/dev/sda smartctl 7.1 2019-12-30 r5022 [i686-linux-5.4.83-generic-2rosa-i586] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SAMSUNG SP0411N Serial Number: -- Firmware Version: TW100-08 User Capacity: 40,060,403,712 bytes [40.0 GB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA/ATAPI-7 T13/1532D revision 0 Local Time is: Thu Nov 4 21:10:11 2021 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 128 (quiet), recommended: 254 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 900) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 15) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 051 - 0 3 Spin_Up_Time POS--- 074 063 000 - 4736 4 Start_Stop_Count -O--CK 099 099 000 - 1876 5 Reallocated_Sector_Ct PO--CK 253 253 010 - 0 7 Seek_Error_Rate PO-R-- 253 253 051 - 0 8 Seek_Time_Performance --S--K 253 253 000 - 0 9 Power_On_Hours -O--CK 099 099 000 - 897551 10 Spin_Retry_Count PO--C- 253 253 049 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1647 194 Temperature_Celsius -O---K 166 106 000 - 24 195 Hardware_ECC_Recovered -O-R-- 100 100 000 - 89536112 196 Reallocated_Event_Count -O--C- 253 253 000 - 0 197 Current_Pending_Sector PO--CK 253 253 010 - 0 198 Offline_Uncorrectable P---CK 253 253 010 - 0 199 UDMA_CRC_Error_Count PO-R-- 100 100 051 - 0 200 Multi_Zone_Error_Rate PO-R-- 100 100 051 - 0 201 Soft_Read_Error_Rate PO-R-- 100 100 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory not supported SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x06 SL R/O 2 SMART self-test log 0x80-0x9f SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 No Errors Logged SMART Extended Self-test Log (GP Log 0x07) not supported Warning! SMART Self-Test Log Structure error: invalid SMART checksum. SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) not supported /dev/sdb smartctl 7.1 2019-12-30 r5022 [i686-linux-5.4.83-generic-2rosa-i586] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint P80 SD Device Model: SAMSUNG HD080HJ Serial Number: -- Firmware Version: WT100-33 User Capacity: 80,026,361,856 bytes [80.0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 T13/1532D revision 4a Local Time is: Thu Nov 4 21:10:11 2021 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 1872) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 31) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 099 051 - 1 3 Spin_Up_Time POS--- 100 100 025 - 4224 4 Start_Stop_Count -O--CK 079 079 000 - 21691 5 Reallocated_Sector_Ct PO--CK 097 097 010 - 28 7 Seek_Error_Rate POSR-- 253 253 051 - 0 8 Seek_Time_Performance P-S--K 253 253 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 22980 10 Spin_Retry_Count PO--CK 253 253 051 - 0 11 Calibration_Retry_Count -O--C- 253 100 000 - 0 12 Power_Cycle_Count -O--CK 090 090 000 - 10626 190 Airflow_Temperature_Cel -O---K 130 073 000 - 36 194 Temperature_Celsius -O---K 130 073 000 - 36 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 91315 196 Reallocated_Event_Count -O--CK 097 097 000 - 28 197 Current_Pending_Sector -O--C- 253 100 000 - 0 198 Offline_Uncorrectable ----CK 253 253 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-- 253 100 000 - 0 201 Soft_Read_Error_Rate -O-R-- 253 100 000 - 0 202 Data_Address_Mark_Errs -O--CK 253 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 2 SMART self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Invalid Error Log index = 0x0000, trying reserved byte (0x07) instead Device Error Count: 239 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 239 [6] occurred at disk power-on lifetime: 10663 hours (444 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 04 00 00 6d d1 00 d8 e2 00 Error: UNC at LBA = 0x6fd100d8 = 1875968216 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 40 00 00 00 04 00 00 00 6d d1 d8 e2 00 03:01:28.750 READ VERIFY SECTOR(S) 40 00 00 00 04 00 00 00 6d d1 d4 e2 00 03:01:28.750 READ VERIFY SECTOR(S) c8 00 00 00 01 00 00 00 00 00 00 e0 00 03:01:28.750 READ DMA 40 00 00 00 08 00 00 00 6d d1 dc e2 00 03:01:28.750 READ VERIFY SECTOR(S) c8 00 00 00 01 00 00 00 00 00 00 e0 00 03:01:28.750 READ DMA Error 238 [5] occurred at disk power-on lifetime: 10663 hours (444 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 6d d1 00 d4 e2 00 Error: UNC at LBA = 0x6fd100d4 = 1875968212 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 40 00 00 00 08 00 00 00 6d d1 d4 e2 00 03:01:27.000 READ VERIFY SECTOR(S) c8 00 00 00 01 00 00 00 00 00 00 e0 00 03:01:27.000 READ DMA Error 237 [4] occurred at disk power-on lifetime: 10663 hours (444 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 10 00 00 6d d1 00 d4 e2 00 Error: UNC at LBA = 0x6fd100d4 = 1875968212 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 40 00 00 00 10 00 00 00 6d d1 d4 e2 00 03:01:25.188 READ VERIFY SECTOR(S) 40 00 00 00 10 00 00 00 6d d1 c4 e2 00 03:01:25.188 READ VERIFY SECTOR(S) 40 00 00 00 20 00 00 00 6d d1 e4 e2 00 03:01:25.188 READ VERIFY SECTOR(S) c8 00 00 00 01 00 00 00 00 00 00 e0 00 03:01:25.188 READ DMA Error 236 [3] occurred at disk power-on lifetime: 10663 hours (444 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 02 00 00 6d d1 00 da e2 00 Error: UNC at LBA = 0x6fd100da = 1875968218 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 40 00 00 00 02 00 00 00 6d d1 da e2 00 03:01:30.563 READ VERIFY SECTOR(S) c8 00 00 00 01 00 00 00 00 00 00 e0 00 03:01:30.563 READ DMA 40 00 00 00 02 00 00 00 6d d1 d8 e2 00 03:01:30.563 READ VERIFY SECTOR(S) c8 00 00 00 01 00 00 00 00 00 00 e0 00 03:01:30.563 READ DMA Error 235 [2] occurred at disk power-on lifetime: 10663 hours (444 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 04 00 00 6d d1 00 d8 e2 00 Error: UNC at LBA = 0x6fd100d8 = 1875968216 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 40 00 00 00 04 00 00 00 6d d1 d8 e2 00 03:01:28.750 READ VERIFY SECTOR(S) 40 00 00 00 04 00 00 00 6d d1 d4 e2 00 03:01:28.750 READ VERIFY SECTOR(S) c8 00 00 00 01 00 00 00 00 00 00 e0 00 03:01:28.750 READ DMA 40 00 00 00 08 00 00 00 6d d1 dc e2 00 03:01:28.750 READ VERIFY SECTOR(S) c8 00 00 00 01 00 00 00 00 00 00 e0 00 03:01:28.750 READ DMA Error 234 [1] occurred at disk power-on lifetime: 10663 hours (444 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 6d d1 00 d4 e2 00 Error: UNC at LBA = 0x6fd100d4 = 1875968212 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 40 00 00 00 08 00 00 00 6d d1 d4 e2 00 03:01:27.000 READ VERIFY SECTOR(S) c8 00 00 00 01 00 00 00 00 00 00 e0 00 03:01:27.000 READ DMA Error 233 [0] occurred at disk power-on lifetime: 10663 hours (444 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 10 00 00 6d d1 00 d4 e2 00 Error: UNC at LBA = 0x6fd100d4 = 1875968212 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 40 00 00 00 10 00 00 00 6d d1 d4 e2 00 03:01:25.188 READ VERIFY SECTOR(S) 40 00 00 00 10 00 00 00 6d d1 c4 e2 00 03:01:25.188 READ VERIFY SECTOR(S) 40 00 00 00 20 00 00 00 6d d1 e4 e2 00 03:01:25.188 READ VERIFY SECTOR(S) c8 00 00 00 01 00 00 00 00 00 00 e0 00 03:01:25.188 READ DMA Error 232 [7] occurred at disk power-on lifetime: 10663 hours (444 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 02 00 00 6d d1 00 da e2 00 Error: UNC at LBA = 0x6fd100da = 1875968218 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 40 00 00 00 02 00 00 00 6d d1 da e2 00 03:01:30.563 READ VERIFY SECTOR(S) c8 00 00 00 01 00 00 00 00 00 00 e0 00 03:01:30.563 READ DMA 40 00 00 00 02 00 00 00 6d d1 d8 e2 00 03:01:30.563 READ VERIFY SECTOR(S) c8 00 00 00 01 00 00 00 00 00 00 e0 00 03:01:30.563 READ DMA SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: --/39 Celsius Lifetime Min/Max Temperature: --/54 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 10/55 Celsius Min/Max Temperature Limit: 5/60 Celsius Temperature History Size (Index): 128 (105) Index Estimated Time Temperature Celsius 106 2021-11-04 19:03 38 ******************* ... ..( 3 skipped). .. ******************* 110 2021-11-04 19:07 38 ******************* 111 2021-11-04 19:08 ? - 112 2021-11-04 19:09 41 ********************** 113 2021-11-04 19:10 43 ************************ 114 2021-11-04 19:11 37 ****************** 115 2021-11-04 19:12 39 ******************** ... ..( 2 skipped). .. ******************** 118 2021-11-04 19:15 39 ******************** 119 2021-11-04 19:16 37 ****************** 120 2021-11-04 19:17 36 ***************** 121 2021-11-04 19:18 38 ******************* ... ..( 18 skipped). .. ******************* 12 2021-11-04 19:37 38 ******************* 13 2021-11-04 19:38 40 ********************* ... ..( 3 skipped). .. ********************* 17 2021-11-04 19:42 40 ********************* 18 2021-11-04 19:43 38 ******************* ... ..( 3 skipped). .. ******************* 22 2021-11-04 19:47 38 ******************* 23 2021-11-04 19:48 42 *********************** ... ..( 3 skipped). .. *********************** 27 2021-11-04 19:52 42 *********************** 28 2021-11-04 19:53 36 ***************** ... ..( 3 skipped). .. ***************** 32 2021-11-04 19:57 36 ***************** 33 2021-11-04 19:58 38 ******************* ... ..( 3 skipped). .. ******************* 37 2021-11-04 20:02 38 ******************* 38 2021-11-04 20:03 36 ***************** ... ..( 3 skipped). .. ***************** 42 2021-11-04 20:07 36 ***************** 43 2021-11-04 20:08 38 ******************* ... ..( 3 skipped). .. ******************* 47 2021-11-04 20:12 38 ******************* 48 2021-11-04 20:13 36 ***************** ... ..( 46 skipped). .. ***************** 95 2021-11-04 21:00 36 ***************** 96 2021-11-04 21:01 ? - 97 2021-11-04 21:02 39 ******************** 98 2021-11-04 21:03 39 ******************** 99 2021-11-04 21:04 39 ******************** 100 2021-11-04 21:05 35 **************** 101 2021-11-04 21:06 37 ****************** ... ..( 2 skipped). .. ****************** 104 2021-11-04 21:09 37 ****************** 105 2021-11-04 21:10 36 ***************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x8001 2 0 Vendor specific /dev/sdc smartctl 7.1 2019-12-30 r5022 [i686-linux-5.4.83-generic-2rosa-i586] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: KINGSTON SKC600512G Serial Number: -- LU WWN Device Id: 5 0026b7 ... Firmware Version: S4200102 User Capacity: 512,110,190,592 bytes [512 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Nov 4 21:10:11 2021 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Read SCT Status failed: scsi error badly formed scsi parameters Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0031) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 9 Power_On_Hours ------ 100 100 000 - 685 12 Power_Cycle_Count ------ 100 100 000 - 627 148 Unknown_Attribute ------ 100 100 000 - 1873 149 Unknown_Attribute ------ 100 100 000 - 230 150 Unknown_Attribute ------ 100 100 000 - 0 151 Unknown_Attribute ------ 100 100 000 - 124 159 Unknown_Attribute ------ 100 100 000 - 0 160 Unknown_Attribute ------ 100 100 000 - 0 161 Unknown_Attribute ------ 100 100 000 - 45 164 Unknown_Attribute ------ 100 100 000 - 10924 165 Unknown_Attribute ------ 100 100 000 - 81 166 Unknown_Attribute ------ 100 100 000 - 3 167 Unknown_Attribute ------ 100 100 000 - 22 169 Unknown_Attribute ------ 099 099 000 - 99 177 Wear_Leveling_Count ------ 100 100 050 - 1 181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 182 Erase_Fail_Count_Total ------ 100 100 000 - 0 192 Power-Off_Retract_Count ------ 100 100 000 - 56 194 Temperature_Celsius ------ 035 053 000 - 35 195 Hardware_ECC_Recovered ------ 100 100 000 - 0 196 Reallocated_Event_Count ------ 100 100 016 - 0 199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 231 Temperature_Celsius ------ 099 099 000 - 99 232 Available_Reservd_Space ------ 100 100 000 - 100 241 Total_LBAs_Written ------ 100 100 000 - 102875 242 Total_LBAs_Read ------ 100 100 000 - 223957 245 Unknown_Attribute ------ 100 100 000 - 393264 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 88 Current Device Internal Status Data log 0x25 GPL R/O 64 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xd1 GPL,SL VS 128 Device vendor specific log 0xd2 GPL,SL VS 8 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Read SMART Selective Self-test Log failed: scsi error badly formed scsi parameters Read SCT Status failed: scsi error badly formed scsi parameters SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 627 --- Lifetime Power-On Resets 0x01 0x010 4 685 --- Power-on Hours 0x01 0x018 6 2447088382 --- Logical Sectors Written 0x01 0x020 6 92494086 --- Number of Write Commands 0x01 0x028 6 1792407310 --- Logical Sectors Read 0x01 0x030 6 217919904 --- Number of Read Commands 0x01 0x038 6 2468147011 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 56 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 35 --- Current Temperature 0x05 0x010 1 37 --- Average Short Term Temperature 0x05 0x018 1 36 --- Average Long Term Temperature 0x05 0x020 1 53 --- Highest Temperature 0x05 0x028 1 23 --- Lowest Temperature 0x05 0x030 1 39 --- Highest Average Short Term Temperature 0x05 0x038 1 0 --- Lowest Average Short Term Temperature 0x05 0x040 1 39 --- Highest Average Long Term Temperature 0x05 0x048 1 0 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 1246 --- Number of Hardware Resets 0x06 0x010 4 683 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 1 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdd smartctl 7.1 2019-12-30 r5022 [i686-linux-5.4.83-generic-2rosa-i586] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.12 Device Model: ST3320418AS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: CC38 User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Nov 4 21:10:11 2021 ==> WARNING: A firmware update for this drive may be available, see the following Seagate web pages: http://knowledge.seagate.com/articles/en_US/FAQ/207931en http://knowledge.seagate.com/articles/en_US/FAQ/213891en SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 0 (vendor specific), recommended: 254 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 617) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 68) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 108 099 006 - 18255642 3 Spin_Up_Time PO---- 097 097 000 - 0 4 Start_Stop_Count -O--CK 084 084 020 - 16678 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 069 060 030 - 10056651 9 Power_On_Hours -O--CK 083 083 000 - 15484 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 093 093 020 - 7925 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 4295032833 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 069 059 045 - 31 (Min/Max 26/31) 194 Temperature_Celsius -O---K 031 041 000 - 31 (0 17 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 046 038 000 - 18255642 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 36463 (16 195 0) 241 Total_LBAs_Written ------ 100 253 000 - 179983790 242 Total_LBAs_Read ------ 100 253 000 - 3466050588 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 2928 Device vendor specific log 0xbd GPL VS 252 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 26/31 Celsius Lifetime Min/Max Temperature: 17/41 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (51) Index Estimated Time Temperature Celsius 52 2021-10-30 15:24 ? - 53 2021-10-30 16:23 36 ***************** 54 2021-10-30 17:22 ? - 55 2021-10-30 18:21 36 ***************** 56 2021-10-30 19:20 ? - 57 2021-10-30 20:19 36 ***************** 58 2021-10-30 21:18 ? - 59 2021-10-30 22:17 35 **************** 60 2021-10-30 23:16 35 **************** 61 2021-10-31 00:15 37 ****************** 62 2021-10-31 01:14 ? - 63 2021-10-31 02:13 34 *************** 64 2021-10-31 03:12 ? - 65 2021-10-31 04:11 34 *************** 66 2021-10-31 05:10 34 *************** 67 2021-10-31 06:09 37 ****************** 68 2021-10-31 07:08 ? - 69 2021-10-31 08:07 38 ******************* 70 2021-10-31 09:06 ? - 71 2021-10-31 10:05 25 ****** 72 2021-10-31 11:04 25 ****** 73 2021-10-31 12:03 37 ****************** 74 2021-10-31 13:02 ? - 75 2021-10-31 14:01 37 ****************** 76 2021-10-31 15:00 ? - 77 2021-10-31 15:59 33 ************** 78 2021-10-31 16:58 ? - 79 2021-10-31 17:57 24 ***** 80 2021-10-31 18:56 ? - 81 2021-10-31 19:55 25 ****** 82 2021-10-31 20:54 25 ****** 83 2021-10-31 21:53 37 ****************** 84 2021-10-31 22:52 38 ******************* 85 2021-10-31 23:51 38 ******************* 86 2021-11-01 00:50 39 ******************** 87 2021-11-01 01:49 38 ******************* 88 2021-11-01 02:48 38 ******************* 89 2021-11-01 03:47 38 ******************* 90 2021-11-01 04:46 ? - 91 2021-11-01 05:45 36 ***************** 92 2021-11-01 06:44 ? - 93 2021-11-01 07:43 25 ****** 94 2021-11-01 08:42 25 ****** 95 2021-11-01 09:41 ? - 96 2021-11-01 10:40 24 ***** 97 2021-11-01 11:39 ? - 98 2021-11-01 12:38 35 **************** 99 2021-11-01 13:37 35 **************** 100 2021-11-01 14:36 ? - 101 2021-11-01 15:35 23 **** 102 2021-11-01 16:34 23 **** 103 2021-11-01 17:33 36 ***************** 104 2021-11-01 18:32 34 *************** 105 2021-11-01 19:31 ? - 106 2021-11-01 20:30 23 **** 107 2021-11-01 21:29 ? - 108 2021-11-01 22:28 23 **** 109 2021-11-01 23:27 ? - 110 2021-11-02 00:26 29 ********** 111 2021-11-02 01:25 ? - 112 2021-11-02 02:24 27 ******** 113 2021-11-02 03:23 ? - 114 2021-11-02 04:22 23 **** 115 2021-11-02 05:21 23 **** 116 2021-11-02 06:20 ? - 117 2021-11-02 07:19 38 ******************* 118 2021-11-02 08:18 ? - 119 2021-11-02 09:17 24 ***** 120 2021-11-02 10:16 24 ***** 121 2021-11-02 11:15 32 ************* 122 2021-11-02 12:14 ? - 123 2021-11-02 13:13 31 ************ 124 2021-11-02 14:12 ? - 125 2021-11-02 15:11 24 ***** 126 2021-11-02 16:10 24 ***** 127 2021-11-02 17:09 35 **************** 0 2021-11-02 18:08 35 **************** 1 2021-11-02 19:07 ? - 2 2021-11-02 20:06 29 ********** 3 2021-11-02 21:05 ? - 4 2021-11-02 22:04 30 *********** 5 2021-11-02 23:03 ? - 6 2021-11-03 00:02 23 **** 7 2021-11-03 01:01 23 **** 8 2021-11-03 02:00 ? - 9 2021-11-03 02:59 27 ******** 10 2021-11-03 03:58 27 ******** 11 2021-11-03 04:57 35 **************** ... ..( 4 skipped). .. **************** 16 2021-11-03 09:52 35 **************** 17 2021-11-03 10:51 ? - 18 2021-11-03 11:50 22 *** 19 2021-11-03 12:49 ? - 20 2021-11-03 13:48 26 ******* 21 2021-11-03 14:47 26 ******* 22 2021-11-03 15:46 35 **************** 23 2021-11-03 16:45 36 ***************** 24 2021-11-03 17:44 36 ***************** 25 2021-11-03 18:43 36 ***************** 26 2021-11-03 19:42 ? - 27 2021-11-03 20:41 33 ************** 28 2021-11-03 21:40 ? - 29 2021-11-03 22:39 25 ****** 30 2021-11-03 23:38 25 ****** 31 2021-11-04 00:37 35 **************** 32 2021-11-04 01:36 35 **************** 33 2021-11-04 02:35 36 ***************** 34 2021-11-04 03:34 36 ***************** 35 2021-11-04 04:33 36 ***************** 36 2021-11-04 05:32 ? - 37 2021-11-04 06:31 36 ***************** 38 2021-11-04 07:30 ? - 39 2021-11-04 08:29 36 ***************** 40 2021-11-04 09:28 ? - 41 2021-11-04 10:27 24 ***** 42 2021-11-04 11:26 24 ***** 43 2021-11-04 12:25 36 ***************** 44 2021-11-04 13:24 36 ***************** 45 2021-11-04 14:23 36 ***************** 46 2021-11-04 15:22 ? - 47 2021-11-04 16:21 33 ************** 48 2021-11-04 17:20 33 ************** 49 2021-11-04 18:19 ? - 50 2021-11-04 19:18 26 ******* 51 2021-11-04 20:17 26 ******* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS