/dev/nvme0n1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.17.1-arch1-1] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Samsung SSD 950 PRO 256GB Serial Number: -- Firmware Version: 1B0QBXX7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Controller ID: 1 NVMe Version: <1.2 Number of Namespaces: 1 Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] Namespace 1 Utilization: 159,757,115,392 [159 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 ... Local Time is: Thu Apr 14 15:32:02 2022 BST Firmware Updates (0x06): 3 Slots Optional Admin Commands (0x0007): Security Format Frmw_DL Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Log Page Attributes (0x01): S/H_per_NS Maximum Data Transfer Size: 32 Pages Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.50W - - 0 0 0 0 5 5 1 + 5.80W - - 1 1 1 1 30 30 2 + 3.60W - - 2 2 2 2 100 100 3 - 0.0700W - - 3 3 3 3 500 5000 4 - 0.0050W - - 4 4 4 4 2000 22000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 54 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 10% Data Units Read: 108,319,157 [55.4 TB] Data Units Written: 198,213,215 [101 TB] Host Read Commands: 1,124,117,262 Host Write Commands: 2,281,307,689 Controller Busy Time: 10,067 Power Cycles: 961 Power On Hours: 47,942 Unsafe Shutdowns: 771 Media and Data Integrity Errors: 0 Error Information Log Entries: 946 Error Information (NVMe Log 0x01, 16 of 64 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS 0 946 0 0x1014 0x4004 0x000 0 0 - 1 945 0 0x0015 0x4004 0x000 0 0 - 2 944 1 - 0x0000 0x000 0 0 - 3 943 0 0x2014 0x4004 0x000 0 0 - 4 942 0 0x1015 0x4004 0x000 0 0 - 5 941 1 - 0x0000 0x000 0 0 - 6 940 0 0x2008 0x4004 0x000 0 0 - 7 939 0 0x1009 0x4004 0x000 0 0 - 8 938 1 - 0x0000 0x000 0 0 - 9 937 0 0x2004 0x4004 0x000 0 0 - 10 936 0 0x1005 0x4004 0x000 0 0 - 11 935 1 - 0x0000 0x000 0 0 - 12 934 0 0x2010 0x4004 0x000 0 0 - 13 933 0 0x1011 0x4004 0x000 0 0 - 14 932 1 - 0x0000 0x000 0 0 - 15 931 0 0x2000 0x4004 0x000 0 0 - ... (48 entries not read) /dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.17.1-arch1-1] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD6003FZBX-00K5WB0 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: 01.01A01 User Capacity: 6,001,175,126,016 bytes [6.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database 7.3/5319 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Apr 14 15:32:02 2022 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 87) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 673) minutes. SCT capabilities: (0x0035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance --S--- 132 132 054 - 96 3 Spin_Up_Time POS--- 193 193 024 - 318 (Average 306) 4 Start_Stop_Count -O--C- 100 100 000 - 303 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate -O-R-- 100 100 067 - 0 8 Seek_Time_Performance --S--- 128 128 020 - 18 9 Power_On_Hours -O--C- 096 096 000 - 31398 10 Spin_Retry_Count -O--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 303 192 Power-Off_Retract_Count -O--CK 099 099 000 - 1542 193 Load_Cycle_Count -O--C- 099 099 000 - 1542 194 Temperature_Celsius -O---- 137 137 000 - 40 (Min/Max 12/67) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 256 Device Statistics log 0x04 SL R/O 255 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x0c GPL R/O 5501 Pending Defects log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x12 GPL R/O 1 SATA NCQ Non-Data log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x15 GPL R/W 1 Rebuild Assist log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 256 Current Device Internal Status Data log 0x25 GPL R/O 256 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 40 Celsius Power Cycle Min/Max Temperature: 30/47 Celsius Lifetime Min/Max Temperature: 12/67 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/55 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (117) Index Estimated Time Temperature Celsius 118 2022-04-14 13:25 41 ********************** ... ..( 96 skipped). .. ********************** 87 2022-04-14 15:02 41 ********************** 88 2022-04-14 15:03 40 ********************* 89 2022-04-14 15:04 41 ********************** ... ..( 3 skipped). .. ********************** 93 2022-04-14 15:08 41 ********************** 94 2022-04-14 15:09 40 ********************* ... ..( 21 skipped). .. ********************* 116 2022-04-14 15:31 40 ********************* 117 2022-04-14 15:32 41 ********************** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 303 --- Lifetime Power-On Resets 0x01 0x010 4 31398 --- Power-on Hours 0x01 0x018 6 64845020690 --- Logical Sectors Written 0x01 0x020 6 150614313 --- Number of Write Commands 0x01 0x028 6 126804623877 --- Logical Sectors Read 0x01 0x030 6 516668938 --- Number of Read Commands 0x01 0x038 6 113036367200 --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 31294 --- Spindle Motor Power-on Hours 0x03 0x010 4 31294 --- Head Flying Hours 0x03 0x018 4 1542 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 2 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 40 --- Current Temperature 0x05 0x010 1 39 N-- Average Short Term Temperature 0x05 0x018 1 37 N-- Average Long Term Temperature 0x05 0x020 1 67 --- Highest Temperature 0x05 0x028 1 12 --- Lowest Temperature 0x05 0x030 1 63 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 58 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 72244 --- Time in Over-Temperature 0x05 0x058 1 55 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 7 --- Number of Hardware Resets 0x06 0x010 4 459 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0xff ===== = = === == Vendor Specific Statistics (rev 1) == |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) No Defects Logged SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 7 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.17.1-arch1-1] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD6002FZWX-00GBGB0 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: 81.H0A81 User Capacity: 6,001,175,126,016 bytes [6.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database 7.3/5319 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Apr 14 15:32:03 2022 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 113) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 780) minutes. SCT capabilities: (0x0035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 138 138 054 - 100 3 Spin_Up_Time POS--- 176 176 024 - 359 (Average 387) 4 Start_Stop_Count -O--C- 100 100 000 - 582 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 128 128 020 - 18 9 Power_On_Hours -O--C- 094 094 000 - 43079 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 554 192 Power-Off_Retract_Count -O--CK 099 099 000 - 2272 193 Load_Cycle_Count -O--C- 099 099 000 - 2272 194 Temperature_Celsius -O---- 125 125 000 - 48 (Min/Max 11/79) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 17 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x12 GPL R/O 1 SATA NCQ Non-Data log 0x15 GPL,SL R/W 1 Rebuild Assist log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 256 Current Device Internal Status Data log 0x25 GPL R/O 256 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 17 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 17 [0] occurred at disk power-on lifetime: 42574 hours (1773 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 43 00 00 00 00 00 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 c0 00 02 69 85 50 80 40 08 14d+03:11:28.245 READ FPDMA QUEUED 60 01 00 00 b8 00 02 69 85 4f 80 40 08 14d+03:11:25.583 READ FPDMA QUEUED 60 01 00 00 b0 00 02 69 85 4e 80 40 08 14d+03:11:23.506 READ FPDMA QUEUED 60 01 00 00 00 00 02 69 85 4d 80 40 08 14d+03:11:20.979 READ FPDMA QUEUED 60 01 00 00 f8 00 02 69 85 4c 80 40 08 14d+03:11:17.180 READ FPDMA QUEUED Error 16 [3] occurred at disk power-on lifetime: 42574 hours (1773 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 43 00 00 00 00 00 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 78 00 02 69 85 46 80 40 08 14d+03:11:02.510 READ FPDMA QUEUED 60 01 00 00 80 00 02 69 85 47 80 40 08 14d+03:11:02.510 READ FPDMA QUEUED 60 01 00 00 70 00 02 69 85 45 80 40 08 14d+03:11:00.356 READ FPDMA QUEUED 60 01 00 00 68 00 02 69 85 44 80 40 08 14d+03:11:00.355 READ FPDMA QUEUED 60 00 80 00 60 00 02 69 85 44 00 40 08 14d+03:10:57.497 READ FPDMA QUEUED Error 15 [2] occurred at disk power-on lifetime: 42574 hours (1773 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 43 00 00 00 00 00 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 80 00 02 76 52 42 b8 40 08 14d+03:05:47.499 READ FPDMA QUEUED 60 01 00 00 78 00 02 76 52 41 b8 40 08 14d+03:05:45.560 READ FPDMA QUEUED 60 01 00 00 70 00 02 76 52 40 b8 40 08 14d+03:05:40.804 READ FPDMA QUEUED 60 01 00 00 68 00 02 76 52 3f b8 40 08 14d+03:05:38.456 READ FPDMA QUEUED 60 01 00 00 60 00 02 76 52 3e b8 40 08 14d+03:05:36.113 READ FPDMA QUEUED Error 14 [1] occurred at disk power-on lifetime: 42574 hours (1773 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 43 00 00 00 00 00 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 00 00 02 76 52 31 b8 40 08 14d+03:05:00.750 READ FPDMA QUEUED 60 01 00 00 78 00 02 76 52 30 b8 40 08 14d+03:04:58.221 READ FPDMA QUEUED 60 01 00 00 70 00 02 76 52 2f b8 40 08 14d+03:04:56.184 READ FPDMA QUEUED 60 01 00 00 68 00 02 76 52 2e b8 40 08 14d+03:04:53.771 READ FPDMA QUEUED 60 01 00 00 60 00 02 76 52 2d b8 40 08 14d+03:04:51.705 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 48 Celsius Power Cycle Min/Max Temperature: 36/53 Celsius Lifetime Min/Max Temperature: 11/79 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (55) Index Estimated Time Temperature Celsius 56 2022-04-14 13:25 50 ******************************* ... ..( 6 skipped). .. ******************************* 63 2022-04-14 13:32 50 ******************************* 64 2022-04-14 13:33 49 ****************************** 65 2022-04-14 13:34 50 ******************************* 66 2022-04-14 13:35 50 ******************************* 67 2022-04-14 13:36 49 ****************************** ... ..( 23 skipped). .. ****************************** 91 2022-04-14 14:00 49 ****************************** 92 2022-04-14 14:01 50 ******************************* ... ..( 2 skipped). .. ******************************* 95 2022-04-14 14:04 50 ******************************* 96 2022-04-14 14:05 49 ****************************** ... ..( 15 skipped). .. ****************************** 112 2022-04-14 14:21 49 ****************************** 113 2022-04-14 14:22 50 ******************************* ... ..( 19 skipped). .. ******************************* 5 2022-04-14 14:42 50 ******************************* 6 2022-04-14 14:43 49 ****************************** ... ..( 12 skipped). .. ****************************** 19 2022-04-14 14:56 49 ****************************** 20 2022-04-14 14:57 48 ***************************** ... ..( 33 skipped). .. ***************************** 54 2022-04-14 15:31 48 ***************************** 55 2022-04-14 15:32 50 ******************************* SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 554 --- Lifetime Power-On Resets 0x01 0x018 6 24647836482 --- Logical Sectors Written 0x01 0x020 6 36665570 --- Number of Write Commands 0x01 0x028 6 47477281518 --- Logical Sectors Read 0x01 0x030 6 197905353 --- Number of Read Commands 0x01 0x038 6 155087657000 --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 43069 --- Spindle Motor Power-on Hours 0x03 0x010 4 43069 --- Head Flying Hours 0x03 0x018 4 2272 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 4549006 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 16 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 48 --- Current Temperature 0x05 0x010 1 48 N-- Average Short Term Temperature 0x05 0x018 1 44 N-- Average Long Term Temperature 0x05 0x020 1 79 --- Highest Temperature 0x05 0x028 1 11 --- Lowest Temperature 0x05 0x030 1 73 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 66 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 130885 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 13 --- Number of Hardware Resets 0x06 0x010 4 570 --- Number of ASR Events 0x06 0x018 4 17 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 4 Command failed due to ICRC error 0x0002 2 6 R_ERR response for data FIS 0x0003 2 6 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 1 Device-to-host non-data FIS retries 0x0009 2 13 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 12 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdc smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.17.1-arch1-1] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Black Device Model: WDC WD6001FZWX-00A2VA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 6,001,175,126,016 bytes [6.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Apr 14 15:32:03 2022 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Disabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 37) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: ( 90) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 569) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 100 051 - 0 3 Spin_Up_Time POS--K 250 100 021 - 6483 4 Start_Stop_Count -O--CK 098 098 000 - 2965 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 100 000 - 0 9 Power_On_Hours -O--CK 035 035 000 - 47887 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 800 192 Power-Off_Retract_Count -O--CK 200 100 000 - 658 193 Load_Cycle_Count -O--CK 200 100 000 - 2312 194 Temperature_Celsius -O---K 104 080 000 - 48 196 Reallocated_Event_Count -O--CK 200 100 000 - 0 197 Current_Pending_Sector -O--CK 200 100 000 - 0 198 Offline_Uncorrectable ----CK 200 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x0a GPL R/W 8 Device Statistics Notification 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x12 GPL R/O 1 SATA NCQ Non-Data log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x24 GPL R/O 171 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xaf GPL,SL VS 16 Device vendor specific log 0xb0 GPL,SL VS 1 Device vendor specific log 0xb1-0xb5 GPL,SL VS 16 Device vendor specific log 0xb6 SL VS 16 Device vendor specific log 0xb7 GPL,SL VS 40 Device vendor specific log 0xb8-0xbf GPL,SL VS 16 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xde GPL VS 5502 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 2 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 [1] occurred at disk power-on lifetime: 22315 hours (929 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 01 a0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ec 00 00 00 00 00 00 00 00 00 00 a0 08 12d+01:25:28.540 IDENTIFY DEVICE Error 1 [0] occurred at disk power-on lifetime: 22304 hours (929 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 41 01 00 00 00 4c 0a e7 08 40 00 Error: ICRC, ABRT at LBA = 0x4c0ae708 = 1275782920 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 28 00 00 4c 0a e7 08 40 00 11d+14:25:34.315 READ FPDMA QUEUED 60 00 d8 00 70 00 00 57 8e b3 88 40 00 11d+14:25:34.248 READ FPDMA QUEUED 60 01 00 00 90 00 00 38 ee 9c f8 40 00 11d+14:25:34.204 READ FPDMA QUEUED 60 01 00 00 88 00 00 2e 6d be 00 40 00 11d+14:25:34.187 READ FPDMA QUEUED 60 01 00 00 80 00 00 2e 6d bd 00 40 00 11d+14:25:34.170 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short captive Interrupted (host reset) 50% 19715 - # 2 Short offline Completed without error 00% 8528 - # 3 Extended offline Aborted by host 90% 8528 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 48 Celsius Power Cycle Min/Max Temperature: 35/51 Celsius Lifetime Min/Max Temperature: 10/72 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (458) Index Estimated Time Temperature Celsius 459 2022-04-14 07:35 46 *************************** ... ..( 73 skipped). .. *************************** 55 2022-04-14 08:49 46 *************************** 56 2022-04-14 08:50 45 ************************** ... ..( 41 skipped). .. ************************** 98 2022-04-14 09:32 45 ************************** 99 2022-04-14 09:33 46 *************************** ... ..( 29 skipped). .. *************************** 129 2022-04-14 10:03 46 *************************** 130 2022-04-14 10:04 47 **************************** ... ..( 19 skipped). .. **************************** 150 2022-04-14 10:24 47 **************************** 151 2022-04-14 10:25 48 ***************************** ... ..(238 skipped). .. ***************************** 390 2022-04-14 14:24 48 ***************************** 391 2022-04-14 14:25 49 ****************************** ... ..( 21 skipped). .. ****************************** 413 2022-04-14 14:47 49 ****************************** 414 2022-04-14 14:48 48 ***************************** ... ..( 43 skipped). .. ***************************** 458 2022-04-14 15:32 48 ***************************** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 800 -D- Lifetime Power-On Resets 0x01 0x010 4 47887 -D- Power-on Hours 0x01 0x018 6 155577417851 -D- Logical Sectors Written 0x01 0x020 6 345961360 -D- Number of Write Commands 0x01 0x028 6 477056307245 -D- Logical Sectors Read 0x01 0x030 6 2080921691 -D- Number of Read Commands 0x01 0x038 6 594508160 -D- Date and Time TimeStamp 0x01 0x048 2 3598 ND- Workload Utilization 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 47337 -D- Spindle Motor Power-on Hours 0x03 0x010 4 47337 -D- Head Flying Hours 0x03 0x018 4 2971 -D- Head Load Events 0x03 0x020 4 200 ND- Number of Reallocated Logical Sectors 0x03 0x028 4 7 -D- Read Recovery Attempts 0x03 0x030 4 0 -D- Number of Mechanical Start Failures 0x03 0x038 4 0 -D- Number of Realloc. Candidate Logical Sectors 0x03 0x040 4 658 -D- Number of High Priority Unload Events 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 -D- Number of Reported Uncorrectable Errors 0x04 0x010 4 2 -D- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 48 -D- Current Temperature 0x05 0x010 1 46 -D- Average Short Term Temperature 0x05 0x018 1 44 -D- Average Long Term Temperature 0x05 0x020 1 72 -D- Highest Temperature 0x05 0x028 1 13 -D- Lowest Temperature 0x05 0x030 1 65 -D- Highest Average Short Term Temperature 0x05 0x038 1 19 -D- Lowest Average Short Term Temperature 0x05 0x040 1 58 -D- Highest Average Long Term Temperature 0x05 0x048 1 26 -D- Lowest Average Long Term Temperature 0x05 0x050 4 25240 -D- Time in Over-Temperature 0x05 0x058 1 60 -D- Specified Maximum Operating Temperature 0x05 0x060 4 0 -D- Time in Under-Temperature 0x05 0x068 1 0 -D- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 532916 -D- Number of Hardware Resets 0x06 0x010 4 1572 -D- Number of ASR Events 0x06 0x018 4 2 -D- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 0 Vendor specific