/dev/sda smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.8.0-49-generic] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: HGST Travelstar 7K1000 Device Model: HGST HTS721010A9E630 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JB0OA3T0 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 2.5 inches Device is: In smartctl database 7.3/5528 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Nov 29 19:38:25 2024 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 171) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 077 062 - 0 2 Throughput_Performance P-S--K 100 100 040 - 0 3 Spin_Up_Time PO---K 153 100 033 - 2 4 Start_Stop_Count -O--CK 099 099 000 - 1605 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate POSR-K 100 100 067 - 0 8 Seek_Time_Performance P-S--K 100 100 040 - 0 9 Power_On_Hours -O--CK 001 001 000 - 47918 10 Spin_Retry_Count PO--CK 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 1132 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 38654902301 188 Command_Timeout -O--CK 100 100 000 - 65536 190 Airflow_Temperature_Cel -O---K 064 035 045 Past 36 (Min/Max 16/36) 191 G-Sense_Error_Rate -O--CK 093 093 000 - 1915 192 Power-Off_Retract_Count -O--CK 099 099 000 - 23003487 193 Load_Cycle_Count -O--CK 001 001 000 - 1318541 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 0 223 Load_Retry_Count -O-R-K 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 22885 - # 2 Short offline Aborted by host 10% 18491 - # 3 Short offline Aborted by host 60% 5649 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 16/36 Celsius Lifetime Min/Max Temperature: 12/65 Celsius Specified Max Operating Temperature: 34 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (13) Index Estimated Time Temperature Celsius 14 2024-11-29 17:31 28 ********* 15 2024-11-29 17:32 28 ********* 16 2024-11-29 17:33 28 ********* 17 2024-11-29 17:34 29 ********** ... ..( 3 skipped). .. ********** 21 2024-11-29 17:38 29 ********** 22 2024-11-29 17:39 30 *********** 23 2024-11-29 17:40 29 ********** 24 2024-11-29 17:41 30 *********** ... ..( 3 skipped). .. *********** 28 2024-11-29 17:45 30 *********** 29 2024-11-29 17:46 31 ************ ... ..( 10 skipped). .. ************ 40 2024-11-29 17:57 31 ************ 41 2024-11-29 17:58 32 ************* 42 2024-11-29 17:59 31 ************ 43 2024-11-29 18:00 32 ************* ... ..( 7 skipped). .. ************* 51 2024-11-29 18:08 32 ************* 52 2024-11-29 18:09 33 ************** ... ..( 4 skipped). .. ************** 57 2024-11-29 18:14 33 ************** 58 2024-11-29 18:15 34 *************** ... ..( 4 skipped). .. *************** 63 2024-11-29 18:20 34 *************** 64 2024-11-29 18:21 35 **************** ... ..( 9 skipped). .. **************** 74 2024-11-29 18:31 35 **************** 75 2024-11-29 18:32 36 ***************** 76 2024-11-29 18:33 35 **************** ... ..( 2 skipped). .. **************** 79 2024-11-29 18:36 35 **************** 80 2024-11-29 18:37 36 ***************** 81 2024-11-29 18:38 35 **************** 82 2024-11-29 18:39 36 ***************** ... ..( 31 skipped). .. ***************** 114 2024-11-29 19:11 36 ***************** 115 2024-11-29 19:12 35 **************** ... ..( 18 skipped). .. **************** 6 2024-11-29 19:31 35 **************** 7 2024-11-29 19:32 36 ***************** 8 2024-11-29 19:33 35 **************** 9 2024-11-29 19:34 36 ***************** ... ..( 2 skipped). .. ***************** 12 2024-11-29 19:37 36 ***************** 13 2024-11-29 19:38 35 **************** SCT Error Recovery Control: Read: 85 (8.5 seconds) Write: 85 (8.5 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 42 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 32 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS