/dev/nvme0n1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.4.2-arch1-1] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: WDC PC SN520 SDAPMUW-512G-1101 Serial Number: -- Firmware Version: 20240001 PCI Vendor/Subsystem ID: 0x15b7 IEEE OUI Identifier: 0x001b44 Total NVM Capacity: 512,110,190,592 [512 GB] Unallocated NVM Capacity: 0 Controller ID: 1 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 001b44 ... Local Time is: Mon Jul 10 22:06:33 2023 WIB Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x001f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Log Page Attributes (0x02): Cmd_Eff_Lg Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 82 Celsius Critical Comp. Temp. Threshold: 86 Celsius Namespace 1 Features (0x02): NA_Fields Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 3.00W - - 0 0 0 0 0 0 1 + 2.60W - - 1 1 1 1 0 0 2 + 1.70W - - 2 2 2 2 0 0 3 - 0.0250W - - 3 3 3 3 5000 9000 4 - 0.0025W - - 4 4 4 4 5000 44000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 1 - 4096 0 1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 47 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 5% Data Units Read: 87,220,860 [44.6 TB] Data Units Written: 51,475,037 [26.3 TB] Host Read Commands: 865,095,187 Host Write Commands: 647,873,553 Controller Busy Time: 2,659 Power Cycles: 4,870 Power On Hours: 10,417 Unsafe Shutdowns: 1,006 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Thermal Temp. 1 Transition Count: 31 Thermal Temp. 1 Total Time: 294 Error Information (NVMe Log 0x01, 16 of 256 entries) No Errors Logged /dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.4.2-arch1-1] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi/HGST Travelstar Z5K500 Device Model: HGST HTS545050A7E380 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: GG2OACD0 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Mon Jul 10 22:06:33 2023 WIB SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 1 (minimum power consumption with standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 113) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 2 Throughput_Performance P-S--- 100 100 040 - 0 3 Spin_Up_Time POS--- 230 230 033 - 1 4 Start_Stop_Count -O--C- 084 084 000 - 25591 5 Reallocated_Sector_Ct PO--CK 087 087 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 100 100 040 - 0 9 Power_On_Hours -O--C- 077 077 000 - 10456 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 096 096 000 - 6451 191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 097 097 000 - 613 193 Load_Cycle_Count -O--C- 085 085 000 - 158465 194 Temperature_Celsius -O---- 171 171 000 - 35 (Min/Max 21/65) 196 Reallocated_Event_Count -O--CK 078 078 000 - 704 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 223 Load_Retry_Count -O-R-- 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 959 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 959 [2] occurred at disk power-on lifetime: 5406 hours (225 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 f8 00 00 0c 94 fb 20 0c 00 Error: WP at LBA = 0x0c94fb20 = 211090208 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 10 00 00 00 5f 0f 88 40 00 00:00:17.656 WRITE FPDMA QUEUED 61 00 08 00 10 00 00 00 5f 0f a0 40 00 00:00:17.656 WRITE FPDMA QUEUED 61 00 08 00 10 00 00 00 60 fe 58 40 00 00:00:17.656 WRITE FPDMA QUEUED 60 00 80 00 08 00 00 00 20 37 28 40 00 00:00:16.875 READ FPDMA QUEUED 60 00 80 00 00 00 00 00 20 36 a8 40 00 00:00:16.875 READ FPDMA QUEUED Error 958 [1] occurred at disk power-on lifetime: 5401 hours (225 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 58 00 00 0c 94 fb c0 0c 00 Error: UNC at LBA = 0x0c94fbc0 = 211090368 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 80 00 08 00 00 00 20 47 20 40 00 00:00:17.986 READ FPDMA QUEUED 60 00 80 00 00 00 00 00 20 46 a0 40 00 00:00:17.986 READ FPDMA QUEUED 61 00 08 00 10 00 00 00 60 44 f0 40 00 00:00:17.985 WRITE FPDMA QUEUED 60 00 80 00 08 00 00 00 20 46 20 40 00 00:00:16.484 READ FPDMA QUEUED 60 00 80 00 00 00 00 00 20 45 a0 40 00 00:00:16.484 READ FPDMA QUEUED Error 957 [0] occurred at disk power-on lifetime: 5399 hours (224 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 e0 00 00 0c 94 fb 38 0c 00 Error: WP at LBA = 0x0c94fb38 = 211090232 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 10 00 00 00 5f 0f 88 40 00 00:00:17.675 WRITE FPDMA QUEUED 61 00 08 00 10 00 00 00 5f 0f a0 40 00 00:00:17.675 WRITE FPDMA QUEUED 61 00 08 00 10 00 00 00 60 9f 68 40 00 00:00:17.673 WRITE FPDMA QUEUED 60 00 80 00 00 00 00 00 20 4b a0 40 00 00:00:17.384 READ FPDMA QUEUED 60 00 80 00 08 00 00 00 20 4b 20 40 00 00:00:16.944 READ FPDMA QUEUED Error 956 [3] occurred at disk power-on lifetime: 5399 hours (224 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 e0 00 00 0c 94 fb 38 0c 00 Error: UNC at LBA = 0x0c94fb38 = 211090232 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 80 00 00 00 00 00 15 39 78 40 00 00:00:14.536 READ FPDMA QUEUED 60 00 80 00 08 00 00 00 15 38 f8 40 00 00:00:14.535 READ FPDMA QUEUED 60 01 00 00 48 00 00 0c 94 fe 18 40 00 00:00:14.498 READ FPDMA QUEUED 60 01 00 00 40 00 00 0c 94 fd 18 40 00 00:00:14.498 READ FPDMA QUEUED 60 01 00 00 38 00 00 0c 94 fc 18 40 00 00:00:14.498 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 9939 - # 2 Short offline Completed without error 00% 9874 - # 3 Short offline Completed without error 00% 8748 - # 4 Short offline Completed without error 00% 8748 - # 5 Short offline Aborted by host 40% 8114 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 35/37 Celsius Lifetime Min/Max Temperature: 21/65 Celsius Specified Max Operating Temperature: 36 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (7) Index Estimated Time Temperature Celsius 8 2023-07-10 19:59 33 ************** 9 2023-07-10 20:00 34 *************** ... ..( 98 skipped). .. *************** 108 2023-07-10 21:39 34 *************** 109 2023-07-10 21:40 ? - 110 2023-07-10 21:41 34 *************** ... ..( 8 skipped). .. *************** 119 2023-07-10 21:50 34 *************** 120 2023-07-10 21:51 35 **************** 121 2023-07-10 21:52 36 ***************** 122 2023-07-10 21:53 ? - 123 2023-07-10 21:54 37 ****************** 124 2023-07-10 21:55 37 ****************** 125 2023-07-10 21:56 36 ***************** 126 2023-07-10 21:57 36 ***************** 127 2023-07-10 21:58 35 **************** 0 2023-07-10 21:59 35 **************** 1 2023-07-10 22:00 35 **************** 2 2023-07-10 22:01 36 ***************** 3 2023-07-10 22:02 37 ****************** 4 2023-07-10 22:03 37 ****************** 5 2023-07-10 22:04 36 ***************** 6 2023-07-10 22:05 36 ***************** 7 2023-07-10 22:06 35 **************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 230 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS