/dev/sda smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.10.11+bpo-amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar P7K500 Device Model: Hitachi HDP725050GLA360 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: GM4OA5CA User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database 7.3/5528 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed Oct 9 16:05:06 2024 +05 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 7890) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 131) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 100 100 054 - 0 3 Spin_Up_Time POS--- 131 131 024 - 300 (Average 287) 4 Start_Stop_Count -O--C- 100 100 000 - 840 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 12 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 131 131 020 - 29 9 Power_On_Hours -O--C- 093 093 000 - 51424 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 771 192 Power-Off_Retract_Count -O--CK 100 100 000 - 926 193 Load_Cycle_Count -O--C- 100 100 000 - 926 194 Temperature_Celsius -O---- 150 150 000 - 40 (Min/Max 4/53) 196 Reallocated_Event_Count -O--CK 100 100 000 - 12 197 Current_Pending_Sector -O---K 100 100 000 - 1 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 106 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 106 [1] occurred at disk power-on lifetime: 50189 hours (2091 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 00 54 7a 69 e0 00 Error: UNC at LBA = 0x00547a69 = 5536361 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 da d8 00 01 00 00 00 54 7a 69 e0 00 00:39:42.400 READ VERIFY SECTOR(S) EXT 25 da d8 00 01 00 00 00 00 00 00 e0 00 00:39:42.400 READ DMA EXT 42 da d8 00 02 00 00 00 54 7a 69 e0 00 00:39:38.100 READ VERIFY SECTOR(S) EXT 42 da d8 00 02 00 00 00 54 7a 67 e0 00 00:39:38.100 READ VERIFY SECTOR(S) EXT 25 da d8 00 01 00 00 00 00 00 00 e0 00 00:39:38.100 READ DMA EXT Error 105 [0] occurred at disk power-on lifetime: 50189 hours (2091 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 02 00 00 00 54 7a 69 e0 00 Error: UNC at LBA = 0x00547a69 = 5536361 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 da d8 00 02 00 00 00 54 7a 69 e0 00 00:39:38.100 READ VERIFY SECTOR(S) EXT 42 da d8 00 02 00 00 00 54 7a 67 e0 00 00:39:38.100 READ VERIFY SECTOR(S) EXT 25 da d8 00 01 00 00 00 00 00 00 e0 00 00:39:38.100 READ DMA EXT 42 da d8 00 04 00 00 00 54 7a 6b e0 00 00:39:38.100 READ VERIFY SECTOR(S) EXT 25 da d8 00 01 00 00 00 00 00 00 e0 00 00:39:38.100 READ DMA EXT Error 104 [3] occurred at disk power-on lifetime: 50189 hours (2091 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 02 00 00 00 54 7a 69 e0 00 Error: UNC at LBA = 0x00547a69 = 5536361 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 da d8 00 04 00 00 00 54 7a 67 e0 00 00:39:33.800 READ VERIFY SECTOR(S) EXT 25 da d8 00 01 00 00 00 00 00 00 e0 00 00:39:33.800 READ DMA EXT 42 da d8 00 08 00 00 00 54 7a 67 e0 00 00:39:29.500 READ VERIFY SECTOR(S) EXT 42 da d8 00 08 00 00 00 54 7a 5f e0 00 00:39:29.500 READ VERIFY SECTOR(S) EXT 25 da d8 00 01 00 00 00 00 00 00 e0 00 00:39:29.500 READ DMA EXT Error 103 [2] occurred at disk power-on lifetime: 50189 hours (2091 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 06 00 00 00 54 7a 69 e0 00 Error: UNC at LBA = 0x00547a69 = 5536361 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 da d8 00 08 00 00 00 54 7a 67 e0 00 00:39:29.500 READ VERIFY SECTOR(S) EXT 42 da d8 00 08 00 00 00 54 7a 5f e0 00 00:39:29.500 READ VERIFY SECTOR(S) EXT 25 da d8 00 01 00 00 00 00 00 00 e0 00 00:39:29.500 READ DMA EXT 42 da d8 00 10 00 00 00 54 7a 6f e0 00 00:39:29.500 READ VERIFY SECTOR(S) EXT 25 da d8 00 01 00 00 00 00 00 00 e0 00 00:39:29.500 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 50277 - # 2 Short offline Completed without error 00% 50277 - # 3 Short offline Completed without error 00% 50277 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 40 Celsius Power Cycle Min/Max Temperature: 39/41 Celsius Lifetime Min/Max Temperature: 4/53 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (56) Index Estimated Time Temperature Celsius 57 2024-10-09 13:58 35 **************** ... ..( 3 skipped). .. **************** 61 2024-10-09 14:02 35 **************** 62 2024-10-09 14:03 34 *************** 63 2024-10-09 14:04 35 **************** ... ..( 12 skipped). .. **************** 76 2024-10-09 14:17 35 **************** 77 2024-10-09 14:18 34 *************** ... ..( 30 skipped). .. *************** 108 2024-10-09 14:49 34 *************** 109 2024-10-09 14:50 ? - 110 2024-10-09 14:51 29 ********** 111 2024-10-09 14:52 30 *********** 112 2024-10-09 14:53 30 *********** 113 2024-10-09 14:54 31 ************ 114 2024-10-09 14:55 31 ************ 115 2024-10-09 14:56 32 ************* ... ..( 2 skipped). .. ************* 118 2024-10-09 14:59 32 ************* 119 2024-10-09 15:00 33 ************** 120 2024-10-09 15:01 34 *************** ... ..( 4 skipped). .. *************** 125 2024-10-09 15:06 34 *************** 126 2024-10-09 15:07 ? - 127 2024-10-09 15:08 ? - 0 2024-10-09 15:09 ? - 1 2024-10-09 15:10 29 ********** 2 2024-10-09 15:11 29 ********** 3 2024-10-09 15:12 30 *********** 4 2024-10-09 15:13 31 ************ 5 2024-10-09 15:14 31 ************ 6 2024-10-09 15:15 31 ************ 7 2024-10-09 15:16 32 ************* 8 2024-10-09 15:17 32 ************* 9 2024-10-09 15:18 33 ************** 10 2024-10-09 15:19 33 ************** 11 2024-10-09 15:20 33 ************** 12 2024-10-09 15:21 34 *************** ... ..( 3 skipped). .. *************** 16 2024-10-09 15:25 34 *************** 17 2024-10-09 15:26 35 **************** ... ..( 4 skipped). .. **************** 22 2024-10-09 15:31 35 **************** 23 2024-10-09 15:32 36 ***************** 24 2024-10-09 15:33 36 ***************** 25 2024-10-09 15:34 ? - 26 2024-10-09 15:35 40 ********************* ... ..( 4 skipped). .. ********************* 31 2024-10-09 15:40 40 ********************* 32 2024-10-09 15:41 41 ********************** 33 2024-10-09 15:42 40 ********************* ... ..( 7 skipped). .. ********************* 41 2024-10-09 15:50 40 ********************* 42 2024-10-09 15:51 39 ******************** 43 2024-10-09 15:52 39 ******************** 44 2024-10-09 15:53 39 ******************** 45 2024-10-09 15:54 40 ********************* ... ..( 3 skipped). .. ********************* 49 2024-10-09 15:58 40 ********************* 50 2024-10-09 15:59 39 ******************** 51 2024-10-09 16:00 39 ******************** 52 2024-10-09 16:01 40 ********************* ... ..( 3 skipped). .. ********************* 56 2024-10-09 16:05 40 ********************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdb smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.10.11+bpo-amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST1000DM003-9YN162 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: CC4H User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database 7.3/5528 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Oct 9 16:05:06 2024 +05 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 575) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 115) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 120 087 006 - 237492584 3 Spin_Up_Time PO---- 098 096 000 - 0 4 Start_Stop_Count -O--CK 096 096 020 - 4764 5 Reallocated_Sector_Ct PO--CK 079 051 036 - 27664 7 Seek_Error_Rate POSR-- 078 060 030 - 69676307 9 Power_On_Hours -O--CK 049 049 000 - 45150 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 096 096 020 - 4660 183 Runtime_Bad_Block -O--CK 092 092 000 - 8 184 End-to-End_Error -O--CK 099 099 099 NOW 1 187 Reported_Uncorrect -O--CK 001 001 000 - 136 188 Command_Timeout -O--CK 100 093 000 - 10 10 60 189 High_Fly_Writes -O-RCK 099 099 000 - 1 190 Airflow_Temperature_Cel -O---K 064 054 045 - 36 (Min/Max 35/36) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 589 193 Load_Cycle_Count -O--CK 094 094 000 - 13233 194 Temperature_Celsius -O---K 036 046 000 - 36 (0 8 0 0 0) 197 Current_Pending_Sector -O--C- 100 001 000 - 0 198 Offline_Uncorrectable ----C- 100 001 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 45235h+38m+17.525s 241 Total_LBAs_Written ------ 100 253 000 - 90283161141361 242 Total_LBAs_Read ------ 100 253 000 - 246030763249455 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 4496 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 5067 Device vendor specific log 0xbd GPL VS 512 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 25 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 25 [4] occurred at disk power-on lifetime: 45136 hours (1880 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 74 70 6a 60 00 00 Error: UNC at LBA = 0x74706a60 = 1953524320 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 98 00 00 74 70 6b 68 40 00 03:20:45.157 READ FPDMA QUEUED 60 00 00 00 50 00 00 74 70 6b 10 40 00 03:20:45.157 READ FPDMA QUEUED 60 00 00 00 30 00 00 74 70 6a d8 40 00 03:20:45.157 READ FPDMA QUEUED 60 00 00 00 a8 00 00 74 70 6a 28 40 00 03:20:45.157 READ FPDMA QUEUED 60 00 00 00 20 00 00 74 70 6a 00 40 00 03:20:45.156 READ FPDMA QUEUED Error 24 [3] occurred at disk power-on lifetime: 45136 hours (1880 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 74 70 6b 70 00 00 Error: UNC at LBA = 0x74706b70 = 1953524592 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 00 00 08 08 40 00 03:20:00.485 READ FPDMA QUEUED 60 00 00 00 08 00 00 00 00 08 00 40 00 03:20:00.484 READ FPDMA QUEUED 60 00 00 00 08 00 00 74 70 6b 70 40 00 03:20:00.451 READ FPDMA QUEUED 60 00 00 00 08 00 00 74 70 6b 68 40 00 03:20:00.376 READ FPDMA QUEUED 60 00 00 00 08 00 00 00 0c 87 f0 40 00 03:20:00.376 READ FPDMA QUEUED Error 23 [2] occurred at disk power-on lifetime: 45133 hours (1880 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 74 70 6b 70 00 00 Error: UNC at LBA = 0x74706b70 = 1953524592 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 74 70 6b 70 40 00 00:06:22.286 READ FPDMA QUEUED 60 00 00 00 08 00 00 74 70 6b 68 40 00 00:06:22.278 READ FPDMA QUEUED ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:06:22.278 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 00 00:06:22.278 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:06:22.277 IDENTIFY DEVICE Error 22 [1] occurred at disk power-on lifetime: 45133 hours (1880 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 74 70 69 d8 00 00 Error: UNC at LBA = 0x747069d8 = 1953524184 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 74 70 68 08 40 00 00:05:24.758 READ FPDMA QUEUED 60 00 00 00 10 00 00 74 70 69 e8 40 00 00:05:24.737 READ FPDMA QUEUED 60 00 00 00 08 00 00 74 70 69 d8 40 00 00:05:24.737 READ FPDMA QUEUED 60 00 00 00 08 00 00 74 70 68 00 40 00 00:05:24.736 READ FPDMA QUEUED ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:05:24.736 SET FEATURES [Enable SATA feature] Error 21 [0] occurred at disk power-on lifetime: 45133 hours (1880 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 74 70 68 f8 00 00 Error: UNC at LBA = 0x747068f8 = 1953523960 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 10 00 00 74 70 69 e8 40 00 00:05:11.797 READ FPDMA QUEUED 60 00 00 00 08 00 00 74 70 69 d8 40 00 00:05:11.797 READ FPDMA QUEUED 60 00 00 01 d0 00 00 74 70 68 00 40 00 00:05:11.797 READ FPDMA QUEUED 60 00 00 01 f8 00 00 00 00 02 08 40 00 00:05:11.796 READ FPDMA QUEUED 60 00 00 00 f8 00 00 00 00 01 08 40 00 00:05:11.794 READ FPDMA QUEUED Error 20 [19] occurred at disk power-on lifetime: 45133 hours (1880 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 74 70 68 e0 00 00 Error: UNC at LBA = 0x747068e0 = 1953523936 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 74 70 68 e0 40 00 00:03:49.724 READ FPDMA QUEUED 60 00 00 00 08 00 00 74 70 68 d8 40 00 00:03:48.536 READ FPDMA QUEUED 60 00 00 00 08 00 00 74 70 68 d0 40 00 00:03:47.140 READ FPDMA QUEUED 60 00 00 00 08 00 00 74 70 68 c8 40 00 00:03:46.483 READ FPDMA QUEUED 60 00 00 00 08 00 00 74 70 68 c0 40 00 00:03:46.473 READ FPDMA QUEUED Error 19 [18] occurred at disk power-on lifetime: 45133 hours (1880 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 74 70 68 60 00 00 Error: UNC at LBA = 0x74706860 = 1953523808 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 10 00 00 74 70 69 e8 40 00 00:03:36.480 READ FPDMA QUEUED 60 00 00 00 08 00 00 74 70 69 d8 40 00 00:03:36.480 READ FPDMA QUEUED 60 00 00 01 d0 00 00 74 70 68 00 40 00 00:03:36.480 READ FPDMA QUEUED 60 00 00 01 f8 00 00 00 00 02 08 40 00 00:03:36.478 READ FPDMA QUEUED 60 00 00 00 f8 00 00 00 00 01 08 40 00 00:03:36.476 READ FPDMA QUEUED Error 18 [17] occurred at disk power-on lifetime: 45133 hours (1880 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 74 70 68 60 00 00 Error: UNC at LBA = 0x74706860 = 1953523808 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 01 00 00 00 00 08 00 40 00 00:03:19.226 READ FPDMA QUEUED 60 00 00 00 08 00 00 74 70 68 60 40 00 00:03:19.226 READ FPDMA QUEUED 60 00 00 00 01 00 00 00 00 08 00 40 00 00:03:19.216 READ FPDMA QUEUED 60 00 00 00 08 00 00 74 70 68 58 40 00 00:03:19.215 READ FPDMA QUEUED 60 00 00 00 08 00 00 00 00 08 08 40 00 00:03:19.211 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 32908 - # 2 Short offline Completed without error 00% 32908 - # 3 Short offline Completed without error 00% 32908 - # 4 Short offline Completed without error 00% 32771 - # 5 Short offline Completed without error 00% 32767 - # 6 Short offline Completed without error 00% 20262 - # 7 Short offline Aborted by host 10% 20262 - # 8 Short offline Completed without error 00% 13213 - # 9 Short offline Completed without error 00% 9225 - #10 Short offline Completed without error 00% 9223 - #11 Short offline Completed without error 00% 9218 - #12 Short offline Completed without error 00% 2621 - #13 Short offline Completed without error 00% 2582 - #14 Short offline Completed without error 00% 2578 - #15 Short offline Completed without error 00% 2573 - #16 Short offline Completed without error 00% 2563 - #17 Short offline Completed without error 00% 1719 - #18 Short offline Completed without error 00% 1676 - #19 Short offline Completed without error 00% 1676 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 35/36 Celsius Lifetime Min/Max Temperature: 8/46 Celsius Under/Over Temperature Limit Count: 0/0 SCT Data Table command not supported SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 7 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS