/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.14-desktop-1omv4002] (OpenMandriva Lx 7.2-2) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Samsung SSD 870 EVO 250GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: SVT01B6Q User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Nov 12 20:15:54 2021 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 099 099 000 - 8 12 Power_Cycle_Count -O--CK 099 099 000 - 17 177 Wear_Leveling_Count PO--C- 100 100 000 - 0 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 066 061 000 - 34 195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 235 Unknown_Attribute -O--C- 099 099 000 - 5 241 Total_LBAs_Written -O--CK 099 099 000 - 188073428 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 256 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 33/40 Celsius Lifetime Min/Max Temperature: 25/40 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (72) Index Estimated Time Temperature Celsius 73 2021-11-11 23:00 ? - ... ..( 53 skipped). .. - 127 2021-11-12 08:00 ? - 0 2021-11-12 08:10 40 ********************* 1 2021-11-12 08:20 ? - ... ..( 6 skipped). .. - 8 2021-11-12 09:30 ? - 9 2021-11-12 09:40 34 *************** 10 2021-11-12 09:50 39 ******************** 11 2021-11-12 10:00 38 ******************* 12 2021-11-12 10:10 ? - 13 2021-11-12 10:20 ? - 14 2021-11-12 10:30 ? - 15 2021-11-12 10:40 34 *************** 16 2021-11-12 10:50 35 **************** 17 2021-11-12 11:00 35 **************** 18 2021-11-12 11:10 ? - 19 2021-11-12 11:20 30 *********** 20 2021-11-12 11:30 30 *********** 21 2021-11-12 11:40 32 ************* 22 2021-11-12 11:50 32 ************* 23 2021-11-12 12:00 33 ************** 24 2021-11-12 12:10 32 ************* 25 2021-11-12 12:20 34 *************** 26 2021-11-12 12:30 ? - 27 2021-11-12 12:40 ? - 28 2021-11-12 12:50 30 *********** 29 2021-11-12 13:00 29 ********** 30 2021-11-12 13:10 30 *********** 31 2021-11-12 13:20 30 *********** 32 2021-11-12 13:30 30 *********** 33 2021-11-12 13:40 31 ************ 34 2021-11-12 13:50 30 *********** 35 2021-11-12 14:00 30 *********** 36 2021-11-12 14:10 29 ********** ... ..( 4 skipped). .. ********** 41 2021-11-12 15:00 29 ********** 42 2021-11-12 15:10 ? - 43 2021-11-12 15:20 30 *********** 44 2021-11-12 15:30 33 ************** 45 2021-11-12 15:40 30 *********** 46 2021-11-12 15:50 36 ***************** 47 2021-11-12 16:00 ? - 48 2021-11-12 16:10 30 *********** 49 2021-11-12 16:20 31 ************ 50 2021-11-12 16:30 32 ************* 51 2021-11-12 16:40 30 *********** 52 2021-11-12 16:50 32 ************* 53 2021-11-12 17:00 32 ************* 54 2021-11-12 17:10 32 ************* 55 2021-11-12 17:20 ? - 56 2021-11-12 17:30 27 ******** 57 2021-11-12 17:40 30 *********** 58 2021-11-12 17:50 33 ************** 59 2021-11-12 18:00 31 ************ 60 2021-11-12 18:10 31 ************ 61 2021-11-12 18:20 ? - 62 2021-11-12 18:30 ? - 63 2021-11-12 18:40 27 ******** 64 2021-11-12 18:50 ? - 65 2021-11-12 19:00 31 ************ 66 2021-11-12 19:10 31 ************ 67 2021-11-12 19:20 32 ************* 68 2021-11-12 19:30 ? - 69 2021-11-12 19:40 25 ****** 70 2021-11-12 19:50 ? - 71 2021-11-12 20:00 ? - 72 2021-11-12 20:10 33 ************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 17 --- Lifetime Power-On Resets 0x01 0x010 4 8 --- Power-on Hours 0x01 0x018 6 188074612 --- Logical Sectors Written 0x01 0x020 6 2626825 --- Number of Write Commands 0x01 0x028 6 135611342 --- Logical Sectors Read 0x01 0x030 6 1983174 --- Number of Read Commands 0x01 0x038 6 3340000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 34 --- Current Temperature 0x05 0x020 1 40 --- Highest Temperature 0x05 0x028 1 25 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 67 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC