/dev/sda === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green Device Model: WDC WD10EADS-65L5B1 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.5, 3.0 Gb/s Local Time is: Fri Apr 13 17:30:01 2018 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 128 (quiet), recommended: 128 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Unavailable Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (22800) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 262) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 35 3 Spin_Up_Time POS--K 162 160 021 - 6891 4 Start_Stop_Count -O--CK 093 093 000 - 7477 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 042 042 000 - 43004 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 094 094 000 - 6194 192 Power-Off_Retract_Count -O--CK 200 200 000 - 195 193 Load_Cycle_Count -O--CK 198 198 000 - 7477 194 Temperature_Celsius -O---K 115 092 000 - 35 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 30 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 30 [5] occurred at disk power-on lifetime: 6004 hours (250 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 20 00 00 3a 39 c7 a0 e0 00 Error: UNC 32 sectors at LBA = 0x3a39c7a0 = 976865184 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 39 00 c7 3a a0 e0 00 00:02:07.828 READ DMA EXT 25 00 00 00 20 00 39 00 c7 3a 80 e0 00 00:02:07.827 READ DMA EXT 25 00 00 01 00 00 39 00 ce 3a 80 e0 00 00:02:07.827 READ DMA EXT 25 00 00 01 00 00 39 00 cd 3a 80 e0 00 00:02:07.826 READ DMA EXT 25 00 00 01 00 00 39 00 cc 3a 80 e0 00 00:02:07.826 READ DMA EXT Error 29 [4] occurred at disk power-on lifetime: 6004 hours (250 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 3a 39 c7 80 e0 00 Error: UNC 256 sectors at LBA = 0x3a39c780 = 976865152 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 39 00 c7 3a 80 e0 00 00:02:04.787 READ DMA EXT 25 00 00 00 20 00 39 00 c7 3a 80 e0 00 00:02:04.787 READ DMA EXT 25 00 00 00 20 00 39 00 c7 3a 60 e0 00 00:02:04.786 READ DMA EXT 25 00 00 01 00 00 39 00 c8 3a 60 e0 00 00:02:04.786 READ DMA EXT 25 00 00 01 00 00 39 00 ce 3a 60 e0 00 00:02:04.785 READ DMA EXT Error 28 [3] occurred at disk power-on lifetime: 6004 hours (250 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 3a 39 c7 60 e0 00 Error: UNC 256 sectors at LBA = 0x3a39c760 = 976865120 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 39 00 c7 3a 60 e0 00 00:02:01.878 READ DMA EXT 25 00 00 00 20 00 39 00 c7 3a 60 e0 00 00:02:01.878 READ DMA EXT 25 00 00 00 20 00 39 00 c7 3a 40 e0 00 00:02:01.877 READ DMA EXT 25 00 00 01 00 00 39 00 c9 3a 40 e0 00 00:02:01.877 READ DMA EXT 25 00 00 01 00 00 39 00 c8 3a 40 e0 00 00:02:01.876 READ DMA EXT Error 27 [2] occurred at disk power-on lifetime: 6004 hours (250 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 3a 39 c7 40 e0 00 Error: UNC 256 sectors at LBA = 0x3a39c740 = 976865088 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 39 00 c7 3a 40 e0 00 00:01:58.571 READ DMA EXT 25 00 00 00 20 00 39 00 c7 3a 40 e0 00 00:01:58.571 READ DMA EXT 25 00 00 00 20 00 39 00 c7 3a 20 e0 00 00:01:58.570 READ DMA EXT 25 00 00 01 00 00 39 00 ca 3a 20 e0 00 00:01:58.570 READ DMA EXT 25 00 00 01 00 00 39 00 c9 3a 20 e0 00 00:01:58.569 READ DMA EXT Error 26 [1] occurred at disk power-on lifetime: 6004 hours (250 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 3a 39 c7 20 e0 00 Error: UNC 256 sectors at LBA = 0x3a39c720 = 976865056 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 39 00 c7 3a 20 e0 00 00:01:55.528 READ DMA EXT 25 00 00 00 20 00 39 00 c7 3a 20 e0 00 00:01:55.527 READ DMA EXT 25 00 00 00 20 00 39 00 c7 3a 00 e0 00 00:01:55.527 READ DMA EXT 25 00 00 01 00 00 39 00 cb 3a 00 e0 00 00:01:55.526 READ DMA EXT 25 00 00 01 00 00 39 00 ca 3a 00 e0 00 00:01:55.526 READ DMA EXT Error 25 [0] occurred at disk power-on lifetime: 6004 hours (250 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 3a 39 c7 00 e0 00 Error: UNC 256 sectors at LBA = 0x3a39c700 = 976865024 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 39 00 c7 3a 00 e0 00 00:01:52.353 READ DMA EXT 25 00 00 00 20 00 39 00 c7 3a 00 e0 00 00:01:52.353 READ DMA EXT 25 00 00 00 20 00 39 00 c6 3a e0 e0 00 00:01:52.353 READ DMA EXT 25 00 00 01 00 00 39 00 cb 3a e0 e0 00 00:01:52.352 READ DMA EXT 25 00 00 01 00 00 39 00 ca 3a e0 e0 00 00:01:52.352 READ DMA EXT Error 24 [23] occurred at disk power-on lifetime: 6004 hours (250 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 3a 39 c6 e0 e0 00 Error: UNC 256 sectors at LBA = 0x3a39c6e0 = 976864992 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 39 00 c6 3a e0 e0 00 00:01:49.303 READ DMA EXT 25 00 00 00 20 00 39 00 c6 3a e0 e0 00 00:01:49.303 READ DMA EXT 25 00 00 00 20 00 39 00 c6 3a c0 e0 00 00:01:49.302 READ DMA EXT 25 00 00 01 00 00 39 00 cc 3a c0 e0 00 00:01:49.302 READ DMA EXT 25 00 00 01 00 00 39 00 cb 3a c0 e0 00 00:01:49.301 READ DMA EXT Error 23 [22] occurred at disk power-on lifetime: 6004 hours (250 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 3a 39 c6 c0 e0 00 Error: UNC 256 sectors at LBA = 0x3a39c6c0 = 976864960 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 39 00 c6 3a c0 e0 00 00:01:46.224 READ DMA EXT 25 00 00 00 20 00 39 00 c6 3a c0 e0 00 00:01:46.224 READ DMA EXT 25 00 00 00 20 00 39 00 c6 3a a0 e0 00 00:01:46.223 READ DMA EXT 25 00 00 01 00 00 39 00 cd 3a a0 e0 00 00:01:46.212 READ DMA EXT 25 00 00 01 00 00 39 00 cc 3a a0 e0 00 00:01:46.212 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 34466 - # 2 Short captive Completed without error 00% 22679 - # 3 Short offline Completed without error 00% 22678 - # 4 Short offline Completed without error 00% 16932 - # 5 Short offline Completed without error 00% 14650 - # 6 Short offline Completed without error 00% 11810 - # 7 Short offline Completed without error 00% 5568 - # 8 Short offline Completed without error 00% 4817 - # 9 Short offline Completed without error 00% 4553 - #10 Short offline Completed without error 00% 3168 - #11 Short offline Completed without error 00% 2258 - #12 Short offline Completed without error 00% 2236 - #13 Short offline Completed without error 00% 1838 - #14 Short offline Completed without error 00% 1403 - #15 Short offline Completed without error 00% 0 - #16 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 27/35 Celsius Lifetime Min/Max Temperature: 26/58 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (122) Index Estimated Time Temperature Celsius 123 2018-04-13 09:33 35 **************** ... ..( 37 skipped). .. **************** 161 2018-04-13 10:11 35 **************** 162 2018-04-13 10:12 34 *************** ... ..( 77 skipped). .. *************** 240 2018-04-13 11:30 34 *************** 241 2018-04-13 11:31 33 ************** 242 2018-04-13 11:32 34 *************** ... ..(122 skipped). .. *************** 365 2018-04-13 13:35 34 *************** 366 2018-04-13 13:36 35 **************** ... ..( 8 skipped). .. **************** 375 2018-04-13 13:45 35 **************** 376 2018-04-13 13:46 34 *************** ... ..(103 skipped). .. *************** 2 2018-04-13 15:30 34 *************** 3 2018-04-13 15:31 ? - 4 2018-04-13 15:32 27 ******** 5 2018-04-13 15:33 28 ********* 6 2018-04-13 15:34 28 ********* 7 2018-04-13 15:35 28 ********* 8 2018-04-13 15:36 29 ********** 9 2018-04-13 15:37 29 ********** 10 2018-04-13 15:38 30 *********** ... ..( 3 skipped). .. *********** 14 2018-04-13 15:42 30 *********** 15 2018-04-13 15:43 31 ************ ... ..( 3 skipped). .. ************ 19 2018-04-13 15:47 31 ************ 20 2018-04-13 15:48 32 ************* ... ..( 3 skipped). .. ************* 24 2018-04-13 15:52 32 ************* 25 2018-04-13 15:53 33 ************** ... ..( 3 skipped). .. ************** 29 2018-04-13 15:57 33 ************** 30 2018-04-13 15:58 34 *************** ... ..( 23 skipped). .. *************** 54 2018-04-13 16:22 34 *************** 55 2018-04-13 16:23 35 **************** ... ..( 66 skipped). .. **************** 122 2018-04-13 17:30 35 **************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x8000 4 9447 Vendor specific /dev/sdb === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 850 EVO 250GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EMT02B6Q User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Apr 13 17:30:01 2018 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 133) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 097 097 000 - 14623 12 Power_Cycle_Count -O--CK 099 099 000 - 949 177 Wear_Leveling_Count PO--C- 097 097 000 - 57 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 068 043 000 - 32 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 217 241 Total_LBAs_Written -O--CK 099 099 000 - 20357876068 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: SCT command executing in background (5) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 30/40 Celsius Lifetime Min/Max Temperature: 0/70 Celsius Under/Over Temperature Limit Count: 4294967295/4294901760 SMART Status: 0xffff (Reserved) SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (15) Index Estimated Time Temperature Celsius 16 2018-04-12 20:20 ? - ... ..(110 skipped). .. - 127 2018-04-13 14:50 ? - 0 2018-04-13 15:00 40 ********************* 1 2018-04-13 15:10 30 *********** 2 2018-04-13 15:20 31 ************ 3 2018-04-13 15:30 32 ************* ... ..( 3 skipped). .. ************* 7 2018-04-13 16:10 32 ************* 8 2018-04-13 16:20 33 ************** 9 2018-04-13 16:30 33 ************** 10 2018-04-13 16:40 33 ************** 11 2018-04-13 16:50 32 ************* 12 2018-04-13 17:00 33 ************** 13 2018-04-13 17:10 32 ************* 14 2018-04-13 17:20 32 ************* 15 2018-04-13 17:30 32 ************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC