/dev/sda === START OF INFORMATION SECTION === Model Family: Hitachi/HGST Travelstar 5K750 Device Model: Hitachi HTS547564A9E384 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JEDOA50A User Capacity: 640 135 028 736 bytes [640 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sat Dec 30 03:24:52 2017 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 168) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 095 062 - 0 2 Throughput_Performance P-S--K 198 100 040 - 135 3 Spin_Up_Time PO---K 209 100 033 - 1 4 Start_Stop_Count -O--CK 097 097 000 - 5123 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 16 (0 2) 7 Seek_Error_Rate POSR-K 100 100 067 - 0 8 Seek_Time_Performance P-S--K 112 074 040 - 35 9 Power_On_Hours -O--CK 034 034 000 - 29218 10 Spin_Retry_Count PO--CK 100 100 060 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 3235 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 6292478230529 188 Command_Timeout -O--CK 100 098 000 - 8592228372 190 Airflow_Temperature_Cel -O---K 068 043 045 Past 32 (Min/Max 24/32) 191 G-Sense_Error_Rate -O--CK 055 055 000 - 11716 192 Power-Off_Retract_Count -O--CK 099 099 000 - 20513081 193 Load_Cycle_Count -O--CK 001 001 000 - 1764416 196 Reallocated_Event_Count -O--CK 100 100 000 - 2 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 0 223 Load_Retry_Count -O-R-K 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 1 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 [0] occurred at disk power-on lifetime: 197 hours (8 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 02 -- 51 00 00 00 00 00 00 00 00 00 00 Error: TK0NF Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 10 00 00 00 01 00 00 00 00 03 34 e0 00 03:52:41.289 RECALIBRATE [OBS-4] 91 00 00 01 3f 00 00 01 00 03 34 af 00 03:52:41.289 INITIALIZE DEVICE PARAMETERS [OBS-6] 25 d6 00 00 00 00 00 00 00 08 00 e0 04 03:52:41.088 READ DMA EXT 25 d6 00 00 01 00 00 00 00 08 00 e0 00 03:52:35.333 READ DMA EXT c4 00 d6 00 01 00 00 00 00 00 00 e0 00 03:52:35.312 READ MULTIPLE SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 16253 - # 2 Short offline Completed without error 00% 15506 - # 3 Short offline Completed: servo/seek failure 90% 15500 0 # 4 Short offline Completed without error 00% 8524 - # 5 Extended offline Completed without error 00% 4717 - # 6 Short offline Completed without error 00% 110 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 24/32 Celsius Lifetime Min/Max Temperature: 8/57 Celsius Lifetime Average Temperature: 36 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (103) Index Estimated Time Temperature Celsius 104 2017-12-30 01:17 40 ********************* ... ..( 45 skipped). .. ********************* 22 2017-12-30 02:03 40 ********************* 23 2017-12-30 02:04 39 ******************** 24 2017-12-30 02:05 39 ******************** 25 2017-12-30 02:06 39 ******************** 26 2017-12-30 02:07 40 ********************* 27 2017-12-30 02:08 39 ******************** 28 2017-12-30 02:09 40 ********************* ... ..( 6 skipped). .. ********************* 35 2017-12-30 02:16 40 ********************* 36 2017-12-30 02:17 41 ********************** ... ..( 2 skipped). .. ********************** 39 2017-12-30 02:20 41 ********************** 40 2017-12-30 02:21 42 *********************** ... ..( 2 skipped). .. *********************** 43 2017-12-30 02:24 42 *********************** 44 2017-12-30 02:25 41 ********************** ... ..( 19 skipped). .. ********************** 64 2017-12-30 02:45 41 ********************** 65 2017-12-30 02:46 42 *********************** ... ..( 4 skipped). .. *********************** 70 2017-12-30 02:51 42 *********************** 71 2017-12-30 02:52 ? - 72 2017-12-30 02:53 34 *************** 73 2017-12-30 02:54 34 *************** 74 2017-12-30 02:55 35 **************** 75 2017-12-30 02:56 35 **************** 76 2017-12-30 02:57 36 ***************** 77 2017-12-30 02:58 36 ***************** 78 2017-12-30 02:59 36 ***************** 79 2017-12-30 03:00 37 ****************** 80 2017-12-30 03:01 ? - 81 2017-12-30 03:02 24 ***** 82 2017-12-30 03:03 25 ****** ... ..( 4 skipped). .. ****** 87 2017-12-30 03:08 25 ****** 88 2017-12-30 03:09 26 ******* 89 2017-12-30 03:10 26 ******* 90 2017-12-30 03:11 27 ******** 91 2017-12-30 03:12 27 ******** 92 2017-12-30 03:13 27 ******** 93 2017-12-30 03:14 28 ********* 94 2017-12-30 03:15 29 ********** 95 2017-12-30 03:16 29 ********** 96 2017-12-30 03:17 29 ********** 97 2017-12-30 03:18 30 *********** 98 2017-12-30 03:19 31 ************ ... ..( 2 skipped). .. ************ 101 2017-12-30 03:22 31 ************ 102 2017-12-30 03:23 32 ************* 103 2017-12-30 03:24 32 ************* SCT Error Recovery Control: Read: 85 (8,5 seconds) Write: 85 (8,5 seconds) Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS