/dev/nvme0n1 smartctl 7.5 2025-04-30 r5714 [x86_64-linux-6.12.25-generic-1rosa13-x86_64] (local build) Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: HS-SSD-E1000 256G Serial Number: -- Firmware Version: SN09945 PCI Vendor/Subsystem ID: 0x1e4b IEEE OUI Identifier: 0x000000 Total NVM Capacity: 256,060,514,304 [256 GB] Unallocated NVM Capacity: 0 Controller ID: 0 NVMe Version: 1.4 Number of Namespaces: 1 Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] Namespace 1 Utilization: 237,720,330,240 [237 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 000000 ... Local Time is: Sat Jul 5 20:10:38 2025 MSK Firmware Updates (0x1a): 5 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 90 Celsius Critical Comp. Temp. Threshold: 95 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.50W - - 0 0 0 0 0 0 1 + 5.80W - - 1 1 1 1 0 0 2 + 3.60W - - 2 2 2 2 0 0 3 - 0.0500W - - 3 3 3 3 5000 10000 4 - 0.0025W - - 4 4 4 4 8000 45000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02, NSID 0x1) Critical Warning: 0x00 Temperature: 25 Celsius Available Spare: 100% Available Spare Threshold: 1% Percentage Used: 6% Data Units Read: 18,313,480 [9.37 TB] Data Units Written: 18,711,177 [9.58 TB] Host Read Commands: 217,432,036 Host Write Commands: 206,846,703 Controller Busy Time: 580 Power Cycles: 2,340 Power On Hours: 858 Unsafe Shutdowns: 565 Media and Data Integrity Errors: 0 Error Information Log Entries: 2,189 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 25 Celsius Temperature Sensor 2: 26 Celsius Error Information (NVMe Log 0x01, 16 of 64 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS Message 0 2189 0 0x600c 0x4004 0x000 0 0 - Invalid Field in Command 1 2188 0 0x000f 0x4004 0x000 0 0 - Invalid Field in Command Self-test Log (NVMe Log 0x06, NSID 0xffffffff) Self-test status: No self-test in progress No Self-tests Logged /dev/sda smartctl 7.5 2025-04-30 r5714 [x86_64-linux-6.12.25-generic-1rosa13-x86_64] (local build) Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8 (AF) Device Model: ST1000LM024 HN-M101MBB Serial Number: -- LU WWN Device Id: 5 0004cf ... Firmware Version: 2BA30001 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database 7.5/5706 ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Jul 5 20:10:38 2025 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (13440) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 224) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 2698 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 092 085 025 - 2599 4 Start_Stop_Count -O--CK 092 092 000 - 8212 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 13109 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 622 12 Power_Cycle_Count -O--CK 093 093 000 - 8030 191 G-Sense_Error_Rate -O---K 100 100 000 - 752 192 Power-Off_Retract_Count -O---K 098 098 000 - 2397 194 Temperature_Celsius -O---- 064 052 000 - 23 (Min/Max 13/48) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 100 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 10 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 6097 223 Load_Retry_Count -O--CK 100 100 000 - 622 225 Load_Cycle_Count -O--CK 094 094 000 - 67720 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 2666 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2666 [1] occurred at disk power-on lifetime: 12840 hours (535 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 10 00 00 00 00 08 00 40 00 Error: ICRC, ABRT 16 sectors at LBA = 0x00000800 = 2048 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 ff d5 00 10 00 00 00 00 08 00 40 00 00:00:00.003 READ DMA EXT 25 ff d5 00 01 00 00 3d 09 08 00 40 00 00:00:00.003 READ DMA EXT 25 ff d5 00 01 00 00 18 6a 08 00 40 00 00:00:00.003 READ DMA EXT 25 ff d5 00 01 00 00 00 03 28 00 40 00 00:00:00.003 READ DMA EXT 25 ff d5 00 01 00 00 00 00 08 00 40 00 00:00:00.003 READ DMA EXT Error 2665 [0] occurred at disk power-on lifetime: 12824 hours (534 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 40 00 00 3d 69 08 00 40 00 Error: ICRC, ABRT 64 sectors at LBA = 0x3d690800 = 1030293504 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 ff d5 00 40 00 00 3d 69 08 00 40 00 00:00:00.004 READ DMA EXT 35 ff d5 00 08 00 00 3d 64 99 28 40 00 00:00:00.004 WRITE DMA EXT 35 ff d5 00 08 00 00 3d 64 99 38 40 00 00:00:00.004 WRITE DMA EXT 35 ff d5 00 08 00 00 3d 64 99 30 40 00 00:00:00.004 WRITE DMA EXT 35 ff d5 00 08 00 00 3d 64 99 20 40 00 00:00:00.004 WRITE DMA EXT Error 2664 [7] occurred at disk power-on lifetime: 11980 hours (499 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 01 00 00 00 00 13 80 f3 40 00 Error: UNC at LBA = 0x001380f3 = 1278195 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 90 01 00 00 00 00 13 80 f3 40 00 00:00:00.736 READ FPDMA QUEUED 60 00 90 01 00 00 00 00 13 87 f3 40 00 00:00:00.752 READ FPDMA QUEUED 60 00 90 01 00 00 00 00 13 86 f3 40 00 00:00:00.752 READ FPDMA QUEUED 60 00 90 01 00 00 00 00 13 85 f3 40 00 00:00:00.752 READ FPDMA QUEUED 60 00 90 01 00 00 00 00 13 84 f3 40 00 00:00:00.752 READ FPDMA QUEUED Error 2663 [6] occurred at disk power-on lifetime: 11980 hours (499 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 01 00 00 00 13 80 f2 40 00 Error: UNC at LBA = 0x001380f2 = 1278194 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 90 00 01 00 00 00 13 80 f2 40 00 00:00:00.736 READ FPDMA QUEUED 60 00 90 00 01 00 00 00 13 80 f2 40 00 00:00:00.749 READ FPDMA QUEUED 60 00 90 01 00 00 00 00 13 87 f2 40 00 00:00:00.749 READ FPDMA QUEUED 60 00 90 01 00 00 00 00 13 86 f2 40 00 00:00:00.749 READ FPDMA QUEUED 60 00 90 01 00 00 00 00 13 85 f2 40 00 00:00:00.749 READ FPDMA QUEUED Error 2662 [5] occurred at disk power-on lifetime: 11980 hours (499 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 01 00 00 00 00 13 80 f2 40 00 Error: UNC at LBA = 0x001380f2 = 1278194 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 90 01 00 00 00 00 13 80 f2 40 00 00:00:00.736 READ FPDMA QUEUED 60 00 90 01 00 00 00 00 13 87 f2 40 00 00:00:00.745 READ FPDMA QUEUED 60 00 90 01 00 00 00 00 13 86 f2 40 00 00:00:00.745 READ FPDMA QUEUED 60 00 90 01 00 00 00 00 13 85 f2 40 00 00:00:00.745 READ FPDMA QUEUED 60 00 90 01 00 00 00 00 13 84 f2 40 00 00:00:00.745 READ FPDMA QUEUED Error 2661 [4] occurred at disk power-on lifetime: 11980 hours (499 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 01 00 00 00 13 80 f1 40 00 Error: UNC at LBA = 0x001380f1 = 1278193 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 90 00 01 00 00 00 13 80 f1 40 00 00:00:00.736 READ FPDMA QUEUED 60 00 90 00 01 00 00 00 13 80 f1 40 00 00:00:00.742 READ FPDMA QUEUED 60 00 90 01 00 00 00 00 13 87 f1 40 00 00:00:00.742 READ FPDMA QUEUED 60 00 90 01 00 00 00 00 13 86 f1 40 00 00:00:00.742 READ FPDMA QUEUED 60 00 90 01 00 00 00 00 13 85 f1 40 00 00:00:00.742 READ FPDMA QUEUED Error 2660 [3] occurred at disk power-on lifetime: 11980 hours (499 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 01 00 00 00 00 13 80 f1 40 00 Error: UNC at LBA = 0x001380f1 = 1278193 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 90 01 00 00 00 00 13 80 f1 40 00 00:00:00.736 READ FPDMA QUEUED 60 00 90 01 00 00 00 00 13 87 f1 40 00 00:00:00.739 READ FPDMA QUEUED 60 00 90 01 00 00 00 00 13 86 f1 40 00 00:00:00.739 READ FPDMA QUEUED 60 00 90 01 00 00 00 00 13 85 f1 40 00 00:00:00.739 READ FPDMA QUEUED 60 00 90 01 00 00 00 00 13 84 f1 40 00 00:00:00.739 READ FPDMA QUEUED Error 2659 [2] occurred at disk power-on lifetime: 11980 hours (499 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 01 00 00 00 13 80 f0 40 00 Error: UNC at LBA = 0x001380f0 = 1278192 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 90 00 01 00 00 00 13 80 f0 40 00 00:00:00.736 READ FPDMA QUEUED 60 00 90 00 01 00 00 00 13 80 f0 40 00 00:00:00.736 READ FPDMA QUEUED 60 00 90 00 01 00 00 00 13 80 ef 40 00 00:00:00.736 READ FPDMA QUEUED 60 00 90 00 01 00 00 00 13 80 ee 40 00 00:00:00.736 READ FPDMA QUEUED 60 00 90 00 01 00 00 00 13 80 ed 40 00 00:00:00.736 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 12462 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 26 Celsius Power Cycle Min/Max Temperature: 23/26 Celsius Lifetime Min/Max Temperature: 12/48 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (121) Index Estimated Time Temperature Celsius 122 2025-07-05 09:35 26 ******* 123 2025-07-05 09:40 27 ******** 124 2025-07-05 09:45 27 ******** 125 2025-07-05 09:50 29 ********** ... ..( 3 skipped). .. ********** 1 2025-07-05 10:10 29 ********** 2 2025-07-05 10:15 23 **** 3 2025-07-05 10:20 25 ****** 4 2025-07-05 10:25 29 ********** 5 2025-07-05 10:30 28 ********* 6 2025-07-05 10:35 28 ********* 7 2025-07-05 10:40 27 ******** 8 2025-07-05 10:45 26 ******* 9 2025-07-05 10:50 27 ******** 10 2025-07-05 10:55 33 ************** 11 2025-07-05 11:00 35 **************** 12 2025-07-05 11:05 26 ******* 13 2025-07-05 11:10 27 ******** 14 2025-07-05 11:15 30 *********** 15 2025-07-05 11:20 33 ************** 16 2025-07-05 11:25 30 *********** 17 2025-07-05 11:30 25 ****** 18 2025-07-05 11:35 26 ******* 19 2025-07-05 11:40 25 ****** 20 2025-07-05 11:45 26 ******* 21 2025-07-05 11:50 28 ********* 22 2025-07-05 11:55 28 ********* 23 2025-07-05 12:00 29 ********** 24 2025-07-05 12:05 33 ************** 25 2025-07-05 12:10 29 ********** 26 2025-07-05 12:15 29 ********** 27 2025-07-05 12:20 25 ****** 28 2025-07-05 12:25 26 ******* ... ..( 3 skipped). .. ******* 32 2025-07-05 12:45 26 ******* 33 2025-07-05 12:50 25 ****** 34 2025-07-05 12:55 25 ****** 35 2025-07-05 13:00 25 ****** 36 2025-07-05 13:05 26 ******* 37 2025-07-05 13:10 26 ******* 38 2025-07-05 13:15 24 ***** 39 2025-07-05 13:20 25 ****** 40 2025-07-05 13:25 24 ***** 41 2025-07-05 13:30 25 ****** 42 2025-07-05 13:35 25 ****** 43 2025-07-05 13:40 27 ******** 44 2025-07-05 13:45 28 ********* 45 2025-07-05 13:50 29 ********** 46 2025-07-05 13:55 27 ******** 47 2025-07-05 14:00 27 ******** 48 2025-07-05 14:05 24 ***** 49 2025-07-05 14:10 25 ****** 50 2025-07-05 14:15 28 ********* 51 2025-07-05 14:20 28 ********* 52 2025-07-05 14:25 27 ******** 53 2025-07-05 14:30 25 ****** 54 2025-07-05 14:35 27 ******** 55 2025-07-05 14:40 28 ********* 56 2025-07-05 14:45 28 ********* 57 2025-07-05 14:50 28 ********* 58 2025-07-05 14:55 27 ******** 59 2025-07-05 15:00 28 ********* ... ..( 7 skipped). .. ********* 67 2025-07-05 15:40 28 ********* 68 2025-07-05 15:45 29 ********** 69 2025-07-05 15:50 28 ********* ... ..( 2 skipped). .. ********* 72 2025-07-05 16:05 28 ********* 73 2025-07-05 16:10 27 ******** 74 2025-07-05 16:15 28 ********* ... ..( 3 skipped). .. ********* 78 2025-07-05 16:35 28 ********* 79 2025-07-05 16:40 22 *** 80 2025-07-05 16:45 24 ***** 81 2025-07-05 16:50 25 ****** 82 2025-07-05 16:55 25 ****** 83 2025-07-05 17:00 26 ******* 84 2025-07-05 17:05 28 ********* 85 2025-07-05 17:10 28 ********* 86 2025-07-05 17:15 29 ********** 87 2025-07-05 17:20 29 ********** 88 2025-07-05 17:25 29 ********** 89 2025-07-05 17:30 30 *********** ... ..( 3 skipped). .. *********** 93 2025-07-05 17:50 30 *********** 94 2025-07-05 17:55 29 ********** ... ..( 6 skipped). .. ********** 101 2025-07-05 18:30 29 ********** 102 2025-07-05 18:35 30 *********** 103 2025-07-05 18:40 30 *********** 104 2025-07-05 18:45 29 ********** 105 2025-07-05 18:50 30 *********** 106 2025-07-05 18:55 29 ********** 107 2025-07-05 19:00 30 *********** 108 2025-07-05 19:05 31 ************ 109 2025-07-05 19:10 30 *********** ... ..( 7 skipped). .. *********** 117 2025-07-05 19:50 30 *********** 118 2025-07-05 19:55 31 ************ 119 2025-07-05 20:00 31 ************ 120 2025-07-05 20:05 30 *********** 121 2025-07-05 20:10 26 ******* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 1 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific /dev/sdb smartctl 7.5 2025-04-30 r5714 [x86_64-linux-6.12.25-generic-1rosa13-x86_64] (local build) Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: AGI512G17AI178 Serial Number: -- Firmware Version: W0201A0 User Capacity: 512,110,190,592 bytes [512 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: Not in smartctl database 7.5/5706 ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Jul 5 20:10:39 2025 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SCT capabilities: (0x0001) SCT Status supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 9 Power_On_Hours -O--CK 100 100 050 - 213 12 Power_Cycle_Count -O--CK 100 100 050 - 2061 160 Unknown_Attribute -O--CK 100 100 050 - 0 161 Unknown_Attribute PO--CK 100 100 050 - 100 163 Unknown_Attribute -O--CK 100 100 050 - 24 164 Unknown_Attribute -O--CK 100 100 050 - 17495 165 Unknown_Attribute -O--CK 100 100 050 - 47 166 Unknown_Attribute -O--CK 100 100 050 - 11 167 Unknown_Attribute -O--CK 100 100 050 - 41 168 Unknown_Attribute -O--CK 100 100 050 - 5050 169 Unknown_Attribute -O--CK 100 100 050 - 100 175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 0 177 Wear_Leveling_Count -O--CK 100 100 050 - 0 178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 192 Power-Off_Retract_Count -O--CK 100 100 050 - 870 194 Temperature_Celsius -O---K 100 100 050 - 40 195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 196 Reallocated_Event_Count -O--CK 100 100 050 - 0 197 Current_Pending_Sector -O--CK 100 100 050 - 0 198 Offline_Uncorrectable -O--CK 100 100 050 - 0 199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 232 Available_Reservd_Space -O--CK 100 100 050 - 100 241 Total_LBAs_Written ----CK 100 100 050 - 225942 242 Total_LBAs_Read ----CK 100 100 050 - 129074 245 Unknown_Attribute -O--CK 100 100 050 - 131757 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 88 Current Device Internal Status Data log 0x25 GPL R/O 32 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) Device State: Active (0) Current Temperature: 40 Celsius Power Cycle Min/Max Temperature: 40/40 Celsius Lifetime Min/Max Temperature: 27/40 Celsius Specified Max Operating Temperature: 100 Celsius Under/Over Temperature Limit Count: 0/0 SCT Data Table command not supported SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 2061 --- Lifetime Power-On Resets 0x01 0x010 4 213 --- Power-on Hours 0x01 0x018 6 1922452341 --- Logical Sectors Written 0x01 0x020 6 76687066 --- Number of Write Commands 0x01 0x028 6 4164080408 --- Logical Sectors Read 0x01 0x030 6 46125831 --- Number of Read Commands 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x000a 4 2 Device-to-host register FISes sent due to a COMRESET