/dev/nvme0n1 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.14.10-200.fc34.x86_64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: SK hynix BC711 HFM256GD3JX013N Serial Number: -- Firmware Version: HPS1 PCI Vendor/Subsystem ID: 0x1c5c IEEE OUI Identifier: 0xace42e Total NVM Capacity: 256,060,514,304 [256 GB] Unallocated NVM Capacity: 0 Controller ID: 1 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: ace42e ... Local Time is: Mon Oct 18 19:34:21 2021 +0330 Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x001f): Security Format Frmw_DL NS_Mngmt Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x1e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Pers_Ev_Lg Maximum Data Transfer Size: 64 Pages Warning Comp. Temp. Threshold: 84 Celsius Critical Comp. Temp. Threshold: 85 Celsius Namespace 1 Features (0x02): NA_Fields Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.3000W - - 0 0 0 0 5 5 1 + 2.4000W - - 1 1 1 1 30 30 2 + 1.9000W - - 2 2 2 2 100 100 3 - 0.0500W - - 3 3 3 3 1000 1000 4 - 0.0040W - - 3 3 3 3 1000 9000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 1 - 4096 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 30 Celsius Available Spare: 100% Available Spare Threshold: 5% Percentage Used: 0% Data Units Read: 554,123 [283 GB] Data Units Written: 722,984 [370 GB] Host Read Commands: 4,871,934 Host Write Commands: 7,605,932 Controller Busy Time: 12 Power Cycles: 76 Power On Hours: 94 Unsafe Shutdowns: 13 Media and Data Integrity Errors: 10515566459218129898700800 Error Information Log Entries: 1 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 30 Celsius Temperature Sensor 2: 36 Celsius Error Information (NVMe Log 0x01, 16 of 256 entries) No Errors Logged /dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.14.10-200.fc34.x86_64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD10JPCX-24UE4T0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Oct 18 19:34:21 2021 +0330 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 96 (intermediate level with standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (17640) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 198) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 195 182 021 - 1241 4 Start_Stop_Count -O--CK 001 001 000 - 167861 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate POSR-K 200 200 051 - 0 9 Power_On_Hours -O--CK 084 084 000 - 12292 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 096 096 000 - 4738 192 Power-Off_Retract_Count -O--CK 200 200 000 - 445 193 Load_Cycle_Count -O--CK 007 007 000 - 581821 194 Temperature_Celsius -O---K 118 101 000 - 29 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 240 Head_Flying_Hours -O--CK 086 086 000 - 10386 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 38 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 29 Celsius Power Cycle Min/Max Temperature: 26/29 Celsius Lifetime Min/Max Temperature: 21/46 Celsius Specified Max Operating Temperature: 28 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (81) Index Estimated Time Temperature Celsius 82 2021-10-18 17:27 34 *************** ... ..( 4 skipped). .. *************** 87 2021-10-18 17:32 34 *************** 88 2021-10-18 17:33 33 ************** ... ..( 7 skipped). .. ************** 96 2021-10-18 17:41 33 ************** 97 2021-10-18 17:42 32 ************* 98 2021-10-18 17:43 32 ************* 99 2021-10-18 17:44 ? - 100 2021-10-18 17:45 32 ************* 101 2021-10-18 17:46 ? - 102 2021-10-18 17:47 25 ****** 103 2021-10-18 17:48 26 ******* 104 2021-10-18 17:49 ? - 105 2021-10-18 17:50 26 ******* 106 2021-10-18 17:51 26 ******* 107 2021-10-18 17:52 ? - 108 2021-10-18 17:53 26 ******* 109 2021-10-18 17:54 27 ******** 110 2021-10-18 17:55 ? - 111 2021-10-18 17:56 27 ******** 112 2021-10-18 17:57 ? - 113 2021-10-18 17:58 27 ******** 114 2021-10-18 17:59 27 ******** 115 2021-10-18 18:00 ? - 116 2021-10-18 18:01 27 ******** 117 2021-10-18 18:02 27 ******** 118 2021-10-18 18:03 ? - 119 2021-10-18 18:04 27 ******** 120 2021-10-18 18:05 27 ******** 121 2021-10-18 18:06 ? - 122 2021-10-18 18:07 27 ******** 123 2021-10-18 18:08 ? - 124 2021-10-18 18:09 28 ********* 125 2021-10-18 18:10 28 ********* 126 2021-10-18 18:11 ? - 127 2021-10-18 18:12 28 ********* 0 2021-10-18 18:13 28 ********* 1 2021-10-18 18:14 ? - 2 2021-10-18 18:15 28 ********* 3 2021-10-18 18:16 ? - 4 2021-10-18 18:17 28 ********* 5 2021-10-18 18:18 28 ********* 6 2021-10-18 18:19 ? - 7 2021-10-18 18:20 28 ********* 8 2021-10-18 18:21 28 ********* 9 2021-10-18 18:22 ? - 10 2021-10-18 18:23 28 ********* 11 2021-10-18 18:24 ? - 12 2021-10-18 18:25 28 ********* 13 2021-10-18 18:26 28 ********* 14 2021-10-18 18:27 ? - 15 2021-10-18 18:28 28 ********* 16 2021-10-18 18:29 29 ********** 17 2021-10-18 18:30 ? - 18 2021-10-18 18:31 29 ********** 19 2021-10-18 18:32 ? - 20 2021-10-18 18:33 29 ********** 21 2021-10-18 18:34 29 ********** 22 2021-10-18 18:35 ? - 23 2021-10-18 18:36 29 ********** 24 2021-10-18 18:37 29 ********** 25 2021-10-18 18:38 ? - 26 2021-10-18 18:39 29 ********** 27 2021-10-18 18:40 30 *********** 28 2021-10-18 18:41 ? - 29 2021-10-18 18:42 30 *********** 30 2021-10-18 18:43 ? - 31 2021-10-18 18:44 30 *********** 32 2021-10-18 18:45 30 *********** 33 2021-10-18 18:46 ? - 34 2021-10-18 18:47 30 *********** 35 2021-10-18 18:48 ? - 36 2021-10-18 18:49 30 *********** 37 2021-10-18 18:50 30 *********** 38 2021-10-18 18:51 ? - 39 2021-10-18 18:52 30 *********** 40 2021-10-18 18:53 30 *********** 41 2021-10-18 18:54 ? - 42 2021-10-18 18:55 30 *********** 43 2021-10-18 18:56 ? - 44 2021-10-18 18:57 31 ************ 45 2021-10-18 18:58 31 ************ 46 2021-10-18 18:59 31 ************ 47 2021-10-18 19:00 ? - 48 2021-10-18 19:01 31 ************ 49 2021-10-18 19:02 ? - 50 2021-10-18 19:03 31 ************ 51 2021-10-18 19:04 ? - 52 2021-10-18 19:05 26 ******* 53 2021-10-18 19:06 ? - 54 2021-10-18 19:07 26 ******* 55 2021-10-18 19:08 26 ******* 56 2021-10-18 19:09 27 ******** 57 2021-10-18 19:10 ? - 58 2021-10-18 19:11 27 ******** 59 2021-10-18 19:12 ? - 60 2021-10-18 19:13 27 ******** 61 2021-10-18 19:14 ? - 62 2021-10-18 19:15 27 ******** 63 2021-10-18 19:16 27 ******** 64 2021-10-18 19:17 27 ******** 65 2021-10-18 19:18 ? - 66 2021-10-18 19:19 28 ********* 67 2021-10-18 19:20 28 ********* 68 2021-10-18 19:21 28 ********* 69 2021-10-18 19:22 ? - 70 2021-10-18 19:23 28 ********* ... ..( 7 skipped). .. ********* 78 2021-10-18 19:31 28 ********* 79 2021-10-18 19:32 29 ********** 80 2021-10-18 19:33 ? - 81 2021-10-18 19:34 29 ********** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 938 Vendor specific