/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.16.7-desktop-1omv4003] (OpenMandriva Lx 7.2-2) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA (AF) Device Model: WDC WD7500BPVT-55HXZT3 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 750,156,374,016 bytes [750 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Fri Jul 15 19:57:25 2022 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (15900) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 156) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 176 176 021 - 2175 4 Start_Stop_Count -O--CK 094 094 000 - 6430 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 083 083 000 - 12626 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 094 094 000 - 6155 191 G-Sense_Error_Rate -O--CK 001 001 000 - 3272 192 Power-Off_Retract_Count -O--CK 200 200 000 - 562 193 Load_Cycle_Count -O--CK 001 001 000 - 1211173 194 Temperature_Celsius -O---K 106 094 000 - 41 (Min/Max 41/42) 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 2414 - # 2 Conveyance offline Aborted by host 90% 2414 - # 3 Short offline Completed without error 00% 2414 - # 4 Extended offline Aborted by host 90% 2414 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 41 Celsius Power Cycle Min/Max Temperature: 41/42 Celsius Lifetime Min/Max Temperature: 0/53 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (81) Index Estimated Time Temperature Celsius 82 2022-07-15 17:50 41 ********************** ... ..( 2 skipped). .. ********************** 85 2022-07-15 17:53 41 ********************** 86 2022-07-15 17:54 42 *********************** ... ..( 6 skipped). .. *********************** 93 2022-07-15 18:01 42 *********************** 94 2022-07-15 18:02 41 ********************** ... ..( 8 skipped). .. ********************** 103 2022-07-15 18:11 41 ********************** 104 2022-07-15 18:12 ? - 105 2022-07-15 18:13 41 ********************** 106 2022-07-15 18:14 ? - 107 2022-07-15 18:15 41 ********************** 108 2022-07-15 18:16 ? - 109 2022-07-15 18:17 41 ********************** 110 2022-07-15 18:18 ? - 111 2022-07-15 18:19 41 ********************** 112 2022-07-15 18:20 ? - 113 2022-07-15 18:21 41 ********************** ... ..( 51 skipped). .. ********************** 37 2022-07-15 19:13 41 ********************** 38 2022-07-15 19:14 ? - 39 2022-07-15 19:15 41 ********************** ... ..( 2 skipped). .. ********************** 42 2022-07-15 19:18 41 ********************** 43 2022-07-15 19:19 40 ********************* 44 2022-07-15 19:20 ? - 45 2022-07-15 19:21 40 ********************* ... ..( 3 skipped). .. ********************* 49 2022-07-15 19:25 40 ********************* 50 2022-07-15 19:26 39 ******************** ... ..( 4 skipped). .. ******************** 55 2022-07-15 19:31 39 ******************** 56 2022-07-15 19:32 40 ********************* ... ..( 7 skipped). .. ********************* 64 2022-07-15 19:40 40 ********************* 65 2022-07-15 19:41 41 ********************** ... ..( 2 skipped). .. ********************** 68 2022-07-15 19:44 41 ********************** 69 2022-07-15 19:45 42 *********************** ... ..( 2 skipped). .. *********************** 72 2022-07-15 19:48 42 *********************** 73 2022-07-15 19:49 ? - 74 2022-07-15 19:50 42 *********************** 75 2022-07-15 19:51 42 *********************** 76 2022-07-15 19:52 42 *********************** 77 2022-07-15 19:53 41 ********************** ... ..( 3 skipped). .. ********************** 81 2022-07-15 19:57 41 ********************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 465 Vendor specific