05-02 08:11 36 ***************** 237 2021-05-02 08:12 35 **************** 238 2021-05-02 08:13 36 ***************** ... ..( 62 skipped). .. ***************** 301 2021-05-02 09:16 36 ***************** 302 2021-05-02 09:17 35 **************** 303 2021-05-02 09:18 36 ***************** ... ..( 27 skipped). .. ***************** 331 2021-05-02 09:46 36 ***************** 332 2021-05-02 09:47 35 **************** 333 2021-05-02 09:48 35 **************** 334 2021-05-02 09:49 35 **************** 335 2021-05-02 09:50 36 ***************** 336 2021-05-02 09:51 35 **************** 337 2021-05-02 09:52 36 ***************** 338 2021-05-02 09:53 35 **************** ... ..( 70 skipped). .. **************** 409 2021-05-02 11:04 35 **************** 410 2021-05-02 11:05 ? - 411 2021-05-02 11:06 22 *** 412 2021-05-02 11:07 25 ****** 413 2021-05-02 11:08 25 ****** 414 2021-05-02 11:09 26 ******* 415 2021-05-02 11:10 26 ******* 416 2021-05-02 11:11 27 ******** 417 2021-05-02 11:12 27 ******** 418 2021-05-02 11:13 27 ******** 419 2021-05-02 11:14 28 ********* 420 2021-05-02 11:15 28 ********* 421 2021-05-02 11:16 28 ********* 422 2021-05-02 11:17 29 ********** 423 2021-05-02 11:18 29 ********** 424 2021-05-02 11:19 30 *********** ... ..( 3 skipped). .. *********** 428 2021-05-02 11:23 30 *********** 429 2021-05-02 11:24 31 ************ ... ..( 3 skipped). .. ************ 433 2021-05-02 11:28 31 ************ 434 2021-05-02 11:29 32 ************* ... ..( 2 skipped). .. ************* 437 2021-05-02 11:32 32 ************* 438 2021-05-02 11:33 33 ************** ... ..( 20 skipped). .. ************** 459 2021-05-02 11:54 33 ************** 460 2021-05-02 11:55 34 *************** ... ..( 29 skipped). .. *************** 12 2021-05-02 12:25 34 *************** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 7561 Vendor specific /dev/sdb smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.6.0-0.bpo.2-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 850 PRO 256GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EXM04B6Q User Capacity: 256,060,514,304 bytes [256 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun May 2 12:25:03 2021 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 133) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 097 097 000 - 12258 12 Power_Cycle_Count -O--CK 097 097 000 - 2854 177 Wear_Leveling_Count PO--C- 099 099 000 - 5 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 073 058 000 - 27 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 099 099 000 - 6 235 POR_Recovery_Count -O--C- 099 099 000 - 452 241 Total_LBAs_Written -O--CK 099 099 000 - 1813868635 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 9360 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 26 Celsius Power Cycle Min/Max Temperature: ?/26 Celsius Lifetime Min/Max Temperature: 18/40 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (56) Index Estimated Time Temperature Celsius 57 2021-05-01 15:10 27 ******** ... ..( 21 skipped). .. ******** 79 2021-05-01 18:50 27 ******** 80 2021-05-01 19:00 ? - 81 2021-05-01 19:10 ? - 82 2021-05-01 19:20 26 ******* 83 2021-05-01 19:30 25 ****** 84 2021-05-01 19:40 26 ******* ... ..( 2 skipped). .. ******* 87 2021-05-01 20:10 26 ******* 88 2021-05-01 20:20 27 ******** 89 2021-05-01 20:30 26 ******* 90 2021-05-01 20:40 27 ******** ... ..( 16 skipped). .. ******** 107 2021-05-01 23:30 27 ******** 108 2021-05-01 23:40 28 ********* 109 2021-05-01 23:50 27 ******** ... ..( 18 skipped). .. ******** 0 2021-05-02 03:00 27 ******** 1 2021-05-02 03:10 28 ********* 2 2021-05-02 03:20 27 ******** ... ..( 39 skipped). .. ******** 42 2021-05-02 10:00 27 ******** 43 2021-05-02 10:10 ? - 44 2021-05-02 10:20 ? - 45 2021-05-02 10:30 26 ******* 46 2021-05-02 10:40 25 ****** 47 2021-05-02 10:50 26 ******* ... ..( 8 skipped). .. ******* 56 2021-05-02 12:20 26 ******* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 10 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 10 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdc smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.6.0-0.bpo.2-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Samsung SSD 860 PRO 512GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: RVM02B6Q User Capacity: 512,110,190,592 bytes [512 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun May 2 12:25:03 2021 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 099 099 000 - 1816 12 Power_Cycle_Count -O--CK 099 099 000 - 401 177 Wear_Leveling_Count PO--C- 099 099 000 - 1 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 075 066 000 - 25 195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 099 099 000 - 44 235 Unknown_Attribute -O--C- 099 099 000 - 14 241 Total_LBAs_Written -O--CK 099 099 000 - 1162667143 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce-0xcf SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 3 - # 2 Short offline Completed without error 00% 2 - # 3 Short offline Completed without error 00% 2 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 25 Celsius Power Cycle Min/Max Temperature: 23/40 Celsius Lifetime Min/Max Temperature: 18/40 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (95) Index Estimated Time Temperature Celsius 96 2021-05-01 15:10 25 ****** ... ..( 21 skipped). .. ****** 118 2021-05-01 18:50 25 ****** 119 2021-05-01 19:00 ? - 120 2021-05-01 19:10 ? - 121 2021-05-01 19:20 24 ***** 122 2021-05-01 19:30 24 ***** 123 2021-05-01 19:40 24 ***** 124 2021-05-01 19:50 28 ********* 125 2021-05-01 20:00 25 ****** ... ..( 9 skipped). .. ****** 7 2021-05-01 21:40 25 ****** 8 2021-05-01 21:50 26 ******* 9 2021-05-01 22:00 25 ****** ... ..( 2 skipped). .. ****** 12 2021-05-01 22:30 25 ****** 13 2021-05-01 22:40 26 ******* ... ..( 6 skipped). .. ******* 20 2021-05-01 23:50 26 ******* 21 2021-05-02 00:00 25 ****** ... ..( 3 skipped). .. ****** 25 2021-05-02 00:40 25 ****** 26 2021-05-02 00:50 26 ******* 27 2021-05-02 01:00 25 ****** 28 2021-05-02 01:10 26 ******* ... ..( 17 skipped). .. ******* 46 2021-05-02 04:10 26 ******* 47 2021-05-02 04:20 25 ****** 48 2021-05-02 04:30 26 ******* ... ..( 25 skipped). .. ******* 74 2021-05-02 08:50 26 ******* 75 2021-05-02 09:00 25 ****** ... ..( 5 skipped). .. ****** 81 2021-05-02 10:00 25 ****** 82 2021-05-02 10:10 ? - 83 2021-05-02 10:20 ? - 84 2021-05-02 10:30 23 **** 85 2021-05-02 10:40 24 ***** 86 2021-05-02 10:50 24 ***** 87 2021-05-02 11:00 24 ***** 88 2021-05-02 11:10 25 ****** ... ..( 6 skipped). .. ****** 95 2021-05-02 12:20 25 ****** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 401 --- Lifetime Power-On Resets 0x01 0x010 4 1816 --- Power-on Hours 0x01 0x018 6 1162667143 --- Logical Sectors Written 0x01 0x020 6 7443708 --- Number of Write Commands 0x01 0x028 6 695152151 --- Logical Sectors Read 0x01 0x030 6 10454791 --- Number of Read Commands 0x01 0x038 6 3590000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 25 --- Current Temperature 0x05 0x020 1 40 --- Highest Temperature 0x05 0x028 1 18 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 1100 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 44 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 10 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 10 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdd smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.6.0-0.bpo.2-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD2005FBYZ-01YCBB2 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: RR07 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun May 2 12:25:03 2021 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Disabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 215) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x203d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 191 179 021 - 3416 4 Start_Stop_Count -O--CK 099 099 000 - 1842 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 200 000 - 0 9 Power_On_Hours -O--CK 083 083 000 - 12639 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1840 16 Unknown_Attribute -O---K 001 199 000 - 68337295617 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 200 200 000 - 330 193 Load_Cycle_Count -O--CK 200 200 000 - 1517 194 Temperature_Celsius -O---K 116 107 000 - 31 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x0a GPL R/W 8 Device Statistics Notification 0x0c GPL R/O 113 Pending Defects log 0x0d GPL,SL R/O 8 LPS Mis-alignment log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x24 GPL R/O 192 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xb6 GPL,SL VS 16 Device vendor specific log 0xb7 GPL,SL VS 39 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 1 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 [0] occurred at disk power-on lifetime: 796 hours (33 days + 4 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 43 01 00 00 00 8c 84 29 40 40 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 3153 - # 2 Short offline Aborted by host 40% 3056 - # 3 Extended offline Interrupted (host reset) 40% 0 - # 4 Short offline Completed without error 00% 932 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 22/31 Celsius Lifetime Min/Max Temperature: 17/40 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (38) Index Estimated Time Temperature Celsius 39 2021-05-02 04:28 32 ************* ... ..(349 skipped). .. ************* 389 2021-05-02 10:18 32 ************* 390 2021-05-02 10:19 ? - 391 2021-05-02 10:20 22 *** 392 2021-05-02 10:21 22 *** 393 2021-05-02 10:22 22 *** 394 2021-05-02 10:23 23 **** 395 2021-05-02 10:24 23 **** 396 2021-05-02 10:25 24 ***** 397 2021-05-02 10:26 24 ***** 398 2021-05-02 10:27 25 ****** 399 2021-05-02 10:28 25 ****** 400 2021-05-02 10:29 26 ******* 401 2021-05-02 10:30 26 ******* 402 2021-05-02 10:31 26 ******* 403 2021-05-02 10:32 27 ******** ... ..( 2 skipped). .. ******** 406 2021-05-02 10:35 27 ******** 407 2021-05-02 10:36 28 ********* ... ..( 3 skipped). .. ********* 411 2021-05-02 10:40 28 ********* 412 2021-05-02 10:41 29 ********** ... ..( 4 skipped). .. ********** 417 2021-05-02 10:46 29 ********** 418 2021-05-02 10:47 30 *********** ... ..( 29 skipped). .. *********** 448 2021-05-02 11:17 30 *********** 449 2021-05-02 11:18 31 ************ ... ..( 66 skipped). .. ************ 38 2021-05-02 12:25 31 ************ SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1840 -D- Lifetime Power-On Resets 0x01 0x010 4 12639 -D- Power-on Hours 0x01 0x018 6 31867823231 -D- Logical Sectors Written 0x01 0x020 6 212214630 -D- Number of Write Commands 0x01 0x028 6 36469472386 -D- Logical Sectors Read 0x01 0x030 6 210334680 -D- Number of Read Commands 0x01 0x038 6 2550727040 -D- Date and Time TimeStamp 0x01 0x048 2 127 ND- Workload Utilization 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 12638 -D- Spindle Motor Power-on Hours 0x03 0x010 4 12637 -D- Head Flying Hours 0x03 0x018 4 1848 -D- Head Load Events 0x03 0x020 4 0 -D- Number of Reallocated Logical Sectors 0x03 0x028 4 0 -D- Read Recovery Attempts 0x03 0x030 4 0 -D- Number of Mechanical Start Failures 0x03 0x038 4 0 -D- Number of Realloc. Candidate Logical Sectors 0x03 0x040 4 330 -D- Number of High Priority Unload Events 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 -D- Number of Reported Uncorrectable Errors 0x04 0x010 4 2 -D- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 31 -D- Current Temperature 0x05 0x010 1 32 -D- Average Short Term Temperature 0x05 0x018 1 30 -D- Average Long Term Temperature 0x05 0x020 1 41 -D- Highest Temperature 0x05 0x028 1 18 -D- Lowest Temperature 0x05 0x030 1 38 -D- Highest Average Short Term Temperature 0x05 0x038 1 27 -D- Lowest Average Short Term Temperature 0x05 0x040 1 35 -D- Highest Average Long Term Temperature 0x05 0x048 1 28 -D- Lowest Average Long Term Temperature 0x05 0x050 4 0 -D- Time in Over-Temperature 0x05 0x058 1 60 -D- Specified Maximum Operating Temperature 0x05 0x060 4 0 -D- Time in Under-Temperature 0x05 0x068 1 0 -D- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 3644 -D- Number of Hardware Resets 0x06 0x010 4 3105 -D- Number of ASR Events 0x06 0x018 4 1 -D- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) supported [please try: '-l defects'] SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 8 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 0 Vendor specific /dev/sde smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.6.0-0.bpo.2-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD4003FRYZ-01F0DB0 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: 01.01H01 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun May 2 12:25:04 2021 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 87) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 485) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 130 130 054 - 100 3 Spin_Up_Time POS--- 158 158 024 - 235 (Average 302) 4 Start_Stop_Count -O--C- 100 100 000 - 684 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 128 128 020 - 18 9 Power_On_Hours -O--C- 100 100 000 - 6210 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 682 192 Power-Off_Retract_Count -O--CK 100 100 000 - 933 193 Load_Cycle_Count -O--C- 100 100 000 - 933 194 Temperature_Celsius -O---- 176 176 000 - 34 (Min/Max 18/42) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 256 Device Statistics log 0x04 SL R/O 255 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x0c GPL R/O 5501 Pending Defects log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x12 GPL R/O 1 SATA NCQ Non-Data log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x15 GPL R/W 1 Rebuild Assist log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 256 Current Device Internal Status Data log 0x25 GPL R/O 256 Saved Device Internal Status Data log 0x2f GPL - 1 Set Sector Configuration 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 10 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 0 Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 21/35 Celsius Lifetime Min/Max Temperature: 18/42 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (99) Index Estimated Time Temperature Celsius 100 2021-05-02 10:18 21 ** 101 2021-05-02 10:19 22 *** 102 2021-05-02 10:20 22 *** 103 2021-05-02 10:21 23 **** 104 2021-05-02 10:22 24 ***** 105 2021-05-02 10:23 24 ***** 106 2021-05-02 10:24 25 ****** 107 2021-05-02 10:25 25 ****** 108 2021-05-02 10:26 26 ******* 109 2021-05-02 10:27 26 ******* 110 2021-05-02 10:28 27 ******** 111 2021-05-02 10:29 27 ******** 112 2021-05-02 10:30 28 ********* 113 2021-05-02 10:31 28 ********* 114 2021-05-02 10:32 28 ********* 115 2021-05-02 10:33 29 ********** 116 2021-05-02 10:34 29 ********** 117 2021-05-02 10:35 29 ********** 118 2021-05-02 10:36 30 *********** ... ..( 3 skipped). .. *********** 122 2021-05-02 10:40 30 *********** 123 2021-05-02 10:41 31 ************ ... ..( 4 skipped). .. ************ 0 2021-05-02 10:46 31 ************ 1 2021-05-02 10:47 32 ************* ... ..( 6 skipped). .. ************* 8 2021-05-02 10:54 32 ************* 9 2021-05-02 10:55 33 ************** ... ..( 13 skipped). .. ************** 23 2021-05-02 11:09 33 ************** 24 2021-05-02 11:10 34 *************** ... ..( 73 skipped). .. *************** 98 2021-05-02 12:24 34 *************** 99 2021-05-02 12:25 35 **************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) supported [please try: '-l defects'] SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 10 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 8 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sg6 smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.6.0-0.bpo.2-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: Marvell Product: Console Revision: 1.01 scsiModePageOffset: response length too short, resp_len=4 offset=54 bd_len=50 >> Terminate command early due to bad response to IEC mode page A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.