/dev/sda === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 850 EVO 250GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EMT01B6Q User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Jun 21 11:16:08 2018 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 133) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 095 095 000 - 21620 12 Power_Cycle_Count -O--CK 099 099 000 - 71 177 Wear_Leveling_Count PO--C- 078 078 000 - 453 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 061 042 000 - 39 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 43 241 Total_LBAs_Written -O--CK 099 099 000 - 33258391219 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: SCT command executing in background (5) Current Temperature: 39 Celsius Power Cycle Min/Max Temperature: 27/58 Celsius Lifetime Min/Max Temperature: 0/70 Celsius Under/Over Temperature Limit Count: 4294967295/4294901760 SMART Status: 0xffff (Reserved) SCT Temperature History Version: 3 (Unknown, should be 2) Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (44) Index Estimated Time Temperature Celsius 45 2018-06-20 14:00 38 ******************* 46 2018-06-20 14:10 38 ******************* 47 2018-06-20 14:20 37 ****************** ... ..( 10 skipped). .. ****************** 58 2018-06-20 16:10 37 ****************** 59 2018-06-20 16:20 38 ******************* 60 2018-06-20 16:30 37 ****************** ... ..( 4 skipped). .. ****************** 65 2018-06-20 17:20 37 ****************** 66 2018-06-20 17:30 38 ******************* 67 2018-06-20 17:40 38 ******************* 68 2018-06-20 17:50 37 ****************** 69 2018-06-20 18:00 37 ****************** 70 2018-06-20 18:10 38 ******************* ... ..( 17 skipped). .. ******************* 88 2018-06-20 21:10 38 ******************* 89 2018-06-20 21:20 37 ****************** ... ..( 6 skipped). .. ****************** 96 2018-06-20 22:30 37 ****************** 97 2018-06-20 22:40 38 ******************* ... ..( 5 skipped). .. ******************* 103 2018-06-20 23:40 38 ******************* 104 2018-06-20 23:50 37 ****************** 105 2018-06-21 00:00 37 ****************** 106 2018-06-21 00:10 38 ******************* 107 2018-06-21 00:20 38 ******************* 108 2018-06-21 00:30 37 ****************** ... ..( 14 skipped). .. ****************** 123 2018-06-21 03:00 37 ****************** 124 2018-06-21 03:10 38 ******************* 125 2018-06-21 03:20 37 ****************** ... ..( 13 skipped). .. ****************** 11 2018-06-21 05:40 37 ****************** 12 2018-06-21 05:50 36 ***************** ... ..( 2 skipped). .. ***************** 15 2018-06-21 06:20 36 ***************** 16 2018-06-21 06:30 37 ****************** 17 2018-06-21 06:40 36 ***************** 18 2018-06-21 06:50 37 ****************** 19 2018-06-21 07:00 36 ***************** 20 2018-06-21 07:10 37 ****************** 21 2018-06-21 07:20 36 ***************** 22 2018-06-21 07:30 37 ****************** 23 2018-06-21 07:40 37 ****************** 24 2018-06-21 07:50 36 ***************** 25 2018-06-21 08:00 37 ****************** ... ..( 7 skipped). .. ****************** 33 2018-06-21 09:20 37 ****************** 34 2018-06-21 09:30 40 ********************* 35 2018-06-21 09:40 41 ********************** 36 2018-06-21 09:50 40 ********************* 37 2018-06-21 10:00 39 ******************** 38 2018-06-21 10:10 40 ********************* 39 2018-06-21 10:20 40 ********************* 40 2018-06-21 10:30 39 ******************** 41 2018-06-21 10:40 38 ******************* 42 2018-06-21 10:50 38 ******************* 43 2018-06-21 11:00 38 ******************* 44 2018-06-21 11:10 39 ******************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 88 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 87 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb === START OF INFORMATION SECTION === Model Family: SandForce Driven SSDs Device Model: Corsair CSSD-F60GB2 Serial Number: -- LU WWN Device Id: 5 000000 ... Firmware Version: 1.1 User Capacity: 60,022,480,896 bytes [60.0 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Jun 21 11:16:08 2018 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown (0x100) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7f) SMART execute Offline immediate. Auto Offline data collection on/off support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 48) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 118 100 050 - 0/204289279 5 Retired_Block_Count PO--CK 094 094 003 - 576 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 63417h+32m+44.270s 12 Power_Cycle_Count -O--CK 100 100 000 - 280 171 Program_Fail_Count ------ 000 000 000 - 0 172 Erase_Fail_Count ------ 000 000 000 - 0 174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 201 177 Wear_Range_Delta ------ 000 000 --- - 1 181 Program_Fail_Count ------ 000 000 000 - 0 182 Erase_Fail_Count ------ 000 000 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 194 Temperature_Celsius -O---K 035 049 000 - 35 (Min/Max 0/49) 195 ECC_Uncorr_Error_Count --SRC- 118 100 000 - 0/204289279 196 Reallocated_Event_Count PO--CK 100 100 003 - 0 231 SSD_Life_Left PO--C- 090 090 010 - 1 233 SandForce_Internal ------ 000 000 000 - 17664 234 SandForce_Internal ------ 000 000 000 - 20864 241 Lifetime_Writes_GiB -O--CK 000 000 000 - 20864 242 Lifetime_Reads_GiB -O--CK 000 000 000 - 80896 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xb7 GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log not supported SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Self-test routine in progress 90% 52941 - # 2 Extended offline Self-test routine in progress 90% 27111 - # 3 Extended offline Self-test routine in progress 90% 23635 - # 4 Extended offline Self-test routine in progress 90% 23002 - # 5 Short offline Self-test routine in progress 90% 8001 - # 6 Conveyance offline Self-test routine in progress 90% 8000 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) SCT Support Level: 1 Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 20/41 Celsius Lifetime Min/Max Temperature: 0/49 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: ?/ ? Celsius Min/Max Temperature Limit: ?/ ? Celsius Temperature History Size (Index): 478 (384) Index Estimated Time Temperature Celsius 385 2018-06-21 03:19 34 *************** ... ..(149 skipped). .. *************** 57 2018-06-21 05:49 34 *************** 58 2018-06-21 05:50 33 ************** ... ..( 36 skipped). .. ************** 95 2018-06-21 06:27 33 ************** 96 2018-06-21 06:28 34 *************** ... ..(181 skipped). .. *************** 278 2018-06-21 09:30 34 *************** 279 2018-06-21 09:31 35 **************** ... ..( 34 skipped). .. **************** 314 2018-06-21 10:06 35 **************** 315 2018-06-21 10:07 36 ***************** ... ..( 21 skipped). .. ***************** 337 2018-06-21 10:29 36 ***************** 338 2018-06-21 10:30 35 **************** ... ..( 44 skipped). .. **************** 383 2018-06-21 11:15 35 **************** 384 2018-06-21 11:16 34 *************** SCT Error Recovery Control: Read: 256 (25.6 seconds) Write: 256 (25.6 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x000a 2 66 Device-to-host register FISes sent due to a COMRESET