/dev/sda === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA (AF) Device Model: WDC WD3200BPVT-00JJ5T0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 320,072,933,376 bytes [320 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Fri Mar 29 04:24:17 2019 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 7380) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 76) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 144 143 021 - 1800 4 Start_Stop_Count -O--CK 099 099 000 - 1480 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 045 045 000 - 40373 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 205 192 Power-Off_Retract_Count -O--CK 200 200 000 - 123 193 Load_Cycle_Count -O--CK 001 001 000 - 1546280 194 Temperature_Celsius -O---K 115 103 000 - 28 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: 27/29 Celsius Lifetime Min/Max Temperature: 0/40 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (62) Index Estimated Time Temperature Celsius 63 2019-03-29 02:17 28 ********* ... ..( 3 skipped). .. ********* 67 2019-03-29 02:21 28 ********* 68 2019-03-29 02:22 29 ********** 69 2019-03-29 02:23 29 ********** 70 2019-03-29 02:24 29 ********** 71 2019-03-29 02:25 30 *********** 72 2019-03-29 02:26 29 ********** ... ..( 8 skipped). .. ********** 81 2019-03-29 02:35 29 ********** 82 2019-03-29 02:36 28 ********* ... ..( 2 skipped). .. ********* 85 2019-03-29 02:39 28 ********* 86 2019-03-29 02:40 27 ******** ... ..( 8 skipped). .. ******** 95 2019-03-29 02:49 27 ******** 96 2019-03-29 02:50 28 ********* ... ..( 6 skipped). .. ********* 103 2019-03-29 02:57 28 ********* 104 2019-03-29 02:58 ? - 105 2019-03-29 02:59 23 **** 106 2019-03-29 03:00 ? - 107 2019-03-29 03:01 25 ****** 108 2019-03-29 03:02 25 ****** 109 2019-03-29 03:03 26 ******* 110 2019-03-29 03:04 ? - 111 2019-03-29 03:05 28 ********* 112 2019-03-29 03:06 ? - 113 2019-03-29 03:07 29 ********** 114 2019-03-29 03:08 ? - 115 2019-03-29 03:09 29 ********** 116 2019-03-29 03:10 ? - 117 2019-03-29 03:11 26 ******* 118 2019-03-29 03:12 ? - 119 2019-03-29 03:13 27 ******** 120 2019-03-29 03:14 ? - 121 2019-03-29 03:15 27 ******** ... ..( 3 skipped). .. ******** 125 2019-03-29 03:19 27 ******** 126 2019-03-29 03:20 28 ********* 127 2019-03-29 03:21 28 ********* 0 2019-03-29 03:22 29 ********** 1 2019-03-29 03:23 29 ********** 2 2019-03-29 03:24 28 ********* 3 2019-03-29 03:25 29 ********** 4 2019-03-29 03:26 29 ********** 5 2019-03-29 03:27 29 ********** 6 2019-03-29 03:28 28 ********* ... ..( 11 skipped). .. ********* 18 2019-03-29 03:40 28 ********* 19 2019-03-29 03:41 27 ******** ... ..( 12 skipped). .. ******** 32 2019-03-29 03:54 27 ******** 33 2019-03-29 03:55 28 ********* ... ..( 8 skipped). .. ********* 42 2019-03-29 04:04 28 ********* 43 2019-03-29 04:05 29 ********** 44 2019-03-29 04:06 29 ********** 45 2019-03-29 04:07 28 ********* ... ..( 16 skipped). .. ********* 62 2019-03-29 04:24 28 ********* SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 25 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 19 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 4493 Vendor specific