/dev/sda smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.14.2-desktop-3omv2590] (OpenMandriva Lx 7.4-1) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint M7 Device Model: SAMSUNG HM320II Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 2AC101C4 User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Form Factor: 2.5 inches Device is: In smartctl database ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 1.5 Gb/s Local Time is: Mon May 19 18:52:33 2025 +04 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 25) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 5220) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 87) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 1 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 091 090 025 - 2950 4 Start_Stop_Count -O--CK 093 093 000 - 7273 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 11260 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 302 12 Power_Cycle_Count -O--CK 093 093 000 - 7159 191 G-Sense_Error_Rate -O---K 100 100 000 - 6888 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 064 054 000 - 28 (Min/Max 16/46) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 901 223 Load_Retry_Count -O--CK 100 100 000 - 302 225 Load_Cycle_Count -O--CK 001 001 000 - 18985515 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xbb GPL VS 4 Device vendor specific log 0xbc GPL VS 2 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Aborted by host 90% 11259 - # 2 Short offline Completed without error 00% 11259 - # 3 Short offline Interrupted (host reset) 90% 11255 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Aborted_by_host [90% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 27 Celsius Power Cycle Min/Max Temperature: 27/27 Celsius Lifetime Min/Max Temperature: 19/66 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (108) Index Estimated Time Temperature Celsius 109 2025-05-19 08:15 28 ********* ... ..( 10 skipped). .. ********* 120 2025-05-19 09:10 28 ********* 121 2025-05-19 09:15 29 ********** 122 2025-05-19 09:20 30 *********** 123 2025-05-19 09:25 31 ************ 124 2025-05-19 09:30 30 *********** 125 2025-05-19 09:35 30 *********** 126 2025-05-19 09:40 31 ************ 127 2025-05-19 09:45 31 ************ 0 2025-05-19 09:50 32 ************* ... ..( 4 skipped). .. ************* 5 2025-05-19 10:15 32 ************* 6 2025-05-19 10:20 27 ******** 7 2025-05-19 10:25 29 ********** ... ..( 5 skipped). .. ********** 13 2025-05-19 10:55 29 ********** 14 2025-05-19 11:00 30 *********** 15 2025-05-19 11:05 29 ********** 16 2025-05-19 11:10 30 *********** 17 2025-05-19 11:15 29 ********** 18 2025-05-19 11:20 30 *********** ... ..( 48 skipped). .. *********** 67 2025-05-19 15:25 30 *********** 68 2025-05-19 15:30 31 ************ ... ..( 3 skipped). .. ************ 72 2025-05-19 15:50 31 ************ 73 2025-05-19 15:55 32 ************* 74 2025-05-19 16:00 33 ************** ... ..( 2 skipped). .. ************** 77 2025-05-19 16:15 33 ************** 78 2025-05-19 16:20 32 ************* 79 2025-05-19 16:25 32 ************* 80 2025-05-19 16:30 33 ************** 81 2025-05-19 16:35 34 *************** 82 2025-05-19 16:40 34 *************** 83 2025-05-19 16:45 34 *************** 84 2025-05-19 16:50 28 ********* 85 2025-05-19 16:55 30 *********** 86 2025-05-19 17:00 31 ************ 87 2025-05-19 17:05 32 ************* 88 2025-05-19 17:10 32 ************* 89 2025-05-19 17:15 31 ************ 90 2025-05-19 17:20 31 ************ 91 2025-05-19 17:25 31 ************ 92 2025-05-19 17:30 33 ************** 93 2025-05-19 17:35 33 ************** 94 2025-05-19 17:40 33 ************** 95 2025-05-19 17:45 32 ************* 96 2025-05-19 17:50 31 ************ 97 2025-05-19 17:55 30 *********** 98 2025-05-19 18:00 30 *********** 99 2025-05-19 18:05 29 ********** 100 2025-05-19 18:10 29 ********** 101 2025-05-19 18:15 29 ********** 102 2025-05-19 18:20 31 ************ 103 2025-05-19 18:25 33 ************** ... ..( 2 skipped). .. ************** 106 2025-05-19 18:40 33 ************** 107 2025-05-19 18:45 34 *************** 108 2025-05-19 18:50 27 ******** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 2 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific