/dev/nvme0n1 smartctl 7.5 2025-04-30 r5714 [x86_64-linux-6.12.13-generic-4rosa13-x86_64] (local build) Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: NX-128 2280 Serial Number: -- Firmware Version: SN10092 PCI Vendor/Subsystem ID: 0x1e4b IEEE OUI Identifier: 0x000000 Total NVM Capacity: 128,035,676,160 [128 GB] Unallocated NVM Capacity: 0 Controller ID: 0 NVMe Version: 1.4 Number of Namespaces: 1 Namespace 1 Size/Capacity: 128,035,676,160 [128 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 000000 ... Local Time is: Sat Jun 14 21:38:42 2025 MSK Firmware Updates (0x1a): 5 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Log Page Attributes (0x02): Cmd_Eff_Lg Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 90 Celsius Critical Comp. Temp. Threshold: 95 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.50W - - 0 0 0 0 0 0 1 + 5.80W - - 1 1 1 1 0 0 2 + 3.60W - - 2 2 2 2 0 0 3 - 0.7460W - - 3 3 3 3 5000 10000 4 - 0.7260W - - 4 4 4 4 8000 45000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02, NSID 0xffffffff) Critical Warning: 0x00 Temperature: 42 Celsius Available Spare: 100% Available Spare Threshold: 1% Percentage Used: 17% Data Units Read: 17,061,344 [8.73 TB] Data Units Written: 40,434,977 [20.7 TB] Host Read Commands: 174,907,471 Host Write Commands: 231,767,532 Controller Busy Time: 889 Power Cycles: 549 Power On Hours: 8,715 Unsafe Shutdowns: 123 Media and Data Integrity Errors: 0 Error Information Log Entries: 5,101 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 42 Celsius Temperature Sensor 2: 71 Celsius Thermal Temp. 1 Transition Count: 1014 Thermal Temp. 2 Transition Count: 1023 Thermal Temp. 1 Total Time: 1355 Thermal Temp. 2 Total Time: 569 Error Information (NVMe Log 0x01, 16 of 64 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS Message 0 5101 0 0x000c 0x4004 0x000 0 0 - Invalid Field in Command 1 5100 0 0x001b 0x4004 0x000 0 0 - Invalid Field in Command Self-test Log (NVMe Log 0x06, NSID 0xffffffff) Self-test status: No self-test in progress No Self-tests Logged /dev/sda smartctl 7.5 2025-04-30 r5714 [x86_64-linux-6.12.13-generic-4rosa13-x86_64] (local build) Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue (CMR) Device Model: WDC WD10EZEX-08WN4A0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 02.01A02 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.5/5706 ATA Version is: ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Jun 14 21:38:42 2025 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (11400) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 118) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 172 171 021 - 2358 4 Start_Stop_Count -O--CK 097 097 000 - 3041 5 Reallocated_Sector_Ct PO--CK 194 194 140 - 274 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 079 079 000 - 15883 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1848 192 Power-Off_Retract_Count -O--CK 200 200 000 - 307 193 Load_Cycle_Count -O--CK 195 195 000 - 16161 194 Temperature_Celsius -O---K 106 090 000 - 37 196 Reallocated_Event_Count -O--CK 149 149 000 - 51 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 48 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xdf GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 24 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 24 [23] occurred at disk power-on lifetime: 2745 hours (114 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 03 00 00 00 00 00 00 00 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ef 00 10 00 03 00 00 00 00 00 00 00 00 00:01:09.619 SET FEATURES [Enable SATA feature] ef 00 10 00 02 00 00 00 00 00 00 00 00 00:01:09.598 SET FEATURES [Enable SATA feature] b1 00 c1 00 00 00 00 00 00 00 00 00 00 00:01:09.587 DEVICE CONFIGURATION FREEZE LOCK [OBS-ACS-3] f5 00 00 00 00 00 00 00 00 00 00 00 00 00:01:09.566 SECURITY FREEZE LOCK ef 00 10 00 06 00 00 00 00 00 00 00 00 00:01:09.555 SET FEATURES [Enable SATA feature] Error 23 [22] occurred at disk power-on lifetime: 2745 hours (114 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 02 00 00 00 00 00 00 00 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ef 00 10 00 02 00 00 00 00 00 00 00 00 00:01:09.598 SET FEATURES [Enable SATA feature] b1 00 c1 00 00 00 00 00 00 00 00 00 00 00:01:09.587 DEVICE CONFIGURATION FREEZE LOCK [OBS-ACS-3] f5 00 00 00 00 00 00 00 00 00 00 00 00 00:01:09.566 SECURITY FREEZE LOCK ef 00 10 00 06 00 00 00 00 00 00 00 00 00:01:09.555 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:09.523 IDENTIFY DEVICE Error 22 [21] occurred at disk power-on lifetime: 2745 hours (114 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 00 00 00 00 00 00 00 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b1 00 c1 00 00 00 00 00 00 00 00 00 00 00:01:09.587 DEVICE CONFIGURATION FREEZE LOCK [OBS-ACS-3] f5 00 00 00 00 00 00 00 00 00 00 00 00 00:01:09.566 SECURITY FREEZE LOCK ef 00 10 00 06 00 00 00 00 00 00 00 00 00:01:09.555 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:09.523 IDENTIFY DEVICE 60 00 40 00 80 00 00 11 68 d7 a7 40 00 00:00:36.001 READ FPDMA QUEUED Error 21 [20] occurred at disk power-on lifetime: 2745 hours (114 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 00 00 00 00 00 00 00 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- f5 00 00 00 00 00 00 00 00 00 00 00 00 00:01:09.566 SECURITY FREEZE LOCK ef 00 10 00 06 00 00 00 00 00 00 00 00 00:01:09.555 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:09.523 IDENTIFY DEVICE 60 00 40 00 80 00 00 11 68 d7 a7 40 00 00:00:36.001 READ FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 40 00 00:00:03.377 FLUSH CACHE EXT Error 20 [19] occurred at disk power-on lifetime: 2745 hours (114 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 06 00 00 00 00 00 00 00 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ef 00 10 00 06 00 00 00 00 00 00 00 00 00:01:09.555 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 00 00 00:01:09.523 IDENTIFY DEVICE 60 00 40 00 80 00 00 11 68 d7 a7 40 00 00:00:36.001 READ FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 40 00 00:00:03.377 FLUSH CACHE EXT 60 00 40 00 70 00 00 11 68 d7 3f 40 00 00:00:03.362 READ FPDMA QUEUED Error 19 [18] occurred at disk power-on lifetime: 2745 hours (114 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 00 00 00 00 5b 1f 20 40 00 Device Fault; Error: ABRT at LBA = 0x005b1f20 = 5971744 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 40 00 80 00 00 11 68 d7 a7 40 00 00:00:36.001 READ FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 40 00 00:00:03.377 FLUSH CACHE EXT 60 00 40 00 70 00 00 11 68 d7 3f 40 00 00:00:03.362 READ FPDMA QUEUED 61 00 18 00 68 00 00 00 5b 1f 18 40 00 00:00:03.361 WRITE FPDMA QUEUED 60 00 40 00 60 00 00 11 68 d6 d7 40 00 00:00:03.361 READ FPDMA QUEUED Error 18 [17] occurred at disk power-on lifetime: 2745 hours (114 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 00 00 00 00 5b 1f 20 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ea 00 00 00 00 00 00 00 00 00 00 40 00 00:00:03.377 FLUSH CACHE EXT 60 00 40 00 70 00 00 11 68 d7 3f 40 00 00:00:03.362 READ FPDMA QUEUED 61 00 18 00 68 00 00 00 5b 1f 18 40 00 00:00:03.361 WRITE FPDMA QUEUED 60 00 40 00 60 00 00 11 68 d6 d7 40 00 00:00:03.361 READ FPDMA QUEUED 60 00 08 00 58 00 00 00 60 15 78 40 00 00:00:03.361 READ FPDMA QUEUED Error 17 [16] occurred at disk power-on lifetime: 2744 hours (114 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 41 00 01 00 00 0d 57 ca f8 40 00 Error: ABRT at LBA = 0x0d57caf8 = 223857400 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 58 00 58 00 00 0d 57 ca f8 40 00 00:33:22.584 READ FPDMA QUEUED 60 01 00 00 50 00 00 0d a7 0f e0 40 00 00:33:21.694 READ FPDMA QUEUED 60 01 00 00 48 00 00 0d a7 0e e0 40 00 00:33:21.694 READ FPDMA QUEUED 60 01 00 00 40 00 00 0d a7 0d e0 40 00 00:33:21.694 READ FPDMA QUEUED 60 01 00 00 38 00 00 0d a7 0c e0 40 00 00:33:21.694 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 14771 - # 2 Short offline Completed without error 00% 14748 - # 3 Short offline Completed without error 00% 11948 - # 4 Short offline Completed without error 00% 11946 - # 5 Extended offline Completed without error 00% 10056 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 24/42 Celsius Lifetime Min/Max Temperature: 20/54 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (93) Index Estimated Time Temperature Celsius 94 2025-06-14 13:41 37 ****************** ... ..(191 skipped). .. ****************** 286 2025-06-14 16:53 37 ****************** 287 2025-06-14 16:54 ? - 288 2025-06-14 16:55 37 ****************** 289 2025-06-14 16:56 38 ******************* 290 2025-06-14 16:57 38 ******************* 291 2025-06-14 16:58 38 ******************* 292 2025-06-14 16:59 37 ****************** ... ..(278 skipped). .. ****************** 93 2025-06-14 21:38 37 ****************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 10 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 87861 Vendor specific