/dev/nvme0n1 smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.10-arch1-1] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: E12-256G-PHISON-SSD-B3-BB1 Serial Number: -- Firmware Version: ECFM12.1 PCI Vendor/Subsystem ID: 0x1987 IEEE OUI Identifier: 0x6479a7 Total NVM Capacity: 256,060,514,304 [256 GB] Unallocated NVM Capacity: 0 Controller ID: 1 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 6479a7 ... Local Time is: Thu Jan 11 12:34:46 2024 CET Firmware Updates (0x12): 1 Slot, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005d): Comp DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x0c): Ext_Get_Lg Telmtry_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 70 Celsius Critical Comp. Temp. Threshold: 90 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.80W - - 0 0 0 0 0 0 1 + 5.74W - - 1 1 1 1 0 0 2 + 5.21W - - 2 2 2 2 0 0 3 - 0.0490W - - 3 3 3 3 2000 2000 4 - 0.0018W - - 4 4 4 4 25000 25000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 1 - 4096 0 1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 39 Celsius Available Spare: 100% Available Spare Threshold: 5% Percentage Used: 5% Data Units Read: 6,320,527 [3.23 TB] Data Units Written: 9,770,694 [5.00 TB] Host Read Commands: 74,840,904 Host Write Commands: 103,530,609 Controller Busy Time: 433 Power Cycles: 697 Power On Hours: 2,318 Unsafe Shutdowns: 64 Media and Data Integrity Errors: 0 Error Information Log Entries: 2,931 Warning Comp. Temperature Time: 413 Critical Comp. Temperature Time: 0 Error Information (NVMe Log 0x01, 16 of 63 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS Message 0 2931 0 0xd007 0x4004 0x004 0 1 - Invalid Field in Command 1 2930 0 0x3014 0x4004 0x004 0 1 - Invalid Field in Command 2 2929 0 0x1018 0x4004 0x004 0 1 - Invalid Field in Command 3 2928 0 0x701d 0x4004 0x004 0 1 - Invalid Field in Command 4 2927 0 0x000c 0x4004 0x028 0 0 - Invalid Field in Command 5 2926 0 0x0010 0x4004 0x004 0 1 - Invalid Field in Command 6 2925 0 0x001c 0x4004 0x028 0 0 - Invalid Field in Command 7 2924 0 0x0020 0x4004 - 0 0 - Invalid Field in Command 8 2923 0 0x001c 0x4004 0x004 0 1 - Invalid Field in Command 9 2922 0 0x601b 0x4004 0x004 0 1 - Invalid Field in Command 10 2921 0 0x4006 0x4004 0x004 0 1 - Invalid Field in Command 11 2920 0 0x0000 0x4004 0x028 0 0 - Invalid Field in Command 12 2919 0 0x0014 0x4004 0x004 0 1 - Invalid Field in Command 13 2918 0 0x0011 0x4004 0x004 0 1 - Invalid Field in Command 14 2917 0 0x201c 0x4004 0x004 0 1 - Invalid Field in Command 15 2916 0 0x1016 0x4004 0x004 0 1 - Invalid Field in Command ... (47 entries not read) Read Self-test Log failed: Invalid Field in Command (0x2002) /dev/nvme1n1 smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.10-arch1-1] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: HFM256GDJTNG-8310A Serial Number: -- Firmware Version: 80002C00 PCI Vendor/Subsystem ID: 0x1c5c IEEE OUI Identifier: 0xace42e Controller ID: 1 NVMe Version: 1.2 Number of Namespaces: 1 Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] Namespace 1 Formatted LBA Size: 512 Local Time is: Thu Jan 11 12:34:46 2024 CET Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x0016): Wr_Unc DS_Mngmt Sav/Sel_Feat Log Page Attributes (0x02): Cmd_Eff_Lg Maximum Data Transfer Size: 64 Pages Warning Comp. Temp. Threshold: 81 Celsius Critical Comp. Temp. Threshold: 82 Celsius Namespace 1 Features (0x02): NA_Fields Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 3.5000W - - 0 0 0 0 5 5 1 + 2.4000W - - 1 1 1 1 30 30 2 + 1.9000W - - 2 2 2 2 100 100 3 - 0.0350W - - 3 3 3 3 1000 1000 4 - 0.0035W - - 3 3 3 3 1000 5000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 1 - 4096 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 39 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 5% Data Units Read: 13,899,002 [7.11 TB] Data Units Written: 27,150,282 [13.9 TB] Host Read Commands: 184,917,709 Host Write Commands: 218,748,627 Controller Busy Time: 2,242 Power Cycles: 940 Power On Hours: 531 Unsafe Shutdowns: 40 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 39 Celsius Temperature Sensor 2: 39 Celsius Error Information (NVMe Log 0x01, 16 of 256 entries) No Errors Logged Self-test Log (NVMe Log 0x06) Self-test status: No self-test in progress No Self-tests Logged /dev/sda smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.10-arch1-1] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 850 EVO 250GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EMT02B6Q User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: In smartctl database 7.3/5528 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Jan 11 12:34:46 2024 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 133) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 097 097 000 - 12898 12 Power_Cycle_Count -O--CK 098 098 000 - 1268 177 Wear_Leveling_Count PO--C- 099 099 000 - 13 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 064 042 000 - 36 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 75 241 Total_LBAs_Written -O--CK 099 099 000 - 7474887897 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 26/42 Celsius Lifetime Min/Max Temperature: 19/58 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (10) Index Estimated Time Temperature Celsius 11 2024-01-10 15:20 33 ************** ... ..( 6 skipped). .. ************** 18 2024-01-10 16:30 33 ************** 19 2024-01-10 16:40 34 *************** ... ..( 3 skipped). .. *************** 23 2024-01-10 17:20 34 *************** 24 2024-01-10 17:30 33 ************** ... ..( 4 skipped). .. ************** 29 2024-01-10 18:20 33 ************** 30 2024-01-10 18:30 34 *************** ... ..( 4 skipped). .. *************** 35 2024-01-10 19:20 34 *************** 36 2024-01-10 19:30 35 **************** 37 2024-01-10 19:40 36 ***************** 38 2024-01-10 19:50 36 ***************** 39 2024-01-10 20:00 36 ***************** 40 2024-01-10 20:10 35 **************** 41 2024-01-10 20:20 36 ***************** ... ..( 4 skipped). .. ***************** 46 2024-01-10 21:10 36 ***************** 47 2024-01-10 21:20 35 **************** ... ..( 2 skipped). .. **************** 50 2024-01-10 21:50 35 **************** 51 2024-01-10 22:00 34 *************** ... ..( 4 skipped). .. *************** 56 2024-01-10 22:50 34 *************** 57 2024-01-10 23:00 33 ************** 58 2024-01-10 23:10 33 ************** 59 2024-01-10 23:20 34 *************** 60 2024-01-10 23:30 35 **************** 61 2024-01-10 23:40 35 **************** 62 2024-01-10 23:50 35 **************** 63 2024-01-11 00:00 36 ***************** 64 2024-01-11 00:10 36 ***************** 65 2024-01-11 00:20 35 **************** 66 2024-01-11 00:30 35 **************** 67 2024-01-11 00:40 34 *************** ... ..( 6 skipped). .. *************** 74 2024-01-11 01:50 34 *************** 75 2024-01-11 02:00 35 **************** 76 2024-01-11 02:10 36 ***************** ... ..( 5 skipped). .. ***************** 82 2024-01-11 03:10 36 ***************** 83 2024-01-11 03:20 39 ******************** 84 2024-01-11 03:30 37 ****************** 85 2024-01-11 03:40 36 ***************** 86 2024-01-11 03:50 38 ******************* 87 2024-01-11 04:00 38 ******************* 88 2024-01-11 04:10 38 ******************* 89 2024-01-11 04:20 37 ****************** 90 2024-01-11 04:30 36 ***************** ... ..( 2 skipped). .. ***************** 93 2024-01-11 05:00 36 ***************** 94 2024-01-11 05:10 37 ****************** 95 2024-01-11 05:20 37 ****************** 96 2024-01-11 05:30 36 ***************** 97 2024-01-11 05:40 37 ****************** ... ..( 4 skipped). .. ****************** 102 2024-01-11 06:30 37 ****************** 103 2024-01-11 06:40 36 ***************** 104 2024-01-11 06:50 36 ***************** 105 2024-01-11 07:00 36 ***************** 106 2024-01-11 07:10 ? - 107 2024-01-11 07:20 26 ******* 108 2024-01-11 07:30 29 ********** 109 2024-01-11 07:40 30 *********** 110 2024-01-11 07:50 31 ************ 111 2024-01-11 08:00 34 *************** 112 2024-01-11 08:10 34 *************** 113 2024-01-11 08:20 34 *************** 114 2024-01-11 08:30 37 ****************** 115 2024-01-11 08:40 40 ********************* 116 2024-01-11 08:50 36 ***************** 117 2024-01-11 09:00 35 **************** 118 2024-01-11 09:10 40 ********************* 119 2024-01-11 09:20 42 *********************** 120 2024-01-11 09:30 38 ******************* 121 2024-01-11 09:40 38 ******************* 122 2024-01-11 09:50 38 ******************* 123 2024-01-11 10:00 37 ****************** 124 2024-01-11 10:10 36 ***************** 125 2024-01-11 10:20 37 ****************** 126 2024-01-11 10:30 37 ****************** 127 2024-01-11 10:40 36 ***************** ... ..( 4 skipped). .. ***************** 4 2024-01-11 11:30 36 ***************** 5 2024-01-11 11:40 37 ****************** 6 2024-01-11 11:50 37 ****************** 7 2024-01-11 12:00 37 ****************** 8 2024-01-11 12:10 36 ***************** 9 2024-01-11 12:20 36 ***************** 10 2024-01-11 12:30 36 ***************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 12 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 10 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC