/dev/nvme0n1 smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.13.1-arch1-1] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: KINGSTON SKC3000S512G Serial Number: -- Firmware Version: EIFK31.6 PCI Vendor/Subsystem ID: 0x2646 IEEE OUI Identifier: 0x0026b7 Total NVM Capacity: 512,110,190,592 [512 GB] Unallocated NVM Capacity: 0 Controller ID: 1 NVMe Version: 1.4 Number of Namespaces: 1 Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 0026b7 ... Local Time is: Tue Feb 4 23:01:03 2025 CST Firmware Updates (0x12): 1 Slot, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005d): Comp DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x08): Telmtry_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 84 Celsius Critical Comp. Temp. Threshold: 89 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 8.80W - - 0 0 0 0 0 0 1 + 7.10W - - 1 1 1 1 0 0 2 + 5.20W - - 2 2 2 2 0 0 3 - 0.0620W - - 3 3 3 3 2500 7500 4 - 0.0620W - - 4 4 4 4 2500 7500 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 1 - 4096 0 1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 24 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 252,291 [129 GB] Data Units Written: 326,167 [166 GB] Host Read Commands: 3,454,674 Host Write Commands: 1,037,986 Controller Busy Time: 12 Power Cycles: 143 Power On Hours: 45 Unsafe Shutdowns: 50 Media and Data Integrity Errors: 0 Error Information Log Entries: 4,732 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 2: 54 Celsius Error Information (NVMe Log 0x01, 16 of 63 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS Message 0 4732 0 0x0000 0x4004 0x028 0 0 - Invalid Field in Command 1 4731 0 0x0017 0x4004 - 0 0 - Invalid Field in Command Read Self-test Log failed: Invalid Field in Command (0x2002) /dev/sda smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.13.1-arch1-1] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Silicon Motion based SSDs Device Model: ADATA SU630 Serial Number: -- LU WWN Device Id: 0 000000 ... Firmware Version: XD0R3C0A User Capacity: 960,197,124,096 bytes [960 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic Device is: In smartctl database 7.3/5528 ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Feb 4 23:01:03 2025 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Disabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 1) seconds. Offline data collection capabilities: (0x59) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 100 100 000 - 13 12 Power_Cycle_Count -O--CK 100 100 000 - 144 160 Uncorrectable_Error_Cnt -O--CK 100 100 050 - 0 161 Valid_Spare_Block_Cnt -O--CK 100 100 050 - 100 163 Initial_Bad_Block_Count -O--CK 100 100 000 - 68 164 Total_Erase_Count -O--CK 100 100 000 - 4 165 Max_Erase_Count -O--CK 100 100 000 - 0 166 Min_Erase_Count -O--CK 100 100 000 - 0 167 Average_Erase_Count -O--CK 100 100 000 - 0 148 Total_SLC_Erase_Ct -O--CK 100 100 000 - 13 149 Max_SLC_Erase_Ct -O--CK 100 100 000 - 1 150 Min_SLC_Erase_Ct -O--CK 100 100 000 - 0 151 Average_SLC_Erase_Ct -O--CK 100 100 000 - 0 159 DRAM_1_Bit_Error_Count -O--CK 100 100 000 - 0 168 Max_Erase_Count_of_Spec -O--CK 100 100 000 - 1 169 Remaining_Lifetime_Perc -O--CK 100 100 000 - 100 177 Wear_Leveling_Count -O--CK 100 100 000 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 70 194 Temperature_Celsius -O--CK 100 100 000 - 13 195 Hardware_ECC_Recovered -O--CK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 232 Available_Reservd_Space -O--CK 100 100 000 - 100 241 Host_Writes_32MiB -O--CK 100 100 000 - 0 242 Host_Reads_32MiB -O--CK 100 100 000 - 9 245 TLC_Writes_32MiB -O--CK 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 5 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 144 --- Lifetime Power-On Resets 0x01 0x010 4 13 --- Power-on Hours 0x01 0x018 6 0 --- Logical Sectors Written 0x01 0x020 6 3275639 --- Number of Write Commands 0x01 0x028 6 620198 --- Logical Sectors Read 0x01 0x030 6 3074375 --- Number of Read Commands 0x01 0x038 6 50092160 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 373 --- Number of Hardware Resets 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x000a 4 3 Device-to-host register FISes sent due to a COMRESET