/dev/nvme0n1 smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.4.0-208-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: WD Green SN350 500GB 2G0C Serial Number: -- Firmware Version: 236050WD PCI Vendor/Subsystem ID: 0x15b7 IEEE OUI Identifier: 0x001b44 Total NVM Capacity: 500,107,862,016 [500 GB] Unallocated NVM Capacity: 0 Controller ID: 0 Number of Namespaces: 1 Namespace 1 Size/Capacity: 500,107,862,016 [500 GB] Namespace 1 Formatted LBA Size: 512 Local Time is: Fri Mar 7 13:36:23 2025 -03 Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL *Other* Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat *Other* Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 80 Celsius Critical Comp. Temp. Threshold: 85 Celsius Namespace 1 Features (0x02): NA_Fields Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 3.50W 2.40W - 0 0 0 0 0 0 1 + 2.70W 2.10W - 0 0 0 0 0 0 2 + 1.90W 1.80W - 0 0 0 0 0 0 3 - 0.0250W - - 3 3 3 3 3900 11000 4 - 0.0050W - - 4 4 4 4 4249 45750 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 1 - 4096 0 1 === START OF SMART DATA SECTION === Read NVMe SMART/Health Information failed: NVMe Status 0x4002 /dev/sda smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.4.0-208-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba 2.5" HDD MQ01ABD... Device Model: TOSHIBA MQ01ABD100 Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: AX001U User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Mar 7 13:36:23 2025 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 237) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 2 Throughput_Performance P-S--- 100 100 050 - 0 3 Spin_Up_Time POS--K 100 100 001 - 2637 4 Start_Stop_Count -O--CK 100 100 000 - 49452 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 8 Seek_Time_Performance P-S--- 100 100 050 - 0 9 Power_On_Hours -O--CK 001 001 000 - 68857 10 Spin_Retry_Count PO--CK 253 100 030 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 34164 191 G-Sense_Error_Rate -O--CK 100 100 000 - 15 192 Power-Off_Retract_Count -O--CK 053 053 000 - 23735 193 Load_Cycle_Count -O--CK 001 001 000 - 1185696 194 Temperature_Celsius -O---K 100 100 000 - 34 (Min/Max 17/50) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 11 220 Disk_Shift -O---- 100 100 000 - 0 222 Loaded_Hours -O--CK 001 001 000 - 48024 223 Load_Retry_Count -O--CK 100 100 000 - 0 224 Load_Friction -O---K 100 100 000 - 0 226 Load-in_Time -OS--K 100 100 000 - 259 240 Head_Flying_Hours P----- 100 100 001 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) Device Error Count: 4903 (device log contains only the most recent 256 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4903 [38] occurred at disk power-on lifetime: 3182 hours (132 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 10 08 00 00 00 00 08 f0 e0 00 Error: UNC 4104 sectors at LBA = 0x000008f0 = 2288 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 00 00 08 f0 e0 00 01:54:23.447 READ DMA 27 00 00 00 00 00 00 00 00 00 00 e0 00 01:54:23.406 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 00 01:54:23.403 IDENTIFY DEVICE ef 00 03 00 45 00 00 00 00 00 00 a0 00 01:54:23.401 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 00 01:54:23.376 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 4902 [37] occurred at disk power-on lifetime: 3182 hours (132 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 10 08 00 00 00 00 08 f0 e0 00 Error: UNC 4104 sectors at LBA = 0x000008f0 = 2288 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 00 00 08 f0 e0 00 01:54:19.546 READ DMA c8 00 00 00 08 00 00 00 00 08 e8 e0 00 01:54:19.546 READ DMA c8 00 00 00 08 00 00 00 00 08 e0 e0 00 01:54:19.545 READ DMA c8 00 00 00 08 00 00 00 00 08 d8 e0 00 01:54:19.544 READ DMA c8 00 00 00 08 00 00 00 00 08 d0 e0 00 01:54:19.544 READ DMA Error 4901 [36] occurred at disk power-on lifetime: 3182 hours (132 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 10 00 00 00 00 08 f0 e0 00 Error: UNC 272 sectors at LBA = 0x000008f0 = 2288 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 80 00 00 00 00 08 80 e0 00 01:54:15.682 READ DMA EXT c8 00 00 00 38 00 00 00 00 08 40 e0 00 01:54:15.681 READ DMA c8 00 00 00 18 00 00 00 00 08 20 e0 00 01:54:15.681 READ DMA c8 00 00 00 08 00 00 00 00 08 10 e0 00 01:54:15.681 READ DMA c8 00 00 00 08 00 00 00 00 08 78 e0 00 01:54:15.680 READ DMA Error 4900 [35] occurred at disk power-on lifetime: 3182 hours (132 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 00 00 08 f0 e0 00 Error: UNC 8 sectors at LBA = 0x000008f0 = 2288 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 18 00 00 00 00 08 e0 e0 00 01:53:49.978 READ DMA c8 00 00 00 18 00 00 00 00 08 c0 e0 00 01:53:49.978 READ DMA c8 00 00 00 08 00 00 00 00 08 50 e0 00 01:53:49.969 READ DMA c8 00 00 00 08 00 00 00 00 08 40 e0 00 01:53:49.939 READ DMA b0 00 da 00 00 00 00 00 c2 4f 00 00 00 01:53:47.304 SMART RETURN STATUS Error 4899 [34] occurred at disk power-on lifetime: 3178 hours (132 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 ff 08 00 00 00 00 08 f0 e0 00 Error: UNC 65288 sectors at LBA = 0x000008f0 = 2288 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 00 00 08 f0 e0 00 16:05:59.151 READ DMA e5 00 00 00 00 00 00 00 00 00 00 00 00 16:05:59.151 CHECK POWER MODE e5 00 00 00 00 00 00 00 00 00 00 00 00 16:05:59.150 CHECK POWER MODE 27 00 00 00 00 00 00 00 00 00 00 e0 00 16:05:59.149 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 00 16:05:59.147 IDENTIFY DEVICE Error 4898 [33] occurred at disk power-on lifetime: 3177 hours (132 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 08 08 00 00 00 00 08 f0 e0 00 Error: UNC 2056 sectors at LBA = 0x000008f0 = 2288 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 00 00 08 f0 e0 00 16:05:55.311 READ DMA c8 00 00 00 08 00 00 00 00 08 e8 e0 00 16:05:55.310 READ DMA c8 00 00 00 08 00 00 00 00 08 e0 e0 00 16:05:55.310 READ DMA c8 00 00 00 08 00 00 00 00 08 d8 e0 00 16:05:55.309 READ DMA c8 00 00 00 08 00 00 00 00 08 d0 e0 00 16:05:55.308 READ DMA Error 4897 [32] occurred at disk power-on lifetime: 3177 hours (132 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 10 00 00 00 00 08 f0 e0 00 Error: UNC 272 sectors at LBA = 0x000008f0 = 2288 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 80 00 00 00 00 08 80 e0 00 16:05:51.436 READ DMA EXT c8 00 00 00 38 00 00 00 00 08 40 e0 00 16:05:51.435 READ DMA c8 00 00 00 18 00 00 00 00 08 20 e0 00 16:05:51.435 READ DMA c8 00 00 00 08 00 00 00 00 08 10 e0 00 16:05:51.435 READ DMA c8 00 00 00 08 00 00 00 00 08 78 e0 00 16:05:51.434 READ DMA Error 4896 [31] occurred at disk power-on lifetime: 3177 hours (132 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 08 08 00 00 00 00 08 f0 e0 00 Error: UNC 2056 sectors at LBA = 0x000008f0 = 2288 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 00 00 00 08 f0 e0 00 16:05:47.526 READ DMA 27 00 00 00 00 00 00 00 00 00 00 e0 00 16:05:47.525 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 00 16:05:47.523 IDENTIFY DEVICE ef 00 03 00 45 00 00 00 00 00 00 a0 00 16:05:47.521 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 00 16:05:47.496 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 3186 - # 2 Short offline Completed: read failure 00% 3120 2288 # 3 Short offline Completed: read failure 00% 2978 2288 # 4 Short offline Completed: read failure 00% 2978 2288 # 5 Short offline Aborted by host 90% 56445 - # 6 Short offline Completed without error 00% 52477 - # 7 Short offline Completed without error 00% 52401 - # 8 Short offline Completed without error 00% 47684 - # 9 Short offline Completed without error 00% 47667 - #10 Short offline Completed without error 00% 47666 - #11 Short offline Completed without error 00% 46227 - #12 Short offline Completed without error 00% 41515 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 1 (0x0001) SCT Support Level: 1 Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 32/36 Celsius Lifetime Min/Max Temperature: 17/50 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/55 Celsius Min/Max Temperature Limit: 5/55 Celsius Temperature History Size (Index): 478 (21) Index Estimated Time Temperature Celsius 22 2025-03-07 05:39 35 **************** ... ..(277 skipped). .. **************** 300 2025-03-07 10:17 35 **************** 301 2025-03-07 10:18 36 ***************** 302 2025-03-07 10:19 35 **************** 303 2025-03-07 10:20 35 **************** 304 2025-03-07 10:21 36 ***************** 305 2025-03-07 10:22 35 **************** 306 2025-03-07 10:23 35 **************** 307 2025-03-07 10:24 36 ***************** 308 2025-03-07 10:25 36 ***************** 309 2025-03-07 10:26 35 **************** 310 2025-03-07 10:27 35 **************** 311 2025-03-07 10:28 36 ***************** 312 2025-03-07 10:29 35 **************** ... ..( 4 skipped). .. **************** 317 2025-03-07 10:34 35 **************** 318 2025-03-07 10:35 36 ***************** 319 2025-03-07 10:36 35 **************** 320 2025-03-07 10:37 36 ***************** 321 2025-03-07 10:38 36 ***************** 322 2025-03-07 10:39 36 ***************** 323 2025-03-07 10:40 35 **************** 324 2025-03-07 10:41 36 ***************** ... ..( 6 skipped). .. ***************** 331 2025-03-07 10:48 36 ***************** 332 2025-03-07 10:49 35 **************** 333 2025-03-07 10:50 35 **************** 334 2025-03-07 10:51 35 **************** 335 2025-03-07 10:52 36 ***************** ... ..( 4 skipped). .. ***************** 340 2025-03-07 10:57 36 ***************** 341 2025-03-07 10:58 35 **************** 342 2025-03-07 10:59 35 **************** 343 2025-03-07 11:00 36 ***************** 344 2025-03-07 11:01 35 **************** ... ..( 4 skipped). .. **************** 349 2025-03-07 11:06 35 **************** 350 2025-03-07 11:07 34 *************** 351 2025-03-07 11:08 35 **************** 352 2025-03-07 11:09 35 **************** 353 2025-03-07 11:10 35 **************** 354 2025-03-07 11:11 34 *************** ... ..( 2 skipped). .. *************** 357 2025-03-07 11:14 34 *************** 358 2025-03-07 11:15 35 **************** 359 2025-03-07 11:16 34 *************** ... ..( 6 skipped). .. *************** 366 2025-03-07 11:23 34 *************** 367 2025-03-07 11:24 35 **************** 368 2025-03-07 11:25 34 *************** 369 2025-03-07 11:26 35 **************** ... ..( 15 skipped). .. **************** 385 2025-03-07 11:42 35 **************** 386 2025-03-07 11:43 36 ***************** ... ..( 6 skipped). .. ***************** 393 2025-03-07 11:50 36 ***************** 394 2025-03-07 11:51 35 **************** 395 2025-03-07 11:52 35 **************** 396 2025-03-07 11:53 36 ***************** 397 2025-03-07 11:54 35 **************** ... ..( 3 skipped). .. **************** 401 2025-03-07 11:58 35 **************** 402 2025-03-07 11:59 36 ***************** 403 2025-03-07 12:00 35 **************** 404 2025-03-07 12:01 35 **************** 405 2025-03-07 12:02 36 ***************** 406 2025-03-07 12:03 36 ***************** 407 2025-03-07 12:04 36 ***************** 408 2025-03-07 12:05 35 **************** ... ..( 6 skipped). .. **************** 415 2025-03-07 12:12 35 **************** 416 2025-03-07 12:13 34 *************** 417 2025-03-07 12:14 34 *************** 418 2025-03-07 12:15 35 **************** 419 2025-03-07 12:16 35 **************** 420 2025-03-07 12:17 34 *************** 421 2025-03-07 12:18 35 **************** ... ..( 6 skipped). .. **************** 428 2025-03-07 12:25 35 **************** 429 2025-03-07 12:26 36 ***************** 430 2025-03-07 12:27 35 **************** ... ..( 3 skipped). .. **************** 434 2025-03-07 12:31 35 **************** 435 2025-03-07 12:32 34 *************** 436 2025-03-07 12:33 35 **************** 437 2025-03-07 12:34 34 *************** ... ..( 3 skipped). .. *************** 441 2025-03-07 12:38 34 *************** 442 2025-03-07 12:39 35 **************** ... ..( 10 skipped). .. **************** 453 2025-03-07 12:50 35 **************** 454 2025-03-07 12:51 34 *************** ... ..( 2 skipped). .. *************** 457 2025-03-07 12:54 34 *************** 458 2025-03-07 12:55 35 **************** 459 2025-03-07 12:56 34 *************** 460 2025-03-07 12:57 35 **************** ... ..( 28 skipped). .. **************** 11 2025-03-07 13:26 35 **************** 12 2025-03-07 13:27 34 *************** 13 2025-03-07 13:28 35 **************** 14 2025-03-07 13:29 34 *************** 15 2025-03-07 13:30 35 **************** 16 2025-03-07 13:31 34 *************** ... ..( 4 skipped). .. *************** 21 2025-03-07 13:36 34 *************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 34164 --- Lifetime Power-On Resets 0x01 0x010 4 68857 --- Power-on Hours 0x01 0x018 6 18403107011 --- Logical Sectors Written 0x01 0x020 6 109985613 --- Number of Write Commands 0x01 0x028 6 48174474585 --- Logical Sectors Read 0x01 0x030 6 313977819 --- Number of Read Commands 0x02 ===== = = === == Free-Fall Statistics (rev 1) == 0x02 0x010 4 15 --- Overlimit Shock Events 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 61172 --- Spindle Motor Power-on Hours 0x03 0x010 4 48024 --- Head Flying Hours 0x03 0x018 4 1185696 --- Head Load Events 0x03 0x020 4 792 --- Number of Reallocated Logical Sectors 0x03 0x028 4 2 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 4741 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 881 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 34 --- Current Temperature 0x05 0x010 1 34 N-- Average Short Term Temperature 0x05 0x018 1 32 N-- Average Long Term Temperature 0x05 0x020 1 50 --- Highest Temperature 0x05 0x028 1 17 --- Lowest Temperature 0x05 0x030 1 42 N-- Highest Average Short Term Temperature 0x05 0x038 1 26 N-- Lowest Average Short Term Temperature 0x05 0x040 1 39 N-- Highest Average Long Term Temperature 0x05 0x048 1 28 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 55 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 5 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 108915 --- Number of Hardware Resets 0x06 0x018 4 11 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 114 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 6 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 6 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.4.0-208-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green Device Model: WDC WD10EACS-00D6B0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.5, 3.0 Gb/s Local Time is: Fri Mar 7 13:36:24 2025 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (21600) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 248) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 179 051 - 69 3 Spin_Up_Time POS--K 179 157 021 - 6050 4 Start_Stop_Count -O--CK 097 097 000 - 3114 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 051 - 0 9 Power_On_Hours -O--CK 066 066 000 - 25184 10 Spin_Retry_Count -O--CK 100 100 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 051 - 0 12 Power_Cycle_Count -O--CK 097 097 000 - 3112 192 Power-Off_Retract_Count -O--CK 199 199 000 - 751 193 Load_Cycle_Count -O--CK 199 199 000 - 3114 194 Temperature_Celsius -O---K 112 104 000 - 38 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 85 200 Multi_Zone_Error_Rate ---R-- 200 200 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 4415 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4415 [22] occurred at disk power-on lifetime: 24414 hours (1017 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 13 00 70 00 d0 ea 00 Error: UNC at LBA = 0x130a7000d0 = 81779491024 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 13 00 70 00 d0 ea 08 00:04:12.878 READ DMA 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:04:12.877 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:04:12.875 IDENTIFY DEVICE ef 00 03 00 44 00 00 00 00 00 00 a0 08 00:04:12.875 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:04:12.875 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 4414 [21] occurred at disk power-on lifetime: 24414 hours (1017 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 13 00 70 00 d0 ea 00 Error: UNC at LBA = 0x130a7000d0 = 81779491024 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 13 00 70 00 d0 ea 08 00:04:09.788 READ DMA c8 00 00 00 08 00 13 00 74 00 18 ea 08 00:04:09.787 READ DMA c8 00 00 00 08 00 13 00 74 00 10 ea 08 00:04:09.787 READ DMA c8 00 00 00 08 00 13 00 74 00 08 ea 08 00:04:09.787 READ DMA c8 00 00 00 08 00 13 00 74 00 00 ea 08 00:04:09.787 READ DMA Error 4413 [20] occurred at disk power-on lifetime: 24414 hours (1017 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 13 00 70 00 d0 ea 00 Error: UNC at LBA = 0x130a7000d0 = 81779491024 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 13 00 70 00 d0 ea 08 00:04:06.813 READ DMA 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:04:06.813 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:04:06.810 IDENTIFY DEVICE ef 00 03 00 44 00 00 00 00 00 00 a0 08 00:04:06.810 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:04:06.810 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 4412 [19] occurred at disk power-on lifetime: 24414 hours (1017 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 13 00 70 00 d0 ea 00 Error: UNC at LBA = 0x130a7000d0 = 81779491024 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 13 00 70 00 d0 ea 08 00:04:03.868 READ DMA 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:04:03.867 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:04:03.865 IDENTIFY DEVICE ef 00 03 00 44 00 00 00 00 00 00 a0 08 00:04:03.864 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:04:03.864 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 4411 [18] occurred at disk power-on lifetime: 24414 hours (1017 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 13 00 70 00 d0 ea 00 Error: UNC at LBA = 0x130a7000d0 = 81779491024 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 13 00 70 00 d0 ea 08 00:04:00.766 READ DMA c8 00 00 00 08 00 13 00 6f 00 d8 ea 08 00:04:00.766 READ DMA c8 00 00 00 08 00 13 00 6f 00 d0 ea 08 00:04:00.766 READ DMA c8 00 00 00 08 00 13 00 6f 00 c8 ea 08 00:04:00.765 READ DMA c8 00 00 00 08 00 13 00 6f 00 c0 ea 08 00:04:00.765 READ DMA Error 4410 [17] occurred at disk power-on lifetime: 24414 hours (1017 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 13 00 70 00 d0 ea 00 Error: UNC at LBA = 0x130a7000d0 = 81779491024 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 13 00 70 00 d0 ea 08 00:04:30.542 READ DMA 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:04:30.541 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:04:30.539 IDENTIFY DEVICE ef 00 03 00 44 00 00 00 00 00 00 a0 08 00:04:30.539 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:04:30.539 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 4409 [16] occurred at disk power-on lifetime: 24414 hours (1017 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 13 00 70 00 d0 ea 00 Error: UNC at LBA = 0x130a7000d0 = 81779491024 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 13 00 70 00 d0 ea 08 00:04:27.443 READ DMA c8 00 00 00 08 00 13 00 73 00 18 ea 08 00:04:27.442 READ DMA c8 00 00 00 08 00 13 00 73 00 10 ea 08 00:04:27.441 READ DMA c8 00 00 00 08 00 13 00 73 00 08 ea 08 00:04:27.441 READ DMA c8 00 00 00 08 00 13 00 73 00 00 ea 08 00:04:27.441 READ DMA Error 4408 [15] occurred at disk power-on lifetime: 24414 hours (1017 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 13 00 70 00 d0 ea 00 Error: UNC at LBA = 0x130a7000d0 = 81779491024 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 08 00 13 00 70 00 d0 ea 08 00:04:24.300 READ DMA 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:04:24.300 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:04:24.297 IDENTIFY DEVICE ef 00 03 00 44 00 00 00 00 00 00 a0 08 00:04:24.297 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:04:24.297 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 20260 - # 2 Short offline Completed without error 00% 8815 - # 3 Short offline Completed without error 00% 8786 - # 4 Short offline Completed without error 00% 8783 - # 5 Short offline Completed without error 00% 8782 - # 6 Short offline Completed without error 00% 8781 - # 7 Short offline Completed without error 00% 8781 - # 8 Short offline Aborted by host 10% 8770 - # 9 Short offline Completed: read failure 90% 8769 216602087 #10 Short offline Aborted by host 10% 8769 - #11 Short offline Aborted by host 10% 8769 - #12 Short offline Completed: read failure 90% 8692 216602087 #13 Short offline Completed: read failure 90% 8692 216602087 #14 Short offline Completed without error 00% 4083 - #15 Short offline Completed without error 00% 4083 - #16 Short offline Completed without error 00% 4074 - #17 Short offline Completed: read failure 90% 4026 6427834 #18 Short offline Completed: read failure 90% 4018 6427834 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 38 Celsius Power Cycle Min/Max Temperature: 35/41 Celsius Lifetime Min/Max Temperature: 31/46 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (68) Index Estimated Time Temperature Celsius 69 2025-03-07 05:39 38 ******************* ... ..( 78 skipped). .. ******************* 148 2025-03-07 06:58 38 ******************* 149 2025-03-07 06:59 39 ******************** ... ..( 14 skipped). .. ******************** 164 2025-03-07 07:14 39 ******************** 165 2025-03-07 07:15 40 ********************* 166 2025-03-07 07:16 40 ********************* 167 2025-03-07 07:17 40 ********************* 168 2025-03-07 07:18 39 ******************** 169 2025-03-07 07:19 40 ********************* ... ..( 2 skipped). .. ********************* 172 2025-03-07 07:22 40 ********************* 173 2025-03-07 07:23 39 ******************** ... ..( 17 skipped). .. ******************** 191 2025-03-07 07:41 39 ******************** 192 2025-03-07 07:42 38 ******************* 193 2025-03-07 07:43 39 ******************** ... ..( 55 skipped). .. ******************** 249 2025-03-07 08:39 39 ******************** 250 2025-03-07 08:40 38 ******************* ... ..(145 skipped). .. ******************* 396 2025-03-07 11:06 38 ******************* 397 2025-03-07 11:07 37 ****************** 398 2025-03-07 11:08 38 ******************* ... ..(147 skipped). .. ******************* 68 2025-03-07 13:36 38 ******************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x8000 4 93621 Vendor specific /dev/sdc smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.4.0-208-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WDS480G2G0A-00JH30 Serial Number: -- LU WWN Device Id: 5 001b44 ... Firmware Version: UG400400 User Capacity: 480,103,981,056 bytes [480 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3, ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Mar 7 13:36:24 2025 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 83) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 9 Power_On_Hours -O--CK 100 100 000 - 28135 12 Power_Cycle_Count -O--CK 100 100 000 - 599 165 Unknown_Attribute -O--CK 100 100 000 - 6371 166 Unknown_Attribute -O--CK 100 100 --- - 42 167 Unknown_Attribute -O--CK 100 100 --- - 28 168 Unknown_Attribute -O--CK 100 100 --- - 89 169 Unknown_Attribute -O--CK 100 100 --- - 228 170 Unknown_Attribute -O--CK 100 100 --- - 0 171 Unknown_Attribute -O--CK 100 100 000 - 0 172 Unknown_Attribute -O--CK 100 100 000 - 0 173 Unknown_Attribute -O--CK 100 100 000 - 42 174 Unknown_Attribute -O--CK 100 100 000 - 450 184 End-to-End_Error -O--CK 100 100 --- - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 --- - 0 194 Temperature_Celsius -O---K 066 057 000 - 34 (Min/Max 14/57) 199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 230 Unknown_SSD_Attribute -O--CK 100 100 000 - 19877245489684 232 Available_Reservd_Space PO--CK 100 100 005 - 100 233 Media_Wearout_Indicator -O--CK 100 100 --- - 21474 234 Unknown_Attribute -O--CK 100 100 000 - 78850 241 Total_LBAs_Written ----CK 100 100 000 - 30580 242 Total_LBAs_Read ----CK 100 100 000 - 38176 244 Unknown_Attribute -O--CK 000 100 --- - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 16 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 1 Device vendor specific log 0xa2 GPL,SL VS 2 Device vendor specific log 0xa3-0xa4 GPL,SL VS 1 Device vendor specific log 0xa7 GPL,SL VS 1 Device vendor specific log 0xa9 GPL,SL VS 4 Device vendor specific log Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. SMART Extended Comprehensive Error Log Version: 1 (16 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 21483 - # 2 Short offline Completed without error 00% 18423 - # 3 Short offline Completed without error 00% 13661 - # 4 Extended offline Aborted by host 90% 12065 - # 5 Extended offline Self-test routine in progress 90% 12065 - # 6 Short offline Completed without error 00% 12065 - # 7 Short offline Completed without error 00% 8563 - # 8 Short offline Completed without error 00% 3116 - # 9 Short offline Self-test routine in progress 80% 3116 - #10 Short offline Completed without error 00% 2559 - #11 Short offline Completed without error 00% 184 - Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 599 --- Lifetime Power-On Resets 0x01 0x010 4 28135 --- Power-on Hours 0x01 0x018 6 64131449039 --- Logical Sectors Written 0x01 0x028 6 80062349142 --- Logical Sectors Read 0x01 0x038 6 28135 --- Date and Time TimeStamp 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 34 --- Current Temperature 0x05 0x010 1 34 --- Average Short Term Temperature 0x05 0x018 1 - --- Average Long Term Temperature 0x05 0x020 1 56 --- Highest Temperature 0x05 0x028 1 26 --- Lowest Temperature 0x05 0x030 1 44 --- Highest Average Short Term Temperature 0x05 0x038 1 44 --- Lowest Average Short Term Temperature 0x05 0x040 1 - --- Highest Average Long Term Temperature 0x05 0x048 1 - --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 95 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 9 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 9 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0001 2 0 Command failed due to ICRC error