Probe #78632c3242 of Lenovo ThinkCentre M90p 545... Desktop Computer

Log: smartctl

/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.11.12-desktop-1omv4002] (OpenMandriva Lx 7.2-2) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Ultrastar 7K3000 Device Model: Hitachi HUA723020ALA641 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: MK7OA840 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Mon Jun 26 20:57:17 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (18950) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 316) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 100 100 054 - 0 3 Spin_Up_Time POS--- 142 142 024 - 388 (Average 488) 4 Start_Stop_Count -O--C- 100 100 000 - 894 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 100 100 020 - 0 9 Power_On_Hours -O--C- 100 100 000 - 5520 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 889 192 Power-Off_Retract_Count -O--CK 100 100 000 - 1035 193 Load_Cycle_Count -O--C- 100 100 000 - 1035 194 Temperature_Celsius -O---- 125 125 000 - 48 (Min/Max 14/54) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 63 Current Device Internal Status Data log 0x80 GPL R/W 63 Host vendor specific log 0x81-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 32188 - # 2 Short offline Completed without error 00% 27148 - # 3 Short offline Completed without error 00% 18292 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 48 Celsius Power Cycle Min/Max Temperature: 48/49 Celsius Lifetime Min/Max Temperature: 14/54 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (32) Index Estimated Time Temperature Celsius 33 2023-06-26 18:50 46 *************************** ... ..( 7 skipped). .. *************************** 41 2023-06-26 18:58 46 *************************** 42 2023-06-26 18:59 47 **************************** 43 2023-06-26 19:00 47 **************************** 44 2023-06-26 19:01 47 **************************** 45 2023-06-26 19:02 46 *************************** 46 2023-06-26 19:03 46 *************************** 47 2023-06-26 19:04 47 **************************** 48 2023-06-26 19:05 46 *************************** 49 2023-06-26 19:06 47 **************************** 50 2023-06-26 19:07 46 *************************** ... ..( 3 skipped). .. *************************** 54 2023-06-26 19:11 46 *************************** 55 2023-06-26 19:12 47 **************************** 56 2023-06-26 19:13 47 **************************** 57 2023-06-26 19:14 46 *************************** ... ..( 3 skipped). .. *************************** 61 2023-06-26 19:18 46 *************************** 62 2023-06-26 19:19 47 **************************** 63 2023-06-26 19:20 47 **************************** 64 2023-06-26 19:21 ? - 65 2023-06-26 19:22 35 **************** 66 2023-06-26 19:23 36 ***************** 67 2023-06-26 19:24 36 ***************** 68 2023-06-26 19:25 37 ****************** 69 2023-06-26 19:26 37 ****************** 70 2023-06-26 19:27 37 ****************** 71 2023-06-26 19:28 38 ******************* 72 2023-06-26 19:29 38 ******************* 73 2023-06-26 19:30 38 ******************* 74 2023-06-26 19:31 39 ******************** 75 2023-06-26 19:32 39 ******************** 76 2023-06-26 19:33 39 ******************** 77 2023-06-26 19:34 40 ********************* ... ..( 4 skipped). .. ********************* 82 2023-06-26 19:39 40 ********************* 83 2023-06-26 19:40 41 ********************** ... ..( 2 skipped). .. ********************** 86 2023-06-26 19:43 41 ********************** 87 2023-06-26 19:44 42 *********************** ... ..( 2 skipped). .. *********************** 90 2023-06-26 19:47 42 *********************** 91 2023-06-26 19:48 43 ************************ ... ..( 5 skipped). .. ************************ 97 2023-06-26 19:54 43 ************************ 98 2023-06-26 19:55 44 ************************* ... ..( 2 skipped). .. ************************* 101 2023-06-26 19:58 44 ************************* 102 2023-06-26 19:59 45 ************************** 103 2023-06-26 20:00 44 ************************* 104 2023-06-26 20:01 45 ************************** ... ..( 8 skipped). .. ************************** 113 2023-06-26 20:10 45 ************************** 114 2023-06-26 20:11 46 *************************** ... ..( 8 skipped). .. *************************** 123 2023-06-26 20:20 46 *************************** 124 2023-06-26 20:21 47 **************************** 125 2023-06-26 20:22 46 *************************** 126 2023-06-26 20:23 47 **************************** ... ..( 15 skipped). .. **************************** 14 2023-06-26 20:39 47 **************************** 15 2023-06-26 20:40 48 ***************************** ... ..( 4 skipped). .. ***************************** 20 2023-06-26 20:45 48 ***************************** 21 2023-06-26 20:46 ? - 22 2023-06-26 20:47 48 ***************************** ... ..( 2 skipped). .. ***************************** 25 2023-06-26 20:50 48 ***************************** 26 2023-06-26 20:51 49 ****************************** 27 2023-06-26 20:52 49 ****************************** 28 2023-06-26 20:53 49 ****************************** 29 2023-06-26 20:54 48 ***************************** ... ..( 2 skipped). .. ***************************** 32 2023-06-26 20:57 48 ***************************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 889 --- Lifetime Power-On Resets 0x01 0x010 4 5520 --- Power-on Hours 0x01 0x018 6 23149248816 --- Logical Sectors Written 0x01 0x020 6 188166702 --- Number of Write Commands 0x01 0x028 6 13976567015 --- Logical Sectors Read 0x01 0x030 6 268671670 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 5517 --- Spindle Motor Power-on Hours 0x03 0x010 4 5516 --- Head Flying Hours 0x03 0x018 4 1035 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 2 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 3 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 48 --- Current Temperature 0x05 0x010 1 46 N-- Average Short Term Temperature 0x05 0x018 1 45 N-- Average Long Term Temperature 0x05 0x020 1 54 --- Highest Temperature 0x05 0x028 1 14 --- Lowest Temperature 0x05 0x030 1 49 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 46 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 3311 --- Number of Hardware Resets 0x06 0x010 4 1568 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdb smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.11.12-desktop-1omv4002] (OpenMandriva Lx 7.2-2) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint M7 Device Model: SAMSUNG HM500JI Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 2AC101C4 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Mon Jun 26 20:57:18 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 8280) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 138) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 0 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 090 088 025 - 3220 4 Start_Stop_Count -O--CK 099 099 000 - 1385 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 2917 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 134 12 Power_Cycle_Count -O--CK 099 099 000 - 1198 191 G-Sense_Error_Rate -O---K 100 100 000 - 19 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 061 060 000 - 39 (Min/Max 8/47) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 1 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 138 223 Load_Retry_Count -O--CK 100 100 000 - 134 225 Load_Cycle_Count -O--CK 093 093 000 - 76918 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xbb GPL VS 4 Device vendor specific log 0xbc GPL VS 2 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 1 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 [0] occurred at disk power-on lifetime: 718 hours (29 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 02 5f 00 00 00 00 00 00 40 00 Error: ICRC, ABRT 607 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 03 03 00 f0 00 00 10 3a 01 6f 40 00 00:00:01.359 READ DMA EXT 25 03 03 00 10 00 00 10 3a 01 5f 40 00 00:00:01.359 READ DMA EXT 25 03 03 00 f0 00 00 10 3a 00 6f 40 00 00:00:01.359 READ DMA EXT 25 03 03 00 10 00 00 10 3a 00 5f 40 00 00:00:01.359 READ DMA EXT 25 03 03 00 f0 00 00 10 39 ff 6f 40 00 00:00:01.359 READ DMA EXT SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 39 Celsius Power Cycle Min/Max Temperature: 39/39 Celsius Lifetime Min/Max Temperature: 16/53 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (112) Index Estimated Time Temperature Celsius 113 2023-06-26 10:20 35 **************** ... ..( 47 skipped). .. **************** 33 2023-06-26 14:20 35 **************** 34 2023-06-26 14:25 27 ******** 35 2023-06-26 14:30 30 *********** 36 2023-06-26 14:35 31 ************ 37 2023-06-26 14:40 32 ************* 38 2023-06-26 14:45 33 ************** 39 2023-06-26 14:50 33 ************** 40 2023-06-26 14:55 34 *************** ... ..( 16 skipped). .. *************** 57 2023-06-26 16:20 34 *************** 58 2023-06-26 16:25 26 ******* 59 2023-06-26 16:30 29 ********** 60 2023-06-26 16:35 31 ************ 61 2023-06-26 16:40 32 ************* 62 2023-06-26 16:45 32 ************* 63 2023-06-26 16:50 33 ************** 64 2023-06-26 16:55 30 *********** 65 2023-06-26 17:00 34 *************** 66 2023-06-26 17:05 35 **************** 67 2023-06-26 17:10 38 ******************* 68 2023-06-26 17:15 39 ******************** 69 2023-06-26 17:20 39 ******************** 70 2023-06-26 17:25 36 ***************** 71 2023-06-26 17:30 38 ******************* 72 2023-06-26 17:35 39 ******************** 73 2023-06-26 17:40 39 ******************** 74 2023-06-26 17:45 40 ********************* 75 2023-06-26 17:50 40 ********************* 76 2023-06-26 17:55 32 ************* 77 2023-06-26 18:00 34 *************** 78 2023-06-26 18:05 36 ***************** 79 2023-06-26 18:10 38 ******************* 80 2023-06-26 18:15 39 ******************** 81 2023-06-26 18:20 39 ******************** 82 2023-06-26 18:25 40 ********************* ... ..( 27 skipped). .. ********************* 110 2023-06-26 20:45 40 ********************* 111 2023-06-26 20:50 36 ***************** 112 2023-06-26 20:55 39 ******************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 0 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific


Hardware for Linux and BSD

GitHub