/dev/sda smartctl 7.2 2020-12-30 r5155 [i686-linux-4.9.0-279-antix.1-486-smp] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue EIDE Device Model: WDC WD1200BEVE-00A0HT0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 11.01A11 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.5 Local Time is: Sun Jan 16 07:55:16 2022 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4560) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 57) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x2037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 159 158 021 - 1041 4 Start_Stop_Count -O--CK 100 100 000 - 477 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 098 098 000 - 1511 10 Spin_Retry_Count PO--CK 100 100 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 311 192 Power-Off_Retract_Count -O--CK 200 200 000 - 42 193 Load_Cycle_Count -O--CK 200 200 000 - 842 194 Temperature_Celsius -O---K 111 094 000 - 32 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate P--R-- 100 253 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 32/35 Celsius Lifetime Min/Max Temperature: 32/49 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: 1/85 Celsius Temperature History Size (Index): 128 (95) Index Estimated Time Temperature Celsius 96 2022-01-16 05:48 38 ******************* ... ..( 4 skipped). .. ******************* 101 2022-01-16 05:53 38 ******************* 102 2022-01-16 05:54 39 ******************** ... ..( 24 skipped). .. ******************** 127 2022-01-16 06:19 39 ******************** 0 2022-01-16 06:20 40 ********************* ... ..( 2 skipped). .. ********************* 3 2022-01-16 06:23 40 ********************* 4 2022-01-16 06:24 39 ******************** ... ..( 6 skipped). .. ******************** 11 2022-01-16 06:31 39 ******************** 12 2022-01-16 06:32 ? - 13 2022-01-16 06:33 17 - 14 2022-01-16 06:34 18 - 15 2022-01-16 06:35 18 - 16 2022-01-16 06:36 18 - 17 2022-01-16 06:37 19 - 18 2022-01-16 06:38 ? - 19 2022-01-16 06:39 20 * 20 2022-01-16 06:40 ? - 21 2022-01-16 06:41 21 ** 22 2022-01-16 06:42 21 ** 23 2022-01-16 06:43 22 *** 24 2022-01-16 06:44 ? - 25 2022-01-16 06:45 22 *** 26 2022-01-16 06:46 22 *** 27 2022-01-16 06:47 22 *** 28 2022-01-16 06:48 23 **** 29 2022-01-16 06:49 ? - 30 2022-01-16 06:50 24 ***** ... ..( 5 skipped). .. ***** 36 2022-01-16 06:56 24 ***** 37 2022-01-16 06:57 ? - 38 2022-01-16 06:58 24 ***** 39 2022-01-16 06:59 24 ***** 40 2022-01-16 07:00 ? - 41 2022-01-16 07:01 25 ****** 42 2022-01-16 07:02 26 ******* 43 2022-01-16 07:03 26 ******* 44 2022-01-16 07:04 27 ******** 45 2022-01-16 07:05 27 ******** 46 2022-01-16 07:06 28 ********* 47 2022-01-16 07:07 29 ********** 48 2022-01-16 07:08 29 ********** 49 2022-01-16 07:09 30 *********** 50 2022-01-16 07:10 30 *********** 51 2022-01-16 07:11 31 ************ 52 2022-01-16 07:12 31 ************ 53 2022-01-16 07:13 31 ************ 54 2022-01-16 07:14 32 ************* 55 2022-01-16 07:15 33 ************** 56 2022-01-16 07:16 32 ************* 57 2022-01-16 07:17 32 ************* 58 2022-01-16 07:18 33 ************** 59 2022-01-16 07:19 33 ************** 60 2022-01-16 07:20 33 ************** 61 2022-01-16 07:21 34 *************** 62 2022-01-16 07:22 34 *************** 63 2022-01-16 07:23 34 *************** 64 2022-01-16 07:24 35 **************** ... ..( 14 skipped). .. **************** 79 2022-01-16 07:39 35 **************** 80 2022-01-16 07:40 36 ***************** ... ..( 2 skipped). .. ***************** 83 2022-01-16 07:43 36 ***************** 84 2022-01-16 07:44 ? - 85 2022-01-16 07:45 ? - 86 2022-01-16 07:46 35 **************** 87 2022-01-16 07:47 34 *************** 88 2022-01-16 07:48 34 *************** 89 2022-01-16 07:49 33 ************** 90 2022-01-16 07:50 33 ************** 91 2022-01-16 07:51 32 ************* ... ..( 3 skipped). .. ************* 95 2022-01-16 07:55 32 ************* SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) not supported