/dev/sda === START OF INFORMATION SECTION === Model Family: Seagate Barracuda ES.2 Device Model: ST31000340NS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: SN03 User Capacity: 1 000 204 886 016 bytes [1,00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-6 T13/1410D revision 2 Local Time is: Sat Sep 17 08:19:30 2016 MSK ==> WARNING: There are known problems with these drives, see the following Seagate web pages: http://knowledge.seagate.com/articles/en_US/FAQ/207931en http://knowledge.seagate.com/articles/en_US/FAQ/207963en SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 642) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 239) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 114 096 006 - 76098647 3 Spin_Up_Time PO---- 089 086 000 - 0 4 Start_Stop_Count -O--CK 096 096 020 - 4231 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 051 049 030 - 5042452800934 9 Power_On_Hours -O--CK 069 069 000 - 27783 10 Spin_Retry_Count PO--C- 100 100 097 - 15 12 Power_Cycle_Count -O--CK 098 037 020 - 2711 184 End-to-End_Error -O--CK 100 100 000 - 0 187 Reported_Uncorrect -O-RCK 001 001 000 - 180 188 Command_Timeout -O--CK 100 092 000 - 197571510389 189 High_Fly_Writes -O---K 100 100 045 - 0 190 Airflow_Temperature_Cel -O--CK 077 046 000 - 23 (Min/Max 21/23) 194 Temperature_Celsius -O-RC- 023 054 000 - 23 (0 15 0 0 0) 195 Hardware_ECC_Recovered -O--C- 040 016 000 - 76098647 197 Current_Pending_Sector ----C- 100 100 000 - 0 198 Offline_Uncorrectable -OSRCK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 3365 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 SATA NCQ Queued Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 2819 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 192 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 192 [11] occurred at disk power-on lifetime: 25660 hours (1069 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 59 84 00 c0 e6 00 00 Error: UNC at LBA = 0x598400c0e6 = 384466731238 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 59 8a 00 c0 a8 40 00 01:15:19.342 READ FPDMA QUEUED 60 00 00 01 00 00 59 89 00 c0 a8 40 00 01:15:19.342 READ FPDMA QUEUED 60 00 00 01 00 00 59 88 00 c0 a8 40 00 01:15:19.341 READ FPDMA QUEUED 60 00 00 01 00 00 59 87 00 c0 a8 40 00 01:15:19.341 READ FPDMA QUEUED 60 00 00 01 00 00 59 86 00 c0 a8 40 00 01:15:19.341 READ FPDMA QUEUED Error 191 [10] occurred at disk power-on lifetime: 25660 hours (1069 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 59 84 00 c0 e6 00 00 Error: UNC at LBA = 0x598400c0e6 = 384466731238 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 59 8a 00 c0 a8 40 00 00:52:00.427 READ FPDMA QUEUED 60 00 00 01 00 00 59 89 00 c0 a8 40 00 00:52:00.427 READ FPDMA QUEUED 60 00 00 01 00 00 59 88 00 c0 a8 40 00 00:52:00.427 READ FPDMA QUEUED 60 00 00 01 00 00 59 87 00 c0 a8 40 00 00:52:00.426 READ FPDMA QUEUED 60 00 00 01 00 00 59 86 00 c0 a8 40 00 00:52:00.426 READ FPDMA QUEUED Error 190 [9] occurred at disk power-on lifetime: 25582 hours (1065 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 59 84 00 c0 e6 00 00 Error: UNC at LBA = 0x598400c0e6 = 384466731238 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 59 8a 00 c0 a8 40 00 04:13:57.496 READ FPDMA QUEUED 60 00 00 01 00 00 59 89 00 c0 a8 40 00 04:13:57.496 READ FPDMA QUEUED 60 00 00 01 00 00 59 88 00 c0 a8 40 00 04:13:57.496 READ FPDMA QUEUED 60 00 00 01 00 00 59 87 00 c0 a8 40 00 04:13:57.495 READ FPDMA QUEUED 60 00 00 01 00 00 59 86 00 c0 a8 40 00 04:13:57.495 READ FPDMA QUEUED Error 189 [8] occurred at disk power-on lifetime: 25582 hours (1065 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 59 84 00 c0 e6 00 00 Error: UNC at LBA = 0x598400c0e6 = 384466731238 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 59 8a 00 c0 a8 40 00 04:05:57.716 READ FPDMA QUEUED 60 00 00 01 00 00 59 89 00 c0 a8 40 00 04:05:57.715 READ FPDMA QUEUED 60 00 00 01 00 00 59 88 00 c0 a8 40 00 04:05:57.715 READ FPDMA QUEUED 60 00 00 01 00 00 59 87 00 c0 a8 40 00 04:05:57.715 READ FPDMA QUEUED 60 00 00 01 00 00 59 86 00 c0 a8 40 00 04:05:57.714 READ FPDMA QUEUED Error 188 [7] occurred at disk power-on lifetime: 25582 hours (1065 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 59 84 00 c0 e6 00 00 Error: UNC at LBA = 0x598400c0e6 = 384466731238 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 59 8a 00 c0 a8 40 00 03:46:36.418 READ FPDMA QUEUED 60 00 00 01 00 00 59 89 00 c0 a8 40 00 03:46:36.418 READ FPDMA QUEUED 60 00 00 01 00 00 59 88 00 c0 a8 40 00 03:46:36.417 READ FPDMA QUEUED 60 00 00 01 00 00 59 87 00 c0 a8 40 00 03:46:36.417 READ FPDMA QUEUED 60 00 00 01 00 00 59 86 00 c0 a8 40 00 03:46:36.417 READ FPDMA QUEUED Error 187 [6] occurred at disk power-on lifetime: 25580 hours (1065 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 59 84 00 c0 e6 00 00 Error: UNC at LBA = 0x598400c0e6 = 384466731238 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 59 8a 00 c0 a8 40 00 02:34:45.882 READ FPDMA QUEUED 60 00 00 01 00 00 59 89 00 c0 a8 40 00 02:34:45.882 READ FPDMA QUEUED 60 00 00 01 00 00 59 88 00 c0 a8 40 00 02:34:45.882 READ FPDMA QUEUED 60 00 00 01 00 00 59 87 00 c0 a8 40 00 02:34:45.881 READ FPDMA QUEUED 60 00 00 01 00 00 59 86 00 c0 a8 40 00 02:34:45.881 READ FPDMA QUEUED Error 186 [5] occurred at disk power-on lifetime: 25580 hours (1065 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 59 84 00 c0 e6 00 00 Error: UNC at LBA = 0x598400c0e6 = 384466731238 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 59 8a 00 c0 a8 40 00 02:27:27.177 READ FPDMA QUEUED 60 00 00 01 00 00 59 89 00 c0 a8 40 00 02:27:27.177 READ FPDMA QUEUED 60 00 00 01 00 00 59 88 00 c0 a8 40 00 02:27:27.177 READ FPDMA QUEUED 60 00 00 01 00 00 59 87 00 c0 a8 40 00 02:27:27.177 READ FPDMA QUEUED 60 00 00 01 00 00 59 86 00 c0 a8 40 00 02:27:27.176 READ FPDMA QUEUED Error 185 [4] occurred at disk power-on lifetime: 25580 hours (1065 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 59 84 00 c0 e6 00 00 Error: UNC at LBA = 0x598400c0e6 = 384466731238 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 59 8a 00 c0 a8 40 00 01:58:32.907 READ FPDMA QUEUED 60 00 00 01 00 00 59 89 00 c0 a8 40 00 01:58:32.906 READ FPDMA QUEUED 60 00 00 01 00 00 59 88 00 c0 a8 40 00 01:58:32.906 READ FPDMA QUEUED 60 00 00 01 00 00 59 87 00 c0 a8 40 00 01:58:32.906 READ FPDMA QUEUED 60 00 00 01 00 00 59 86 00 c0 a8 40 00 01:58:32.905 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Aborted by host 90% 424 - # 2 Short offline Aborted by host 90% 337 - # 3 Short offline Aborted by host 90% 326 - # 4 Short offline Aborted by host 90% 251 - # 5 Short offline Aborted by host 90% 226 - # 6 Short offline Aborted by host 90% 195 - # 7 Short offline Aborted by host 90% 172 - # 8 Short offline Aborted by host 90% 171 - # 9 Short offline Aborted by host 90% 82 - #10 Short offline Aborted by host 90% 55 - #11 Short offline Aborted by host 90% 50 - #12 Short offline Aborted by host 90% 45 - #13 Short offline Aborted by host 90% 42 - #14 Short offline Aborted by host 90% 31 - #15 Short offline Aborted by host 90% 30 - #16 Short offline Aborted by host 90% 27 - #17 Short offline Aborted by host 90% 17 - #18 Short offline Aborted by host 90% 16 - #19 Short offline Aborted by host 90% 15 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 23 Celsius Power Cycle Min/Max Temperature: 21/23 Celsius Lifetime Min/Max Temperature: 16/54 Celsius Under/Over Temperature Limit Count: 0/4 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 128 (93) Index Estimated Time Temperature Celsius 94 2016-09-17 06:12 43 ************************ ... ..( 13 skipped). .. ************************ 108 2016-09-17 06:26 43 ************************ 109 2016-09-17 06:27 44 ************************* 110 2016-09-17 06:28 44 ************************* 111 2016-09-17 06:29 43 ************************ ... ..( 14 skipped). .. ************************ 126 2016-09-17 06:44 43 ************************ 127 2016-09-17 06:45 44 ************************* 0 2016-09-17 06:46 44 ************************* 1 2016-09-17 06:47 43 ************************ 2 2016-09-17 06:48 43 ************************ 3 2016-09-17 06:49 43 ************************ 4 2016-09-17 06:50 44 ************************* 5 2016-09-17 06:51 44 ************************* 6 2016-09-17 06:52 43 ************************ 7 2016-09-17 06:53 43 ************************ 8 2016-09-17 06:54 44 ************************* 9 2016-09-17 06:55 43 ************************ 10 2016-09-17 06:56 43 ************************ 11 2016-09-17 06:57 44 ************************* 12 2016-09-17 06:58 44 ************************* 13 2016-09-17 06:59 43 ************************ 14 2016-09-17 07:00 43 ************************ 15 2016-09-17 07:01 44 ************************* 16 2016-09-17 07:02 43 ************************ 17 2016-09-17 07:03 44 ************************* 18 2016-09-17 07:04 43 ************************ 19 2016-09-17 07:05 43 ************************ 20 2016-09-17 07:06 44 ************************* ... ..( 9 skipped). .. ************************* 30 2016-09-17 07:16 44 ************************* 31 2016-09-17 07:17 31 ************ 32 2016-09-17 07:18 31 ************ 33 2016-09-17 07:19 32 ************* 34 2016-09-17 07:20 32 ************* 35 2016-09-17 07:21 33 ************** 36 2016-09-17 07:22 34 *************** 37 2016-09-17 07:23 34 *************** 38 2016-09-17 07:24 34 *************** 39 2016-09-17 07:25 35 **************** 40 2016-09-17 07:26 35 **************** 41 2016-09-17 07:27 35 **************** 42 2016-09-17 07:28 36 ***************** 43 2016-09-17 07:29 36 ***************** 44 2016-09-17 07:30 36 ***************** 45 2016-09-17 07:31 37 ****************** ... ..( 2 skipped). .. ****************** 48 2016-09-17 07:34 37 ****************** 49 2016-09-17 07:35 38 ******************* 50 2016-09-17 07:36 38 ******************* 51 2016-09-17 07:37 30 *********** 52 2016-09-17 07:38 30 *********** 53 2016-09-17 07:39 31 ************ 54 2016-09-17 07:40 31 ************ 55 2016-09-17 07:41 32 ************* 56 2016-09-17 07:42 32 ************* 57 2016-09-17 07:43 33 ************** 58 2016-09-17 07:44 33 ************** 59 2016-09-17 07:45 34 *************** 60 2016-09-17 07:46 34 *************** 61 2016-09-17 07:47 34 *************** 62 2016-09-17 07:48 35 **************** 63 2016-09-17 07:49 35 **************** 64 2016-09-17 07:50 35 **************** 65 2016-09-17 07:51 36 ***************** ... ..( 2 skipped). .. ***************** 68 2016-09-17 07:54 36 ***************** 69 2016-09-17 07:55 37 ****************** 70 2016-09-17 07:56 37 ****************** 71 2016-09-17 07:57 37 ****************** 72 2016-09-17 07:58 38 ******************* ... ..( 3 skipped). .. ******************* 76 2016-09-17 08:02 38 ******************* 77 2016-09-17 08:03 39 ******************** ... ..( 4 skipped). .. ******************** 82 2016-09-17 08:08 39 ******************** 83 2016-09-17 08:09 40 ********************* ... ..( 4 skipped). .. ********************* 88 2016-09-17 08:14 40 ********************* 89 2016-09-17 08:15 ? - 90 2016-09-17 08:16 21 ** 91 2016-09-17 08:17 21 ** 92 2016-09-17 08:18 22 *** 93 2016-09-17 08:19 23 **** SCT Error Recovery Control: Read: 60 (6,0 seconds) Write: 60 (6,0 seconds) Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdb === START OF INFORMATION SECTION === Model Family: Western Digital Black Device Model: WDC WD2002FAEX-007BA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 05.01D05 User Capacity: 2 000 398 934 016 bytes [2,00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Sep 17 08:19:30 2016 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (30600) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 311) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 253 253 021 - 8383 4 Start_Stop_Count -O--CK 097 097 000 - 3467 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 081 081 000 - 14177 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1821 192 Power-Off_Retract_Count -O--CK 199 199 000 - 1198 193 Load_Cycle_Count -O--CK 200 200 000 - 2268 194 Temperature_Celsius -O---K 127 096 000 - 25 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 25 Celsius Power Cycle Min/Max Temperature: 23/25 Celsius Lifetime Min/Max Temperature: 0/56 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (297) Index Estimated Time Temperature Celsius 298 2016-09-17 00:22 45 ************************** ... ..( 32 skipped). .. ************************** 331 2016-09-17 00:55 45 ************************** 332 2016-09-17 00:56 46 *************************** 333 2016-09-17 00:57 46 *************************** 334 2016-09-17 00:58 45 ************************** 335 2016-09-17 00:59 44 ************************* 336 2016-09-17 01:00 43 ************************ 337 2016-09-17 01:01 42 *********************** 338 2016-09-17 01:02 ? - 339 2016-09-17 01:03 42 *********************** ... ..( 18 skipped). .. *********************** 358 2016-09-17 01:22 42 *********************** 359 2016-09-17 01:23 43 ************************ ... ..( 60 skipped). .. ************************ 420 2016-09-17 02:24 43 ************************ 421 2016-09-17 02:25 42 *********************** ... ..( 40 skipped). .. *********************** 462 2016-09-17 03:06 42 *********************** 463 2016-09-17 03:07 43 ************************ 464 2016-09-17 03:08 43 ************************ 465 2016-09-17 03:09 ? - 466 2016-09-17 03:10 23 **** 467 2016-09-17 03:11 23 **** 468 2016-09-17 03:12 24 ***** 469 2016-09-17 03:13 25 ****** 470 2016-09-17 03:14 35 **************** 471 2016-09-17 03:15 35 **************** 472 2016-09-17 03:16 35 **************** 473 2016-09-17 03:17 34 *************** 474 2016-09-17 03:18 34 *************** 475 2016-09-17 03:19 34 *************** 476 2016-09-17 03:20 33 ************** ... ..( 6 skipped). .. ************** 5 2016-09-17 03:27 33 ************** 6 2016-09-17 03:28 ? - 7 2016-09-17 03:29 32 ************* ... ..( 2 skipped). .. ************* 10 2016-09-17 03:32 32 ************* 11 2016-09-17 03:33 33 ************** 12 2016-09-17 03:34 33 ************** 13 2016-09-17 03:35 34 *************** 14 2016-09-17 03:36 34 *************** 15 2016-09-17 03:37 35 **************** ... ..( 3 skipped). .. **************** 19 2016-09-17 03:41 35 **************** 20 2016-09-17 03:42 36 ***************** 21 2016-09-17 03:43 36 ***************** 22 2016-09-17 03:44 36 ***************** 23 2016-09-17 03:45 37 ****************** 24 2016-09-17 03:46 37 ****************** 25 2016-09-17 03:47 38 ******************* ... ..( 2 skipped). .. ******************* 28 2016-09-17 03:50 38 ******************* 29 2016-09-17 03:51 39 ******************** ... ..( 3 skipped). .. ******************** 33 2016-09-17 03:55 39 ******************** 34 2016-09-17 03:56 40 ********************* ... ..( 5 skipped). .. ********************* 40 2016-09-17 04:02 40 ********************* 41 2016-09-17 04:03 41 ********************** ... ..( 6 skipped). .. ********************** 48 2016-09-17 04:10 41 ********************** 49 2016-09-17 04:11 42 *********************** ... ..( 4 skipped). .. *********************** 54 2016-09-17 04:16 42 *********************** 55 2016-09-17 04:17 43 ************************ ... ..( 10 skipped). .. ************************ 66 2016-09-17 04:28 43 ************************ 67 2016-09-17 04:29 44 ************************* ... ..( 8 skipped). .. ************************* 76 2016-09-17 04:38 44 ************************* 77 2016-09-17 04:39 43 ************************ 78 2016-09-17 04:40 42 *********************** 79 2016-09-17 04:41 42 *********************** 80 2016-09-17 04:42 41 ********************** ... ..( 2 skipped). .. ********************** 83 2016-09-17 04:45 41 ********************** 84 2016-09-17 04:46 40 ********************* 85 2016-09-17 04:47 40 ********************* 86 2016-09-17 04:48 40 ********************* 87 2016-09-17 04:49 39 ******************** 88 2016-09-17 04:50 39 ******************** 89 2016-09-17 04:51 38 ******************* 90 2016-09-17 04:52 38 ******************* 91 2016-09-17 04:53 38 ******************* 92 2016-09-17 04:54 37 ****************** 93 2016-09-17 04:55 37 ****************** 94 2016-09-17 04:56 37 ****************** 95 2016-09-17 04:57 36 ***************** ... ..( 5 skipped). .. ***************** 101 2016-09-17 05:03 36 ***************** 102 2016-09-17 05:04 35 **************** 103 2016-09-17 05:05 35 **************** 104 2016-09-17 05:06 35 **************** 105 2016-09-17 05:07 ? - 106 2016-09-17 05:08 34 *************** 107 2016-09-17 05:09 34 *************** 108 2016-09-17 05:10 34 *************** 109 2016-09-17 05:11 35 **************** ... ..( 2 skipped). .. **************** 112 2016-09-17 05:14 35 **************** 113 2016-09-17 05:15 36 ***************** 114 2016-09-17 05:16 36 ***************** 115 2016-09-17 05:17 37 ****************** 116 2016-09-17 05:18 37 ****************** 117 2016-09-17 05:19 38 ******************* 118 2016-09-17 05:20 38 ******************* 119 2016-09-17 05:21 39 ******************** 120 2016-09-17 05:22 39 ******************** 121 2016-09-17 05:23 39 ******************** 122 2016-09-17 05:24 40 ********************* ... ..( 6 skipped). .. ********************* 129 2016-09-17 05:31 40 ********************* 130 2016-09-17 05:32 41 ********************** ... ..( 2 skipped). .. ********************** 133 2016-09-17 05:35 41 ********************** 134 2016-09-17 05:36 42 *********************** 135 2016-09-17 05:37 42 *********************** 136 2016-09-17 05:38 42 *********************** 137 2016-09-17 05:39 43 ************************ 138 2016-09-17 05:40 43 ************************ 139 2016-09-17 05:41 42 *********************** 140 2016-09-17 05:42 41 ********************** ... ..( 2 skipped). .. ********************** 143 2016-09-17 05:45 41 ********************** 144 2016-09-17 05:46 40 ********************* 145 2016-09-17 05:47 40 ********************* 146 2016-09-17 05:48 39 ******************** 147 2016-09-17 05:49 39 ******************** 148 2016-09-17 05:50 38 ******************* 149 2016-09-17 05:51 38 ******************* 150 2016-09-17 05:52 38 ******************* 151 2016-09-17 05:53 37 ****************** 152 2016-09-17 05:54 37 ****************** 153 2016-09-17 05:55 36 ***************** ... ..( 5 skipped). .. ***************** 159 2016-09-17 06:01 36 ***************** 160 2016-09-17 06:02 35 **************** ... ..( 2 skipped). .. **************** 163 2016-09-17 06:05 35 **************** 164 2016-09-17 06:06 34 *************** ... ..( 2 skipped). .. *************** 167 2016-09-17 06:09 34 *************** 168 2016-09-17 06:10 33 ************** ... ..( 2 skipped). .. ************** 171 2016-09-17 06:13 33 ************** 172 2016-09-17 06:14 ? - 173 2016-09-17 06:15 33 ************** 174 2016-09-17 06:16 33 ************** 175 2016-09-17 06:17 ? - 176 2016-09-17 06:18 34 *************** 177 2016-09-17 06:19 34 *************** 178 2016-09-17 06:20 34 *************** 179 2016-09-17 06:21 35 **************** 180 2016-09-17 06:22 35 **************** 181 2016-09-17 06:23 35 **************** 182 2016-09-17 06:24 36 ***************** 183 2016-09-17 06:25 36 ***************** 184 2016-09-17 06:26 36 ***************** 185 2016-09-17 06:27 37 ****************** 186 2016-09-17 06:28 37 ****************** 187 2016-09-17 06:29 38 ******************* ... ..( 2 skipped). .. ******************* 190 2016-09-17 06:32 38 ******************* 191 2016-09-17 06:33 39 ******************** 192 2016-09-17 06:34 39 ******************** 193 2016-09-17 06:35 39 ******************** 194 2016-09-17 06:36 40 ********************* ... ..( 5 skipped). .. ********************* 200 2016-09-17 06:42 40 ********************* 201 2016-09-17 06:43 41 ********************** ... ..( 5 skipped). .. ********************** 207 2016-09-17 06:49 41 ********************** 208 2016-09-17 06:50 42 *********************** ... ..( 8 skipped). .. *********************** 217 2016-09-17 06:59 42 *********************** 218 2016-09-17 07:00 43 ************************ ... ..( 11 skipped). .. ************************ 230 2016-09-17 07:12 43 ************************ 231 2016-09-17 07:13 44 ************************* ... ..( 25 skipped). .. ************************* 257 2016-09-17 07:39 44 ************************* 258 2016-09-17 07:40 45 ************************** ... ..( 38 skipped). .. ************************** 297 2016-09-17 08:19 45 ************************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 201 Vendor specific /dev/sdc === START OF INFORMATION SECTION === Model Family: Western Digital Black Device Model: WDC WD1003FZEX-00MK2A0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1 000 204 886 016 bytes [1,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Sep 17 08:19:30 2016 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (11580) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 120) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 176 175 021 - 2200 4 Start_Stop_Count -O--CK 100 100 000 - 406 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 096 096 000 - 3279 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 398 192 Power-Off_Retract_Count -O--CK 200 200 000 - 37 193 Load_Cycle_Count -O--CK 200 200 000 - 370 194 Temperature_Celsius -O---K 121 098 000 - 22 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 22 Celsius Power Cycle Min/Max Temperature: 21/22 Celsius Lifetime Min/Max Temperature: 19/45 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (106) Index Estimated Time Temperature Celsius 107 2016-09-17 00:22 36 ***************** ... ..( 13 skipped). .. ***************** 121 2016-09-17 00:36 36 ***************** 122 2016-09-17 00:37 35 **************** ... ..( 46 skipped). .. **************** 169 2016-09-17 01:24 35 **************** 170 2016-09-17 01:25 34 *************** ... ..( 46 skipped). .. *************** 217 2016-09-17 02:12 34 *************** 218 2016-09-17 02:13 33 ************** ... ..( 9 skipped). .. ************** 228 2016-09-17 02:23 33 ************** 229 2016-09-17 02:24 34 *************** ... ..( 22 skipped). .. *************** 252 2016-09-17 02:47 34 *************** 253 2016-09-17 02:48 ? - 254 2016-09-17 02:49 21 ** 255 2016-09-17 02:50 21 ** 256 2016-09-17 02:51 22 *** 257 2016-09-17 02:52 34 *************** ... ..( 12 skipped). .. *************** 270 2016-09-17 03:05 34 *************** 271 2016-09-17 03:06 33 ************** ... ..( 40 skipped). .. ************** 312 2016-09-17 03:47 33 ************** 313 2016-09-17 03:48 34 *************** ... ..( 7 skipped). .. *************** 321 2016-09-17 03:56 34 *************** 322 2016-09-17 03:57 35 **************** ... ..(109 skipped). .. **************** 432 2016-09-17 05:47 35 **************** 433 2016-09-17 05:48 34 *************** ... ..( 9 skipped). .. *************** 443 2016-09-17 05:58 34 *************** 444 2016-09-17 05:59 ? - 445 2016-09-17 06:00 34 *************** ... ..( 17 skipped). .. *************** 463 2016-09-17 06:18 34 *************** 464 2016-09-17 06:19 35 **************** ... ..( 75 skipped). .. **************** 62 2016-09-17 07:35 35 **************** 63 2016-09-17 07:36 36 ***************** ... ..( 42 skipped). .. ***************** 106 2016-09-17 08:19 36 ***************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 209 Vendor specific /dev/sdd === START OF INFORMATION SECTION === Model Family: Seagate Desktop SSHD Device Model: ST1000DX001-1CM162 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: CC43 User Capacity: 1 000 204 886 016 bytes [1,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Sep 17 08:19:30 2016 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 575) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 106) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x1081) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 115 099 006 - 99903872 3 Spin_Up_Time PO---- 098 097 000 - 0 4 Start_Stop_Count -O--CK 098 098 020 - 2270 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 076 060 030 - 43060361 9 Power_On_Hours -O--CK 092 092 000 - 7373 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 099 099 020 - 1229 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 0 0 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 076 051 045 - 24 (Min/Max 22/24) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 461 193 Load_Cycle_Count -O--CK 090 090 000 - 20071 194 Temperature_Celsius -O---K 024 049 000 - 24 (0 20 0 0 0) 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 4873h+39m+26.031s 241 Total_LBAs_Written ------ 100 253 000 - 21039970719 242 Total_LBAs_Read ------ 100 253 000 - 21292050062 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 3900 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 4580 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL,SL VS 10 Device vendor specific log 0xc4 GPL,SL VS 5 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 22 Celsius Power Cycle Min/Max Temperature: 22/25 Celsius Lifetime Min/Max Temperature: 20/48 Celsius Under/Over Temperature Limit Count: 0/0 SCT Data Table command not supported SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sde === START OF INFORMATION SECTION === Model Family: Seagate Barracuda ES.2 Device Model: ST31000340NS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: SN03 User Capacity: 1 000 204 886 016 bytes [1,00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-6 T13/1410D revision 2 Local Time is: Sat Sep 17 08:19:30 2016 MSK ==> WARNING: There are known problems with these drives, see the following Seagate web pages: http://knowledge.seagate.com/articles/en_US/FAQ/207931en http://knowledge.seagate.com/articles/en_US/FAQ/207963en SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 634) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 239) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 107 094 006 - 13413993 3 Spin_Up_Time PO---- 092 086 000 - 0 4 Start_Stop_Count -O--CK 097 097 020 - 3947 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 1 7 Seek_Error_Rate POSR-- 066 051 030 - 150473273733 9 Power_On_Hours -O--CK 069 069 000 - 27790 10 Spin_Retry_Count PO--C- 100 100 097 - 19 12 Power_Cycle_Count -O--CK 098 037 020 - 2695 184 End-to-End_Error -O--CK 099 099 000 - 1 187 Reported_Uncorrect -O-RCK 001 001 000 - 295 188 Command_Timeout -O--CK 100 094 000 - 8 189 High_Fly_Writes -O---K 100 100 045 - 0 190 Airflow_Temperature_Cel -O--CK 077 045 000 - 23 (Min/Max 20/23) 194 Temperature_Celsius -O-RC- 023 055 000 - 23 (0 15 0 0 0) 195 Hardware_ECC_Recovered -O--C- 029 019 000 - 13413993 197 Current_Pending_Sector ----C- 100 100 000 - 1 198 Offline_Uncorrectable -OSRCK 100 100 000 - 1 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 5 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 SATA NCQ Queued Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 2819 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 295 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 295 [14] occurred at disk power-on lifetime: 24778 hours (1032 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 71 07 00 bd 2a 00 00 Error: UNC at LBA = 0x710700bd2a = 485448793386 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 e8 00 36 83 00 52 78 40 00 02:26:12.082 READ FPDMA QUEUED 60 00 00 01 00 00 71 06 00 bd d8 40 00 02:26:12.082 READ FPDMA QUEUED 60 00 00 01 00 00 71 05 00 bd d8 40 00 02:26:12.081 READ FPDMA QUEUED 60 00 00 01 00 00 71 04 00 bd d8 40 00 02:26:12.081 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 28 00 02:26:12.067 READ LOG EXT Error 294 [13] occurred at disk power-on lifetime: 24778 hours (1032 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 71 03 00 bd e2 00 00 Error: UNC at LBA = 0x710300bde2 = 485381684706 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 71 06 00 bd d8 40 00 02:26:10.272 READ FPDMA QUEUED 60 00 00 01 00 00 71 05 00 bd d8 40 00 02:26:10.272 READ FPDMA QUEUED 60 00 00 01 00 00 71 04 00 bd d8 40 00 02:26:10.271 READ FPDMA QUEUED 60 00 00 01 00 00 71 03 00 bd d8 40 00 02:26:10.271 READ FPDMA QUEUED 60 00 00 01 00 00 71 02 00 bd d8 40 00 02:26:10.271 READ FPDMA QUEUED Error 293 [12] occurred at disk power-on lifetime: 24778 hours (1032 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 71 0e 00 bd 56 00 00 Error: UNC at LBA = 0x710e00bd56 = 485566233942 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 71 0d 00 bd d8 40 00 02:26:08.316 READ FPDMA QUEUED 60 00 00 01 00 00 71 0c 00 bd d8 40 00 02:26:08.316 READ FPDMA QUEUED 60 00 00 01 00 00 71 0b 00 bd d8 40 00 02:26:08.314 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 28 00 02:26:08.178 READ LOG EXT 60 00 00 01 00 00 71 0d 00 bd d8 40 00 02:26:06.468 READ FPDMA QUEUED Error 292 [11] occurred at disk power-on lifetime: 24778 hours (1032 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 71 0b 00 bd 0e 00 00 Error: UNC at LBA = 0x710b00bd0e = 485515902222 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 71 0d 00 bd d8 40 00 02:26:06.468 READ FPDMA QUEUED 60 00 00 01 00 00 71 0c 00 bd d8 40 00 02:26:06.468 READ FPDMA QUEUED 60 00 00 01 00 00 71 0b 00 bd d8 40 00 02:26:06.468 READ FPDMA QUEUED 60 00 00 01 00 00 71 0a 00 bd d8 40 00 02:26:06.466 READ FPDMA QUEUED 61 00 00 00 08 00 1c 8c 00 ab 38 40 00 02:26:06.466 WRITE FPDMA QUEUED Error 291 [10] occurred at disk power-on lifetime: 24778 hours (1032 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 71 0a 00 bd 72 00 00 Error: UNC at LBA = 0x710a00bd72 = 485499125106 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 24 ed 00 47 00 40 00 02:26:04.857 READ FPDMA QUEUED 60 00 00 01 00 00 24 ec 00 47 00 40 00 02:26:04.856 READ FPDMA QUEUED 60 00 00 01 00 00 36 ee 00 58 78 40 00 02:26:04.855 READ FPDMA QUEUED 60 00 00 01 00 00 71 10 00 bd d8 40 00 02:26:04.853 READ FPDMA QUEUED 60 00 00 01 00 00 71 0f 00 bd d8 40 00 02:26:04.853 READ FPDMA QUEUED Error 290 [9] occurred at disk power-on lifetime: 24778 hours (1032 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 71 1f 00 bd 54 00 00 Error: UNC at LBA = 0x711f00bd54 = 485851446612 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 71 20 00 bd d8 40 00 02:26:02.999 READ FPDMA QUEUED 60 00 00 01 00 00 71 1f 00 bd d8 40 00 02:26:02.999 READ FPDMA QUEUED 60 00 00 01 00 00 71 1e 00 bd d8 40 00 02:26:02.997 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 28 00 02:26:02.913 READ LOG EXT 60 00 00 01 00 00 71 1f 00 bd d8 40 00 02:26:01.155 READ FPDMA QUEUED Error 289 [8] occurred at disk power-on lifetime: 24778 hours (1032 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 71 1e 00 bd b8 00 00 Error: UNC at LBA = 0x711e00bdb8 = 485834669496 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 71 1f 00 bd d8 40 00 02:26:01.155 READ FPDMA QUEUED 60 00 00 01 00 00 71 1e 00 bd d8 40 00 02:26:01.155 READ FPDMA QUEUED 60 00 00 01 00 00 71 1d 00 bd d8 40 00 02:26:01.155 READ FPDMA QUEUED 60 00 00 01 00 00 71 1c 00 bd d8 40 00 02:26:01.153 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 28 00 02:26:01.065 READ LOG EXT Error 288 [7] occurred at disk power-on lifetime: 24778 hours (1032 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 71 1c 00 bd 0c 00 00 Error: UNC at LBA = 0x711c00bd0c = 485801114892 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 71 1e 00 bd d8 40 00 02:25:59.317 READ FPDMA QUEUED 60 00 00 01 00 00 36 ed 00 58 78 40 00 02:25:59.317 READ FPDMA QUEUED 60 00 00 01 00 00 71 1d 00 bd d8 40 00 02:25:59.316 READ FPDMA QUEUED 60 00 00 01 00 00 71 1c 00 bd d8 40 00 02:25:59.316 READ FPDMA QUEUED 60 00 00 01 00 00 71 1b 00 bd d8 40 00 02:25:59.314 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Aborted by host 90% 365 - # 2 Short offline Aborted by host 90% 337 - # 3 Short offline Aborted by host 90% 327 - # 4 Short offline Aborted by host 90% 251 - # 5 Short offline Aborted by host 90% 227 - # 6 Short offline Aborted by host 90% 196 - # 7 Short offline Aborted by host 90% 172 - # 8 Short offline Aborted by host 90% 172 - # 9 Short offline Aborted by host 90% 83 - #10 Short offline Aborted by host 90% 56 - #11 Short offline Aborted by host 90% 51 - #12 Short offline Aborted by host 90% 45 - #13 Short offline Aborted by host 90% 43 - #14 Short offline Aborted by host 90% 31 - #15 Short offline Aborted by host 90% 31 - #16 Short offline Aborted by host 90% 27 - #17 Short offline Aborted by host 90% 17 - #18 Short offline Aborted by host 90% 17 - #19 Short offline Aborted by host 90% 16 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 22 Celsius Power Cycle Min/Max Temperature: 20/22 Celsius Lifetime Min/Max Temperature: 15/55 Celsius Under/Over Temperature Limit Count: 0/4 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 128 (123) Index Estimated Time Temperature Celsius 124 2016-09-17 06:12 43 ************************ ... ..( 63 skipped). .. ************************ 60 2016-09-17 07:16 43 ************************ 61 2016-09-17 07:17 30 *********** 62 2016-09-17 07:18 31 ************ 63 2016-09-17 07:19 31 ************ 64 2016-09-17 07:20 32 ************* 65 2016-09-17 07:21 32 ************* 66 2016-09-17 07:22 33 ************** 67 2016-09-17 07:23 33 ************** 68 2016-09-17 07:24 34 *************** 69 2016-09-17 07:25 34 *************** 70 2016-09-17 07:26 35 **************** 71 2016-09-17 07:27 35 **************** 72 2016-09-17 07:28 35 **************** 73 2016-09-17 07:29 36 ***************** 74 2016-09-17 07:30 36 ***************** 75 2016-09-17 07:31 36 ***************** 76 2016-09-17 07:32 37 ****************** ... ..( 2 skipped). .. ****************** 79 2016-09-17 07:35 37 ****************** 80 2016-09-17 07:36 29 ********** 81 2016-09-17 07:37 29 ********** 82 2016-09-17 07:38 30 *********** 83 2016-09-17 07:39 30 *********** 84 2016-09-17 07:40 31 ************ 85 2016-09-17 07:41 31 ************ 86 2016-09-17 07:42 32 ************* 87 2016-09-17 07:43 33 ************** 88 2016-09-17 07:44 33 ************** 89 2016-09-17 07:45 33 ************** 90 2016-09-17 07:46 34 *************** 91 2016-09-17 07:47 34 *************** 92 2016-09-17 07:48 34 *************** 93 2016-09-17 07:49 35 **************** 94 2016-09-17 07:50 35 **************** 95 2016-09-17 07:51 35 **************** 96 2016-09-17 07:52 36 ***************** 97 2016-09-17 07:53 36 ***************** 98 2016-09-17 07:54 36 ***************** 99 2016-09-17 07:55 37 ****************** ... ..( 2 skipped). .. ****************** 102 2016-09-17 07:58 37 ****************** 103 2016-09-17 07:59 38 ******************* ... ..( 3 skipped). .. ******************* 107 2016-09-17 08:03 38 ******************* 108 2016-09-17 08:04 39 ******************** ... ..( 4 skipped). .. ******************** 113 2016-09-17 08:09 39 ******************** 114 2016-09-17 08:10 40 ********************* ... ..( 3 skipped). .. ********************* 118 2016-09-17 08:14 40 ********************* 119 2016-09-17 08:15 ? - 120 2016-09-17 08:16 20 * 121 2016-09-17 08:17 20 * 122 2016-09-17 08:18 21 ** 123 2016-09-17 08:19 22 *** SCT Error Recovery Control: Read: 60 (6,0 seconds) Write: 60 (6,0 seconds) Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdf === START OF INFORMATION SECTION === Model Family: Western Digital RE3 Serial ATA Device Model: WDC WD1002FBYS-43P1B0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 07.00L07 User Capacity: 1 000 204 886 016 bytes [1,00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.5, 3.0 Gb/s Local Time is: Sat Sep 17 08:19:30 2016 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 128 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (19200) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 221) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 253 253 021 - 6083 4 Start_Stop_Count -O--CK 097 097 000 - 3983 5 Reallocated_Sector_Ct PO--CK 194 194 140 - 46 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 075 075 000 - 18812 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2340 192 Power-Off_Retract_Count -O--CK 199 199 000 - 1331 193 Load_Cycle_Count -O--CK 199 199 000 - 3976 194 Temperature_Celsius -O---K 125 096 000 - 25 195 Hardware_ECC_Recovered -OS-CK 001 001 000 - 29951416 196 Reallocated_Event_Count -O--CK 175 175 000 - 25 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 173 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 173 [4] occurred at disk power-on lifetime: 6451 hours (268 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 53 00 10 00 00 00 00 00 00 00 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 4f 00 c2 e0 00 00 00:05:08.754 SMART WRITE LOG c8 00 00 00 08 00 00 10 00 00 00 e0 00 00:02:28.143 READ DMA c8 00 00 00 08 00 00 00 00 00 20 e0 00 00:02:28.143 READ DMA c8 00 00 00 08 00 00 02 00 00 00 e0 00 00:02:28.143 READ DMA c8 00 00 00 08 00 00 03 00 00 f8 e0 00 00:02:28.142 READ DMA Error 172 [3] occurred at disk power-on lifetime: 2474 hours (103 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 28 00 03 10 e0 00 Error: UNC at LBA = 0x28000310 = 671089424 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 24 00 00 00 08 00 00 28 00 03 10 e0 00 00:03:42.771 READ SECTOR(S) EXT 24 00 00 00 08 00 00 28 00 63 00 e0 00 00:03:42.766 READ SECTOR(S) EXT 24 00 00 00 01 00 00 28 00 03 00 e0 00 00:03:42.760 READ SECTOR(S) EXT ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:03:42.759 IDENTIFY DEVICE 24 00 00 00 04 00 00 28 00 03 40 e0 00 00:03:42.741 READ SECTOR(S) EXT Error 171 [2] occurred at disk power-on lifetime: 2474 hours (103 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 28 00 03 00 e0 00 Error: UNC at LBA = 0x28000300 = 671089408 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 24 00 00 00 01 00 00 28 00 03 00 e0 00 00:03:35.748 READ SECTOR(S) EXT 24 00 00 00 01 00 00 28 00 03 00 e0 00 00:03:28.753 READ SECTOR(S) EXT ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:03:28.075 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:03:28.074 IDENTIFY DEVICE ea 00 00 00 00 00 00 00 08 00 00 e0 00 00:03:21.080 FLUSH CACHE EXT Error 170 [1] occurred at disk power-on lifetime: 2474 hours (103 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 28 00 03 00 e0 00 Error: UNC at LBA = 0x28000300 = 671089408 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 24 00 00 00 01 00 00 28 00 03 00 e0 00 00:03:28.753 READ SECTOR(S) EXT ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:03:28.075 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:03:28.074 IDENTIFY DEVICE ea 00 00 00 00 00 00 00 08 00 00 e0 00 00:03:21.080 FLUSH CACHE EXT 24 00 00 01 00 00 00 29 00 03 00 e0 00 00:03:14.079 READ SECTOR(S) EXT Error 169 [0] occurred at disk power-on lifetime: 2474 hours (103 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 a7 df 00 f7 38 a7 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ea 00 00 00 00 00 00 00 08 00 00 e0 00 00:03:21.080 FLUSH CACHE EXT 24 00 00 01 00 00 00 29 00 03 00 e0 00 00:03:14.079 READ SECTOR(S) EXT 24 00 00 01 00 00 00 28 00 03 00 e0 00 00:03:13.984 READ SECTOR(S) EXT 24 00 00 00 02 00 00 28 00 03 10 e0 00 00:03:13.972 READ SECTOR(S) EXT 24 00 00 00 02 00 00 28 00 63 00 e0 00 00:03:13.971 READ SECTOR(S) EXT Error 168 [23] occurred at disk power-on lifetime: 2474 hours (103 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 29 00 03 00 e0 00 Error: UNC at LBA = 0x29000300 = 687866624 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 24 00 00 01 00 00 00 29 00 03 00 e0 00 00:03:14.079 READ SECTOR(S) EXT 24 00 00 01 00 00 00 28 00 03 00 e0 00 00:03:13.984 READ SECTOR(S) EXT 24 00 00 00 02 00 00 28 00 03 10 e0 00 00:03:13.972 READ SECTOR(S) EXT 24 00 00 00 02 00 00 28 00 63 00 e0 00 00:03:13.971 READ SECTOR(S) EXT 34 00 00 00 08 00 00 28 00 63 00 e0 00 00:03:13.968 WRITE SECTORS(S) EXT Error 167 [22] occurred at disk power-on lifetime: 2474 hours (103 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 28 00 63 00 e0 00 Error: UNC at LBA = 0x28006300 = 671113984 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 24 00 00 00 08 00 00 28 00 63 00 e0 00 00:02:53.554 READ SECTOR(S) EXT 24 00 00 00 08 00 00 28 00 63 00 e0 00 00:02:46.552 READ SECTOR(S) EXT 24 00 00 00 08 00 00 28 00 63 08 e0 00 00:02:39.539 READ SECTOR(S) EXT 24 00 00 00 08 00 00 28 00 63 08 e0 00 00:02:32.545 READ SECTOR(S) EXT 24 00 00 00 08 00 00 29 00 03 10 e0 00 00:02:32.542 READ SECTOR(S) EXT Error 166 [21] occurred at disk power-on lifetime: 2474 hours (103 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 28 00 63 00 e0 00 Error: UNC at LBA = 0x28006300 = 671113984 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 24 00 00 00 08 00 00 28 00 63 00 e0 00 00:02:46.552 READ SECTOR(S) EXT 24 00 00 00 08 00 00 28 00 63 08 e0 00 00:02:39.539 READ SECTOR(S) EXT 24 00 00 00 08 00 00 28 00 63 08 e0 00 00:02:32.545 READ SECTOR(S) EXT 24 00 00 00 08 00 00 29 00 03 10 e0 00 00:02:32.542 READ SECTOR(S) EXT 24 00 00 00 08 00 00 29 00 03 08 e0 00 00:02:32.539 READ SECTOR(S) EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 25 Celsius Power Cycle Min/Max Temperature: 23/25 Celsius Lifetime Min/Max Temperature: 24/54 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (65535) Invalid Temperature History Size or Index SCT Error Recovery Control: Read: 70 (7,0 seconds) Write: 70 (7,0 seconds) Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x8000 4 213 Vendor specific