/dev/sda === START OF INFORMATION SECTION === Model Family: Seagate U6 Device Model: ST340810A Serial Number: -- Firmware Version: 3.99 User Capacity: 40,019,582,464 bytes [40.0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-6 (minor revision not indicated) Local Time is: Sun May 10 21:10:30 2020 +04 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 128 (quiet), recommended: 128 APM level is: 64 (intermediate level with standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 420) seconds. Offline data collection capabilities: (0x1d) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 42) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 078 052 025 - 42382116 3 Spin_Up_Time PO---- 098 098 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 248 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 7 7 Seek_Error_Rate POSR-- 083 060 030 - 209257676 9 Power_On_Hours -O--CK 091 091 000 - 8261 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 097 097 020 - 3376 194 Temperature_Celsius -O---K 030 058 000 - 30 195 Hardware_ECC_Recovered -O-RC- 100 253 000 - 0 197 Current_Pending_Sector -O--C- 100 100 000 - 2 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 158 000 - 243 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory not supported SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x80-0x9f SL R/W 16 Host vendor specific log 0xa0 SL VS 1 Device vendor specific log 0xa1 SL VS 20 Device vendor specific log 0xa2 SL VS 101 Device vendor specific log 0xa8 SL VS 20 Device vendor specific log 0xa9 SL VS 1 Device vendor specific log SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 ATA Error Count: 1075 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1075 occurred at disk power-on lifetime: 8259 hours (344 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 9a 03 00 e0 Error: UNC at LBA = 0x0000039a = 922 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 01 9a 03 00 e0 00 00:00:00.285 READ DMA ec 00 08 00 00 00 00 00 00:00:01.458 IDENTIFY DEVICE c8 00 20 00 61 44 e1 00 00:00:09.163 READ DMA c8 00 90 e0 eb 84 e1 00 00:00:00.971 READ DMA c8 00 80 60 eb 84 e1 00 00:00:00.912 READ DMA Error 1074 occurred at disk power-on lifetime: 8259 hours (344 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 9a 03 00 e0 Error: UNC at LBA = 0x0000039a = 922 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 01 9a 03 00 e0 00 00:00:01.766 READ DMA c8 00 01 99 03 00 e0 00 00:00:00.078 READ DMA c8 00 01 98 03 00 e0 00 00:00:00.078 READ DMA c8 00 04 94 03 00 e0 00 00:00:00.112 READ DMA c8 00 e0 78 32 07 e0 00 00:00:24.669 READ DMA Error 1073 occurred at disk power-on lifetime: 8259 hours (344 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 65 9b 03 00 e0 Error: UNC 101 sectors at LBA = 0x0000039b = 923 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 f8 08 03 00 e0 00 00:00:00.115 READ DMA c8 00 00 08 02 00 e0 00 00:00:02.963 READ DMA c8 00 08 80 0b 80 e0 00 00:00:00.124 READ DMA c8 00 f0 10 01 00 e0 00 00:00:02.371 READ DMA c8 00 08 c8 1b 80 e0 00 00:00:00.116 READ DMA Error 1072 occurred at disk power-on lifetime: 8259 hours (344 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 9a 03 00 e0 Error: UNC at LBA = 0x0000039a = 922 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 01 00 03 00 e0 00 00:00:18.905 READ DMA f8 00 00 00 00 00 e0 00 00:00:00.116 READ NATIVE MAX ADDRESS [OBS-ACS-3] ec 00 00 00 00 00 a0 02 00:00:01.333 IDENTIFY DEVICE ef 03 00 00 00 00 a0 02 00:00:02.996 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:00:00.115 READ NATIVE MAX ADDRESS [OBS-ACS-3] Error 1071 occurred at disk power-on lifetime: 8259 hours (344 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 65 9b 03 00 e0 Error: UNC 101 sectors at LBA = 0x0000039b = 923 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 00 03 00 e0 00 00:00:00.085 READ DMA c8 00 00 00 02 00 e0 00 00:00:07.023 READ DMA c8 00 f0 10 01 00 e0 00 00:00:01.605 READ DMA c8 00 90 80 00 00 e0 00 00:00:00.974 READ DMA c8 00 38 40 00 00 e0 00 00:00:00.397 READ DMA SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) not supported