Probe #556e4cd2c9 of Gigabyte B450M DS3H-CF Desktop Computer (B450M DS3H)

Log: smartctl

/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.2.6-desktop-1omv2390] (OpenMandriva Lx 7.3-3) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba 3.5" DT01ACA... Desktop HDD Device Model: TOSHIBA DT01ACA100 Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: MS2OA750 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Jul 21 10:51:15 2023 +08 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 7119) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 119) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 142 142 054 - 70 3 Spin_Up_Time POS--- 161 161 024 - 140 (Average 144) 4 Start_Stop_Count -O--C- 100 100 000 - 1349 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 115 115 020 - 34 9 Power_On_Hours -O--C- 100 100 000 - 1965 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 1313 192 Power-Off_Retract_Count -O--CK 099 099 000 - 1357 193 Load_Cycle_Count -O--C- 099 099 000 - 1357 194 Temperature_Celsius -O---- 162 162 000 - 37 (Min/Max 25/44) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 1877 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 1877 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1877 [0] occurred at disk power-on lifetime: 881 hours (36 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 08 03 00 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00000803 = 2051 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 20 20 00 01 00 00 00 00 08 03 e0 00 00:53:30.338 READ DMA EXT 25 20 20 00 01 00 00 00 00 08 02 e0 00 00:53:30.338 READ DMA EXT 25 20 20 00 01 00 00 00 00 08 01 e0 00 00:53:30.338 READ DMA EXT 25 20 20 00 01 00 00 00 00 08 00 e0 00 00:53:30.336 READ DMA EXT 25 20 20 00 01 00 00 00 00 00 00 e0 00 00:53:30.330 READ DMA EXT Error 1876 [3] occurred at disk power-on lifetime: 881 hours (36 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 00 00 00 00 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 20 20 00 01 00 00 00 00 00 00 e0 00 00:53:30.309 READ DMA EXT c6 20 20 00 10 00 00 00 00 00 00 ef 00 00:53:30.309 SET MULTIPLE MODE 91 20 20 00 3f 00 00 00 00 00 00 ef 00 00:53:30.308 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 20 00 01 00 00 00 00 00 01 e0 00 00:53:30.307 RECALIBRATE [OBS-4] f5 20 00 01 00 00 00 00 00 00 00 e0 04 00:53:30.296 SECURITY FREEZE LOCK Error 1875 [2] occurred at disk power-on lifetime: 881 hours (36 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 50 00 00 3d 9a c3 a3 0d 00 Error: ICRC, ABRT 80 sectors at LBA = 0x3d9ac3a3 = 1033552803 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 20 20 00 7f 00 00 3d 9a c3 74 e0 00 00:46:42.712 READ DMA EXT 25 20 20 00 7f 00 00 3d 9a c2 f5 e0 00 00:46:42.711 READ DMA EXT 25 20 20 00 7f 00 00 3d 9a c2 76 e0 00 00:46:42.711 READ DMA EXT 25 20 20 00 7f 00 00 3d 9a c1 f7 e0 00 00:46:42.711 READ DMA EXT 25 20 20 00 7f 00 00 3d 9a c1 78 e0 00 00:46:42.710 READ DMA EXT Error 1874 [1] occurred at disk power-on lifetime: 881 hours (36 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 20 00 00 3d 9a bf 5c 0d 00 Error: ICRC, ABRT 32 sectors at LBA = 0x3d9abf5c = 1033551708 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 20 20 00 7f 00 00 3d 9a be fd e0 00 00:46:42.707 READ DMA EXT 25 20 20 00 7f 00 00 3d 9a be 7e e0 00 00:46:42.707 READ DMA EXT 25 20 20 00 7f 00 00 3d 9a bd ff e0 00 00:46:42.706 READ DMA EXT 25 20 20 00 7f 00 00 3d 9a bd 80 e0 00 00:46:42.706 READ DMA EXT 25 20 20 00 7f 00 00 3d 9a c2 f5 e0 00 00:46:42.705 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1088 - # 2 Extended offline Completed without error 00% 54 - # 3 Extended offline Completed without error 00% 39 - # 4 Short offline Completed without error 00% 37 - # 5 Extended offline Completed without error 00% 33 - # 6 Extended offline Aborted by host 90% 31 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 30/37 Celsius Lifetime Min/Max Temperature: 25/44 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (24) Index Estimated Time Temperature Celsius 25 2023-07-21 08:44 41 ********************** ... ..( 47 skipped). .. ********************** 73 2023-07-21 09:32 41 ********************** 74 2023-07-21 09:33 40 ********************* ... ..( 7 skipped). .. ********************* 82 2023-07-21 09:41 40 ********************* 83 2023-07-21 09:42 39 ******************** ... ..( 4 skipped). .. ******************** 88 2023-07-21 09:47 39 ******************** 89 2023-07-21 09:48 38 ******************* ... ..( 21 skipped). .. ******************* 111 2023-07-21 10:10 38 ******************* 112 2023-07-21 10:11 37 ****************** 113 2023-07-21 10:12 37 ****************** 114 2023-07-21 10:13 37 ****************** 115 2023-07-21 10:14 ? - 116 2023-07-21 10:15 30 *********** 117 2023-07-21 10:16 31 ************ 118 2023-07-21 10:17 32 ************* 119 2023-07-21 10:18 32 ************* 120 2023-07-21 10:19 33 ************** 121 2023-07-21 10:20 33 ************** 122 2023-07-21 10:21 34 *************** 123 2023-07-21 10:22 34 *************** 124 2023-07-21 10:23 35 **************** ... ..( 2 skipped). .. **************** 127 2023-07-21 10:26 35 **************** 0 2023-07-21 10:27 36 ***************** ... ..( 3 skipped). .. ***************** 4 2023-07-21 10:31 36 ***************** 5 2023-07-21 10:32 37 ****************** ... ..( 18 skipped). .. ****************** 24 2023-07-21 10:51 37 ****************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1313 --- Lifetime Power-On Resets 0x01 0x010 4 1965 --- Power-on Hours 0x01 0x018 6 11405517822 --- Logical Sectors Written 0x01 0x020 6 160545929 --- Number of Write Commands 0x01 0x028 6 102256841442 --- Logical Sectors Read 0x01 0x030 6 336736564 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 1954 --- Spindle Motor Power-on Hours 0x03 0x010 4 1954 --- Head Flying Hours 0x03 0x018 4 1357 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 47 --- Read Recovery Attempts 0x03 0x030 4 19 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 31 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 37 --- Current Temperature 0x05 0x010 1 38 N-- Average Short Term Temperature 0x05 0x018 1 32 N-- Average Long Term Temperature 0x05 0x020 1 44 --- Highest Temperature 0x05 0x028 1 25 --- Lowest Temperature 0x05 0x030 1 40 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 38 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 3406 --- Number of Hardware Resets 0x06 0x010 4 1890 --- Number of ASR Events 0x06 0x018 4 1877 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 92 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 10 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.2.6-desktop-1omv2390] (OpenMandriva Lx 7.3-3) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST500DM002-1BD142 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: KC48 User Capacity: 500,103,634,432 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Jul 21 10:51:17 2023 +08 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 208 (intermediate), recommended: 208 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 592) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 77) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 102 094 006 - 1353848 3 Spin_Up_Time PO---- 100 098 000 - 0 4 Start_Stop_Count -O--CK 099 099 020 - 1488 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 073 060 030 - 17267600739 9 Power_On_Hours -O--CK 098 098 000 - 2316 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 099 099 020 - 1490 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 001 001 000 - 124 188 Command_Timeout -O--CK 100 098 000 - 39 39 54 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 063 053 045 - 37 (Min/Max 28/37) 194 Temperature_Celsius -O---K 037 047 000 - 37 (0 24 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 054 028 000 - 1353848 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 2225h+54m+05.920s 241 Total_LBAs_Written ------ 100 253 000 - 3986546309 242 Total_LBAs_Read ------ 100 253 000 - 2310961945 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 2928 Device vendor specific log 0xbd GPL VS 252 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 123 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 123 [2] occurred at disk power-on lifetime: 2306 hours (96 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 f2 89 27 00 00 Error: UNC at LBA = 0x00f28927 = 15894823 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 01 00 00 00 f2 89 27 40 00 03:45:31.095 READ FPDMA QUEUED 60 00 00 00 08 00 00 00 05 2a 50 40 00 03:45:31.095 READ FPDMA QUEUED 61 00 00 00 08 00 00 00 11 f0 00 40 00 03:45:31.094 WRITE FPDMA QUEUED 60 00 00 00 08 00 00 00 c5 b2 c8 40 00 03:45:31.068 READ FPDMA QUEUED 60 00 00 00 40 00 00 05 2e 9f c0 40 00 03:45:31.067 READ FPDMA QUEUED Error 122 [1] occurred at disk power-on lifetime: 2306 hours (96 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 f2 89 26 00 00 Error: UNC at LBA = 0x00f28926 = 15894822 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 00 c5 b2 a0 40 00 03:45:27.196 READ FPDMA QUEUED 61 00 00 00 08 00 00 00 0e 4e d8 40 00 03:45:27.195 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 00 61 33 98 40 00 03:45:27.195 WRITE FPDMA QUEUED 60 00 00 00 01 00 00 00 f2 89 26 40 00 03:45:27.195 READ FPDMA QUEUED 61 00 00 00 58 00 00 00 61 5b 88 40 00 03:45:27.194 WRITE FPDMA QUEUED Error 121 [0] occurred at disk power-on lifetime: 2306 hours (96 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 f2 89 25 00 00 Error: UNC at LBA = 0x00f28925 = 15894821 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 03 4b 54 d8 40 00 03:45:23.266 READ FPDMA QUEUED 61 00 00 00 18 00 00 00 61 34 18 40 00 03:45:23.266 WRITE FPDMA QUEUED 60 00 00 00 08 00 00 00 bb ac 80 40 00 03:45:23.265 READ FPDMA QUEUED 61 00 00 00 90 00 00 00 61 5a f8 40 00 03:45:23.265 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 00 05 8d b0 40 00 03:45:23.265 WRITE FPDMA QUEUED Error 120 [19] occurred at disk power-on lifetime: 2306 hours (96 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 f2 89 24 00 00 Error: UNC at LBA = 0x00f28924 = 15894820 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 00 d5 87 78 40 00 03:45:19.377 READ FPDMA QUEUED 60 00 00 00 01 00 00 00 f2 89 24 40 00 03:45:19.376 READ FPDMA QUEUED 61 00 00 00 08 00 00 00 c4 4a 78 40 00 03:45:19.375 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 03 d5 c0 a0 40 00 03:45:19.375 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 00 14 80 28 40 00 03:45:19.375 WRITE FPDMA QUEUED Error 119 [18] occurred at disk power-on lifetime: 2306 hours (96 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 f2 89 23 00 00 Error: UNC at LBA = 0x00f28923 = 15894819 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 01 00 00 00 f2 89 23 40 00 03:45:15.483 READ FPDMA QUEUED 61 00 00 00 08 00 00 03 d5 c0 50 40 00 03:45:15.483 WRITE FPDMA QUEUED 60 00 00 00 08 00 00 00 3d b9 f8 40 00 03:45:15.482 READ FPDMA QUEUED 61 00 00 00 28 00 00 00 61 34 18 40 00 03:45:15.482 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 03 d5 bf f0 40 00 03:45:15.481 WRITE FPDMA QUEUED Error 118 [17] occurred at disk power-on lifetime: 2306 hours (96 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 f2 89 22 00 00 Error: UNC at LBA = 0x00f28922 = 15894818 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 01 00 00 00 f2 89 22 40 00 03:45:11.602 READ FPDMA QUEUED 60 00 00 00 08 00 00 03 4b 55 90 40 00 03:45:11.582 READ FPDMA QUEUED 61 00 00 00 28 00 00 02 d6 05 78 40 00 03:45:11.581 WRITE FPDMA QUEUED 60 00 00 00 08 00 00 02 0a 0d 40 40 00 03:45:11.550 READ FPDMA QUEUED 60 00 00 00 08 00 00 02 ff 67 88 40 00 03:45:11.549 READ FPDMA QUEUED Error 117 [16] occurred at disk power-on lifetime: 2306 hours (96 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 f2 89 21 00 00 Error: WP at LBA = 0x00f28921 = 15894817 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 00 08 00 00 03 d5 bf 78 40 00 03:45:07.757 WRITE FPDMA QUEUED 60 00 00 00 08 00 00 02 0a 0d 40 40 00 03:45:07.757 READ FPDMA QUEUED 61 00 00 00 08 00 00 00 61 33 98 40 00 03:45:07.756 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 03 d5 bd e8 40 00 03:45:07.755 WRITE FPDMA QUEUED 60 00 00 00 01 00 00 00 f2 89 21 40 00 03:45:07.754 READ FPDMA QUEUED Error 116 [15] occurred at disk power-on lifetime: 2306 hours (96 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 f2 89 20 00 00 Error: UNC at LBA = 0x00f28920 = 15894816 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 01 00 00 00 f2 89 20 40 00 03:45:03.827 READ FPDMA QUEUED 60 00 00 00 01 00 00 00 f2 89 1f 40 00 03:45:03.827 READ FPDMA QUEUED 60 00 00 00 01 00 00 00 f2 89 1e 40 00 03:45:03.827 READ FPDMA QUEUED 60 00 00 00 01 00 00 00 f2 89 1d 40 00 03:45:03.826 READ FPDMA QUEUED 60 00 00 00 01 00 00 00 f2 89 1c 40 00 03:45:03.826 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1911 - # 2 Short offline Completed without error 00% 1884 - # 3 Short offline Completed without error 00% 1457 - # 4 Short offline Aborted by host 90% 914 - # 5 Short offline Completed without error 00% 913 - # 6 Short offline Completed without error 00% 364 - # 7 Short offline Completed without error 00% 350 - # 8 Short offline Completed without error 00% 261 - # 9 Short offline Completed without error 00% 36 - #10 Short offline Completed without error 00% 8 - #11 Short offline Completed without error 00% 5 - #12 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 28/38 Celsius Lifetime Min/Max Temperature: 24/46 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (16) Index Estimated Time Temperature Celsius 17 2023-07-16 05:52 33 ************** 18 2023-07-16 06:51 33 ************** 19 2023-07-16 07:50 ? - 20 2023-07-16 08:49 26 ******* 21 2023-07-16 09:48 ? - 22 2023-07-16 10:47 27 ******** 23 2023-07-16 11:46 ? - 24 2023-07-16 12:45 29 ********** 25 2023-07-16 13:44 ? - 26 2023-07-16 14:43 29 ********** 27 2023-07-16 15:42 ? - 28 2023-07-16 16:41 29 ********** 29 2023-07-16 17:40 ? - 30 2023-07-16 18:39 29 ********** 31 2023-07-16 19:38 ? - 32 2023-07-16 20:37 28 ********* 33 2023-07-16 21:36 ? - 34 2023-07-16 22:35 29 ********** 35 2023-07-16 23:34 ? - 36 2023-07-17 00:33 29 ********** 37 2023-07-17 01:32 ? - 38 2023-07-17 02:31 28 ********* 39 2023-07-17 03:30 ? - 40 2023-07-17 04:29 29 ********** 41 2023-07-17 05:28 ? - 42 2023-07-17 06:27 30 *********** 43 2023-07-17 07:26 ? - 44 2023-07-17 08:25 29 ********** 45 2023-07-17 09:24 ? - 46 2023-07-17 10:23 33 ************** 47 2023-07-17 11:22 ? - 48 2023-07-17 12:21 33 ************** 49 2023-07-17 13:20 ? - 50 2023-07-17 14:19 33 ************** 51 2023-07-17 15:18 ? - 52 2023-07-17 16:17 33 ************** 53 2023-07-17 17:16 ? - 54 2023-07-17 18:15 34 *************** 55 2023-07-17 19:14 ? - 56 2023-07-17 20:13 30 *********** 57 2023-07-17 21:12 ? - 58 2023-07-17 22:11 26 ******* 59 2023-07-17 23:10 ? - 60 2023-07-18 00:09 27 ******** 61 2023-07-18 01:08 ? - 62 2023-07-18 02:07 27 ******** 63 2023-07-18 03:06 ? - 64 2023-07-18 04:05 30 *********** 65 2023-07-18 05:04 ? - 66 2023-07-18 06:03 27 ******** 67 2023-07-18 07:02 ? - 68 2023-07-18 08:01 26 ******* 69 2023-07-18 09:00 ? - 70 2023-07-18 09:59 27 ******** 71 2023-07-18 10:58 ? - 72 2023-07-18 11:57 27 ******** 73 2023-07-18 12:56 ? - 74 2023-07-18 13:55 26 ******* 75 2023-07-18 14:54 ? - 76 2023-07-18 15:53 26 ******* 77 2023-07-18 16:52 ? - 78 2023-07-18 17:51 28 ********* 79 2023-07-18 18:50 ? - 80 2023-07-18 19:49 28 ********* 81 2023-07-18 20:48 ? - 82 2023-07-18 21:47 27 ******** 83 2023-07-18 22:46 ? - 84 2023-07-18 23:45 28 ********* 85 2023-07-19 00:44 ? - 86 2023-07-19 01:43 27 ******** 87 2023-07-19 02:42 ? - 88 2023-07-19 03:41 26 ******* 89 2023-07-19 04:40 ? - 90 2023-07-19 05:39 29 ********** 91 2023-07-19 06:38 ? - 92 2023-07-19 07:37 29 ********** 93 2023-07-19 08:36 ? - 94 2023-07-19 09:35 29 ********** 95 2023-07-19 10:34 ? - 96 2023-07-19 11:33 29 ********** 97 2023-07-19 12:32 ? - 98 2023-07-19 13:31 29 ********** 99 2023-07-19 14:30 ? - 100 2023-07-19 15:29 29 ********** 101 2023-07-19 16:28 ? - 102 2023-07-19 17:27 31 ************ 103 2023-07-19 18:26 ? - 104 2023-07-19 19:25 37 ****************** 105 2023-07-19 20:24 ? - 106 2023-07-19 21:23 37 ****************** 107 2023-07-19 22:22 41 ********************** 108 2023-07-19 23:21 38 ******************* 109 2023-07-20 00:20 ? - 110 2023-07-20 01:19 39 ******************** 111 2023-07-20 02:18 ? - 112 2023-07-20 03:17 39 ******************** 113 2023-07-20 04:16 ? - 114 2023-07-20 05:15 28 ********* 115 2023-07-20 06:14 ? - 116 2023-07-20 07:13 29 ********** 117 2023-07-20 08:12 ? - 118 2023-07-20 09:11 29 ********** 119 2023-07-20 10:10 39 ******************** 120 2023-07-20 11:09 40 ********************* 121 2023-07-20 12:08 39 ******************** 122 2023-07-20 13:07 40 ********************* 123 2023-07-20 14:06 ? - 124 2023-07-20 15:05 39 ******************** 125 2023-07-20 16:04 ? - 126 2023-07-20 17:03 39 ******************** 127 2023-07-20 18:02 ? - 0 2023-07-20 19:01 29 ********** 1 2023-07-20 20:00 39 ******************** 2 2023-07-20 20:59 39 ******************** 3 2023-07-20 21:58 ? - 4 2023-07-20 22:57 28 ********* 5 2023-07-20 23:56 39 ******************** 6 2023-07-21 00:55 40 ********************* 7 2023-07-21 01:54 38 ******************* 8 2023-07-21 02:53 38 ******************* 9 2023-07-21 03:52 39 ******************** 10 2023-07-21 04:51 39 ******************** 11 2023-07-21 05:50 ? - 12 2023-07-21 06:49 28 ********* 13 2023-07-21 07:48 42 *********************** 14 2023-07-21 08:47 42 *********************** 15 2023-07-21 09:46 ? - 16 2023-07-21 10:45 28 ********* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 14 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS


Hardware for Linux and BSD

GitHub