/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.2.6-desktop-1omv2390] (OpenMandriva Lx 7.3-3) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Intel X18-M/X25-M/X25-V G2 SSDs Device Model: INTEL SSDSA2M080G2GC Serial Number: -- LU WWN Device Id: 5 001517 ... Firmware Version: 2CV102M3 User Capacity: 80,026,361,856 bytes [80.0 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available, deterministic, zeroed Device is: In smartctl database ATA Version is: ATA/ATAPI-7 T13/1532D revision 1 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sun Apr 16 19:19:00 2023 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 1) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 1) minutes. Conveyance self-test routine recommended polling time: ( 1) minutes. SMART Attributes Data Structure revision number: 5 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 3 Spin_Up_Time -----K 100 100 000 - 0 4 Start_Stop_Count ----CK 100 100 000 - 0 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 11 9 Power_On_Hours -O--CK 100 100 000 - 8063 12 Power_Cycle_Count -O--CK 100 100 000 - 4379 192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 494 225 Host_Writes_32MiB ----CK 100 100 000 - 727174 226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 8572841 227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 1 228 Workload_Minutes -O--CK 100 100 000 - 3426430473 232 Available_Reservd_Space PO--CK 100 100 010 - 0 233 Media_Wearout_Indicator -O--CK 093 093 000 - 0 184 End-to-End_Error PO--CK 100 100 090 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 8 Comprehensive SMART error log 0x03 GPL,SL R/O 8 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (8 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Invalid Self-test Log index = 0x003c (reserved = 0x00) SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 9 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 10 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.2.6-desktop-1omv2390] (OpenMandriva Lx 7.3-3) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F3 Device Model: SAMSUNG HD502HJ Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 1AJ100E4 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sun Apr 16 19:19:00 2023 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 254 APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4680) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 78) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 0 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 084 081 025 - 5130 4 Start_Stop_Count -O--CK 096 096 000 - 4203 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 27866 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 252 252 000 - 0 12 Power_Cycle_Count -O--CK 096 096 000 - 4043 191 G-Sense_Error_Rate -O---K 029 029 000 - 724132 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 062 048 000 - 38 (Min/Max 6/52) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 17005 223 Load_Retry_Count -O--CK 252 252 000 - 0 225 Load_Cycle_Count -O--CK 100 100 000 - 4223 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xbb GPL VS 4 Device vendor specific log 0xbc GPL VS 2 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 27565 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 38 Celsius Power Cycle Min/Max Temperature: 34/38 Celsius Lifetime Min/Max Temperature: 10/52 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (79) Index Estimated Time Temperature Celsius 80 2023-04-16 08:40 42 *********************** ... ..( 3 skipped). .. *********************** 84 2023-04-16 09:00 42 *********************** 85 2023-04-16 09:05 43 ************************ 86 2023-04-16 09:10 43 ************************ 87 2023-04-16 09:15 42 *********************** 88 2023-04-16 09:20 42 *********************** 89 2023-04-16 09:25 43 ************************ 90 2023-04-16 09:30 42 *********************** ... ..( 2 skipped). .. *********************** 93 2023-04-16 09:45 42 *********************** 94 2023-04-16 09:50 28 ********* 95 2023-04-16 09:55 30 *********** 96 2023-04-16 10:00 32 ************* 97 2023-04-16 10:05 34 *************** 98 2023-04-16 10:10 36 ***************** 99 2023-04-16 10:15 37 ****************** 100 2023-04-16 10:20 38 ******************* 101 2023-04-16 10:25 39 ******************** 102 2023-04-16 10:30 39 ******************** 103 2023-04-16 10:35 40 ********************* 104 2023-04-16 10:40 40 ********************* 105 2023-04-16 10:45 41 ********************** 106 2023-04-16 10:50 41 ********************** 107 2023-04-16 10:55 41 ********************** 108 2023-04-16 11:00 42 *********************** ... ..( 11 skipped). .. *********************** 120 2023-04-16 12:00 42 *********************** 121 2023-04-16 12:05 43 ************************ ... ..( 7 skipped). .. ************************ 1 2023-04-16 12:45 43 ************************ 2 2023-04-16 12:50 34 *************** 3 2023-04-16 12:55 35 **************** 4 2023-04-16 13:00 35 **************** 5 2023-04-16 13:05 36 ***************** 6 2023-04-16 13:10 37 ****************** 7 2023-04-16 13:15 37 ****************** 8 2023-04-16 13:20 38 ******************* 9 2023-04-16 13:25 38 ******************* 10 2023-04-16 13:30 39 ******************** 11 2023-04-16 13:35 39 ******************** 12 2023-04-16 13:40 40 ********************* 13 2023-04-16 13:45 40 ********************* 14 2023-04-16 13:50 40 ********************* 15 2023-04-16 13:55 41 ********************** ... ..( 3 skipped). .. ********************** 19 2023-04-16 14:15 41 ********************** 20 2023-04-16 14:20 42 *********************** ... ..( 2 skipped). .. *********************** 23 2023-04-16 14:35 42 *********************** 24 2023-04-16 14:40 43 ************************ 25 2023-04-16 14:45 43 ************************ 26 2023-04-16 14:50 44 ************************* ... ..( 3 skipped). .. ************************* 30 2023-04-16 15:10 44 ************************* 31 2023-04-16 15:15 43 ************************ 32 2023-04-16 15:20 28 ********* 33 2023-04-16 15:25 30 *********** 34 2023-04-16 15:30 32 ************* 35 2023-04-16 15:35 33 ************** 36 2023-04-16 15:40 35 **************** 37 2023-04-16 15:45 36 ***************** 38 2023-04-16 15:50 37 ****************** 39 2023-04-16 15:55 38 ******************* 40 2023-04-16 16:00 39 ******************** 41 2023-04-16 16:05 39 ******************** 42 2023-04-16 16:10 40 ********************* 43 2023-04-16 16:15 40 ********************* 44 2023-04-16 16:20 41 ********************** ... ..( 16 skipped). .. ********************** 61 2023-04-16 17:45 41 ********************** 62 2023-04-16 17:50 40 ********************* ... ..( 7 skipped). .. ********************* 70 2023-04-16 18:30 40 ********************* 71 2023-04-16 18:35 41 ********************** 72 2023-04-16 18:40 41 ********************** 73 2023-04-16 18:45 41 ********************** 74 2023-04-16 18:50 34 *************** 75 2023-04-16 18:55 35 **************** 76 2023-04-16 19:00 36 ***************** 77 2023-04-16 19:05 37 ****************** 78 2023-04-16 19:10 37 ****************** 79 2023-04-16 19:15 38 ******************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 9 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 9 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific