Probe #76cfde7dc3 of ASUSTek PRIME A320M-K Desktop Computer

Log: smartctl

/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-28-amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: KINGSTON SA400S37/240GB Serial Number: -- LU WWN Device Id: 0 000000 ... Firmware Version: FW201105 User Capacity: 240,057,409,536 bytes [240 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: Not in smartctl database 7.3/5528 ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Jan 4 01:35:35 2025 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Disabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5d) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 4) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 9 Power_On_Hours -O--CK 100 100 050 - 4785 12 Power_Cycle_Count -O--CK 100 100 050 - 1183 160 Unknown_Attribute -O--CK 100 100 050 - 0 161 Unknown_Attribute -O--CK 100 100 050 - 0 163 Unknown_Attribute -O--CK 100 100 050 - 2352 164 Unknown_Attribute -O--CK 100 100 050 - 223 165 Unknown_Attribute -O--CK 100 100 050 - 249 166 Unknown_Attribute -O--CK 100 100 050 - 175 167 Unknown_Attribute -O--CK 100 100 050 - 225 168 Unknown_Attribute -O--CK 100 100 050 - 0 169 Unknown_Attribute -O--CK 100 100 050 - 100 175 Program_Fail_Count_Chip -O--CK 100 100 050 - 67108864 176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 260763 177 Wear_Leveling_Count -O--CK 100 100 050 - 3464561 178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 192 Power-Off_Retract_Count -O--CK 100 100 050 - 33 194 Temperature_Celsius -O--CK 100 100 050 - 25 195 Hardware_ECC_Recovered -O--CK 100 100 050 - 6714 196 Reallocated_Event_Count -O--CK 100 100 050 - 0 197 Current_Pending_Sector -O--CK 100 100 050 - 0 198 Offline_Uncorrectable -O--CK 100 100 050 - 0 199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 232 Available_Reservd_Space -O--CK 100 100 050 - 0 241 Total_LBAs_Written -O--CK 100 100 050 - 326211 242 Total_LBAs_Read -O--CK 100 100 050 - 64132 249 Unknown_Attribute -O--CK 100 100 050 - 350212 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 1 Comprehensive SMART error log 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 0 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Offline Completed without error 00% 4774 - # 2 Offline Self-test routine in progress 10% 4774 - # 3 Offline Self-test routine in progress 10% 4774 - # 4 Offline Self-test routine in progress 10% 4774 - # 5 Offline Self-test routine in progress 10% 4774 - # 6 Offline Self-test routine in progress 10% 4774 - # 7 Offline Self-test routine in progress 10% 4774 - # 8 Offline Self-test routine in progress 10% 4774 - # 9 Offline Self-test routine in progress 10% 4774 - #10 Offline Self-test routine in progress 10% 4774 - #11 Offline Self-test routine in progress 10% 4774 - #12 Offline Self-test routine in progress 10% 4774 - #13 Offline Self-test routine in progress 10% 4774 - #14 Offline Self-test routine in progress 10% 4774 - #15 Offline Self-test routine in progress 10% 4774 - #16 Offline Self-test routine in progress 10% 4774 - #17 Offline Self-test routine in progress 10% 4774 - #18 Offline Self-test routine in progress 10% 4774 - #19 Offline Self-test routine in progress 10% 4774 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1183 --- Lifetime Power-On Resets 0x01 0x010 4 4785 --- Power-on Hours 0x01 0x018 6 21378564096 --- Logical Sectors Written 0x01 0x020 6 127563076 --- Number of Write Commands 0x01 0x028 6 4202954752 --- Logical Sectors Read 0x01 0x030 6 44609798 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1183 --- Lifetime Power-On Resets 0x01 0x010 4 4785 --- Power-on Hours 0x01 0x018 6 21378564096 --- Logical Sectors Written 0x01 0x020 6 127563076 --- Number of Write Commands 0x01 0x028 6 4202954752 --- Logical Sectors Read 0x01 0x030 6 44609798 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1183 --- Lifetime Power-On Resets 0x01 0x010 4 4785 --- Power-on Hours 0x01 0x018 6 21378564096 --- Logical Sectors Written 0x01 0x020 6 127563076 --- Number of Write Commands 0x01 0x028 6 4202954752 --- Logical Sectors Read 0x01 0x030 6 44609798 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1183 --- Lifetime Power-On Resets 0x01 0x010 4 4785 --- Power-on Hours 0x01 0x018 6 21378564096 --- Logical Sectors Written 0x01 0x020 6 127563076 --- Number of Write Commands 0x01 0x028 6 4202954752 --- Logical Sectors Read 0x01 0x030 6 44609798 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1183 --- Lifetime Power-On Resets 0x01 0x010 4 4785 --- Power-on Hours 0x01 0x018 6 21378564096 --- Logical Sectors Written 0x01 0x020 6 127563076 --- Number of Write Commands 0x01 0x028 6 4202954752 --- Logical Sectors Read 0x01 0x030 6 44609798 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1183 --- Lifetime Power-On Resets 0x01 0x010 4 4785 --- Power-on Hours 0x01 0x018 6 21378564096 --- Logical Sectors Written 0x01 0x020 6 127563076 --- Number of Write Commands 0x01 0x028 6 4202954752 --- Logical Sectors Read 0x01 0x030 6 44609798 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1183 --- Lifetime Power-On Resets 0x01 0x010 4 4785 --- Power-on Hours 0x01 0x018 6 21378564096 --- Logical Sectors Written 0x01 0x020 6 127563076 --- Number of Write Commands 0x01 0x028 6 4202954752 --- Logical Sectors Read 0x01 0x030 6 44609798 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1183 --- Lifetime Power-On Resets 0x01 0x010 4 4785 --- Power-on Hours 0x01 0x018 6 21378564096 --- Logical Sectors Written 0x01 0x020 6 127563076 --- Number of Write Commands 0x01 0x028 6 4202954752 --- Logical Sectors Read 0x01 0x030 6 44609798 --- Number of Read Commands |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0009 4 1450 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 684 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-28-amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint M7E (AF) Device Model: SAMSUNG HM501II Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 2AJ10001 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database 7.3/5528 ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sat Jan 4 01:35:35 2025 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 7920) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 132) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 1 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 089 089 025 - 3417 4 Start_Stop_Count -O--CK 100 100 000 - 230 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 449 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 71 12 Power_Cycle_Count -O--CK 100 100 000 - 220 191 G-Sense_Error_Rate -O---K 100 100 000 - 472 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 064 064 000 - 18 (Min/Max 16/46) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 10 223 Load_Retry_Count -O--CK 100 100 000 - 71 225 Load_Cycle_Count -O--CK 100 100 000 - 4052 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 449 - # 2 Short offline Completed without error 00% 449 - # 3 Short offline Completed without error 00% 445 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 18 Celsius Power Cycle Min/Max Temperature: 16/18 Celsius Lifetime Min/Max Temperature: 15/58 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (125) Index Estimated Time Temperature Celsius 126 2025-01-03 15:00 18 - 127 2025-01-03 15:05 30 *********** 0 2025-01-03 15:10 31 ************ 1 2025-01-03 15:15 24 ***** 2 2025-01-03 15:20 27 ******** 3 2025-01-03 15:25 29 ********** 4 2025-01-03 15:30 30 *********** 5 2025-01-03 15:35 31 ************ 6 2025-01-03 15:40 22 *** ... ..( 3 skipped). .. *** 10 2025-01-03 16:00 22 *** 11 2025-01-03 16:05 26 ******* 12 2025-01-03 16:10 27 ******** 13 2025-01-03 16:15 28 ********* 14 2025-01-03 16:20 28 ********* 15 2025-01-03 16:25 29 ********** 16 2025-01-03 16:30 30 *********** 17 2025-01-03 16:35 27 ******** 18 2025-01-03 16:40 26 ******* 19 2025-01-03 16:45 25 ****** ... ..( 6 skipped). .. ****** 26 2025-01-03 17:20 25 ****** 27 2025-01-03 17:25 26 ******* ... ..( 2 skipped). .. ******* 30 2025-01-03 17:40 26 ******* 31 2025-01-03 17:45 27 ******** ... ..( 7 skipped). .. ******** 39 2025-01-03 18:25 27 ******** 40 2025-01-03 18:30 24 ***** 41 2025-01-03 18:35 28 ********* 42 2025-01-03 18:40 30 *********** 43 2025-01-03 18:45 32 ************* 44 2025-01-03 18:50 33 ************** 45 2025-01-03 18:55 34 *************** 46 2025-01-03 19:00 33 ************** 47 2025-01-03 19:05 32 ************* 48 2025-01-03 19:10 30 *********** 49 2025-01-03 19:15 30 *********** 50 2025-01-03 19:20 30 *********** 51 2025-01-03 19:25 31 ************ 52 2025-01-03 19:30 32 ************* 53 2025-01-03 19:35 31 ************ 54 2025-01-03 19:40 30 *********** 55 2025-01-03 19:45 30 *********** 56 2025-01-03 19:50 30 *********** 57 2025-01-03 19:55 23 **** 58 2025-01-03 20:00 24 ***** 59 2025-01-03 20:05 27 ******** 60 2025-01-03 20:10 27 ******** 61 2025-01-03 20:15 27 ******** 62 2025-01-03 20:20 23 **** 63 2025-01-03 20:25 26 ******* 64 2025-01-03 20:30 28 ********* 65 2025-01-03 20:35 29 ********** 66 2025-01-03 20:40 30 *********** 67 2025-01-03 20:45 24 ***** 68 2025-01-03 20:50 28 ********* 69 2025-01-03 20:55 30 *********** 70 2025-01-03 21:00 31 ************ 71 2025-01-03 21:05 31 ************ 72 2025-01-03 21:10 30 *********** 73 2025-01-03 21:15 31 ************ 74 2025-01-03 21:20 32 ************* 75 2025-01-03 21:25 33 ************** 76 2025-01-03 21:30 32 ************* 77 2025-01-03 21:35 31 ************ 78 2025-01-03 21:40 20 * 79 2025-01-03 21:45 22 *** 80 2025-01-03 21:50 23 **** 81 2025-01-03 21:55 23 **** 82 2025-01-03 22:00 24 ***** 83 2025-01-03 22:05 24 ***** 84 2025-01-03 22:10 26 ******* 85 2025-01-03 22:15 27 ******** 86 2025-01-03 22:20 27 ******** 87 2025-01-03 22:25 27 ******** 88 2025-01-03 22:30 18 - 89 2025-01-03 22:35 22 *** 90 2025-01-03 22:40 19 - 91 2025-01-03 22:45 22 *** 92 2025-01-03 22:50 23 **** 93 2025-01-03 22:55 23 **** 94 2025-01-03 23:00 23 **** 95 2025-01-03 23:05 24 ***** 96 2025-01-03 23:10 26 ******* 97 2025-01-03 23:15 26 ******* 98 2025-01-03 23:20 27 ******** ... ..( 5 skipped). .. ******** 104 2025-01-03 23:50 27 ******** 105 2025-01-03 23:55 24 ***** 106 2025-01-04 00:00 21 ** 107 2025-01-04 00:05 22 *** 108 2025-01-04 00:10 22 *** 109 2025-01-04 00:15 22 *** 110 2025-01-04 00:20 24 ***** 111 2025-01-04 00:25 26 ******* 112 2025-01-04 00:30 27 ******** 113 2025-01-04 00:35 27 ******** 114 2025-01-04 00:40 26 ******* 115 2025-01-04 00:45 25 ****** 116 2025-01-04 00:50 26 ******* 117 2025-01-04 00:55 27 ******** 118 2025-01-04 01:00 27 ******** 119 2025-01-04 01:05 28 ********* 120 2025-01-04 01:10 27 ******** 121 2025-01-04 01:15 20 * 122 2025-01-04 01:20 23 **** 123 2025-01-04 01:25 25 ****** 124 2025-01-04 01:30 27 ******** 125 2025-01-04 01:35 26 ******* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 3 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific


Hardware for Linux and BSD

GitHub