/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.1-desktop-1omv2290] (OpenMandriva Lx 7.3-2) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Mobile Device Model: WDC WD7500BPVX-22JC3T0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 750,156,374,016 bytes [750 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Jan 8 19:33:44 2023 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 96 (intermediate level with standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (13620) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 154) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 187 179 021 - 1625 4 Start_Stop_Count -O--CK 056 056 000 - 44425 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 097 097 000 - 2892 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 096 096 000 - 4872 191 G-Sense_Error_Rate -O--CK 096 096 000 - 4 192 Power-Off_Retract_Count -O--CK 199 199 000 - 840 193 Load_Cycle_Count -O--CK 182 182 000 - 56596 194 Temperature_Celsius -O---K 115 092 000 - 32 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 38 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 31/32 Celsius Lifetime Min/Max Temperature: 0/55 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (8) Index Estimated Time Temperature Celsius 9 2023-01-08 17:26 34 *************** 10 2023-01-08 17:27 34 *************** 11 2023-01-08 17:28 33 ************** 12 2023-01-08 17:29 ? - 13 2023-01-08 17:30 33 ************** 14 2023-01-08 17:31 33 ************** 15 2023-01-08 17:32 33 ************** 16 2023-01-08 17:33 ? - 17 2023-01-08 17:34 33 ************** 18 2023-01-08 17:35 33 ************** 19 2023-01-08 17:36 ? - 20 2023-01-08 17:37 33 ************** 21 2023-01-08 17:38 33 ************** 22 2023-01-08 17:39 33 ************** 23 2023-01-08 17:40 32 ************* 24 2023-01-08 17:41 32 ************* 25 2023-01-08 17:42 32 ************* 26 2023-01-08 17:43 ? - 27 2023-01-08 17:44 32 ************* 28 2023-01-08 17:45 32 ************* 29 2023-01-08 17:46 ? - 30 2023-01-08 17:47 32 ************* 31 2023-01-08 17:48 32 ************* 32 2023-01-08 17:49 32 ************* 33 2023-01-08 17:50 ? - 34 2023-01-08 17:51 32 ************* 35 2023-01-08 17:52 ? - 36 2023-01-08 17:53 31 ************ 37 2023-01-08 17:54 ? - 38 2023-01-08 17:55 31 ************ 39 2023-01-08 17:56 31 ************ 40 2023-01-08 17:57 32 ************* 41 2023-01-08 17:58 33 ************** 42 2023-01-08 17:59 34 *************** 43 2023-01-08 18:00 34 *************** 44 2023-01-08 18:01 ? - 45 2023-01-08 18:02 34 *************** 46 2023-01-08 18:03 34 *************** 47 2023-01-08 18:04 ? - 48 2023-01-08 18:05 34 *************** 49 2023-01-08 18:06 34 *************** 50 2023-01-08 18:07 35 **************** ... ..( 4 skipped). .. **************** 55 2023-01-08 18:12 35 **************** 56 2023-01-08 18:13 36 ***************** ... ..( 3 skipped). .. ***************** 60 2023-01-08 18:17 36 ***************** 61 2023-01-08 18:18 ? - 62 2023-01-08 18:19 36 ***************** 63 2023-01-08 18:20 36 ***************** 64 2023-01-08 18:21 ? - 65 2023-01-08 18:22 36 ***************** 66 2023-01-08 18:23 36 ***************** 67 2023-01-08 18:24 ? - 68 2023-01-08 18:25 36 ***************** 69 2023-01-08 18:26 ? - 70 2023-01-08 18:27 33 ************** 71 2023-01-08 18:28 32 ************* 72 2023-01-08 18:29 ? - 73 2023-01-08 18:30 32 ************* 74 2023-01-08 18:31 31 ************ 75 2023-01-08 18:32 ? - 76 2023-01-08 18:33 31 ************ 77 2023-01-08 18:34 31 ************ 78 2023-01-08 18:35 ? - 79 2023-01-08 18:36 31 ************ 80 2023-01-08 18:37 ? - 81 2023-01-08 18:38 31 ************ 82 2023-01-08 18:39 31 ************ 83 2023-01-08 18:40 ? - 84 2023-01-08 18:41 31 ************ 85 2023-01-08 18:42 ? - 86 2023-01-08 18:43 30 *********** ... ..( 2 skipped). .. *********** 89 2023-01-08 18:46 30 *********** 90 2023-01-08 18:47 ? - 91 2023-01-08 18:48 30 *********** 92 2023-01-08 18:49 31 ************ 93 2023-01-08 18:50 31 ************ 94 2023-01-08 18:51 ? - 95 2023-01-08 18:52 31 ************ 96 2023-01-08 18:53 31 ************ 97 2023-01-08 18:54 ? - 98 2023-01-08 18:55 31 ************ 99 2023-01-08 18:56 ? - 100 2023-01-08 18:57 29 ********** 101 2023-01-08 18:58 28 ********* 102 2023-01-08 18:59 29 ********** 103 2023-01-08 19:00 30 *********** 104 2023-01-08 19:01 30 *********** 105 2023-01-08 19:02 31 ************ 106 2023-01-08 19:03 ? - 107 2023-01-08 19:04 31 ************ 108 2023-01-08 19:05 ? - 109 2023-01-08 19:06 31 ************ 110 2023-01-08 19:07 ? - 111 2023-01-08 19:08 31 ************ 112 2023-01-08 19:09 31 ************ 113 2023-01-08 19:10 ? - 114 2023-01-08 19:11 31 ************ 115 2023-01-08 19:12 ? - 116 2023-01-08 19:13 31 ************ 117 2023-01-08 19:14 31 ************ 118 2023-01-08 19:15 31 ************ 119 2023-01-08 19:16 ? - 120 2023-01-08 19:17 31 ************ 121 2023-01-08 19:18 31 ************ 122 2023-01-08 19:19 31 ************ 123 2023-01-08 19:20 ? - 124 2023-01-08 19:21 31 ************ 125 2023-01-08 19:22 32 ************* 126 2023-01-08 19:23 ? - 127 2023-01-08 19:24 32 ************* 0 2023-01-08 19:25 ? - 1 2023-01-08 19:26 32 ************* 2 2023-01-08 19:27 32 ************* 3 2023-01-08 19:28 ? - 4 2023-01-08 19:29 32 ************* 5 2023-01-08 19:30 32 ************* 6 2023-01-08 19:31 31 ************ 7 2023-01-08 19:32 ? - 8 2023-01-08 19:33 31 ************ SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 586 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 696 Vendor specific /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.1-desktop-1omv2290] (OpenMandriva Lx 7.3-2) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Plextor M3/M5/M6/M7 Series SSDs Device Model: PLEXTOR PX-128M6M Serial Number: -- LU WWN Device Id: 0 000000 ... Add. Product Id: HM702070 Firmware Version: 1.01 User Capacity: 128,035,676,160 bytes [128 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available Device is: In smartctl database ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 4a SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Jan 8 19:33:44 2023 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 10) seconds. Offline data collection capabilities: (0x15) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 5 Reallocated_Sector_Ct PO---- 100 100 000 - 0 9 Power_On_Hours -O---- 100 100 000 - 779 12 Power_Cycle_Count PO---- 100 100 000 - 4898 170 Unknown_Plextor_Attrib -O--CK 100 100 000 - 0 171 Unknown_Plextor_Attrib PO---- 100 100 000 - 0 172 Unknown_Plextor_Attrib PO---- 100 100 000 - 0 173 Unknown_Plextor_Attrib PO---- 100 100 000 - 91313 174 Unknown_Plextor_Attrib PO---- 100 100 000 - 129 175 Program_Fail_Count_Chip PO---- 000 000 000 - 0 176 Erase_Fail_Count_Chip PO---- 100 100 000 - 0 177 Wear_Leveling_Count PO---- 100 100 000 - 91313 178 Used_Rsvd_Blk_Cnt_Chip PO---- 100 100 000 - 0 179 Used_Rsvd_Blk_Cnt_Tot PO---- 000 000 000 - 0 180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 704 181 Program_Fail_Cnt_Total PO---- 100 100 000 - 0 182 Erase_Fail_Count_Total PO---- 100 100 000 - 0 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 001 001 000 - 30540242 187 Reported_Uncorrect PO---- 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count PO---- 100 100 000 - 129 195 Hardware_ECC_Recovered PO---- 100 100 000 - 0 196 Reallocated_Event_Count PO---- 100 100 000 - 0 198 Offline_Uncorrectable PO---- 100 100 000 - 0 199 UDMA_CRC_Error_Count PO---- 100 100 000 - 0 232 Available_Reservd_Space PO---- 100 100 010 - 0 233 Media_Wearout_Indicator PO---- 100 100 000 - 5707 241 Host_Writes_32MiB PO---- 100 100 000 - 269607 242 Host_Reads_32MiB PO---- 100 100 000 - 619269 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 0 SMART Log Directory Version 0 Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 2 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 1 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: ? Celsius Power Cycle Min/Max Temperature: ?/ ? Celsius Lifetime Min/Max Temperature: ?/ ? Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 0 minutes Temperature Logging Interval: 0 minutes Min/Max recommended Temperature: ?/ ? Celsius Min/Max Temperature Limit: ?/ ? Celsius Temperature History Size (Index): 128 (0) Index Estimated Time Temperature Celsius 1 2023-01-08 17:26 ? - ... ..(126 skipped). .. - 0 2023-01-08 19:33 ? - SCT Error Recovery Control: Read: 2 (0.2 seconds) Write: 2 (0.2 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC