/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.9.16-1-MANJARO] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA (AF) Device Model: WDC WD3200BPVT-22JJ5T0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 320,072,933,376 bytes [320 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Mon Nov 22 06:24:44 2021 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 7980) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 81) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 80 3 Spin_Up_Time POS--K 144 138 021 - 1758 4 Start_Stop_Count -O--CK 064 064 000 - 36475 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 063 063 000 - 27691 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 084 084 000 - 16474 191 G-Sense_Error_Rate -O--CK 001 001 000 - 497 192 Power-Off_Retract_Count -O--CK 200 200 000 - 623 193 Load_Cycle_Count -O--CK 001 001 000 - 2589116 194 Temperature_Celsius -O---K 110 099 000 - 33 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 179 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 179 [10] occurred at disk power-on lifetime: 941 hours (39 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 0b 51 f9 67 e0 00 Error: UNC 1 sectors at LBA = 0x0b51f967 = 189921639 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 0b 51 f9 67 e0 00 01:00:06.816 READ DMA EXT 35 00 00 00 01 00 00 0b 51 f9 66 e0 00 01:00:06.815 WRITE DMA EXT 25 00 00 00 01 00 00 0b 51 f9 66 e0 00 01:00:06.815 READ DMA EXT 25 00 00 00 01 00 00 0b 51 f9 67 e0 00 01:00:03.949 READ DMA EXT 25 00 00 00 01 00 00 0b 51 f9 66 e0 00 01:00:03.949 READ DMA EXT Error 178 [9] occurred at disk power-on lifetime: 941 hours (39 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 0b 51 f9 67 e0 00 Error: UNC 1 sectors at LBA = 0x0b51f967 = 189921639 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 0b 51 f9 67 e0 00 01:00:03.949 READ DMA EXT 25 00 00 00 01 00 00 0b 51 f9 66 e0 00 01:00:03.949 READ DMA EXT 35 00 00 00 01 00 00 0b 51 f9 66 e0 00 01:00:03.948 WRITE DMA EXT 35 00 00 00 01 00 00 0b 51 f9 65 e0 00 01:00:03.948 WRITE DMA EXT 35 00 00 00 01 00 00 0b 51 f9 66 e0 00 01:00:03.948 WRITE DMA EXT Error 177 [8] occurred at disk power-on lifetime: 941 hours (39 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 0b 51 f9 66 e0 00 Error: UNC 1 sectors at LBA = 0x0b51f966 = 189921638 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 0b 51 f9 66 e0 00 01:00:01.077 READ DMA EXT 35 00 00 00 01 00 00 0b 51 f9 65 e0 00 01:00:01.076 WRITE DMA EXT 25 00 00 00 01 00 00 0b 51 f9 65 e0 00 01:00:01.076 READ DMA EXT 25 00 00 00 01 00 00 0b 51 f9 66 e0 00 00:59:58.210 READ DMA EXT 25 00 00 00 01 00 00 0b 51 f9 65 e0 00 00:59:58.210 READ DMA EXT Error 176 [7] occurred at disk power-on lifetime: 941 hours (39 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 0b 51 f9 66 e0 00 Error: UNC 1 sectors at LBA = 0x0b51f966 = 189921638 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 0b 51 f9 66 e0 00 00:59:58.210 READ DMA EXT 25 00 00 00 01 00 00 0b 51 f9 65 e0 00 00:59:58.210 READ DMA EXT 35 00 00 00 01 00 00 0b 51 f9 65 e0 00 00:59:58.209 WRITE DMA EXT 35 00 00 00 01 00 00 0b 51 f9 64 e0 00 00:59:58.209 WRITE DMA EXT 35 00 00 00 01 00 00 0b 51 f9 65 e0 00 00:59:58.209 WRITE DMA EXT Error 175 [6] occurred at disk power-on lifetime: 941 hours (39 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 0b 51 f9 65 e0 00 Error: UNC 1 sectors at LBA = 0x0b51f965 = 189921637 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 0b 51 f9 65 e0 00 00:59:55.338 READ DMA EXT 35 00 00 00 01 00 00 0b 51 f9 64 e0 00 00:59:55.337 WRITE DMA EXT 25 00 00 00 01 00 00 0b 51 f9 64 e0 00 00:59:55.337 READ DMA EXT 25 00 00 00 01 00 00 0b 51 f9 65 e0 00 00:59:52.471 READ DMA EXT 25 00 00 00 01 00 00 0b 51 f9 64 e0 00 00:59:52.471 READ DMA EXT Error 174 [5] occurred at disk power-on lifetime: 941 hours (39 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 0b 51 f9 65 e0 00 Error: UNC 1 sectors at LBA = 0x0b51f965 = 189921637 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 0b 51 f9 65 e0 00 00:59:52.471 READ DMA EXT 25 00 00 00 01 00 00 0b 51 f9 64 e0 00 00:59:52.471 READ DMA EXT 35 00 00 00 01 00 00 0b 51 f9 64 e0 00 00:59:52.470 WRITE DMA EXT 35 00 00 00 01 00 00 0b 51 f9 63 e0 00 00:59:52.470 WRITE DMA EXT 35 00 00 00 01 00 00 0b 51 f9 64 e0 00 00:59:52.470 WRITE DMA EXT Error 173 [4] occurred at disk power-on lifetime: 941 hours (39 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 0b 51 f9 64 e0 00 Error: UNC 1 sectors at LBA = 0x0b51f964 = 189921636 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 0b 51 f9 64 e0 00 00:59:49.600 READ DMA EXT 35 00 00 00 01 00 00 0b 51 f9 63 e0 00 00:59:49.599 WRITE DMA EXT 25 00 00 00 01 00 00 0b 51 f9 63 e0 00 00:59:49.599 READ DMA EXT 25 00 00 00 01 00 00 0b 51 f9 64 e0 00 00:59:46.733 READ DMA EXT 25 00 00 00 01 00 00 0b 51 f9 63 e0 00 00:59:46.733 READ DMA EXT Error 172 [3] occurred at disk power-on lifetime: 941 hours (39 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 0b 51 f9 64 e0 00 Error: UNC 1 sectors at LBA = 0x0b51f964 = 189921636 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 0b 51 f9 64 e0 00 00:59:46.733 READ DMA EXT 25 00 00 00 01 00 00 0b 51 f9 63 e0 00 00:59:46.733 READ DMA EXT 35 00 00 00 01 00 00 0b 51 f9 63 e0 00 00:59:46.732 WRITE DMA EXT 35 00 00 00 01 00 00 0b 51 f9 62 e0 00 00:59:46.732 WRITE DMA EXT 35 00 00 00 01 00 00 0b 51 f9 63 e0 00 00:59:46.732 WRITE DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Aborted by host 30% 17768 - # 2 Extended offline Completed without error 00% 13947 - # 3 Short offline Completed without error 00% 13945 - # 4 Extended offline Aborted by host 90% 7802 - # 5 Extended offline Aborted by host 90% 7802 - # 6 Short offline Completed without error 00% 7801 - # 7 Short offline Completed without error 00% 5354 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 17/33 Celsius Lifetime Min/Max Temperature: 0/44 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (22) Index Estimated Time Temperature Celsius 23 2021-11-22 04:17 26 ******* 24 2021-11-22 04:18 26 ******* 25 2021-11-22 04:19 26 ******* 26 2021-11-22 04:20 27 ******** ... ..( 9 skipped). .. ******** 36 2021-11-22 04:30 27 ******** 37 2021-11-22 04:31 28 ********* ... ..( 4 skipped). .. ********* 42 2021-11-22 04:36 28 ********* 43 2021-11-22 04:37 29 ********** ... ..( 6 skipped). .. ********** 50 2021-11-22 04:44 29 ********** 51 2021-11-22 04:45 30 *********** ... ..( 16 skipped). .. *********** 68 2021-11-22 05:02 30 *********** 69 2021-11-22 05:03 31 ************ ... ..( 42 skipped). .. ************ 112 2021-11-22 05:46 31 ************ 113 2021-11-22 05:47 32 ************* ... ..( 35 skipped). .. ************* 21 2021-11-22 06:23 32 ************* 22 2021-11-22 06:24 33 ************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 30342 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 8995 Vendor specific