/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.32-generic-2rosa-x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus Device Model: ST340014A Serial Number: -- Firmware Version: 3.06 User Capacity: 40,020,664,320 bytes [40.0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-6 T13/1410D revision 2 Local Time is: Sun Mar 12 22:03:04 2023 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 31) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 063 055 006 - 149135681 3 Spin_Up_Time PO---- 098 097 000 - 0 4 Start_Stop_Count -O--CK 099 099 020 - 1031 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 1 7 Seek_Error_Rate POSR-- 084 060 030 - 322107436 9 Power_On_Hours -O--CK 070 070 000 - 27048 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 092 092 020 - 9042 194 Temperature_Celsius -O---K 039 056 000 - 39 195 Hardware_ECC_Recovered -O-RC- 063 055 000 - 149135681 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory not supported SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 SL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 SL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x20 SL R/O 1 Streaming performance log [OBS-8] 0x21 SL R/O 1 Write stream error log 0x22 SL R/O 1 Read stream error log 0x23 SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f SL R/W 16 Host vendor specific log 0xa0 SL VS 1 Device vendor specific log 0xa1 SL VS 20 Device vendor specific log 0xa2 SL VS 101 Device vendor specific log 0xa8 SL VS 20 Device vendor specific log 0xa9 SL VS 1 Device vendor specific log SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 ATA Error Count: 254 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 254 occurred at disk power-on lifetime: 20906 hours (871 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 25 db 89 7d e0 Error: UNC at LBA = 0x007d89db = 8227291 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 00 00 89 7d e0 00 00:03:55.967 READ VERIFY SECTOR(S) 40 00 00 00 88 7d e0 00 00:03:55.962 READ VERIFY SECTOR(S) 40 00 00 00 87 7d e0 00 00:03:55.959 READ VERIFY SECTOR(S) 40 00 00 00 86 7d e0 00 00:03:56.014 READ VERIFY SECTOR(S) 40 00 00 00 85 7d e0 00 00:03:56.010 READ VERIFY SECTOR(S) Error 253 occurred at disk power-on lifetime: 20906 hours (871 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 e8 18 6f 40 e0 Error: UNC at LBA = 0x00406f18 = 4222744 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 00 00 6f 40 e0 00 00:02:44.989 READ VERIFY SECTOR(S) 40 00 00 00 6e 40 e0 00 00:02:44.986 READ VERIFY SECTOR(S) 40 00 00 00 6d 40 e0 00 00:02:44.982 READ VERIFY SECTOR(S) 40 00 00 00 6c 40 e0 00 00:02:44.979 READ VERIFY SECTOR(S) 40 00 00 00 6b 40 e0 00 00:02:44.976 READ VERIFY SECTOR(S) Error 252 occurred at disk power-on lifetime: 20906 hours (871 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 f5 0b 71 00 e0 Error: UNC at LBA = 0x0000710b = 28939 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 00 00 71 00 e0 00 00:01:36.842 READ VERIFY SECTOR(S) 40 00 00 00 70 00 e0 00 00:01:36.839 READ VERIFY SECTOR(S) 40 00 00 00 6f 00 e0 00 00:01:36.892 READ VERIFY SECTOR(S) 40 00 00 00 6e 00 e0 00 00:01:36.889 READ VERIFY SECTOR(S) 40 00 00 00 6d 00 e0 00 00:01:36.885 READ VERIFY SECTOR(S) Error 251 occurred at disk power-on lifetime: 20905 hours (871 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 00 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 01 00 00 00 e0 00 00:00:50.466 READ DMA c8 00 01 00 00 00 e0 00 00:00:50.466 READ DMA c8 00 01 00 00 00 e0 00 00:00:50.465 READ DMA c8 00 01 00 00 00 e0 00 00:00:50.314 READ DMA c8 00 01 00 00 00 e0 00 00:00:55.383 READ DMA Error 250 occurred at disk power-on lifetime: 20905 hours (871 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 00 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 01 00 00 00 e0 00 00:00:50.466 READ DMA c8 00 01 00 00 00 e0 00 00:00:50.466 READ DMA c8 00 01 00 00 00 e0 00 00:00:50.465 READ DMA c8 00 01 00 00 00 e0 00 00:00:50.314 READ DMA c8 00 01 00 00 00 e0 00 00:00:49.133 READ DMA SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) not supported /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.32-generic-2rosa-x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus Device Model: ST3120022A Serial Number: -- Firmware Version: 3.06 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-6 T13/1410D revision 2 Local Time is: Sun Mar 12 22:03:05 2023 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 055 048 006 - 9840528 3 Spin_Up_Time PO---- 098 097 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 902 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 083 060 030 - 211117961 9 Power_On_Hours -O--CK 080 080 000 - 18267 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 091 091 020 - 9778 194 Temperature_Celsius -O---K 041 062 000 - 41 195 Hardware_ECC_Recovered -O-RC- 055 048 000 - 9840528 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory not supported SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 SL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 SL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x20 SL R/O 1 Streaming performance log [OBS-8] 0x21 SL R/O 1 Write stream error log 0x22 SL R/O 1 Read stream error log 0x23 SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f SL R/W 16 Host vendor specific log 0xa0 SL VS 1 Device vendor specific log 0xa1 SL VS 20 Device vendor specific log 0xa2 SL VS 101 Device vendor specific log 0xa8 SL VS 20 Device vendor specific log 0xa9 SL VS 1 Device vendor specific log SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 ATA Error Count: 9 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 9 occurred at disk power-on lifetime: 16079 hours (669 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 00 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 01 00 00 00 e0 00 00:00:52.418 READ DMA EXT c6 00 10 00 00 00 e0 00 00:00:52.418 SET MULTIPLE MODE 91 00 3f 00 00 00 af 00 00:00:52.418 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 00 00 00 00 a0 00 00:00:52.299 RECALIBRATE [OBS-4] 00 00 01 00 00 00 00 04 00:00:41.876 NOP [Abort queued commands] Error 8 occurred at disk power-on lifetime: 16079 hours (669 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 00 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 01 00 00 00 e0 00 00:00:26.637 READ DMA EXT c6 00 10 00 00 00 e0 00 00:00:26.636 SET MULTIPLE MODE 91 00 3f 00 00 00 af 00 00:00:26.636 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 00 00 00 00 a0 00 00:00:26.517 RECALIBRATE [OBS-4] 00 00 01 00 00 00 00 04 00:00:41.876 NOP [Abort queued commands] Error 7 occurred at disk power-on lifetime: 16079 hours (669 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 00 00 00 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 01 00 00 00 e0 00 00:00:26.637 READ DMA EXT c6 00 10 00 00 00 e0 00 00:00:26.636 SET MULTIPLE MODE 91 00 3f 00 00 00 af 00 00:00:26.636 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 00 00 00 00 a0 00 00:00:26.517 RECALIBRATE [OBS-4] 00 00 00 00 00 00 00 04 00:00:26.322 NOP [Abort queued commands] Error 6 occurred at disk power-on lifetime: 14064 hours (586 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 7f 80 6d 1b e2 Error: UNC at LBA = 0x021b6d80 = 35351936 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 20 00 80 7f 6d 1b e2 00 00:03:25.209 READ SECTOR(S) 20 00 08 1f 59 e3 e1 00 00:03:25.188 READ SECTOR(S) 30 00 20 57 02 41 e1 00 00:03:25.166 WRITE SECTOR(S) 30 00 08 cf 4c 2d e1 00 00:03:25.145 WRITE SECTOR(S) 30 00 08 7f 12 f6 e0 00 00:03:25.124 WRITE SECTOR(S) Error 5 occurred at disk power-on lifetime: 14064 hours (586 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 7f 80 6d 1b e2 Error: UNC at LBA = 0x021b6d80 = 35351936 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 20 00 80 7f 6d 1b e2 00 00:03:20.989 READ SECTOR(S) 20 00 08 af ed 04 e2 00 00:03:20.987 READ SECTOR(S) 20 00 08 ef 40 e3 e1 00 00:03:20.986 READ SECTOR(S) 30 00 08 7f 12 f6 e0 00 00:03:20.965 WRITE SECTOR(S) 30 00 08 6f ef d0 e0 00 00:03:20.944 WRITE SECTOR(S) SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) not supported