/dev/sda === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F3 Device Model: SAMSUNG HD502HJ Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 1AJ100E4 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Mon Jul 23 15:42:49 2018 +06 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4740) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 79) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 13 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 084 083 025 - 5139 4 Start_Stop_Count -O--CK 098 098 000 - 2569 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 12062 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 252 252 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2392 191 G-Sense_Error_Rate -O---K 100 100 000 - 3768 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 061 050 000 - 39 (Min/Max 14/50) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 98 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 317 223 Load_Retry_Count -O--CK 252 252 000 - 0 225 Load_Cycle_Count -O--CK 100 100 000 - 2625 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xbb GPL VS 4 Device vendor specific log 0xbc GPL VS 2 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 110 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 110 [5] occurred at disk power-on lifetime: 11291 hours (470 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 01 00 00 3a 38 8b 01 e0 00 Error: IDNF 1 sectors at LBA = 0x3a388b01 = 976784129 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 3a 38 8b 01 e0 08 00:00:00.782 READ DMA EXT c6 00 00 00 10 00 00 00 00 00 00 e0 08 00:00:00.782 SET MULTIPLE MODE 91 00 00 00 3f 00 00 00 00 00 00 ef 08 00:00:00.782 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:00.782 RECALIBRATE [OBS-4] 00 00 00 00 01 00 00 00 00 00 01 40 08 00:00:00.782 NOP [Abort queued commands] Error 109 [4] occurred at disk power-on lifetime: 11291 hours (470 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 01 00 00 3a 38 8b 01 e0 00 Error: IDNF 1 sectors at LBA = 0x3a388b01 = 976784129 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 3a 38 8b 01 e0 08 00:00:00.782 READ DMA EXT 25 00 00 00 01 00 00 0c 80 38 00 e0 08 00:00:00.781 READ DMA EXT 25 00 00 00 01 00 00 3a 38 8b 01 e0 08 00:00:00.781 READ DMA EXT c6 00 00 00 10 00 00 00 00 00 00 e0 08 00:00:00.781 SET MULTIPLE MODE 91 00 00 00 3f 00 00 00 00 00 00 ef 08 00:00:00.781 INITIALIZE DEVICE PARAMETERS [OBS-6] Error 108 [3] occurred at disk power-on lifetime: 11291 hours (470 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 01 00 00 3a 38 8b 01 e0 00 Error: IDNF 1 sectors at LBA = 0x3a388b01 = 976784129 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 3a 38 8b 01 e0 08 00:00:00.781 READ DMA EXT c6 00 00 00 10 00 00 00 00 00 00 e0 08 00:00:00.781 SET MULTIPLE MODE 91 00 00 00 3f 00 00 00 00 00 00 ef 08 00:00:00.781 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:00.781 RECALIBRATE [OBS-4] 00 00 00 00 01 00 00 00 00 00 01 40 08 00:00:00.781 NOP [Abort queued commands] Error 107 [2] occurred at disk power-on lifetime: 11291 hours (470 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 01 00 00 3a 38 8b 01 e0 00 Error: IDNF 1 sectors at LBA = 0x3a388b01 = 976784129 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 3a 38 8b 01 e0 08 00:00:00.781 READ DMA EXT 25 00 00 00 08 00 00 00 00 00 57 e0 08 00:00:00.781 READ DMA EXT 25 00 00 00 08 00 00 00 02 1a cf e0 08 00:00:00.781 READ DMA EXT 25 00 00 00 24 00 00 00 02 1a ab e0 08 00:00:00.781 READ DMA EXT 25 00 00 00 4a 00 00 00 02 1a 61 e0 08 00:00:00.781 READ DMA EXT Error 106 [1] occurred at disk power-on lifetime: 11291 hours (470 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 01 00 00 3a 38 8b 01 e0 00 Error: IDNF 1 sectors at LBA = 0x3a388b01 = 976784129 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 3a 38 8b 01 e0 08 00:00:00.781 READ DMA EXT c6 00 00 00 10 00 00 00 00 00 00 e0 08 00:00:00.781 SET MULTIPLE MODE 91 00 00 00 3f 00 00 00 00 00 00 ef 08 00:00:00.781 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:00.781 RECALIBRATE [OBS-4] 00 00 00 00 01 00 00 00 00 00 01 40 08 00:00:00.781 NOP [Abort queued commands] Error 105 [0] occurred at disk power-on lifetime: 11291 hours (470 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 01 00 00 3a 38 8b 01 e0 00 Error: IDNF 1 sectors at LBA = 0x3a388b01 = 976784129 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 3a 38 8b 01 e0 08 00:00:00.781 READ DMA EXT 25 00 00 00 01 00 00 3a 38 8b 01 e0 08 00:00:00.781 READ DMA EXT c6 00 00 00 10 00 00 00 00 00 00 e0 08 00:00:00.781 SET MULTIPLE MODE 91 00 00 00 3f 00 00 00 00 00 00 ef 08 00:00:00.781 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:00.781 RECALIBRATE [OBS-4] Error 104 [7] occurred at disk power-on lifetime: 11291 hours (470 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 01 00 00 3a 38 8b 01 e0 00 Error: IDNF 1 sectors at LBA = 0x3a388b01 = 976784129 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 3a 38 8b 01 e0 08 00:00:00.781 READ DMA EXT c6 00 00 00 10 00 00 00 00 00 00 e0 08 00:00:00.781 SET MULTIPLE MODE 91 00 00 00 3f 00 00 00 00 00 00 ef 08 00:00:00.781 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 00 00 00 00 00 00 00 00 00 e0 08 00:00:00.781 RECALIBRATE [OBS-4] 00 00 00 00 01 00 00 00 00 00 01 40 08 00:00:00.780 NOP [Abort queued commands] Error 103 [6] occurred at disk power-on lifetime: 11291 hours (470 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 01 00 00 3a 38 8b 01 e0 00 Error: IDNF 1 sectors at LBA = 0x3a388b01 = 976784129 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 3a 38 8b 01 e0 08 00:00:00.780 READ DMA EXT 25 00 00 00 01 00 00 0c 80 40 07 e0 08 00:00:00.780 READ DMA EXT 25 00 00 00 01 00 00 0c 80 40 07 e0 08 00:00:00.780 READ DMA EXT 25 00 00 00 01 00 00 00 00 00 3f e0 08 00:00:00.780 READ DMA EXT 25 00 00 00 01 00 00 00 00 00 3f e0 08 00:00:00.780 READ DMA EXT SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 11668 - # 2 Extended offline Aborted by host 90% 11668 - # 3 Short offline Completed without error 00% 11280 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 38 Celsius Power Cycle Min/Max Temperature: 25/38 Celsius Lifetime Min/Max Temperature: 16/50 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (86) Index Estimated Time Temperature Celsius 87 2018-07-23 05:05 43 ************************ 88 2018-07-23 05:10 42 *********************** 89 2018-07-23 05:15 43 ************************ ... ..( 6 skipped). .. ************************ 96 2018-07-23 05:50 43 ************************ 97 2018-07-23 05:55 42 *********************** ... ..( 3 skipped). .. *********************** 101 2018-07-23 06:15 42 *********************** 102 2018-07-23 06:20 43 ************************ 103 2018-07-23 06:25 42 *********************** 104 2018-07-23 06:30 43 ************************ ... ..( 34 skipped). .. ************************ 11 2018-07-23 09:25 43 ************************ 12 2018-07-23 09:30 26 ******* 13 2018-07-23 09:35 28 ********* 14 2018-07-23 09:40 31 ************ 15 2018-07-23 09:45 32 ************* 16 2018-07-23 09:50 34 *************** 17 2018-07-23 09:55 36 ***************** 18 2018-07-23 10:00 37 ****************** 19 2018-07-23 10:05 38 ******************* 20 2018-07-23 10:10 38 ******************* 21 2018-07-23 10:15 39 ******************** 22 2018-07-23 10:20 40 ********************* 23 2018-07-23 10:25 40 ********************* 24 2018-07-23 10:30 41 ********************** ... ..( 4 skipped). .. ********************** 29 2018-07-23 10:55 41 ********************** 30 2018-07-23 11:00 40 ********************* 31 2018-07-23 11:05 40 ********************* 32 2018-07-23 11:10 41 ********************** ... ..( 22 skipped). .. ********************** 55 2018-07-23 13:05 41 ********************** 56 2018-07-23 13:10 42 *********************** ... ..( 2 skipped). .. *********************** 59 2018-07-23 13:25 42 *********************** 60 2018-07-23 13:30 41 ********************** ... ..( 3 skipped). .. ********************** 64 2018-07-23 13:50 41 ********************** 65 2018-07-23 13:55 42 *********************** ... ..( 11 skipped). .. *********************** 77 2018-07-23 14:55 42 *********************** 78 2018-07-23 15:00 25 ****** 79 2018-07-23 15:05 28 ********* 80 2018-07-23 15:10 30 *********** 81 2018-07-23 15:15 32 ************* 82 2018-07-23 15:20 34 *************** 83 2018-07-23 15:25 35 **************** 84 2018-07-23 15:30 36 ***************** 85 2018-07-23 15:35 38 ******************* 86 2018-07-23 15:40 38 ******************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 2 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific /dev/sdb === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.12 Device Model: ST31000528AS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: CC38 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Mon Jul 23 15:42:50 2018 +06 ==> WARNING: A firmware update for this drive may be available, see the following Seagate web pages: http://knowledge.seagate.com/articles/en_US/FAQ/207931en http://knowledge.seagate.com/articles/en_US/FAQ/213891en SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 609) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 179) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 118 099 006 - 175433484 3 Spin_Up_Time PO---- 095 093 000 - 0 4 Start_Stop_Count -O--CK 089 089 020 - 11551 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 078 060 030 - 4362745779 9 Power_On_Hours -O--CK 079 079 000 - 18719 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 097 037 020 - 3503 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 099 000 - 4295098372 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 064 048 045 - 36 (Min/Max 25/36) 194 Temperature_Celsius -O---K 036 052 000 - 36 (0 16 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 030 021 000 - 175433484 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 31744 (76 60 0) 241 Total_LBAs_Written ------ 100 253 000 - 943196789 242 Total_LBAs_Read ------ 100 253 000 - 1160275891 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 2928 Device vendor specific log 0xbd GPL VS 252 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 18427 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 25/36 Celsius Lifetime Min/Max Temperature: 16/52 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (30) Index Estimated Time Temperature Celsius 31 2018-07-18 10:43 33 ************** 32 2018-07-18 11:42 ? - 33 2018-07-18 12:41 21 ** 34 2018-07-18 13:40 21 ** 35 2018-07-18 14:39 34 *************** 36 2018-07-18 15:38 35 **************** 37 2018-07-18 16:37 35 **************** 38 2018-07-18 17:36 35 **************** 39 2018-07-18 18:35 ? - 40 2018-07-18 19:34 22 *** 41 2018-07-18 20:33 22 *** 42 2018-07-18 21:32 ? - 43 2018-07-18 22:31 24 ***** 44 2018-07-18 23:30 24 ***** 45 2018-07-19 00:29 37 ****************** 46 2018-07-19 01:28 ? - 47 2018-07-19 02:27 25 ****** 48 2018-07-19 03:26 25 ****** 49 2018-07-19 04:25 38 ******************* 50 2018-07-19 05:24 39 ******************** 51 2018-07-19 06:23 35 **************** 52 2018-07-19 07:22 39 ******************** 53 2018-07-19 08:21 ? - 54 2018-07-19 09:20 26 ******* 55 2018-07-19 10:19 26 ******* 56 2018-07-19 11:18 ? - 57 2018-07-19 12:17 27 ******** 58 2018-07-19 13:16 27 ******** 59 2018-07-19 14:15 ? - 60 2018-07-19 15:14 26 ******* 61 2018-07-19 16:13 26 ******* 62 2018-07-19 17:12 38 ******************* 63 2018-07-19 18:11 38 ******************* 64 2018-07-19 19:10 ? - 65 2018-07-19 20:09 25 ****** 66 2018-07-19 21:08 25 ****** 67 2018-07-19 22:07 ? - 68 2018-07-19 23:06 26 ******* 69 2018-07-20 00:05 ? - 70 2018-07-20 01:04 29 ********** 71 2018-07-20 02:03 ? - 72 2018-07-20 03:02 26 ******* 73 2018-07-20 04:01 ? - 74 2018-07-20 05:00 26 ******* 75 2018-07-20 05:59 ? - 76 2018-07-20 06:58 33 ************** 77 2018-07-20 07:57 33 ************** 78 2018-07-20 08:56 ? - 79 2018-07-20 09:55 25 ****** 80 2018-07-20 10:54 ? - 81 2018-07-20 11:53 26 ******* 82 2018-07-20 12:52 ? - 83 2018-07-20 13:51 25 ****** 84 2018-07-20 14:50 25 ****** 85 2018-07-20 15:49 37 ****************** 86 2018-07-20 16:48 30 *********** 87 2018-07-20 17:47 30 *********** 88 2018-07-20 18:46 ? - 89 2018-07-20 19:45 26 ******* 90 2018-07-20 20:44 ? - 91 2018-07-20 21:43 26 ******* 92 2018-07-20 22:42 26 ******* 93 2018-07-20 23:41 38 ******************* 94 2018-07-21 00:40 39 ******************** ... ..( 2 skipped). .. ******************** 97 2018-07-21 03:37 39 ******************** 98 2018-07-21 04:36 ? - 99 2018-07-21 05:35 26 ******* 100 2018-07-21 06:34 26 ******* 101 2018-07-21 07:33 38 ******************* 102 2018-07-21 08:32 ? - 103 2018-07-21 09:31 26 ******* 104 2018-07-21 10:30 26 ******* 105 2018-07-21 11:29 38 ******************* 106 2018-07-21 12:28 39 ******************** 107 2018-07-21 13:27 39 ******************** 108 2018-07-21 14:26 40 ********************* ... ..( 3 skipped). .. ********************* 112 2018-07-21 18:22 40 ********************* 113 2018-07-21 19:21 ? - 114 2018-07-21 20:20 27 ******** 115 2018-07-21 21:19 27 ******** 116 2018-07-21 22:18 39 ******************** 117 2018-07-21 23:17 40 ********************* 118 2018-07-22 00:16 39 ******************** 119 2018-07-22 01:15 39 ******************** 120 2018-07-22 02:14 39 ******************** 121 2018-07-22 03:13 ? - 122 2018-07-22 04:12 27 ******** 123 2018-07-22 05:11 27 ******** 124 2018-07-22 06:10 39 ******************** 125 2018-07-22 07:09 39 ******************** 126 2018-07-22 08:08 39 ******************** 127 2018-07-22 09:07 ? - 0 2018-07-22 10:06 26 ******* 1 2018-07-22 11:05 26 ******* 2 2018-07-22 12:04 ? - 3 2018-07-22 13:03 27 ******** 4 2018-07-22 14:02 27 ******** 5 2018-07-22 15:01 39 ******************** 6 2018-07-22 16:00 ? - 7 2018-07-22 16:59 36 ***************** 8 2018-07-22 17:58 36 ***************** 9 2018-07-22 18:57 39 ******************** 10 2018-07-22 19:56 39 ******************** 11 2018-07-22 20:55 40 ********************* 12 2018-07-22 21:54 39 ******************** 13 2018-07-22 22:53 ? - 14 2018-07-22 23:52 27 ******** 15 2018-07-23 00:51 27 ******** 16 2018-07-23 01:50 39 ******************** 17 2018-07-23 02:49 39 ******************** 18 2018-07-23 03:48 40 ********************* 19 2018-07-23 04:47 40 ********************* 20 2018-07-23 05:46 40 ********************* 21 2018-07-23 06:45 ? - 22 2018-07-23 07:44 26 ******* 23 2018-07-23 08:43 26 ******* 24 2018-07-23 09:42 38 ******************* ... ..( 2 skipped). .. ******************* 27 2018-07-23 12:39 38 ******************* 28 2018-07-23 13:38 ? - 29 2018-07-23 14:37 25 ****** 30 2018-07-23 15:36 25 ****** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS