Probe #8caf6e2b66 of Gigabyte Z87X-D3H-CF Desktop Computer (Z87X-D3H)

Log: smartctl

/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.17.4-1-default] (SUSE RPM) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 850 EVO 250GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EMT01B6Q User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available Device is: In smartctl database 7.3/5319 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon May 9 22:03:24 2022 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 133) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 096 096 000 - 18420 12 Power_Cycle_Count -O--CK 099 099 000 - 786 177 Wear_Leveling_Count PO--C- 094 094 000 - 110 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 065 039 000 - 35 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 241 241 Total_LBAs_Written -O--CK 099 099 000 - 48648479188 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 18407 - # 2 Short offline Completed without error 00% 18378 - # 3 Short offline Completed without error 00% 18355 - # 4 Short offline Completed without error 00% 18331 - # 5 Short offline Completed without error 00% 18295 - # 6 Extended offline Completed without error 00% 18273 - # 7 Short offline Completed without error 00% 18252 - # 8 Short offline Completed without error 00% 18229 - # 9 Short offline Completed without error 00% 18162 - #10 Short offline Completed without error 00% 18103 - #11 Short offline Completed without error 00% 18082 - #12 Short offline Completed without error 00% 17809 - #13 Short offline Completed without error 00% 17676 - #14 Extended offline Completed without error 00% 17160 - #15 Short offline Completed without error 00% 17148 - Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SCT command executing in background (5) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 31/45 Celsius Lifetime Min/Max Temperature: 0/70 Celsius Under/Over Temperature Limit Count: 4294967295/4294901760 SMART Status: 0xffff (Reserved) SCT Temperature History Version: 3 (Unknown, should be 2) Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (81) Index Estimated Time Temperature Celsius 82 2022-05-09 00:50 ? - ... ..( 44 skipped). .. - 127 2022-05-09 08:20 ? - 0 2022-05-09 08:30 40 ********************* 1 2022-05-09 08:40 32 ************* 2 2022-05-09 08:50 36 ***************** 3 2022-05-09 09:00 37 ****************** 4 2022-05-09 09:10 39 ******************** 5 2022-05-09 09:20 41 ********************** 6 2022-05-09 09:30 42 *********************** 7 2022-05-09 09:40 43 ************************ ... ..( 4 skipped). .. ************************ 12 2022-05-09 10:30 43 ************************ 13 2022-05-09 10:40 38 ******************* 14 2022-05-09 10:50 35 **************** 15 2022-05-09 11:00 34 *************** 16 2022-05-09 11:10 32 ************* 17 2022-05-09 11:20 34 *************** 18 2022-05-09 11:30 39 ******************** 19 2022-05-09 11:40 39 ******************** 20 2022-05-09 11:50 35 **************** 21 2022-05-09 12:00 33 ************** 22 2022-05-09 12:10 32 ************* 23 2022-05-09 12:20 32 ************* 24 2022-05-09 12:30 31 ************ 25 2022-05-09 12:40 31 ************ 26 2022-05-09 12:50 32 ************* 27 2022-05-09 13:00 32 ************* 28 2022-05-09 13:10 36 ***************** 29 2022-05-09 13:20 36 ***************** 30 2022-05-09 13:30 38 ******************* 31 2022-05-09 13:40 37 ****************** 32 2022-05-09 13:50 34 *************** 33 2022-05-09 14:00 35 **************** 34 2022-05-09 14:10 34 *************** 35 2022-05-09 14:20 33 ************** 36 2022-05-09 14:30 35 **************** 37 2022-05-09 14:40 36 ***************** 38 2022-05-09 14:50 40 ********************* 39 2022-05-09 15:00 41 ********************** 40 2022-05-09 15:10 42 *********************** 41 2022-05-09 15:20 42 *********************** 42 2022-05-09 15:30 43 ************************ ... ..( 2 skipped). .. ************************ 45 2022-05-09 16:00 43 ************************ 46 2022-05-09 16:10 44 ************************* 47 2022-05-09 16:20 43 ************************ 48 2022-05-09 16:30 43 ************************ 49 2022-05-09 16:40 44 ************************* 50 2022-05-09 16:50 43 ************************ ... ..( 2 skipped). .. ************************ 53 2022-05-09 17:20 43 ************************ 54 2022-05-09 17:30 44 ************************* 55 2022-05-09 17:40 43 ************************ 56 2022-05-09 17:50 43 ************************ 57 2022-05-09 18:00 44 ************************* ... ..( 3 skipped). .. ************************* 61 2022-05-09 18:40 44 ************************* 62 2022-05-09 18:50 45 ************************** 63 2022-05-09 19:00 44 ************************* 64 2022-05-09 19:10 44 ************************* 65 2022-05-09 19:20 44 ************************* 66 2022-05-09 19:30 43 ************************ 67 2022-05-09 19:40 42 *********************** 68 2022-05-09 19:50 42 *********************** 69 2022-05-09 20:00 44 ************************* 70 2022-05-09 20:10 44 ************************* 71 2022-05-09 20:20 43 ************************ 72 2022-05-09 20:30 43 ************************ 73 2022-05-09 20:40 39 ******************** 74 2022-05-09 20:50 36 ***************** 75 2022-05-09 21:00 37 ****************** 76 2022-05-09 21:10 37 ****************** 77 2022-05-09 21:20 36 ***************** 78 2022-05-09 21:30 35 **************** 79 2022-05-09 21:40 35 **************** 80 2022-05-09 21:50 34 *************** 81 2022-05-09 22:00 35 **************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.17.4-1-default] (SUSE RPM) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Black Device Model: WDC WD1003FZEX-00MK2A0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database 7.3/5319 ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon May 9 22:03:24 2022 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (11400) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 118) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 80 3 Spin_Up_Time POS--K 173 167 021 - 2308 4 Start_Stop_Count -O--CK 096 096 000 - 4454 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 031 031 000 - 50980 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 096 096 000 - 4063 192 Power-Off_Retract_Count -O--CK 200 200 000 - 574 193 Load_Cycle_Count -O--CK 199 199 000 - 4832 194 Temperature_Celsius -O---K 106 088 000 - 37 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 50967 - # 2 Short offline Completed without error 00% 50962 - # 3 Short offline Completed without error 00% 50955 - # 4 Short offline Completed without error 00% 50940 - # 5 Short offline Completed without error 00% 50938 - # 6 Short offline Completed without error 00% 50914 - # 7 Short offline Completed without error 00% 50890 - # 8 Short offline Completed without error 00% 50876 - # 9 Short offline Completed without error 00% 50855 - #10 Short offline Completed without error 00% 50834 - #11 Extended offline Interrupted (host reset) 50% 50833 - #12 Short offline Completed without error 00% 50812 - #13 Short offline Completed without error 00% 50789 - #14 Short offline Completed without error 00% 50757 - #15 Short offline Completed without error 00% 50733 - #16 Short offline Completed without error 00% 50721 - #17 Short offline Completed without error 00% 50701 - #18 Short offline Completed without error 00% 50690 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 22/45 Celsius Lifetime Min/Max Temperature: 0/55 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (92) Index Estimated Time Temperature Celsius 93 2022-05-09 14:06 43 ************************ ... ..( 4 skipped). .. ************************ 98 2022-05-09 14:11 43 ************************ 99 2022-05-09 14:12 44 ************************* ... ..(183 skipped). .. ************************* 283 2022-05-09 17:16 44 ************************* 284 2022-05-09 17:17 45 ************************** ... ..( 48 skipped). .. ************************** 333 2022-05-09 18:06 45 ************************** 334 2022-05-09 18:07 44 ************************* ... ..( 7 skipped). .. ************************* 342 2022-05-09 18:15 44 ************************* 343 2022-05-09 18:16 43 ************************ ... ..( 13 skipped). .. ************************ 357 2022-05-09 18:30 43 ************************ 358 2022-05-09 18:31 44 ************************* ... ..( 37 skipped). .. ************************* 396 2022-05-09 19:09 44 ************************* 397 2022-05-09 19:10 43 ************************ 398 2022-05-09 19:11 43 ************************ 399 2022-05-09 19:12 42 *********************** ... ..( 2 skipped). .. *********************** 402 2022-05-09 19:15 42 *********************** 403 2022-05-09 19:16 41 ********************** 404 2022-05-09 19:17 41 ********************** 405 2022-05-09 19:18 41 ********************** 406 2022-05-09 19:19 40 ********************* ... ..( 7 skipped). .. ********************* 414 2022-05-09 19:27 40 ********************* 415 2022-05-09 19:28 39 ******************** ... ..( 5 skipped). .. ******************** 421 2022-05-09 19:34 39 ******************** 422 2022-05-09 19:35 38 ******************* ... ..( 14 skipped). .. ******************* 437 2022-05-09 19:50 38 ******************* 438 2022-05-09 19:51 37 ****************** ... ..( 41 skipped). .. ****************** 2 2022-05-09 20:33 37 ****************** 3 2022-05-09 20:34 36 ***************** ... ..( 35 skipped). .. ***************** 39 2022-05-09 21:10 36 ***************** 40 2022-05-09 21:11 37 ****************** 41 2022-05-09 21:12 37 ****************** 42 2022-05-09 21:13 37 ****************** 43 2022-05-09 21:14 38 ******************* 44 2022-05-09 21:15 38 ******************* 45 2022-05-09 21:16 38 ******************* 46 2022-05-09 21:17 39 ******************** ... ..( 4 skipped). .. ******************** 51 2022-05-09 21:22 39 ******************** 52 2022-05-09 21:23 40 ********************* 53 2022-05-09 21:24 40 ********************* 54 2022-05-09 21:25 41 ********************** ... ..( 4 skipped). .. ********************** 59 2022-05-09 21:30 41 ********************** 60 2022-05-09 21:31 42 *********************** ... ..( 6 skipped). .. *********************** 67 2022-05-09 21:38 42 *********************** 68 2022-05-09 21:39 43 ************************ ... ..( 23 skipped). .. ************************ 92 2022-05-09 22:03 43 ************************ SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 48669 Vendor specific


Hardware for Linux and BSD

GitHub