/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-22-amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SanDisk based SSDs Device Model: SanDisk SDSSDP064G Serial Number: -- LU WWN Device Id: 5 001b44 ... Firmware Version: 2.0.0 User Capacity: 64,023,257,088 bytes [64.0 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 1.8 inches TRIM Command: Available, deterministic Device is: In smartctl database 7.3/5319 ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Sep 5 11:39:35 2024 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 12) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct -O---- 100 100 000 - 0 9 Power_On_Hours -O---- 100 100 000 - 79256 12 Power_Cycle_Count -O---- 100 100 000 - 117 171 Program_Fail_Count -O---- 100 100 000 - 0 172 Erase_Fail_Count -O---- 100 100 000 - 0 173 Avg_Write/Erase_Count -O---- 100 100 000 - 3725 174 Unexpect_Power_Loss_Ct -O---- 100 100 000 - 73 187 Reported_Uncorrect -O---- 100 100 000 - 0 230 Perc_Write/Erase_Count -O---- 100 100 000 - 10000 232 Perc_Avail_Resrvd_Space PO---- 100 100 005 - 0 234 Perc_Write/Erase_Ct_BC -O---- 100 100 000 - 9554 241 Total_LBAs_Written -O---- 100 100 000 - 406726154 242 Total_LBAs_Read -O---- 100 100 000 - 412529921 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x03 GPL,SL R/O 16 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 GPL,SL R/O 1 SMART self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 1 Device vendor specific log 0xa2 GPL,SL VS 2 Device vendor specific log 0xa3 GPL,SL VS 1 Device vendor specific log Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. SMART Extended Comprehensive Error Log Version: 1 (16 sectors) No Errors Logged SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 26 --- Current Temperature 0x05 0x010 1 26 --- Average Short Term Temperature 0x05 0x018 1 - --- Average Long Term Temperature 0x05 0x020 1 50 --- Highest Temperature 0x05 0x028 1 17 --- Lowest Temperature 0x05 0x030 1 43 --- Highest Average Short Term Temperature 0x05 0x038 1 43 --- Lowest Average Short Term Temperature 0x05 0x040 1 38 --- Highest Average Long Term Temperature 0x05 0x048 1 38 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 95 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 124 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0001 2 0 Command failed due to ICRC error /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-22-amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red (SMR) Device Model: WDC WD20EFAX-68B2RN1 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 83.00A83 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5319 ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Sep 5 11:39:35 2024 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (14640) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 35) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3039) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 253 051 - 0 3 Spin_Up_Time POS--K 172 172 021 - 2366 4 Start_Stop_Count -O--CK 100 100 000 - 88 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 075 075 000 - 18907 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 87 192 Power-Off_Retract_Count -O--CK 200 200 000 - 56 193 Load_Cycle_Count -O--CK 200 200 000 - 1063 194 Temperature_Celsius -O---K 111 102 000 - 32 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x04 GPL R/O 256 Device Statistics log 0x04 SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x0c GPL R/O 2048 Pending Defects log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 294 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 74 Device vendor specific log 0xb9 GPL,SL VS 4 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 876 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 876 [11] occurred at disk power-on lifetime: 3039 hours (126 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: UNC at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 00 00 00 00 00 00 00 e0 08 01:49:55.121 READ DMA ea 00 00 00 08 00 00 00 62 b2 f0 a0 08 01:49:53.362 FLUSH CACHE EXT ca 00 00 00 08 00 00 00 00 00 10 e0 08 01:49:53.046 WRITE DMA ea 00 00 00 08 00 00 00 91 e7 e8 a0 08 01:49:53.045 FLUSH CACHE EXT ec 00 00 00 01 00 00 00 00 00 00 00 08 01:27:41.340 IDENTIFY DEVICE Error 875 [10] occurred at disk power-on lifetime: 922 hours (38 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 04 00 00 00 d2 bd d8 58 e0 00 Error: UNC 1024 sectors at LBA = 0xd2bdd858 = 3535657048 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 d2 bd d8 58 e0 08 5d+16:04:57.364 READ DMA EXT 25 00 00 04 00 00 00 d2 bd d4 58 e0 08 5d+16:04:57.018 READ DMA EXT 25 00 00 04 00 00 00 d2 bd d0 58 e0 08 5d+16:04:56.673 READ DMA EXT 25 00 00 04 00 00 00 d2 bd cc 58 e0 08 5d+16:04:56.326 READ DMA EXT 25 00 00 04 00 00 00 d2 bd c8 58 e0 08 5d+16:04:56.230 READ DMA EXT Error 874 [9] occurred at disk power-on lifetime: 922 hours (38 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 03 78 00 00 d2 bd 46 f8 e0 00 Error: UNC 888 sectors at LBA = 0xd2bd46f8 = 3535619832 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 03 78 00 00 d2 bd 46 f8 e0 08 5d+16:04:49.106 READ DMA EXT 25 00 00 04 00 00 00 d2 bd 42 f8 e0 08 5d+16:04:48.983 READ DMA EXT 25 00 00 04 00 00 00 d2 bd 3e f8 e0 08 5d+16:04:48.981 READ DMA EXT 25 00 00 04 00 00 00 d2 bd 3a f8 e0 08 5d+16:04:48.979 READ DMA EXT 25 00 00 00 10 00 00 d2 bd 3a e8 e0 08 5d+16:04:48.977 READ DMA EXT Error 873 [8] occurred at disk power-on lifetime: 922 hours (38 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 04 00 00 00 d2 a5 3a 58 e0 00 Error: UNC 1024 sectors at LBA = 0xd2a53a58 = 3534043736 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 d2 a5 3a 58 e0 08 5d+16:04:34.342 READ DMA EXT 25 00 00 00 08 00 00 d2 a5 3a 50 e0 08 5d+16:04:34.237 READ DMA EXT 25 00 00 03 f8 00 00 d2 a5 36 58 e0 08 5d+16:04:34.235 READ DMA EXT 25 00 00 00 08 00 00 d2 a5 36 50 e0 08 5d+16:04:34.231 READ DMA EXT 25 00 00 03 f8 00 00 d2 a5 32 58 e0 08 5d+16:04:34.229 READ DMA EXT Error 872 [7] occurred at disk power-on lifetime: 922 hours (38 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 02 f0 00 00 d2 80 77 c8 e0 00 Error: UNC 752 sectors at LBA = 0xd28077c8 = 3531634632 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 02 f0 00 00 d2 80 77 c8 e0 08 5d+16:04:15.659 READ DMA EXT 25 00 00 04 00 00 00 d2 80 73 c8 e0 08 5d+16:04:15.545 READ DMA EXT 25 00 00 04 00 00 00 d2 80 6f c8 e0 08 5d+16:04:15.535 READ DMA EXT 25 00 00 04 00 00 00 d2 80 6b c8 e0 08 5d+16:04:15.531 READ DMA EXT 25 00 00 04 00 00 00 d2 80 67 c8 e0 08 5d+16:04:15.526 READ DMA EXT Error 871 [6] occurred at disk power-on lifetime: 922 hours (38 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 04 00 00 00 d2 5e b3 d0 e0 00 Error: UNC 1024 sectors at LBA = 0xd25eb3d0 = 3529421776 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 d2 5e b3 d0 e0 08 5d+16:03:57.964 READ DMA EXT 25 00 00 04 00 00 00 d2 5e af d0 e0 08 5d+16:03:57.902 READ DMA EXT 25 00 00 04 00 00 00 d2 5e ab d0 e0 08 5d+16:03:57.900 READ DMA EXT 25 00 00 04 00 00 00 d2 5e a7 d0 e0 08 5d+16:03:57.883 READ DMA EXT 25 00 00 04 00 00 00 d2 5e a3 d0 e0 08 5d+16:03:57.881 READ DMA EXT Error 870 [5] occurred at disk power-on lifetime: 922 hours (38 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 04 00 00 00 d2 3f c3 78 e0 00 Error: UNC 1024 sectors at LBA = 0xd23fc378 = 3527394168 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 d2 3f c3 78 e0 08 5d+16:03:41.266 READ DMA EXT 25 00 00 02 18 00 00 d2 3f c1 60 e0 08 5d+16:03:41.150 READ DMA EXT 25 00 00 03 e0 00 00 d2 3f bd 80 e0 08 5d+16:03:41.146 READ DMA EXT 25 00 00 02 08 00 00 d2 3f bb 78 e0 08 5d+16:03:41.145 READ DMA EXT 25 00 00 02 10 00 00 d2 3f b9 68 e0 08 5d+16:03:41.144 READ DMA EXT Error 869 [4] occurred at disk power-on lifetime: 922 hours (38 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 02 c8 00 00 d2 23 c7 30 e0 00 Error: UNC 712 sectors at LBA = 0xd223c730 = 3525560112 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 02 c8 00 00 d2 23 c7 30 e0 08 5d+16:03:25.443 READ DMA EXT 25 00 00 04 00 00 00 d2 23 c3 30 e0 08 5d+16:03:25.337 READ DMA EXT 25 00 00 04 00 00 00 d2 23 bf 30 e0 08 5d+16:03:25.333 READ DMA EXT 25 00 00 03 d8 00 00 d2 23 bb 58 e0 08 5d+16:03:25.331 READ DMA EXT 25 00 00 00 30 00 00 d2 23 bb 28 e0 08 5d+16:03:25.330 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 385 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 31/39 Celsius Lifetime Min/Max Temperature: 15/41 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/65 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (157) Index Estimated Time Temperature Celsius 158 2024-09-05 03:42 32 ************* ... ..( 44 skipped). .. ************* 203 2024-09-05 04:27 32 ************* 204 2024-09-05 04:28 31 ************ 205 2024-09-05 04:29 32 ************* ... ..(102 skipped). .. ************* 308 2024-09-05 06:12 32 ************* 309 2024-09-05 06:13 31 ************ 310 2024-09-05 06:14 32 ************* 311 2024-09-05 06:15 32 ************* 312 2024-09-05 06:16 32 ************* 313 2024-09-05 06:17 31 ************ 314 2024-09-05 06:18 32 ************* 315 2024-09-05 06:19 32 ************* 316 2024-09-05 06:20 31 ************ 317 2024-09-05 06:21 31 ************ 318 2024-09-05 06:22 31 ************ 319 2024-09-05 06:23 32 ************* 320 2024-09-05 06:24 32 ************* 321 2024-09-05 06:25 31 ************ 322 2024-09-05 06:26 32 ************* ... ..( 5 skipped). .. ************* 328 2024-09-05 06:32 32 ************* 329 2024-09-05 06:33 31 ************ 330 2024-09-05 06:34 32 ************* 331 2024-09-05 06:35 32 ************* 332 2024-09-05 06:36 31 ************ 333 2024-09-05 06:37 32 ************* 334 2024-09-05 06:38 32 ************* 335 2024-09-05 06:39 32 ************* 336 2024-09-05 06:40 31 ************ 337 2024-09-05 06:41 32 ************* 338 2024-09-05 06:42 31 ************ 339 2024-09-05 06:43 32 ************* ... ..( 2 skipped). .. ************* 342 2024-09-05 06:46 32 ************* 343 2024-09-05 06:47 31 ************ 344 2024-09-05 06:48 32 ************* ... ..( 2 skipped). .. ************* 347 2024-09-05 06:51 32 ************* 348 2024-09-05 06:52 31 ************ ... ..( 2 skipped). .. ************ 351 2024-09-05 06:55 31 ************ 352 2024-09-05 06:56 32 ************* ... ..( 3 skipped). .. ************* 356 2024-09-05 07:00 32 ************* 357 2024-09-05 07:01 33 ************** 358 2024-09-05 07:02 33 ************** 359 2024-09-05 07:03 32 ************* ... ..( 63 skipped). .. ************* 423 2024-09-05 08:07 32 ************* 424 2024-09-05 08:08 31 ************ 425 2024-09-05 08:09 32 ************* ... ..( 7 skipped). .. ************* 433 2024-09-05 08:17 32 ************* 434 2024-09-05 08:18 31 ************ 435 2024-09-05 08:19 31 ************ 436 2024-09-05 08:20 32 ************* ... ..( 27 skipped). .. ************* 464 2024-09-05 08:48 32 ************* 465 2024-09-05 08:49 31 ************ 466 2024-09-05 08:50 31 ************ 467 2024-09-05 08:51 31 ************ 468 2024-09-05 08:52 32 ************* ... ..( 39 skipped). .. ************* 30 2024-09-05 09:32 32 ************* 31 2024-09-05 09:33 31 ************ 32 2024-09-05 09:34 32 ************* ... ..( 3 skipped). .. ************* 36 2024-09-05 09:38 32 ************* 37 2024-09-05 09:39 31 ************ 38 2024-09-05 09:40 32 ************* ... ..( 2 skipped). .. ************* 41 2024-09-05 09:43 32 ************* 42 2024-09-05 09:44 31 ************ 43 2024-09-05 09:45 31 ************ 44 2024-09-05 09:46 32 ************* 45 2024-09-05 09:47 31 ************ 46 2024-09-05 09:48 31 ************ 47 2024-09-05 09:49 31 ************ 48 2024-09-05 09:50 32 ************* 49 2024-09-05 09:51 31 ************ 50 2024-09-05 09:52 31 ************ 51 2024-09-05 09:53 32 ************* 52 2024-09-05 09:54 31 ************ 53 2024-09-05 09:55 31 ************ 54 2024-09-05 09:56 31 ************ 55 2024-09-05 09:57 32 ************* 56 2024-09-05 09:58 31 ************ ... ..( 16 skipped). .. ************ 73 2024-09-05 10:15 31 ************ 74 2024-09-05 10:16 32 ************* 75 2024-09-05 10:17 31 ************ 76 2024-09-05 10:18 31 ************ 77 2024-09-05 10:19 31 ************ 78 2024-09-05 10:20 32 ************* 79 2024-09-05 10:21 32 ************* 80 2024-09-05 10:22 32 ************* 81 2024-09-05 10:23 31 ************ 82 2024-09-05 10:24 31 ************ 83 2024-09-05 10:25 32 ************* 84 2024-09-05 10:26 31 ************ ... ..( 2 skipped). .. ************ 87 2024-09-05 10:29 31 ************ 88 2024-09-05 10:30 32 ************* ... ..( 19 skipped). .. ************* 108 2024-09-05 10:50 32 ************* 109 2024-09-05 10:51 31 ************ 110 2024-09-05 10:52 32 ************* ... ..( 5 skipped). .. ************* 116 2024-09-05 10:58 32 ************* 117 2024-09-05 10:59 31 ************ 118 2024-09-05 11:00 32 ************* ... ..( 7 skipped). .. ************* 126 2024-09-05 11:08 32 ************* 127 2024-09-05 11:09 31 ************ 128 2024-09-05 11:10 32 ************* ... ..( 28 skipped). .. ************* 157 2024-09-05 11:39 32 ************* SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 87 --- Lifetime Power-On Resets 0x01 0x010 4 18907 --- Power-on Hours 0x01 0x018 6 843271022 --- Logical Sectors Written 0x01 0x020 6 3524852 --- Number of Write Commands 0x01 0x028 6 24188664774 --- Logical Sectors Read 0x01 0x030 6 40710190 --- Number of Read Commands 0x01 0x038 6 3640690560 --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 18895 --- Spindle Motor Power-on Hours 0x03 0x010 4 2319 --- Head Flying Hours 0x03 0x018 4 1120 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x03 0x040 4 56 --- Number of High Priority Unload Events 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 899 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 31 --- Current Temperature 0x05 0x010 1 31 --- Average Short Term Temperature 0x05 0x018 1 34 --- Average Long Term Temperature 0x05 0x020 1 41 --- Highest Temperature 0x05 0x028 1 17 --- Lowest Temperature 0x05 0x030 1 37 --- Highest Average Short Term Temperature 0x05 0x038 1 17 --- Lowest Average Short Term Temperature 0x05 0x040 1 34 --- Highest Average Long Term Temperature 0x05 0x048 1 17 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 65 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 939 --- Number of Hardware Resets 0x06 0x010 4 360 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0xff ===== = = === == Vendor Specific Statistics (rev 1) == 0xff 0x008 7 0 --- Vendor Specific 0xff 0x010 7 0 --- Vendor Specific 0xff 0x018 7 0 --- Vendor Specific |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) No Defects Logged SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 174609 Vendor specific /dev/sdc smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-22-amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba 3.5" DT01ACA... Desktop HDD Device Model: TOSHIBA DT01ACA200 Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: MX4OABB0 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Sep 5 11:39:36 2024 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (15396) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 257) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 139 139 054 - 70 3 Spin_Up_Time POS--- 150 150 024 - 267 (Average 237) 4 Start_Stop_Count -O--C- 100 100 000 - 111 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 124 124 020 - 33 9 Power_On_Hours -O--C- 090 090 000 - 73449 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 111 192 Power-Off_Retract_Count -O--CK 100 100 000 - 779 193 Load_Cycle_Count -O--C- 100 100 000 - 779 194 Temperature_Celsius -O---- 171 171 000 - 35 (Min/Max 16/56) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 34/39 Celsius Lifetime Min/Max Temperature: 16/56 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (26) Index Estimated Time Temperature Celsius 27 2024-09-05 09:32 36 ***************** ... ..( 52 skipped). .. ***************** 80 2024-09-05 10:25 36 ***************** 81 2024-09-05 10:26 35 **************** 82 2024-09-05 10:27 35 **************** 83 2024-09-05 10:28 35 **************** 84 2024-09-05 10:29 36 ***************** ... ..( 25 skipped). .. ***************** 110 2024-09-05 10:55 36 ***************** 111 2024-09-05 10:56 35 **************** ... ..( 42 skipped). .. **************** 26 2024-09-05 11:39 35 **************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 111 --- Lifetime Power-On Resets 0x01 0x010 4 73449 --- Power-on Hours 0x01 0x018 6 344444792596 --- Logical Sectors Written 0x01 0x020 6 5241789990 --- Number of Write Commands 0x01 0x028 6 445847636989 --- Logical Sectors Read 0x01 0x030 6 3157671684 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 73437 --- Spindle Motor Power-on Hours 0x03 0x010 4 73437 --- Head Flying Hours 0x03 0x018 4 779 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 9 --- Read Recovery Attempts 0x03 0x030 4 6 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 35 --- Current Temperature 0x05 0x010 1 35 N-- Average Short Term Temperature 0x05 0x018 1 38 N-- Average Long Term Temperature 0x05 0x020 1 56 --- Highest Temperature 0x05 0x028 1 16 --- Lowest Temperature 0x05 0x030 1 51 N-- Highest Average Short Term Temperature 0x05 0x038 1 22 N-- Lowest Average Short Term Temperature 0x05 0x040 1 45 N-- Highest Average Long Term Temperature 0x05 0x048 1 22 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 52013 --- Number of Hardware Resets 0x06 0x010 4 50566 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdd smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-22-amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red (SMR) Device Model: WDC WD20EFAX-68B2RN1 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 83.00A83 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5319 ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Sep 5 11:39:38 2024 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (15360) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 35) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3039) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 253 051 - 0 3 Spin_Up_Time POS--K 183 177 021 - 1808 4 Start_Stop_Count -O--CK 029 029 000 - 71752 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 075 075 000 - 18317 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 029 029 000 - 71751 192 Power-Off_Retract_Count -O--CK 105 105 000 - 71717 193 Load_Cycle_Count -O--CK 200 200 000 - 1174 194 Temperature_Celsius -O---K 110 101 000 - 33 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x04 GPL R/O 256 Device Statistics log 0x04 SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x0c GPL R/O 2048 Pending Defects log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 294 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 74 Device vendor specific log 0xb9 GPL,SL VS 4 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 963 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 963 [2] occurred at disk power-on lifetime: 10847 hours (451 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 e8 e0 88 00 e0 00 Error: UNC 8 sectors at LBA = 0xe8e08800 = 3907028992 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 e8 e0 88 00 e0 08 00:00:39.968 READ DMA EXT c8 00 00 00 08 00 00 00 04 08 00 e0 08 00:00:38.225 READ DMA 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:38.220 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:38.218 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:00:38.218 SET FEATURES [Set transfer mode] Error 962 [1] occurred at disk power-on lifetime: 10847 hours (451 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 00 04 08 00 e0 00 Error: UNC 8 sectors at LBA = 0x00040800 = 264192 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 00 04 08 00 e0 08 00:00:31.248 READ DMA c8 00 00 00 08 00 00 00 04 08 00 e0 08 00:00:30.534 READ DMA c8 00 00 00 08 00 00 00 00 00 08 e0 08 00:00:30.531 READ DMA c8 00 00 00 08 00 00 00 00 00 00 e0 08 00:00:30.531 READ DMA 25 00 00 00 08 00 00 e8 e0 88 a0 e0 08 00:00:30.530 READ DMA EXT Error 961 [0] occurred at disk power-on lifetime: 4577 hours (190 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 04 00 00 00 a2 da 93 e0 e0 00 Error: UNC 1024 sectors at LBA = 0xa2da93e0 = 2732233696 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 a2 da 93 e0 e0 08 01:08:43.059 READ DMA EXT 25 00 00 04 00 00 00 a2 da 8f e0 e0 08 01:08:42.969 READ DMA EXT 25 00 00 04 00 00 00 a2 da 8b e0 e0 08 01:08:42.964 READ DMA EXT 25 00 00 04 00 00 00 a2 da 87 e0 e0 08 01:08:42.956 READ DMA EXT 25 00 00 04 00 00 00 a2 da 83 e0 e0 08 01:08:42.951 READ DMA EXT Error 960 [23] occurred at disk power-on lifetime: 4577 hours (190 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 04 00 00 00 a2 b2 de e0 e0 00 Error: UNC 1024 sectors at LBA = 0xa2b2dee0 = 2729631456 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 a2 b2 de e0 e0 08 01:08:20.167 READ DMA EXT 25 00 00 04 00 00 00 a2 b2 da e0 e0 08 01:08:20.079 READ DMA EXT 25 00 00 04 00 00 00 a2 b2 d6 e0 e0 08 01:08:20.073 READ DMA EXT 25 00 00 04 00 00 00 a2 b2 d2 e0 e0 08 01:08:20.068 READ DMA EXT 25 00 00 04 00 00 00 a2 b2 ce e0 e0 08 01:08:20.063 READ DMA EXT Error 959 [22] occurred at disk power-on lifetime: 4577 hours (190 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 04 00 00 00 a2 83 69 50 e0 00 Error: UNC 1024 sectors at LBA = 0xa2836950 = 2726521168 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 a2 83 69 50 e0 08 01:07:54.016 READ DMA EXT 25 00 00 04 00 00 00 a2 83 65 50 e0 08 01:07:53.926 READ DMA EXT 25 00 00 04 00 00 00 a2 83 61 50 e0 08 01:07:53.921 READ DMA EXT 25 00 00 04 00 00 00 a2 83 5d 50 e0 08 01:07:53.916 READ DMA EXT 25 00 00 00 08 00 00 a2 83 5d 48 e0 08 01:07:53.915 READ DMA EXT Error 958 [21] occurred at disk power-on lifetime: 4577 hours (190 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 04 00 00 00 a2 57 1f a0 e0 00 Error: UNC 1024 sectors at LBA = 0xa2571fa0 = 2723618720 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 a2 57 1f a0 e0 08 01:07:29.264 READ DMA EXT 25 00 00 04 00 00 00 a2 57 1b a0 e0 08 01:07:29.191 READ DMA EXT 25 00 00 04 00 00 00 a2 57 17 a0 e0 08 01:07:29.187 READ DMA EXT 25 00 00 04 00 00 00 a2 57 13 a0 e0 08 01:07:29.181 READ DMA EXT 25 00 00 04 00 00 00 a2 57 0f a0 e0 08 01:07:29.176 READ DMA EXT Error 957 [20] occurred at disk power-on lifetime: 4577 hours (190 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 03 28 00 00 a2 2a 99 40 e0 00 Error: UNC 808 sectors at LBA = 0xa22a9940 = 2720700736 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 03 28 00 00 a2 2a 99 40 e0 08 01:07:04.497 READ DMA EXT 25 00 00 04 00 00 00 a2 2a 95 40 e0 08 01:07:04.411 READ DMA EXT 25 00 00 04 00 00 00 a2 2a 91 40 e0 08 01:07:04.406 READ DMA EXT 25 00 00 04 00 00 00 a2 2a 8d 40 e0 08 01:07:04.401 READ DMA EXT 25 00 00 04 00 00 00 a2 2a 89 40 e0 08 01:07:04.395 READ DMA EXT Error 956 [19] occurred at disk power-on lifetime: 4577 hours (190 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 04 00 00 00 a1 ff db c0 e0 00 Error: UNC 1024 sectors at LBA = 0xa1ffdbc0 = 2717899712 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 a1 ff db c0 e0 08 01:06:40.487 READ DMA EXT 25 00 00 04 00 00 00 a1 ff d7 c0 e0 08 01:06:40.398 READ DMA EXT 25 00 00 04 00 00 00 a1 ff d3 c0 e0 08 01:06:40.393 READ DMA EXT 25 00 00 04 00 00 00 a1 ff cf c0 e0 08 01:06:40.388 READ DMA EXT 25 00 00 04 00 00 00 a1 ff cb c0 e0 08 01:06:40.383 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 383 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 33/40 Celsius Lifetime Min/Max Temperature: 16/43 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/65 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (444) Index Estimated Time Temperature Celsius 445 2024-09-05 03:42 33 ************** ... ..(357 skipped). .. ************** 325 2024-09-05 09:40 33 ************** 326 2024-09-05 09:41 34 *************** ... ..( 8 skipped). .. *************** 335 2024-09-05 09:50 34 *************** 336 2024-09-05 09:51 35 **************** 337 2024-09-05 09:52 34 *************** ... ..( 10 skipped). .. *************** 348 2024-09-05 10:03 34 *************** 349 2024-09-05 10:04 33 ************** ... ..( 94 skipped). .. ************** 444 2024-09-05 11:39 33 ************** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 71751 --- Lifetime Power-On Resets 0x01 0x010 4 18317 --- Power-on Hours 0x01 0x018 6 842978286 --- Logical Sectors Written 0x01 0x020 6 3491939 --- Number of Write Commands 0x01 0x028 6 21840426917 --- Logical Sectors Read 0x01 0x030 6 36104502 --- Number of Read Commands 0x01 0x038 6 1516690560 --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 18298 --- Spindle Motor Power-on Hours 0x03 0x010 4 2100 --- Head Flying Hours 0x03 0x018 4 72892 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 6 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x03 0x040 4 71717 --- Number of High Priority Unload Events 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 965 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 3 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 33 --- Current Temperature 0x05 0x010 1 33 --- Average Short Term Temperature 0x05 0x018 1 34 --- Average Long Term Temperature 0x05 0x020 1 42 --- Highest Temperature 0x05 0x028 1 17 --- Lowest Temperature 0x05 0x030 1 39 --- Highest Average Short Term Temperature 0x05 0x038 1 17 --- Lowest Average Short Term Temperature 0x05 0x040 1 34 --- Highest Average Long Term Temperature 0x05 0x048 1 18 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 65 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 72572 --- Number of Hardware Resets 0x06 0x010 4 272 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0xff ===== = = === == Vendor Specific Statistics (rev 1) == 0xff 0x008 7 0 --- Vendor Specific 0xff 0x010 7 0 --- Vendor Specific 0xff 0x018 7 0 --- Vendor Specific |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) No Defects Logged SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 174527 Vendor specific /dev/sde smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-22-amd64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red (SMR) Device Model: WDC WD20EFAX-68B2RN1 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 83.00A83 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5319 ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Sep 5 11:39:39 2024 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (27944) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 243) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3039) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 173 172 021 - 2308 4 Start_Stop_Count -O--CK 100 100 000 - 89 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 070 070 000 - 22601 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 88 192 Power-Off_Retract_Count -O--CK 200 200 000 - 51 193 Load_Cycle_Count -O--CK 196 196 000 - 14764 194 Temperature_Celsius -O---K 110 100 000 - 33 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x04 GPL R/O 256 Device Statistics log 0x04 SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x0c GPL R/O 2048 Pending Defects log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 294 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 74 Device vendor specific log 0xb9 GPL,SL VS 4 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 55710 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 55710 [5] occurred at disk power-on lifetime: 5189 hours (216 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 c0 00 00 66 bd 0b 20 e0 00 Error: UNC 448 sectors at LBA = 0x66bd0b20 = 1723665184 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 c0 00 00 66 bd 0b 20 e0 08 34d+06:18:02.600 READ DMA EXT 25 00 00 04 00 00 00 66 bd 07 20 e0 08 34d+06:18:02.500 READ DMA EXT 25 00 00 04 00 00 00 66 bd 03 20 e0 08 34d+06:18:02.495 READ DMA EXT 25 00 00 04 00 00 00 66 bc ff 20 e0 08 34d+06:18:02.489 READ DMA EXT 25 00 00 04 00 00 00 66 bc fb 20 e0 08 34d+06:18:02.484 READ DMA EXT Error 55709 [4] occurred at disk power-on lifetime: 5189 hours (216 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 04 00 00 00 66 a7 af 48 e0 00 Error: UNC 1024 sectors at LBA = 0x66a7af48 = 1722265416 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 66 a7 af 48 e0 08 34d+06:17:46.801 READ DMA EXT 25 00 00 04 00 00 00 66 a7 ab 48 e0 08 34d+06:17:46.705 READ DMA EXT 25 00 00 04 00 00 00 66 a7 a7 48 e0 08 34d+06:17:46.700 READ DMA EXT 25 00 00 04 00 00 00 66 a7 a3 48 e0 08 34d+06:17:46.695 READ DMA EXT 25 00 00 04 00 00 00 66 a7 9f 48 e0 08 34d+06:17:46.689 READ DMA EXT Error 55708 [3] occurred at disk power-on lifetime: 5189 hours (216 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 04 00 00 00 66 90 ae 18 e0 00 Error: UNC 1024 sectors at LBA = 0x6690ae18 = 1720757784 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 66 90 ae 18 e0 08 34d+06:17:30.351 READ DMA EXT 25 00 00 04 00 00 00 66 90 aa 18 e0 08 34d+06:17:30.250 READ DMA EXT 25 00 00 04 00 00 00 66 90 a6 18 e0 08 34d+06:17:30.245 READ DMA EXT 25 00 00 04 00 00 00 66 90 a2 18 e0 08 34d+06:17:30.240 READ DMA EXT 25 00 00 04 00 00 00 66 90 9e 18 e0 08 34d+06:17:30.235 READ DMA EXT Error 55707 [2] occurred at disk power-on lifetime: 5189 hours (216 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 04 00 00 00 66 79 b3 70 e0 00 Error: UNC 1024 sectors at LBA = 0x6679b370 = 1719251824 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 66 79 b3 70 e0 08 34d+06:17:13.985 READ DMA EXT 25 00 00 04 00 00 00 66 79 af 70 e0 08 34d+06:17:13.884 READ DMA EXT 25 00 00 04 00 00 00 66 79 ab 70 e0 08 34d+06:17:13.879 READ DMA EXT 25 00 00 04 00 00 00 66 79 a7 70 e0 08 34d+06:17:13.874 READ DMA EXT 25 00 00 04 00 00 00 66 79 a3 70 e0 08 34d+06:17:13.869 READ DMA EXT Error 55706 [1] occurred at disk power-on lifetime: 5189 hours (216 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 04 00 00 00 66 61 0f 28 e0 00 Error: UNC 1024 sectors at LBA = 0x66610f28 = 1717636904 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 66 61 0f 28 e0 08 34d+06:16:56.931 READ DMA EXT 25 00 00 00 08 00 00 66 61 0f 20 e0 08 34d+06:16:56.836 READ DMA EXT 25 00 00 04 00 00 00 66 61 0b 20 e0 08 34d+06:16:56.834 READ DMA EXT 25 00 00 04 00 00 00 66 61 07 20 e0 08 34d+06:16:56.829 READ DMA EXT 25 00 00 04 00 00 00 66 61 03 20 e0 08 34d+06:16:56.824 READ DMA EXT Error 55705 [0] occurred at disk power-on lifetime: 5189 hours (216 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 04 00 00 00 66 46 c6 d8 e0 00 Error: UNC 1024 sectors at LBA = 0x6646c6d8 = 1715914456 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 66 46 c6 d8 e0 08 34d+06:16:39.207 READ DMA EXT 25 00 00 04 00 00 00 66 46 c2 d8 e0 08 34d+06:16:39.106 READ DMA EXT 25 00 00 04 00 00 00 66 46 be d8 e0 08 34d+06:16:39.101 READ DMA EXT 25 00 00 04 00 00 00 66 46 ba d8 e0 08 34d+06:16:39.096 READ DMA EXT 25 00 00 04 00 00 00 66 46 b6 d8 e0 08 34d+06:16:39.091 READ DMA EXT Error 55704 [23] occurred at disk power-on lifetime: 5189 hours (216 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 04 00 00 00 66 2f cd c8 e0 00 Error: UNC 1024 sectors at LBA = 0x662fcdc8 = 1714408904 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 66 2f cd c8 e0 08 34d+06:16:22.746 READ DMA EXT 25 00 00 04 00 00 00 66 2f c9 c8 e0 08 34d+06:16:22.647 READ DMA EXT 25 00 00 04 00 00 00 66 2f c5 c8 e0 08 34d+06:16:22.641 READ DMA EXT 25 00 00 04 00 00 00 66 2f c1 c8 e0 08 34d+06:16:22.636 READ DMA EXT 25 00 00 04 00 00 00 66 2f bd c8 e0 08 34d+06:16:22.631 READ DMA EXT Error 55703 [22] occurred at disk power-on lifetime: 5189 hours (216 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 04 00 00 00 66 15 88 10 e0 00 Error: UNC 1024 sectors at LBA = 0x66158810 = 1712687120 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 04 00 00 00 66 15 88 10 e0 08 34d+06:16:05.113 READ DMA EXT 25 00 00 04 00 00 00 66 15 84 10 e0 08 34d+06:16:05.012 READ DMA EXT 25 00 00 04 00 00 00 66 15 80 10 e0 08 34d+06:16:05.007 READ DMA EXT 25 00 00 04 00 00 00 66 15 7c 10 e0 08 34d+06:16:05.002 READ DMA EXT 25 00 00 04 00 00 00 66 15 78 10 e0 08 34d+06:16:04.997 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 33/41 Celsius Lifetime Min/Max Temperature: 16/43 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/65 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (248) Index Estimated Time Temperature Celsius 249 2024-09-05 03:42 33 ************** ... ..(476 skipped). .. ************** 248 2024-09-05 11:39 33 ************** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 88 --- Lifetime Power-On Resets 0x01 0x010 4 22601 --- Power-on Hours 0x01 0x018 6 39536140496 --- Logical Sectors Written 0x01 0x020 6 27004327 --- Number of Write Commands 0x01 0x028 6 59966228318 --- Logical Sectors Read 0x01 0x030 6 191701745 --- Number of Read Commands 0x01 0x038 6 4054188672 --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 22580 --- Spindle Motor Power-on Hours 0x03 0x010 4 5376 --- Head Flying Hours 0x03 0x018 4 14816 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x03 0x040 4 51 --- Number of High Priority Unload Events 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 63042 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 33 --- Current Temperature 0x05 0x010 1 33 --- Average Short Term Temperature 0x05 0x018 1 35 --- Average Long Term Temperature 0x05 0x020 1 43 --- Highest Temperature 0x05 0x028 1 16 --- Lowest Temperature 0x05 0x030 1 39 --- Highest Average Short Term Temperature 0x05 0x038 1 17 --- Lowest Average Short Term Temperature 0x05 0x040 1 35 --- Highest Average Long Term Temperature 0x05 0x048 1 17 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 65 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 65213 --- Number of Hardware Resets 0x06 0x010 4 66152 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0xff ===== = = === == Vendor Specific Statistics (rev 1) == 0xff 0x008 7 0 --- Vendor Specific 0xff 0x010 7 0 --- Vendor Specific 0xff 0x018 7 0 --- Vendor Specific |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) No Defects Logged SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 174613 Vendor specific