/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-21-amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8 (AF) Device Model: ST750LM022 HN-M750MBB Serial Number: -- LU WWN Device Id: 5 0004cf ... Firmware Version: 2AR10002 User Capacity: 750,156,374,016 bytes [750 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sun Apr 23 10:29:38 2023 +03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: FAILED! Drive failure expected in less than 24 hours. SAVE ALL DATA. See vendor-specific Attribute list for failed Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 137) The previous self-test completed having a test element that failed and the device is suspected of having handling damage. Total time to complete Offline data collection: ( 9660) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 161) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 001 001 051 NOW 312515 2 Throughput_Performance POS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 089 089 025 - 3456 4 Start_Stop_Count -O--CK 094 094 000 - 6929 5 Reallocated_Sector_Ct PO--CK 098 098 010 - 416 7 Seek_Error_Rate POSR-K 252 252 051 - 0 8 Seek_Time_Performance P-S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 33706 10 Spin_Retry_Count PO--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 099 099 000 - 1049 12 Power_Cycle_Count -O--CK 093 093 000 - 7197 181 Program_Fail_Cnt_Total -O---K 096 096 000 - 106753786 183 Runtime_Bad_Block -O--CK 100 100 010 - 4 184 End-to-End_Error PO--CK 252 252 048 - 0 186 Unknown_Attribute -O--CK 252 252 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 36278 188 Command_Timeout -O--CK 100 100 000 - 41 190 Airflow_Temperature_Cel -O---- 067 049 040 - 33 (Min/Max 9/52) 191 G-Sense_Error_Rate -O---K 100 100 000 - 348 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 193 Load_Cycle_Count -O--CK 083 083 000 - 181213 194 Temperature_Celsius -O---- 064 049 000 - 33 (Min/Max 9/52) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 098 098 000 - 416 197 Current_Pending_Sector -O--CK 080 079 000 - 3302 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 001 001 000 - 106046 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 36739 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 36739 [2] occurred at disk power-on lifetime: 33620 hours (1400 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 a0 00 00 39 47 bc 60 40 00 Error: UNC at LBA = 0x3947bc60 = 961002592 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 18 d6 c8 98 40 08 00:00:04.508 READ FPDMA QUEUED 60 00 00 01 00 00 00 39 47 bc 00 40 08 00:00:04.506 READ FPDMA QUEUED 60 00 00 00 20 00 00 19 5a d5 a0 40 08 00:00:04.506 READ FPDMA QUEUED 60 00 00 01 00 00 00 39 47 bc 00 40 08 00:00:04.506 READ FPDMA QUEUED 60 00 00 00 18 00 00 19 56 cf 00 40 08 00:00:04.506 READ FPDMA QUEUED Error 36738 [1] occurred at disk power-on lifetime: 33620 hours (1400 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 a0 00 00 39 47 bc 60 40 00 Error: UNC at LBA = 0x3947bc60 = 961002592 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 39 47 bc 00 40 08 00:00:04.497 READ FPDMA QUEUED 60 00 00 01 00 00 00 39 47 bc 00 40 08 00:00:04.499 READ FPDMA QUEUED 60 00 00 01 00 00 00 3c ef b6 00 40 08 00:00:04.499 READ FPDMA QUEUED 60 00 00 01 00 00 00 3c ef b7 00 40 08 00:00:04.499 READ FPDMA QUEUED 60 00 00 00 c0 00 00 3c ef b4 40 40 08 00:00:04.499 READ FPDMA QUEUED Error 36737 [0] occurred at disk power-on lifetime: 33620 hours (1400 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 a0 00 00 39 47 bc 60 40 00 Error: UNC at LBA = 0x3947bc60 = 961002592 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 39 47 bc 00 40 08 00:00:04.491 READ FPDMA QUEUED 60 00 00 01 00 00 00 39 47 bc 00 40 08 00:00:04.493 READ FPDMA QUEUED 60 00 00 01 00 00 00 3c ef b6 00 40 08 00:00:04.493 READ FPDMA QUEUED 60 00 00 01 00 00 00 3c ef b7 00 40 08 00:00:04.493 READ FPDMA QUEUED 60 00 00 00 c0 00 00 3c ef b4 40 40 08 00:00:04.493 READ FPDMA QUEUED Error 36736 [7] occurred at disk power-on lifetime: 33620 hours (1400 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 a0 00 00 39 47 bc 60 40 00 Error: UNC at LBA = 0x3947bc60 = 961002592 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 10 01 00 00 00 39 47 bc 00 40 08 00:00:04.482 READ FPDMA QUEUED 60 00 00 01 00 00 00 39 47 bc 00 40 08 00:00:04.484 READ FPDMA QUEUED 60 00 00 01 00 00 00 3c ef b6 00 40 08 00:00:04.484 READ FPDMA QUEUED 60 00 00 01 00 00 00 3c ef b7 00 40 08 00:00:04.484 READ FPDMA QUEUED 60 00 00 00 c0 00 00 3c ef b4 40 40 08 00:00:04.484 READ FPDMA QUEUED Error 36735 [6] occurred at disk power-on lifetime: 33620 hours (1400 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 a0 00 00 39 47 bc 60 40 00 Error: UNC at LBA = 0x3947bc60 = 961002592 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 39 47 bc 00 40 08 00:00:04.476 READ FPDMA QUEUED 60 00 10 01 00 00 00 39 47 bc 00 40 08 00:00:04.480 READ FPDMA QUEUED 60 00 10 01 00 00 00 3c ef b6 00 40 08 00:00:04.480 READ FPDMA QUEUED 60 00 10 01 00 00 00 3c ef b7 00 40 08 00:00:04.480 READ FPDMA QUEUED 60 00 10 00 c0 00 00 3c ef b4 40 40 08 00:00:04.480 READ FPDMA QUEUED Error 36734 [5] occurred at disk power-on lifetime: 33620 hours (1400 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 a0 00 00 39 47 bc 60 40 00 Error: UNC at LBA = 0x3947bc60 = 961002592 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 39 47 bc 00 40 08 00:00:04.475 READ FPDMA QUEUED 60 00 00 01 00 00 00 39 47 bc 00 40 08 00:00:04.478 READ FPDMA QUEUED 60 00 00 01 00 00 00 3c ef b6 00 40 08 00:00:04.478 READ FPDMA QUEUED 60 00 00 01 00 00 00 3c ef b7 00 40 08 00:00:04.478 READ FPDMA QUEUED 60 00 00 00 c0 00 00 3c ef b4 40 40 08 00:00:04.478 READ FPDMA QUEUED Error 36733 [4] occurred at disk power-on lifetime: 33620 hours (1400 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 a0 00 00 39 47 bc 60 40 00 Error: UNC at LBA = 0x3947bc60 = 961002592 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 10 01 00 00 00 39 47 bc 00 40 08 00:00:04.431 READ FPDMA QUEUED 60 00 00 01 00 00 00 39 47 bc 00 40 08 00:00:04.433 READ FPDMA QUEUED 60 00 00 01 00 00 00 3c ef b6 00 40 08 00:00:04.433 READ FPDMA QUEUED 60 00 00 01 00 00 00 3c ef b7 00 40 08 00:00:04.433 READ FPDMA QUEUED 60 00 00 00 c0 00 00 3c ef b4 40 40 08 00:00:04.433 READ FPDMA QUEUED Error 36732 [3] occurred at disk power-on lifetime: 33620 hours (1400 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 a0 00 00 39 47 bc 60 40 00 Error: UNC at LBA = 0x3947bc60 = 961002592 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 39 47 bc 00 40 08 00:00:04.426 READ FPDMA QUEUED 60 00 00 01 00 00 00 39 47 bc 00 40 08 00:00:04.429 READ FPDMA QUEUED 60 00 00 01 00 00 00 3c ef b6 00 40 08 00:00:04.429 READ FPDMA QUEUED 60 00 00 01 00 00 00 3c ef b7 00 40 08 00:00:04.429 READ FPDMA QUEUED 60 00 00 00 c0 00 00 3c ef b4 40 40 08 00:00:04.429 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: handling damage?? 90% 32827 0 # 2 Short offline Completed: handling damage?? 90% 32754 0 # 3 Short offline Completed: handling damage?? 90% 32753 0 # 4 Short offline Completed: handling damage?? 90% 32753 0 # 5 Extended offline Completed: handling damage?? 90% 29366 0 # 6 Extended offline Completed: handling damage?? 90% 29366 0 # 7 Short offline Completed: handling damage?? 90% 29366 0 # 8 Short offline Completed: handling damage?? 90% 29366 0 # 9 Short offline Completed: handling damage?? 90% 29366 0 #10 Extended offline Completed: handling damage?? 90% 29366 0 #11 Extended offline Completed: read failure 90% 29323 10008216 #12 Extended offline Completed: read failure 90% 29323 10008216 #13 Extended offline Interrupted (host reset) 90% 29312 - #14 Extended offline Aborted by host 90% 29312 - #15 Short offline Completed: read failure 90% 29311 669940416 #16 Short offline Completed: read failure 90% 29309 669940416 #17 Extended offline Aborted by host 90% 28367 - #18 Short offline Completed: read failure 90% 28349 59872552 #19 Extended offline Aborted by host 90% 28349 - #20 Extended offline Completed: read failure 90% 28280 59872552 #21 Short offline Completed without error 00% 25884 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed_handling_damage?? [90% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 20/33 Celsius Lifetime Min/Max Temperature: 9/52 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (84) Index Estimated Time Temperature Celsius 85 2023-04-22 23:50 33 ************** 86 2023-04-22 23:55 31 ************ ... ..( 7 skipped). .. ************ 94 2023-04-23 00:35 31 ************ 95 2023-04-23 00:40 30 *********** ... ..( 43 skipped). .. *********** 11 2023-04-23 04:20 30 *********** 12 2023-04-23 04:25 29 ********** ... ..( 26 skipped). .. ********** 39 2023-04-23 06:40 29 ********** 40 2023-04-23 06:45 30 *********** ... ..( 14 skipped). .. *********** 55 2023-04-23 08:00 30 *********** 56 2023-04-23 08:05 31 ************ 57 2023-04-23 08:10 31 ************ 58 2023-04-23 08:15 30 *********** 59 2023-04-23 08:20 31 ************ 60 2023-04-23 08:25 31 ************ 61 2023-04-23 08:30 30 *********** ... ..( 10 skipped). .. *********** 72 2023-04-23 09:25 30 *********** 73 2023-04-23 09:30 29 ********** ... ..( 2 skipped). .. ********** 76 2023-04-23 09:45 29 ********** 77 2023-04-23 09:50 30 *********** 78 2023-04-23 09:55 31 ************ 79 2023-04-23 10:00 31 ************ 80 2023-04-23 10:05 31 ************ 81 2023-04-23 10:10 32 ************* 82 2023-04-23 10:15 32 ************* 83 2023-04-23 10:20 33 ************** 84 2023-04-23 10:25 33 ************** SCT Error Recovery Control: Read: 85 (8.5 seconds) Write: 85 (8.5 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 26524 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 1 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific