/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.10.188-antix.1-amd64-smp] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar P7K500 Device Model: Hitachi HDP725050GLA360 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: GM4OA52A User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed Jan 31 19:51:01 2024 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 128 APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 7890) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 131) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 131 131 054 - 148 3 Spin_Up_Time POS--- 122 122 024 - 323 (Average 304) 4 Start_Stop_Count -O--C- 100 100 000 - 3913 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 131 131 020 - 29 9 Power_On_Hours -O--C- 097 097 000 - 21526 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 3704 192 Power-Off_Retract_Count -O--CK 097 097 000 - 4045 193 Load_Cycle_Count -O--C- 097 097 000 - 4045 194 Temperature_Celsius -O---- 200 200 000 - 30 (Min/Max 11/44) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 21509 - # 2 Short offline Completed without error 00% 21505 - # 3 Short offline Completed without error 00% 21497 - # 4 Short offline Completed without error 00% 21488 - # 5 Extended offline Aborted by host 90% 12015 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 30 Celsius Power Cycle Min/Max Temperature: 28/31 Celsius Lifetime Min/Max Temperature: 11/44 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (4) Index Estimated Time Temperature Celsius 5 2024-01-31 17:44 29 ********** ... ..( 9 skipped). .. ********** 15 2024-01-31 17:54 29 ********** 16 2024-01-31 17:55 30 *********** 17 2024-01-31 17:56 29 ********** ... ..( 34 skipped). .. ********** 52 2024-01-31 18:31 29 ********** 53 2024-01-31 18:32 30 *********** 54 2024-01-31 18:33 30 *********** 55 2024-01-31 18:34 29 ********** 56 2024-01-31 18:35 29 ********** 57 2024-01-31 18:36 30 *********** 58 2024-01-31 18:37 30 *********** 59 2024-01-31 18:38 30 *********** 60 2024-01-31 18:39 31 ************ 61 2024-01-31 18:40 30 *********** ... ..( 10 skipped). .. *********** 72 2024-01-31 18:51 30 *********** 73 2024-01-31 18:52 29 ********** 74 2024-01-31 18:53 29 ********** 75 2024-01-31 18:54 29 ********** 76 2024-01-31 18:55 30 *********** 77 2024-01-31 18:56 29 ********** 78 2024-01-31 18:57 30 *********** ... ..( 17 skipped). .. *********** 96 2024-01-31 19:15 30 *********** 97 2024-01-31 19:16 31 ************ ... ..( 3 skipped). .. ************ 101 2024-01-31 19:20 31 ************ 102 2024-01-31 19:21 30 *********** 103 2024-01-31 19:22 30 *********** 104 2024-01-31 19:23 30 *********** 105 2024-01-31 19:24 31 ************ ... ..( 4 skipped). .. ************ 110 2024-01-31 19:29 31 ************ 111 2024-01-31 19:30 30 *********** ... ..( 20 skipped). .. *********** 4 2024-01-31 19:51 30 *********** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 13 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.10.188-antix.1-amd64-smp] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar P7K500 Device Model: Hitachi HDP725050GLA360 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: GM4OA52A User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed Jan 31 19:51:01 2024 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 128 APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 7890) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 131) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 131 131 054 - 146 3 Spin_Up_Time POS--- 127 127 024 - 296 (Average 310) 4 Start_Stop_Count -O--C- 098 098 000 - 11257 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 131 131 020 - 29 9 Power_On_Hours -O--C- 098 098 000 - 18979 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 3699 192 Power-Off_Retract_Count -O--CK 091 091 000 - 11643 193 Load_Cycle_Count -O--C- 091 091 000 - 11643 194 Temperature_Celsius -O---- 193 193 000 - 31 (Min/Max 9/41) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 18961 - # 2 Short offline Completed without error 00% 18958 - # 3 Short offline Completed without error 00% 18950 - # 4 Short offline Completed without error 00% 18941 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 28/31 Celsius Lifetime Min/Max Temperature: 9/41 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (13) Index Estimated Time Temperature Celsius 14 2024-01-31 17:44 30 *********** ... ..( 8 skipped). .. *********** 23 2024-01-31 17:53 30 *********** 24 2024-01-31 17:54 31 ************ 25 2024-01-31 17:55 30 *********** ... ..( 3 skipped). .. *********** 29 2024-01-31 17:59 30 *********** 30 2024-01-31 18:00 29 ********** ... ..( 12 skipped). .. ********** 43 2024-01-31 18:13 29 ********** 44 2024-01-31 18:14 30 *********** ... ..( 13 skipped). .. *********** 58 2024-01-31 18:28 30 *********** 59 2024-01-31 18:29 29 ********** ... ..( 13 skipped). .. ********** 73 2024-01-31 18:43 29 ********** 74 2024-01-31 18:44 30 *********** ... ..( 3 skipped). .. *********** 78 2024-01-31 18:48 30 *********** 79 2024-01-31 18:49 31 ************ ... ..( 9 skipped). .. ************ 89 2024-01-31 18:59 31 ************ 90 2024-01-31 19:00 30 *********** ... ..( 4 skipped). .. *********** 95 2024-01-31 19:05 30 *********** 96 2024-01-31 19:06 29 ********** ... ..( 6 skipped). .. ********** 103 2024-01-31 19:13 29 ********** 104 2024-01-31 19:14 30 *********** ... ..( 4 skipped). .. *********** 109 2024-01-31 19:19 30 *********** 110 2024-01-31 19:20 31 ************ ... ..( 9 skipped). .. ************ 120 2024-01-31 19:30 31 ************ 121 2024-01-31 19:31 30 *********** ... ..( 5 skipped). .. *********** 127 2024-01-31 19:37 30 *********** 0 2024-01-31 19:38 29 ********** ... ..( 5 skipped). .. ********** 6 2024-01-31 19:44 29 ********** 7 2024-01-31 19:45 30 *********** ... ..( 4 skipped). .. *********** 12 2024-01-31 19:50 30 *********** 13 2024-01-31 19:51 31 ************ SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 13 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS