/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-32-amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba 3.5" DT01ACA... Desktop HDD Device Model: TOSHIBA DT01ACA300 Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: MX6OABB0 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Apr 9 19:59:12 2025 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (22652) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 378) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 139 139 054 - 70 3 Spin_Up_Time POS--- 135 135 024 - 424 (Average 425) 4 Start_Stop_Count -O--C- 100 100 000 - 279 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 124 124 020 - 33 9 Power_On_Hours -O--C- 091 091 000 - 63922 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 275 192 Power-Off_Retract_Count -O--CK 098 098 000 - 2499 193 Load_Cycle_Count -O--C- 098 098 000 - 2499 194 Temperature_Celsius -O---- 171 171 000 - 35 (Min/Max 17/52) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 24/35 Celsius Lifetime Min/Max Temperature: 17/52 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (79) Index Estimated Time Temperature Celsius 80 2025-04-09 17:52 39 ******************** ... ..( 5 skipped). .. ******************** 86 2025-04-09 17:58 39 ******************** 87 2025-04-09 17:59 38 ******************* ... ..( 30 skipped). .. ******************* 118 2025-04-09 18:30 38 ******************* 119 2025-04-09 18:31 39 ******************** 120 2025-04-09 18:32 39 ******************** 121 2025-04-09 18:33 38 ******************* 122 2025-04-09 18:34 39 ******************** 123 2025-04-09 18:35 39 ******************** 124 2025-04-09 18:36 39 ******************** 125 2025-04-09 18:37 38 ******************* 126 2025-04-09 18:38 39 ******************** 127 2025-04-09 18:39 39 ******************** 0 2025-04-09 18:40 39 ******************** 1 2025-04-09 18:41 38 ******************* 2 2025-04-09 18:42 39 ******************** ... ..( 19 skipped). .. ******************** 22 2025-04-09 19:02 39 ******************** 23 2025-04-09 19:03 ? - 24 2025-04-09 19:04 23 **** 25 2025-04-09 19:05 24 ***** 26 2025-04-09 19:06 24 ***** 27 2025-04-09 19:07 25 ****** 28 2025-04-09 19:08 25 ****** 29 2025-04-09 19:09 26 ******* 30 2025-04-09 19:10 26 ******* 31 2025-04-09 19:11 27 ******** 32 2025-04-09 19:12 27 ******** 33 2025-04-09 19:13 28 ********* 34 2025-04-09 19:14 ? - 35 2025-04-09 19:15 22 *** 36 2025-04-09 19:16 23 **** 37 2025-04-09 19:17 23 **** 38 2025-04-09 19:18 24 ***** 39 2025-04-09 19:19 25 ****** 40 2025-04-09 19:20 25 ****** 41 2025-04-09 19:21 26 ******* 42 2025-04-09 19:22 26 ******* 43 2025-04-09 19:23 27 ******** 44 2025-04-09 19:24 27 ******** 45 2025-04-09 19:25 28 ********* 46 2025-04-09 19:26 28 ********* 47 2025-04-09 19:27 29 ********** 48 2025-04-09 19:28 29 ********** 49 2025-04-09 19:29 30 *********** 50 2025-04-09 19:30 30 *********** 51 2025-04-09 19:31 30 *********** 52 2025-04-09 19:32 31 ************ 53 2025-04-09 19:33 31 ************ 54 2025-04-09 19:34 ? - 55 2025-04-09 19:35 24 ***** 56 2025-04-09 19:36 25 ****** 57 2025-04-09 19:37 26 ******* 58 2025-04-09 19:38 26 ******* 59 2025-04-09 19:39 27 ******** 60 2025-04-09 19:40 28 ********* 61 2025-04-09 19:41 28 ********* 62 2025-04-09 19:42 28 ********* 63 2025-04-09 19:43 29 ********** 64 2025-04-09 19:44 29 ********** 65 2025-04-09 19:45 30 *********** 66 2025-04-09 19:46 30 *********** 67 2025-04-09 19:47 31 ************ 68 2025-04-09 19:48 31 ************ 69 2025-04-09 19:49 31 ************ 70 2025-04-09 19:50 32 ************* 71 2025-04-09 19:51 32 ************* 72 2025-04-09 19:52 32 ************* 73 2025-04-09 19:53 33 ************** 74 2025-04-09 19:54 33 ************** 75 2025-04-09 19:55 34 *************** ... ..( 2 skipped). .. *************** 78 2025-04-09 19:58 34 *************** 79 2025-04-09 19:59 35 **************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 275 --- Lifetime Power-On Resets 0x01 0x010 4 63922 --- Power-on Hours 0x01 0x018 6 539946266 --- Logical Sectors Written 0x01 0x020 6 460767 --- Number of Write Commands 0x01 0x028 6 9255361 --- Logical Sectors Read 0x01 0x030 6 197643 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 63873 --- Spindle Motor Power-on Hours 0x03 0x010 4 63873 --- Head Flying Hours 0x03 0x018 4 2499 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 2 --- Read Recovery Attempts 0x03 0x030 4 22 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 35 --- Current Temperature 0x05 0x010 1 35 N-- Average Short Term Temperature 0x05 0x018 1 35 N-- Average Long Term Temperature 0x05 0x020 1 52 --- Highest Temperature 0x05 0x028 1 17 --- Lowest Temperature 0x05 0x030 1 50 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 45 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 2686 --- Number of Hardware Resets 0x06 0x010 4 1132 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-32-amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba 3.5" DT01ACA... Desktop HDD Device Model: TOSHIBA DT01ACA300 Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: MX6OABB0 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Apr 9 19:59:14 2025 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (21791) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 364) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 139 139 054 - 70 3 Spin_Up_Time POS--- 134 134 024 - 427 (Average 427) 4 Start_Stop_Count -O--C- 100 100 000 - 299 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 124 124 020 - 33 9 Power_On_Hours -O--C- 091 091 000 - 64519 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 288 192 Power-Off_Retract_Count -O--CK 098 098 000 - 2644 193 Load_Cycle_Count -O--C- 098 098 000 - 2644 194 Temperature_Celsius -O---- 171 171 000 - 35 (Min/Max 17/56) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 23/35 Celsius Lifetime Min/Max Temperature: 17/56 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (16) Index Estimated Time Temperature Celsius 17 2025-04-09 17:52 36 ***************** 18 2025-04-09 17:53 37 ****************** 19 2025-04-09 17:54 36 ***************** ... ..( 49 skipped). .. ***************** 69 2025-04-09 18:44 36 ***************** 70 2025-04-09 18:45 37 ****************** 71 2025-04-09 18:46 37 ****************** 72 2025-04-09 18:47 37 ****************** 73 2025-04-09 18:48 36 ***************** ... ..( 13 skipped). .. ***************** 87 2025-04-09 19:02 36 ***************** 88 2025-04-09 19:03 ? - 89 2025-04-09 19:04 23 **** 90 2025-04-09 19:05 25 ****** 91 2025-04-09 19:06 25 ****** 92 2025-04-09 19:07 25 ****** 93 2025-04-09 19:08 26 ******* 94 2025-04-09 19:09 26 ******* 95 2025-04-09 19:10 27 ******** 96 2025-04-09 19:11 27 ******** 97 2025-04-09 19:12 28 ********* 98 2025-04-09 19:13 28 ********* 99 2025-04-09 19:14 ? - 100 2025-04-09 19:15 23 **** 101 2025-04-09 19:16 24 ***** 102 2025-04-09 19:17 24 ***** 103 2025-04-09 19:18 25 ****** 104 2025-04-09 19:19 25 ****** 105 2025-04-09 19:20 26 ******* 106 2025-04-09 19:21 26 ******* 107 2025-04-09 19:22 27 ******** 108 2025-04-09 19:23 27 ******** 109 2025-04-09 19:24 28 ********* 110 2025-04-09 19:25 28 ********* 111 2025-04-09 19:26 29 ********** 112 2025-04-09 19:27 29 ********** 113 2025-04-09 19:28 30 *********** 114 2025-04-09 19:29 30 *********** 115 2025-04-09 19:30 30 *********** 116 2025-04-09 19:31 31 ************ 117 2025-04-09 19:32 31 ************ 118 2025-04-09 19:33 31 ************ 119 2025-04-09 19:34 ? - 120 2025-04-09 19:35 25 ****** 121 2025-04-09 19:36 26 ******* 122 2025-04-09 19:37 27 ******** 123 2025-04-09 19:38 27 ******** 124 2025-04-09 19:39 27 ******** 125 2025-04-09 19:40 28 ********* 126 2025-04-09 19:41 28 ********* 127 2025-04-09 19:42 29 ********** 0 2025-04-09 19:43 29 ********** 1 2025-04-09 19:44 29 ********** 2 2025-04-09 19:45 30 *********** 3 2025-04-09 19:46 30 *********** 4 2025-04-09 19:47 31 ************ 5 2025-04-09 19:48 31 ************ 6 2025-04-09 19:49 32 ************* 7 2025-04-09 19:50 32 ************* 8 2025-04-09 19:51 32 ************* 9 2025-04-09 19:52 33 ************** ... ..( 2 skipped). .. ************** 12 2025-04-09 19:55 33 ************** 13 2025-04-09 19:56 34 *************** 14 2025-04-09 19:57 34 *************** 15 2025-04-09 19:58 34 *************** 16 2025-04-09 19:59 35 **************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 288 --- Lifetime Power-On Resets 0x01 0x010 4 64519 --- Power-on Hours 0x01 0x018 6 28883010938 --- Logical Sectors Written 0x01 0x020 6 338600185 --- Number of Write Commands 0x01 0x028 6 24332379871 --- Logical Sectors Read 0x01 0x030 6 139400668 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 64107 --- Spindle Motor Power-on Hours 0x03 0x010 4 64107 --- Head Flying Hours 0x03 0x018 4 2644 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 20 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 4 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 35 --- Current Temperature 0x05 0x010 1 33 N-- Average Short Term Temperature 0x05 0x018 1 34 N-- Average Long Term Temperature 0x05 0x020 1 56 --- Highest Temperature 0x05 0x028 1 17 --- Lowest Temperature 0x05 0x030 1 54 N-- Highest Average Short Term Temperature 0x05 0x038 1 24 N-- Lowest Average Short Term Temperature 0x05 0x040 1 49 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 1320 --- Number of Hardware Resets 0x06 0x010 4 884 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdc smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-32-amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD10EZEX-00RKKA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 80.00A80 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Apr 9 19:59:17 2025 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (10320) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 119) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x30b5) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 175 172 021 - 2216 4 Start_Stop_Count -O--CK 099 099 000 - 1703 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 094 094 000 - 4697 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1210 192 Power-Off_Retract_Count -O--CK 200 200 000 - 204 193 Load_Cycle_Count -O--CK 200 200 000 - 1498 194 Temperature_Celsius -O---K 108 095 000 - 35 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 187 000 - 19 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 5 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 5 [4] occurred at disk power-on lifetime: 4298 hours (179 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 00 00 00 00 c2 4f 53 a0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d8 00 00 00 00 00 c2 4f 01 a0 00 00:00:11.659 SMART ENABLE OPERATIONS ec 00 20 00 3f 00 00 00 00 00 01 a0 00 00:00:11.658 IDENTIFY DEVICE 10 00 20 00 3f 00 00 00 00 08 00 a0 00 00:00:11.653 RECALIBRATE [OBS-4] 91 00 20 00 3f 00 00 0f 00 08 00 af 00 00:00:11.653 INITIALIZE DEVICE PARAMETERS [OBS-6] ec 00 20 00 00 00 00 00 00 08 00 a0 00 00:00:11.650 IDENTIFY DEVICE Error 4 [3] occurred at disk power-on lifetime: 4298 hours (179 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 00 00 00 00 c2 4f 53 a0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d8 00 00 00 00 00 c2 4f 01 a0 00 00:00:11.195 SMART ENABLE OPERATIONS ec 00 20 00 3f 00 00 00 00 00 01 a0 00 00:00:11.194 IDENTIFY DEVICE 10 00 20 00 3f 00 00 00 00 08 00 a0 00 00:00:11.189 RECALIBRATE [OBS-4] 91 00 20 00 3f 00 00 0f 00 08 00 af 00 00:00:11.189 INITIALIZE DEVICE PARAMETERS [OBS-6] ec 00 20 00 00 00 00 00 00 08 00 a0 00 00:00:11.187 IDENTIFY DEVICE Error 3 [2] occurred at disk power-on lifetime: 4294 hours (178 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 00 00 00 00 c2 4f 53 00 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d8 00 00 00 00 00 c2 4f 01 00 08 00:00:36.974 SMART ENABLE OPERATIONS ec 00 00 00 01 00 00 00 00 00 00 00 08 00:00:36.965 IDENTIFY DEVICE ec 00 00 00 01 00 00 00 00 00 00 00 08 00:00:36.964 IDENTIFY DEVICE 60 00 20 00 10 00 00 00 00 00 08 40 08 00:00:35.206 READ FPDMA QUEUED 60 00 08 00 08 00 00 00 00 00 00 40 08 00:00:35.206 READ FPDMA QUEUED Error 2 [1] occurred at disk power-on lifetime: 4289 hours (178 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 00 00 00 00 c2 4f 53 00 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d8 00 00 00 00 00 c2 4f 01 00 08 00:00:36.057 SMART ENABLE OPERATIONS ec 00 00 00 01 00 00 00 00 00 00 00 08 00:00:36.043 IDENTIFY DEVICE ec 00 00 00 01 00 00 00 00 00 00 00 08 00:00:36.041 IDENTIFY DEVICE 60 00 20 00 c8 00 00 00 00 00 08 40 08 00:00:33.844 READ FPDMA QUEUED 60 00 08 00 c0 00 00 00 00 00 00 40 08 00:00:33.844 READ FPDMA QUEUED Error 1 [0] occurred at disk power-on lifetime: 4180 hours (174 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 00 00 00 00 c2 4f 53 a0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d8 00 00 00 00 00 c2 4f 01 a0 00 00:00:10.570 SMART ENABLE OPERATIONS ec 00 20 00 3f 00 00 00 00 00 01 a0 00 00:00:10.569 IDENTIFY DEVICE 10 00 20 00 3f 00 00 00 00 00 01 a0 00 00:00:10.569 RECALIBRATE [OBS-4] 91 00 20 00 3f 00 00 0f 00 00 01 af 00 00:00:10.569 INITIALIZE DEVICE PARAMETERS [OBS-6] ec 00 00 00 00 00 00 00 00 00 01 a0 00 00:00:10.567 IDENTIFY DEVICE SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 22/35 Celsius Lifetime Min/Max Temperature: 15/45 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (355) Index Estimated Time Temperature Celsius 356 2025-04-09 12:02 38 ******************* ... ..(139 skipped). .. ******************* 18 2025-04-09 14:22 38 ******************* 19 2025-04-09 14:23 ? - 20 2025-04-09 14:24 20 * 21 2025-04-09 14:25 20 * 22 2025-04-09 14:26 22 *** 23 2025-04-09 14:27 23 **** 24 2025-04-09 14:28 23 **** 25 2025-04-09 14:29 24 ***** 26 2025-04-09 14:30 25 ****** 27 2025-04-09 14:31 26 ******* 28 2025-04-09 14:32 26 ******* 29 2025-04-09 14:33 26 ******* 30 2025-04-09 14:34 27 ******** 31 2025-04-09 14:35 ? - 32 2025-04-09 14:36 19 - 33 2025-04-09 14:37 20 * 34 2025-04-09 14:38 21 ** 35 2025-04-09 14:39 22 *** 36 2025-04-09 14:40 23 **** 37 2025-04-09 14:41 23 **** 38 2025-04-09 14:42 24 ***** 39 2025-04-09 14:43 25 ****** 40 2025-04-09 14:44 26 ******* 41 2025-04-09 14:45 26 ******* 42 2025-04-09 14:46 26 ******* 43 2025-04-09 14:47 27 ******** 44 2025-04-09 14:48 27 ******** 45 2025-04-09 14:49 28 ********* 46 2025-04-09 14:50 28 ********* 47 2025-04-09 14:51 29 ********** 48 2025-04-09 14:52 30 *********** 49 2025-04-09 14:53 30 *********** 50 2025-04-09 14:54 30 *********** 51 2025-04-09 14:55 ? - 52 2025-04-09 14:56 22 *** 53 2025-04-09 14:57 23 **** 54 2025-04-09 14:58 23 **** 55 2025-04-09 14:59 24 ***** 56 2025-04-09 15:00 25 ****** 57 2025-04-09 15:01 26 ******* 58 2025-04-09 15:02 26 ******* 59 2025-04-09 15:03 27 ******** 60 2025-04-09 15:04 27 ******** 61 2025-04-09 15:05 28 ********* 62 2025-04-09 15:06 28 ********* 63 2025-04-09 15:07 29 ********** 64 2025-04-09 15:08 30 *********** 65 2025-04-09 15:09 30 *********** 66 2025-04-09 15:10 30 *********** 67 2025-04-09 15:11 31 ************ 68 2025-04-09 15:12 31 ************ 69 2025-04-09 15:13 32 ************* 70 2025-04-09 15:14 32 ************* 71 2025-04-09 15:15 33 ************** 72 2025-04-09 15:16 33 ************** 73 2025-04-09 15:17 33 ************** 74 2025-04-09 15:18 34 *************** 75 2025-04-09 15:19 34 *************** 76 2025-04-09 15:20 35 **************** 77 2025-04-09 15:21 35 **************** 78 2025-04-09 15:22 36 ***************** ... ..( 49 skipped). .. ***************** 128 2025-04-09 16:12 36 ***************** 129 2025-04-09 16:13 37 ****************** ... ..( 64 skipped). .. ****************** 194 2025-04-09 17:18 37 ****************** 195 2025-04-09 17:19 38 ******************* ... ..(159 skipped). .. ******************* 355 2025-04-09 19:59 38 ******************* SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 1555 Vendor specific