/dev/nvme0n1 smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.12.6-amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: SOLIDIGM SSDPFKNU512GZ Serial Number: -- Firmware Version: 002C PCI Vendor/Subsystem ID: 0x025e IEEE OUI Identifier: 0xc8d6b7 Controller ID: 1 NVMe Version: 1.4 Number of Namespaces: 1 Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] Namespace 1 Formatted LBA Size: 512 Local Time is: Tue Jan 14 15:50:08 2025 CET Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x00df): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Verify Log Page Attributes (0x1f): S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Pers_Ev_Lg Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 77 Celsius Critical Comp. Temp. Threshold: 80 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 3.50W - - 0 0 0 0 0 0 1 + 2.70W - - 1 1 1 1 4000 5000 2 + 2.00W - - 2 2 2 2 22000 37000 3 - 0.0250W - - 3 3 3 3 225 2000 4 - 0.0040W - - 4 4 4 4 3000 11999 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 1 - 4096 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 27 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 167,915 [85.9 GB] Data Units Written: 486,268 [248 GB] Host Read Commands: 2,724,912 Host Write Commands: 5,102,445 Controller Busy Time: 38 Power Cycles: 24 Power On Hours: 5 Unsafe Shutdowns: 6 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Error Information (NVMe Log 0x01, 16 of 256 entries) No Errors Logged Read Self-test Log failed: Invalid Field in Command (0x002) /dev/sda smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.12.6-amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint M7E (AF) Device Model: SAMSUNG HM641JI Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 2AJ10001 User Capacity: 640,135,028,736 bytes [640 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database 7.3/5528 ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Tue Jan 14 15:50:08 2025 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Write SCT (Get) Feature Control Command failed: Read of ATA output registers not implemented [JMicron] Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 9420) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 157) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 17 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 089 088 025 - 3527 4 Start_Stop_Count -O--CK 083 083 000 - 17653 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 26542 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 044 044 000 - 56632 12 Power_Cycle_Count -O--CK 087 087 000 - 13495 191 G-Sense_Error_Rate -O---K 001 001 000 - 1177402 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 064 041 000 - 26 (Min/Max 11/59) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 1 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 12455 223 Load_Retry_Count -O--CK 044 044 000 - 56632 225 Load_Cycle_Count -O--CK 028 028 000 - 727773 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented [JMicron] Read GP Log Directory failed SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x09 SL R/W 1 Selective self-test log 0x80-0x9f SL R/W 16 Host vendor specific log 0xe0 SL R/W 1 SCT Command/Status 0xe1 SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 No Errors Logged SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 26 Celsius Power Cycle Min/Max Temperature: 19/26 Celsius Lifetime Min/Max Temperature: 12/63 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (24) Index Estimated Time Temperature Celsius 25 2025-01-14 05:15 26 ******* 26 2025-01-14 05:20 27 ******** ... ..( 5 skipped). .. ******** 32 2025-01-14 05:50 27 ******** 33 2025-01-14 05:55 24 ***** 34 2025-01-14 06:00 26 ******* 35 2025-01-14 06:05 28 ********* 36 2025-01-14 06:10 30 *********** 37 2025-01-14 06:15 32 ************* 38 2025-01-14 06:20 33 ************** 39 2025-01-14 06:25 34 *************** ... ..( 6 skipped). .. *************** 46 2025-01-14 07:00 34 *************** 47 2025-01-14 07:05 33 ************** 48 2025-01-14 07:10 32 ************* 49 2025-01-14 07:15 31 ************ 50 2025-01-14 07:20 31 ************ 51 2025-01-14 07:25 30 *********** ... ..( 3 skipped). .. *********** 55 2025-01-14 07:45 30 *********** 56 2025-01-14 07:50 20 * 57 2025-01-14 07:55 23 **** 58 2025-01-14 08:00 25 ****** 59 2025-01-14 08:05 27 ******** 60 2025-01-14 08:10 28 ********* 61 2025-01-14 08:15 30 *********** 62 2025-01-14 08:20 31 ************ 63 2025-01-14 08:25 32 ************* 64 2025-01-14 08:30 33 ************** 65 2025-01-14 08:35 32 ************* 66 2025-01-14 08:40 31 ************ ... ..( 5 skipped). .. ************ 72 2025-01-14 09:10 31 ************ 73 2025-01-14 09:15 28 ********* 74 2025-01-14 09:20 30 *********** 75 2025-01-14 09:25 32 ************* 76 2025-01-14 09:30 34 *************** 77 2025-01-14 09:35 36 ***************** 78 2025-01-14 09:40 37 ****************** 79 2025-01-14 09:45 38 ******************* 80 2025-01-14 09:50 39 ******************** 81 2025-01-14 09:55 40 ********************* 82 2025-01-14 10:00 41 ********************** 83 2025-01-14 10:05 42 *********************** 84 2025-01-14 10:10 42 *********************** 85 2025-01-14 10:15 38 ******************* 86 2025-01-14 10:20 39 ******************** 87 2025-01-14 10:25 40 ********************* 88 2025-01-14 10:30 41 ********************** 89 2025-01-14 10:35 42 *********************** 90 2025-01-14 10:40 43 ************************ 91 2025-01-14 10:45 43 ************************ 92 2025-01-14 10:50 43 ************************ 93 2025-01-14 10:55 44 ************************* 94 2025-01-14 11:00 44 ************************* 95 2025-01-14 11:05 44 ************************* 96 2025-01-14 11:10 26 ******* 97 2025-01-14 11:15 28 ********* 98 2025-01-14 11:20 32 ************* 99 2025-01-14 11:25 34 *************** 100 2025-01-14 11:30 37 ****************** 101 2025-01-14 11:35 39 ******************** 102 2025-01-14 11:40 40 ********************* 103 2025-01-14 11:45 42 *********************** 104 2025-01-14 11:50 43 ************************ 105 2025-01-14 11:55 44 ************************* 106 2025-01-14 12:00 44 ************************* 107 2025-01-14 12:05 44 ************************* 108 2025-01-14 12:10 45 ************************** 109 2025-01-14 12:15 45 ************************** 110 2025-01-14 12:20 44 ************************* 111 2025-01-14 12:25 42 *********************** 112 2025-01-14 12:30 43 ************************ 113 2025-01-14 12:35 24 ***** 114 2025-01-14 12:40 26 ******* 115 2025-01-14 12:45 28 ********* 116 2025-01-14 12:50 29 ********** 117 2025-01-14 12:55 31 ************ 118 2025-01-14 13:00 26 ******* 119 2025-01-14 13:05 28 ********* 120 2025-01-14 13:10 29 ********** 121 2025-01-14 13:15 29 ********** 122 2025-01-14 13:20 30 *********** 123 2025-01-14 13:25 30 *********** 124 2025-01-14 13:30 29 ********** 125 2025-01-14 13:35 29 ********** 126 2025-01-14 13:40 29 ********** 127 2025-01-14 13:45 30 *********** 0 2025-01-14 13:50 30 *********** 1 2025-01-14 13:55 21 ** 2 2025-01-14 14:00 25 ****** 3 2025-01-14 14:05 27 ******** 4 2025-01-14 14:10 28 ********* 5 2025-01-14 14:15 29 ********** ... ..( 3 skipped). .. ********** 9 2025-01-14 14:35 29 ********** 10 2025-01-14 14:40 28 ********* 11 2025-01-14 14:45 29 ********** 12 2025-01-14 14:50 28 ********* 13 2025-01-14 14:55 28 ********* 14 2025-01-14 15:00 28 ********* 15 2025-01-14 15:05 29 ********** ... ..( 5 skipped). .. ********** 21 2025-01-14 15:35 29 ********** 22 2025-01-14 15:40 28 ********* 23 2025-01-14 15:45 28 ********* 24 2025-01-14 15:50 26 ******* Write SCT (Get) Error Recovery Control Command failed: Read of ATA output registers not implemented [JMicron] SCT (Get) Error Recovery Control command failed Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented [JMicron] Read SATA Phy Event Counters failed